See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Meelis Pohlak

https://etis.ee/CV/Meelis_Pohlak/est
26.05.1975
6203254
meelis.pohlak@ttu.ee

Teenistuskäik

Töökohad ja ametid
01.01.2017–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Vanemteadur (1,00)
01.09.2011–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootearenduse õppetool, Vanemteadur (1,00)
01.09.2008–31.08.2011   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Raalintegreeritud tootmise ja projekteerimise õppetool, Vanemteadur (1,00)
01.01.2008–31.08.2008   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Vanemteadur (1,00)
2002–2007   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Raalintegreeritud tootmise ja projekteerimise õppetool, Teadur (1,00)
2001–2002   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Insener (0,50)
 
 
Haridustee
2002–2007   
Tallinna Tehnikaülikool, doktorantuur
2000–2002   
Tallinna Tehnikaülikool, magistrantuur
1994–2000   
Tallinna Tehnikaülikool, bakalaureuseõpe

Kvalifikatsioon

Teaduskraadid
Meelis Pohlak, doktorikraad, 2007, (juh) Rein Küttner, Rapid Prototyping of Sheet Metal Components with Incremental Sheet Forming Technology (Lehtmetallist komponentide kiirvalmistuse sammvormimistehnoloogia), Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut.
Meelis Pohlak, magistrikraad (teaduskraad), 2002, (juh) Rein Mesila, Prototüüpide kiirvalmistus, Tallinna Tehnikaülikool.
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.13. Mehhanotehnika, automaatika, tööstustehnoloogia; TÄPSUSTUS: Prototüüpide kiirvalmistus; Arvutipõhised toote tehnoloogia- ja materjaliomaduste hindamise meetodid; Lehtmaterjali sammvormimine; Toodete ja protsesside numbriline modelleerimine; Toodete ja protsesside optimeerimine

Jooksvad projektid

Lõppenud projektid

Juhendamisel väitekirjad

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2020
Majak, J.; Shvartsman, B.; Ratas, M.; Bassir, D.; Pohlak, M.; Karjust, K.; Eerme, M. (2020). Higher-order Haar wavelet method for vibration analysis of nanobeams. Materials Today Communications, 25, #101290. DOI: 10.1016/j.mtcomm.2020.101290.
3.1.
2019
Majak, J.; Anton, J.; Õunapuu, E.; Auriemma, F.; Pohlak, M.; Eerme, M.; Klauson, A. (2019). Experimental Evaluation and Numerical Modelling Residual Stresses in Glass Panel. 2018 International Conference on Materials Science and Manufacturing Engineering (MSME 2018) : Paris, France, November 8-10, 2018. Ed. Bassir, D. EDP Sciences, 0223, 1−7. (MATEC Web Conferences; 253). DOI: 10.1051/matecconf/201925302003.
3.1.
2019
Kiitam, I.; Taklaja, P.; Pohlak, M.; Põdra, P.; Palu, I. (2019). Strength Analysis of Medium Voltage Overhead Line Crossarms for Updating Conductor. 2019 Electric Power Quality and Supply Reliability conference (PQ2019) and Symposium of Electrical Engineering and Mechatronics (SEEM2019), Kärdla, 12.-15. juuni 2019. IEEE.
3.1.
2019
Majak, Jüri; Pohlak, Meelis; Eerme, Martin; Shvartsman, Boris (2019). Solving ordinary differential equations with higher order Haar wavelet method. CENTRAL EUROPEAN SYMPOSIUM ON THERMOPHYSICS 2019 (CEST), 2116: International Conference on Numerical Analysis and Applied Mathematics 2018, ICNAAM 2018. Ed. Simos T.E.,Simos T.E.,Simos T.E.,Simos T.E.,Tsitouras C.,Simos. AIP Conference Proceedings: American Institute of Physics Inc. (CENTRAL EUROPEAN SYMPOSIUM ON THERMOPHYSICS 2019 (CEST); Nr330002). DOI: 10.1063/1.5114340.
1.1.
2018
Majak, J.; Pohlak, M.; Karjust, K.; Eerme, M.; Kurnitski, J.; Shvartsman, B. S. (2018). New higher order Haar wavelet method: Application to FGM structures. Composite Structures, 201, 72−78. DOI: 10.1016/j.compstruct.2018.06.013.
3.1.
2018
Kangru, T.; Riives, J.; Otto, T.; Pohlak, M.; Mahmood, K. (2018). Intelligent Decision Making Approach for Performance Evaluation of a robot-based Manufacturing Cell. Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition: IMECE2018, November 9-15, 2018. Pittsburgh, PA, USA: ASME, Paper No. IMECE2018-86666. (Volume 2: Advanced Manufacturing). DOI: 10.1115/IMECE2018-86666.
1.1.
2017
Haavajõe, A.; Mikola, M.; Osali, H.; Pohlak, M.; Herranen, H. (2017). Experimental study of steered fibre composite production. Proceedings of the Estonian Academy of Sciences, 66 (3), 295−299. DOI: 10.3176/proc.2017.3.09.
3.2.
2017
Shevtshenko, E.; Karaulova, T.; Pohlak, M.; Mahmood, K.; Tamm, M.; Leht, K. (2017). Innovative Management and Implementation of Applied Research Project “Green-Cost Efficient Package Selection”. In: B. Llamas Moya, M. D. Storch de Gracia, L, F. Mazadiego, (Ed.). Case Study of Innovative Projects - Successful Real Cases (143−160). InTech - Open Access Publisher . DOI: 10.5772/67541.
5.2.
2017
Majak, J.; Kirs, M.; Eerme, M.; Pohlak, M.; Shvartsman, B. (2017). Optimal Design with Graphene and Nanomaterials. ICCS20 20th International conference on Composite Materials Proceedings, 1: ICCS20 20th International conference on Composite Materials. Ed. A. J. M. Ferreira, W. Larbi, J. F. Deu, F. Tornabene, N. Fantuzzi. Milano: Societa Editrice Esculapio, 300. (Structural and Computational Mechanics).
5.2.
2017
Majak, J.; Pohlak, M.; Eerme, M.; Väer, K.; Õunapuu, E. (2017). Analysis and design of laminated glass composite panel. Mechcomp3 3rd International conference on mechanics of composites Proceedings, 1: 3rd International conference on mechanics of composites. Ed. A. J. M. Ferreira, E. Viola, F. Tornabene, N. Fantuzzi. Bologna: Societa Editrice Esculapio, 15.
3.1.
2016
Mägi, P.; Krumme, A.; Pohlak, M. (2016). Recycling of PA-12 in Additive Manufacturing and the Improvement of its Mechanical Properties. In: Hussainova, I.; Veinthal, R. (Ed.). Engineering Materials and Tribology (9−14). Trans Tech Publications Ltd. (Key Engineering Materials; 674).10.4028/www.scientific.net/KEM.674.9.
3.1.
2016
Haavajõe, A.; Mikola, M.; Pohlak, M. (2016). Design and Manufacturing of Variable Angle Tow Laminate. In: Hussainova, I.; Veinthal, R. (Ed.). Engineering Materials and Tribology (59−64).24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), Tallinn, Estonia, November 5-6, 2015. Trans Tech Publications Ltd. (Key Engineering Materials; 674).10.4028/www.scientific.net/KEM.674.59.
3.1.
2016
Majak, J.; Shvartsman, B.; Pohlak, M.; Karjust, K.; Eerme, M.; Tungel, E. (2016). Solution of fractional order differential equation by the Haar Wavelet method. Numerical convergence analysis for most commonly used approach. AIP Conference Proceedings, 1738: INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2015, Rhodos, 22–28 September 2015. Ed. T. Simos. USA: AIP Publishing, 1−4. ( 480110). DOI: 10.1063/1.4952346.
3.1.
2016
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Pohlak, M.; Veinthal, R. (2016). Effect of Hot Isostatic Pressing on Cellular Lattice Structures Obtained by Selective Laser Melting. World PM2016 proceedings: World PM2016 Congress & Exhibition, Hamburg, Germany, 9-13 October 2016. European Powder Metallurgy Association, USB.
3.2.
2016
Shevtshenko, E.; Karaulova, T.; Pohlak, M.; Mahmood, K. (2016). Elaboration of framework for green and cost efficient package development for electronic industry. International Conference on Innovative Technologies, IN-TECH 2016. University of Rijeka, 235−238.
5.2.
2016
Majak, J.; Pohlak, M.; Õunapuu, E.; Auriemma, F.; Rämmal, H.; Saarts, S. (2016). ANALYSIS AND DESIGN OF MULTIFUNCTIONAL LAMINATED GLASS COMPOSITE STRUCTURES. ICCE proceedings: 24th Annual International Conference on Composites and Nano Engineering.. Ed. D. Hui. University of New Orleans Press.
5.2.
2016
Majak, J.; Pohlak, M.; Shvartsman, B.; Õunapuu, E.; Kirs M. (2016). Design of multifunctional laminated glass composite panel. ICCS19 19TH INTERNATIONAL CONFERENCE ON COMPOSITE STRUCTURES: Proceedings. Ed. A. J. M. Ferreira. Società Editrice Esculapio, 140.
5.2.
2016
Majak, J.; Pohlak, M.; Shvartsman, B.; Õunapuu, E.; Kirs M. (2016). Plate model for multifunctional laminated glass composite panel. ICCS19 19TH INTERNATIONAL CONFERENCE ON COMPOSITE STRUCTURES: Proceedings. Ed. A. J. M. Ferreira. Società Editrice Esculapio, 140.
5.2.
2016
Majak, J.; Shvartsman, B.; Pohlak, M.; Eerme, M.; Kirs, M. (2016). On accuracy of the haar wavelet method. Mathematical modelling and analysis 2016 : abstracts. Ed. A. Pedas. Eesti Matemaatika Selts, 50.
1.1.
2015
Majak, J.; Shvartsman, B.; Karjust, K.; Mikola, M.; Haavajõe, A.; Pohlak, M. (2015). On the accuracy of the Haar wavelet discretization method. Composites Part B Engineering, 80, 321−327. DOI: 10.1016/j.compositesb.2015.06.008.
1.1.
2015
Majak, J.; Shvartsman, B.; Kirs, M.; Pohlak, M.; Herranen, H. (2015). Convergence theorem for the Haar wavelet based discretization method. Composite Structures, 126, 227−232.10.1016/j.compstruct.2015.02.050.
3.1.
2015
Haavajõe, A.; Mikola, M.; Herranen, H.; Pohlak, M. (2015). MANUFACTURING OF STEERED FIBER COMPOSITE LAMINATE. In: Proceedings of the 10th International Conference of DAAAM Baltic Industrial Engineering 12-13th May 2015, Tallinn, Estonia (21−26). Tallinn University of Technology.
3.2.
2015
Mikola, M.; Haavajõe, A.; Arak, M.; Majak, J.; Pohlak, M.; Shvartsman, B. (2015). ACCURACY ISSUES OF THE HAAR WAVELET METHOD. In: Berezovksi, A.; Tamm, K.; Peets, T. (Ed.). Proceedings of the NSCM28: 28th Nordic Seminar on Computational Mechanics 22 – 23 October, Tallinn, Estonia, 2015 (103−106).. Tallinn: Institute of Cybernetics at Tallinn University of Technology.
6.3.
2015
Pohlak, M. (2015). Sammvormimine – paindlik lehtmetalli vormimistehnoloogia. (2−3)..
6.3.
2015
Pohlak, M.; Veinthal, R. (2015). Metallobjektide 3D printimine – uued võimalused ja väljakutsed. (2−3). .
6.3.
2015
Jõeleht, M.; Kollo, L.; Pohlak, M.; Veinthal, R. (2015). Uued võimalused 3D-printimise valdkonnas- metallide printimine peagi võimalik ka Eestis. (32−35). .
3.4.
2013
Herranen, H.; Saar, T.; Gordon, R.; Pohlak, M.; Lend, H. (2013). Durability Performance Of Semiconductor Strain Gauges In GFRP Laminate. Proceedings of 6th ECCOMAS Conference on Smart Structures and Materials SMART2013: 6th ECCOMAS Conference on Smart Structures and Materials SMART2013. Torino,.
5.2.
2013
Pohlak, M.; Majak, J.; Karjust, K.; Herranen, H.; Lend, H. (2013). Design of functionally graded sandwich panels. Book of Abstracts: 17-th Internation Conference on Composite Materials. Ed. A.J.M.Ferreira. Faculty of Engineering.
1.1.
2012
Majak, J.; Pohlak, M.; Eerme, M.; Velsker, T. (2012). Design of car frontal protection system using neural networks and genetic algorithm. Mechanika, 18 (4), 453−460.
3.1.
2012
Karjust, K.; Pohlak, M; Majak, J. (2012). Adhesion process optimization in reinforced composites. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 2: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Tallinn: Tallinn University of Technology, 633−638.
3.2.
2012
Herranen, H.; Kers, J.; Preden, J.; Talalaev, R.; Eerme, M.; Majak, J.; Pohlak, M.; Allikas, G.; Pabut, O.; Lend, H. (2012). The influence of embedded electronics on the structural performance in carbon fiber laminates. Proceedings of Mechanics of Nano, Micro and Macro Composite Structures 2012: Mechanics of Nano, Micro and Macro Composite Structures, tORINO, 18-20 June 2012. Ed. A. Ferreira, E. Carrera. Torino, Italy,.
3.4.
2012
Allikas, G.; Kers, J.; Aruniit, A.; Herranen, H.; Eerme, M.; Majak, J.; Pohlak, M.; Pabut, O. (2012). Design of light-weight sandwich panels for trailers. Proceedings of the fifteenth European Conference on Composite Materials: Fifteenth European Conference on Composite Materials, Italy, June 24-28, 2012. Venice, Italy,.
5.2.
2012
Majak, J.; Pohlak, M.; Eerme, M.; Kers, J. (2012). Nanoscale vibration analysis of graphene sheets using nonlocal elasticity theory. Proceedings of the International conference on Mechanics of nano, micro and macro composite structures: Mechanics of nano, micro and macro composite structures, Torino, 18-20 juuni 2012. Ed. A. J. M. Ferreira, E. Carrera. Torino: Politecnico di Torino,.
1.1.
2011
Herranen, H.; Pabut, O.; Eerme, M.; Majak, J.; Pohlak, M.; Kers, J.; Saarna, M.; Allikas, G.; Aruniit, A. (2011). Design and Testing of Sandwich Structures with Different Core Materials. Journal of Materials Science of Kaunas University of Technology, 17 (4), 1−6.
3.4.
2011
Majak, J.; Kers, J.; Pohlak, M.; Eerme, M.; Luiga, K. (2011). Wavelet based discretization technique for analysis and design of composite structures. The 18th International Conference on Composite Materials. Composite materials: key to the future: The 18th International Conference on Composite Materials. Ed. Woo Il Lee. Jeju, Lõuna-Korea: The Korean Society of Composite Materials, 1−6.
3.4.
2011
Pohlak, M.; Majak, J.; Pääsuke, K.; Eerme, M.; Kõiv, R. (2011). Multi-objective topology optimization of weight critical structures. 16th International Conference on Composite Structures (ICCS16), Porto, 28-30 June 2011.. Ed. Antonio J. M. Ferreira.
5.2.
2011
Kers, J.; Saarna, M.; Peetsalu, P.; Aruniit, A.; Majak, J.; Pohlak, M.; Herranen, H. (2011). Selection of parameters in adhesive bonding of composite structures. 20th International Baltic Conference, Materials Engineering 2011, Book of Abstracts: 20th International Baltic Conference, Materials Engineering, Kaunas, Lihtuania, October 27-28. Kaunas, Lithuania: Kaunas University of Technology Press, 53−53.
6.2.
2011
Karjust, K.; Kers, J.; Kiolein, I.; Kokla, M.; Küttner, R.; Lavin, J.; Lavrentjev, J.; Lumiste, R.; Lõun, K.; Mõtus, L.; Naams, I.; Otto, T.; Pohlak, M.; Raba, K.; Riives, J.; Reedik, V.; Roosimölder, L.; Saks, A.; Talkop, A.; Tähemaa, T. ... Veinthal, R. (2011). Uuenduslik tootmine : käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2010
Karjust, K.; Pohlak, M.; Majak, J. (2010). Technology Route Planning of Large Composite Parts. International Journal of Material Forming, 3, 631−634. DOI: 10.1007/s12289-010-0849-2.
1.1.
2010
Majak, J.; Pohlak, M. (2010). Decomposition method for solving optimal material orientation problems. Composite Structures, 92 (8), 1839−1845.10.1016/j.compstruct.2010.01.015.
1.1.
2010
Pohlak, M.; Majak, J.; Karjust, K.; Küttner, R. (2010). Multicriteria optimization of large composite parts. Composite Structures, 92 (9), 2146−2152. DOI: 10.1016/j.compstruct.2009.09.039.
1.1.
2010
Majak, J.; Pohlak, M. (2010). Optimal material orientation of linear and non-linear elastic 3D anisotropic materials. Meccanica, 45 (5), 671−680.10.1007/s11012-009-9262-7.
1.1.
2010
Karjust, K.; Pohlak, M.; Majak, J. (2010). Optimal adhesion measuring methods of the glass fiber reinforcement layer. Estonian Journal of Engineering, 16 (4), 297−306.
3.1.
2010
Velsker, T.; Majak, J.; Eerme, M.; Pohlak, M. (2010). Double-curved surface forming process modeling. Kyttner, R.. Proceedings of the 7th International Conference of DAAAM Baltic Industrial engineering : 22-24th April 2010, Tallinn, Estonia (257−262).. Tallinn University of Technology.
3.1.
2010
Pabut, O.; Eerme, M.; Majak, J.; Pohlak, M. (2010). Design Optimization of Structural Components for Fatigue Loading. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn Technical University Press, 131−135.
3.1.
2010
Karjust, K.; Pohlak, M.; Majak, J. (2010). Optimal adhesion measuring methods of the glass-fiber reinforcement layer. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn University of Technology Press, 232−237.
3.1.
2010
Tähemaa, T.; Karjust, K.; Pohlak, M. (2010). ERP and PLM resources in Estonian SME’s. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn University of Technology Press, 386−391.
3.1.
2010
Majak, J.; Pohlak, M.; Küttner, R.; Eerme, M.; Karjust, K.; Kers, J. (2010). A Symbolic-Numerical Algorithm for Material Parameter Identification. Proceedings of the Tenth International Conference on Computational Structures Technology: Tenth International Conference on Computational Structures Technology, Valencia - Spain, 14-17 September 2010. Ed. B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru and M.L. Romero. Civil-Comp Press, 1−14. DOI: 10.4203/ccp.93.133.
3.2.
2010
Majak, J.; Pohlak, M.; Eerme, M.; Karjust, K.; Kers, J. (2010). Haar wavelet based discretization technique for analysis and design of composite plate and shell structures. In: Kollar, L.; Cigany, T.; Karger Kocsis, J. (Ed.). 14th European Conference on Composite Materials (1−10). . Budapest University of Technology.
3.4.
2010
Karjust, K.; Pohlak, M.; Majak, J. (2010). Optimal adhesion area of the glass-fiber reinforcement layer. 14th European Conference on Composite Materials. Ed. Kollar, L.; Cigany, T.; Karger Kocsis, J. Budapest University of Technology.
1.1.
2009
Majak, J.; Pohlak, M.; Eerme, M. (2009). Application of the Haar Wavelet based discretization technique to orthotropic plate and shell problems. Mechanics of Composite Materials, 45 (6), 631−642. DOI: 10.1007/s11029-010-9119-0.
1.1.
2009
Majak, J.; Pohlak, M.; Eerme, M.; Lepikult, T. (2009). Weak formulation based haar wavelet method for solving differential equations. Applied Mathematics and Computation, 211 (2), 488−494. DOI: 10.1016/j.amc.2009.01.089.
1.2.
2009
Pohlak, M.; Majak, J.; Eerme, M. (2009). Engineering optimization of a car frontal protection system component. Estonian Journal of Engineering, 15 (1), 61−72.
3.4.
2009
Majak, J.; Pohlak, M. (2009). Stationary of the strain energy density in anisotropic solids. 8th World Congress on Structural and Multidisciplinary Optimization. Portugal, Lisbon,.
5.2.
2009
Pohlak, M.; Majak, J.; Küttner, R.; Karjust, K. (2009). Multicriteria optimization of large composite parts. 15th International Conference on Composite Structures. Ed. A. J. M. Ferreira. Potugal, Porto: FEUP.
5.2.
2009
Majak, J.; Pohlak, M. (2009). Decomposition method for solving optimal material orientation problems. 15-th International Conference on Composite Structrures. _EditorsAbbr A. J. M. Ferreira. Portugal, Porto: FEUP,.
5.2.
2009
Majak, J.; Pohlak, M.; Küttner, R. (2009). Modeling Constitutive Relation For Woven Polymer-Based Composites. NATO advanced research workshop on “Textile Composites” (ARV conference). _EditorsAbbr David Hui. Kiiev, Ukraina,.
6.3.
2009
Pohlak, M. (2009). Laserpaagutus: virtuaalmudelist saab toode. Inseneeria, 5, 30−32.
1.2.
2008
Majak, J.; Toompalu, S; Pohlak, M. (2008). Material parameters identification by use of hybrid GA. Journal of Achievements of Materials and Manufacturing Engineering, 27, 63−66.
3.1.
2008
Majak, J.; Küttner, R.; Pohlak, M.; Eerme, M.; Karjust, K. (2008). Application of evolutionary methods for solving optimization problems in engineering. Proceedings of NordDesign 2008: NordDesign 2008, Tallinn, August 21-23, 2008. Ed. Roosimölder, L. Tallinn: TTU Press, 39−48.
3.1.
2008
Karjust, K.; Küttner, R.; Pohlak, M. (2008). The production technology considerations of large composite parts. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (251−256). . Tallinn: Tallinn University of Technology.
3.1.
2008
Pohlak, M.; Majak, J.; Eerme, M. (2008). Optimization of Car Frontal Protection Systems. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (123−128).. Tallinn: Tallinn University of Technology.
3.4.
2008
Majak, J.; Pohlak, M. (2008). Optimal material orientation of linear and non-linear elastic 3D anisotropic materials. Proceedings of Second International Conference on Multidisciplinary Design Optimization and Applications: Second International Conference on Multidisciplinary Design Optimization and Applications, Gijon, Spain, 3-5 September 2008. _EditorsAbbr Zapico Valle, J.L..; Bassir, D.H.; Zhang, W.H.,; González Martínez, M.P.; del Coz Díaz, J.J. Gijon, Spain,.
3.4.
2008
Pohlak, M.; Majak, J.; Karjust, K.; Küttner, R. (2008). Optimization study of composite bathtub. Proceedings of Second International Conference on Multidisciplinary Design Optimization and Applications: Second International Conference on Multidisciplinary Design Optimization and Applications, Gijon, Spain, 3-5 September 2008. Ed. Zapico Valle, J.L..; Bassir, D.H.; Zhang, W.H.,; González Martínez, M.P.; del Coz Díaz, J.J. Gijón, Spain.
3.4.
2008
Majak, J.; Pohlak, M.; Eerme, M.; Küttner, R.; Karjust, K. (2008). Artificial Neural Networks and Genetic Algorithms in Engineering Design. Conference proceedings: International Conference on Engineering Optimization. Ed. Herskovits , J. Rio De Janeiro, Brasil.
5.2.
2008
Majak, J.; Toompalu, S.; Pohlak, M. (2008). Material parameters identification by use of hybrid GA. In: . Achievements in Mechanical and Materials Engineering (AMME), 22-25 june, 2008, Gliwice-Ryn, Poland.
6.3.
2008
Pohlak, M. (2008). Sammvormimine – kas väikeettevõtete edutegur? Inseneeria, 1, 57.
1.2.
2007
Majak, J.; Pohlak, M.; Küttner, R. (2007). An algorithm for localised and diffuse necking analysis. International Journal of Computational Materials Science and Surface Engineering, 1 (4), 494−508.
1.2.
2007
Pohlak, M.; Majak, J.; Eerme, M. (2007). Optimization of car frontal protection system. International Journal for Simulation and Multidisciplinary Design Optimization, 1, 31−37. DOI: 10.1051/ijsmdo:2007004.
1.2.
2007
Küttner, R.; Karjust, K.; Pohlak, M. (2007). The design and production technology of large composite plastic products. Proceedings of the Estonian Academy of Sciences. Engineering, 13 (2), 117−128.
1.2.
2007
Karjust, K.; Küttner, R.; Pohlak, M. (2007). Technology design of composite parts. Journal of Achievements of Materials and Manufacturing Engineering, 22 (2), 23−26.
1.2.
2007
Pohlak, M.; Majak, J.; Küttner, R. (2007). Manufacturability and limitations in incremental sheet forming. Proceedings of the Estonian Academy of Sciences. Engineering, 2, 129−139.
1.2.
2007
Pohlak, M.; Majak, J.; Küttner, R. (2007). Incremental sheet forming process modelling-limitation analysis. Journal of Achievements in Materials and Manufacturing Engineering, 2, 67−70.
1.2.
2007
Majak, J.; Pohlak, M.; Küttner, R. (2007). A simple algorithm for formability analysis. Journal of Achievements in Materials and Manufacturing Engineering, 1, 57−60.
2.3.
2007
Pohlak, M. (2007). Rapid Prototyping of Sheet Metal Components with Incremental Sheet Forming Technology. (Doktoritöö, Tallinna Tehnikaülikool). Tallinn: TTU Press.
3.4.
2007
Pohlak, M.; Majak, J.; Eerme, M. (2007). Optimization study of car frontal protection system. ASMDO: First international Conference on Multidisciplinary Optimization and Applications. 17 - 20 April 2007, Besancon (France). Ed. Bassir; D.H. Besancon, Prantsusmaa: ASMDO.
3.4.
2007
Majak, J.; Küttner, R.; Pohlak, M. (2007). Symbolic-numerical algorithm for material parameters identification. ASMDO: First international conference on multidisciplinary design optimization and applications. 17 - 20 April 2007, Besancon (France). _EditorsAbbr Bassir, D.H; Zapico Valle, J.L.; Zhang, W.H.; Guessasma, S.; Chamoret, D. Besancon, Prantsusmaa: ASMDO publishing,.
5.2.
2007
Majak, J.; Pohlak, M.; Kuttner, R. (2007). A simple algorithm for formability analysis. In: .Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Cracow-Zakopane,Poland. 27-30 may 2007. Acumen.
5.2.
2007
Pohlak, M.; Majak, J.; Küttner, R. (2007). Incremental sheet forming process modelling - limitation analysis. In: .Worldwide Congress on Materials and Manufacturing Engineering and Technology (COMMENT) ,Gliwice-Cracow-Zakopane,Poland. 27-30 may 2007.
3.1.
2006
Pohlak, Meelis; Majak, Jϋri; Kϋttner, Rein (2006). Manufacturability Issues in Incremental Forming. DAAAM Proceedings, 5th International Conference of DAAAM Baltic, Industrial Engineering - Adding innovation Capacity of Labour Force and Entrepreneur: International Conference DAAAM Baltic, Tallinn, April 2006,. _EditorsAbbr Kyttner, Rein. Tallinn: Tallinn Technical University, 157−162.
3.2.
2006
Pohlak, Meelis; Majak, Jüri; Küttner, Rein (2006). Incremental Sheet Forming Process Modelling - Limitation Analysis. Mechanics and Materials in Design 2006, Porto, 24-26 July, 2006. _EditorsAbbr Silva Gomes, J. F.; Meguid, S. A. INEGI-Instituto de Engenharia Mecanica e Gestao Industrial,.
3.2.
2006
Küttner, Rein; Karjust, Kristo; Pohlak, Meelis (2006). Integrated optimal planning of product family and manufacturing technology of its components. Advances in Manufacturing Technology - XX: 4th International Confrenece on manufacturing Research, ICMR2006, Liverpool, UK.2006. Ed. Morgan, M, N; Jenkinson I, D. Liverpool , UK: Liverpool John Moores University , 55−60.
3.4.
2006
Majak, J.; Pohlak, M.; Lepikult, T. (2006). Wavelet Based Discretization Method For Solving Linear and Nonlinear Elasticity Problems. III European Congerence on Computational Mechanics. Lisbon: Springer,.
3.4.
2006
Majak, J.; Eerme, M.; Pohlak, M. (2006). Application of the Haar waveletbased discretization method. In: 5th international conference Aplimat (279−286).. Slovak University of Technology.
5.2.
2006
Majak, J.; Pohlak, M.; Eerme, M. (2006). Application of Wavelet Based Discretization Method to Elasticity and Plasticity Problems. Proceedings of the 6th European Solid Mechanics Conference: 6th European Solid Mechanics Conference, Budapest (Hungary), 28 August - 1 September 2006. Budapest, 2 pp.
5.2.
2006
Majak, J.; Pohlak, M.; Eerme, M. (2006). Wavelet discretization based elasticity solutions to some orthotropic plate and shell problems. XIV International Conference Mechanics of Composite Materials. Riga. 121−121.
1.1.
2005
Pohlak, Meelis; Küttner, Rein; Majak, Jϋri (2005). Modelling and optimal design of sheet metal RP&M processes. Rapid Prototyping Journal, 11 (5), 304−311.
1.2.
2004
Pohlak, Meelis; Küttner, Rein; Majak, Jϋri (2004). Modelling and optimal design of the incremental forming process. Proceedings of the Estonian Academy of Sciences. Engineering, 10 (4), 261−269.
3.1.
2004
Sutt, Annes; Kϋttner, Rein; Pohlak, Meelis; Karjust, Kristo (2004). Development of the experimental Integrated Design Environment for Progressive Cutting Dies. DAAAM Proceedings,4th International Conference Industrial Engineerin- New Challenges to SME: International Conference DAAAM. Ed. Papstel, Jϋri; Katalinic, Branco. Tallinn: Tallinn University of Technology, 161−164.
3.1.
2004
Pohlak, Meelis; Kϋttner, Rein; Majak, Jϋri; Karjust, Kristo; Sutt, Annes (2004). Simulation of Incremental Forming of Sheet Metal Products. DAAAM Proceedings, 4th International Conference Industrial Engineering- New Challenges to SME: DAAAM International Conference, Tallinn, 2004. Ed. Papstel, Jϋri; Katalinic, Branco. Tallinn: Tallinn University of Technology, 149−151.
3.1.
2004
Pohlak, Meelis; Kϋttner, Rein; Majak, Juri; Karjust, Kristo; Sutt, Annes (2004). Experimental Study of Incremental Forming of Sheet Metal Products. DAAAM Proceedings, 4th International Conference Industrial Engineering - New Challlenges to SME: DAAAM International Conference, Tallinn, 2004. Ed. Papstel,Jϋri; Katalinic, Branco. Tallinn: Tallinn University of Technology, 145−148.
3.1.
2004
Karjust, K.; Papstel, J.; Pohlak, M. (2004). Knowledge Based System of the Surface Finishing Processes. 4th International DAAAM Conference proceedings, Tallinn, Estonia. , 131−133.
3.2.
2004
Majak, J.; Küttner, R.; Pohlak, M. (2004). An algorithm for determining forming limits of anisotropic metal sheets. In: Proceedings of the 17-th Nordic Seminar on Computational Mechanics (39−42). . Stockholm: KTH - the Royal Institute of Technology.
3.2.
2004
Majak, J.; Küttner, R.; Pohlak, M. (2004). Forming Limit Diagrams (FLD) for Anisotropic Sheet Metals. Thirteenth international conference: Mechanics of composite materials. , 107.
3.2.
2003
Eerme, M.; Küttner, R.; Pohlak, M.; Portyansky, L. (2003). Design Space for Computer-Aided Design of Metal Structures. In: Katalinic, B. (Ed.). DAAAM International Scientific Book 2003 (205−216).. Vienna, Austria: DAAAM International Vienna.
3.4.
2003
Pohlak, Meelis; Eerme, Martin; Küttner, Rein (2003). Product Development Problems of Statically and Dynamically Loaded Sandwich Structures. OST-2003 Symposium on Machine Design proceedings, Oulu. Oulu: Oulun Yliopisto, 29−37.
3.1.
2002
Mesila, R.; Pohlak, M. (2002). Product development technological environment. DAAAM The 3rd International Conference, Industrial Engineering – new Challenges to SME, Tallinn, 25 – 27 aprill 2002. Tallinn, 112−115.
25.06.2020

Meelis Pohlak

https://etis.ee/CV/Meelis_Pohlak/eng
26.05.1975
6203254
meelis.pohlak@ttu.ee

Career

Institutions and positions
01.01.2017–...   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Senior Researcher (1,00)
01.09.2011–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Mechanical and Industrial Engineering , Chair of Product Development, Senior Researcher (1,00)
01.09.2008–31.08.2011   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Mechanical and Industrial Engineering , Chair of CAD/CAM, Senior Researcher (1,00)
01.01.2008–31.08.2008   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Mechanical and Industrial Engineering , Senior Researcher (1,00)
2002–2007   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Mechanical and Industrial Engineering , Chair of CAD/CAM, Researcher (1,00)
2001–2002   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Mechanical and Industrial Engineering , Other staff (0,50)
 
 
Education
2002–2007   
Tallinn Univeristy of Technology, Doctoral studies
2000–2002   
Tallinn Univeristy of Technology, Master studies
1994–2000   
Tallinn Technical University, Bachelor studies

Qualifications

Academic degrees
Meelis Pohlak, Doctor's Degree, 2007, (sup) Rein Küttner, Rapid Prototyping of Sheet Metal Components with Incremental Sheet Forming Technology, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Mechanical and Industrial Engineering.
Meelis Pohlak, Research Master's Degree, 2002, (sup) Rein Mesila, Prototüüpide kiirvalmistus (Rapid Prototyping), Tallinn University of Technology.
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.13. Mechanical Engineering, Automation Technology and Manufacturing Technology; SPECIFICATION: Rapid Prototyping; Incremental Sheet Forming; Computer Aided Engineering; Optimization of products and processes
 
 

Projects in progress

Completed projects

Dissertations under supervision

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2020
Majak, J.; Shvartsman, B.; Ratas, M.; Bassir, D.; Pohlak, M.; Karjust, K.; Eerme, M. (2020). Higher-order Haar wavelet method for vibration analysis of nanobeams. Materials Today Communications, 25, #101290. DOI: 10.1016/j.mtcomm.2020.101290.
3.1.
2019
Majak, J.; Anton, J.; Õunapuu, E.; Auriemma, F.; Pohlak, M.; Eerme, M.; Klauson, A. (2019). Experimental Evaluation and Numerical Modelling Residual Stresses in Glass Panel. 2018 International Conference on Materials Science and Manufacturing Engineering (MSME 2018) : Paris, France, November 8-10, 2018. Ed. Bassir, D. EDP Sciences, 0223, 1−7. (MATEC Web Conferences; 253). DOI: 10.1051/matecconf/201925302003.
3.1.
2019
Kiitam, I.; Taklaja, P.; Pohlak, M.; Põdra, P.; Palu, I. (2019). Strength Analysis of Medium Voltage Overhead Line Crossarms for Updating Conductor. 2019 Electric Power Quality and Supply Reliability conference (PQ2019) and Symposium of Electrical Engineering and Mechatronics (SEEM2019), Kärdla, 12.-15. juuni 2019. IEEE.
3.1.
2019
Majak, Jüri; Pohlak, Meelis; Eerme, Martin; Shvartsman, Boris (2019). Solving ordinary differential equations with higher order Haar wavelet method. CENTRAL EUROPEAN SYMPOSIUM ON THERMOPHYSICS 2019 (CEST), 2116: International Conference on Numerical Analysis and Applied Mathematics 2018, ICNAAM 2018. Ed. Simos T.E.,Simos T.E.,Simos T.E.,Simos T.E.,Tsitouras C.,Simos. AIP Conference Proceedings: American Institute of Physics Inc. (CENTRAL EUROPEAN SYMPOSIUM ON THERMOPHYSICS 2019 (CEST); Nr330002). DOI: 10.1063/1.5114340.
1.1.
2018
Majak, J.; Pohlak, M.; Karjust, K.; Eerme, M.; Kurnitski, J.; Shvartsman, B. S. (2018). New higher order Haar wavelet method: Application to FGM structures. Composite Structures, 201, 72−78. DOI: 10.1016/j.compstruct.2018.06.013.
3.1.
2018
Kangru, T.; Riives, J.; Otto, T.; Pohlak, M.; Mahmood, K. (2018). Intelligent Decision Making Approach for Performance Evaluation of a robot-based Manufacturing Cell. Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition: IMECE2018, November 9-15, 2018. Pittsburgh, PA, USA: ASME, Paper No. IMECE2018-86666. (Volume 2: Advanced Manufacturing). DOI: 10.1115/IMECE2018-86666.
1.1.
2017
Haavajõe, A.; Mikola, M.; Osali, H.; Pohlak, M.; Herranen, H. (2017). Experimental study of steered fibre composite production. Proceedings of the Estonian Academy of Sciences, 66 (3), 295−299. DOI: 10.3176/proc.2017.3.09.
3.2.
2017
Shevtshenko, E.; Karaulova, T.; Pohlak, M.; Mahmood, K.; Tamm, M.; Leht, K. (2017). Innovative Management and Implementation of Applied Research Project “Green-Cost Efficient Package Selection”. In: B. Llamas Moya, M. D. Storch de Gracia, L, F. Mazadiego, (Ed.). Case Study of Innovative Projects - Successful Real Cases (143−160). InTech - Open Access Publisher . DOI: 10.5772/67541.
5.2.
2017
Majak, J.; Kirs, M.; Eerme, M.; Pohlak, M.; Shvartsman, B. (2017). Optimal Design with Graphene and Nanomaterials. ICCS20 20th International conference on Composite Materials Proceedings, 1: ICCS20 20th International conference on Composite Materials. Ed. A. J. M. Ferreira, W. Larbi, J. F. Deu, F. Tornabene, N. Fantuzzi. Milano: Societa Editrice Esculapio, 300. (Structural and Computational Mechanics).
5.2.
2017
Majak, J.; Pohlak, M.; Eerme, M.; Väer, K.; Õunapuu, E. (2017). Analysis and design of laminated glass composite panel. Mechcomp3 3rd International conference on mechanics of composites Proceedings, 1: 3rd International conference on mechanics of composites. Ed. A. J. M. Ferreira, E. Viola, F. Tornabene, N. Fantuzzi. Bologna: Societa Editrice Esculapio, 15.
3.1.
2016
Mägi, P.; Krumme, A.; Pohlak, M. (2016). Recycling of PA-12 in Additive Manufacturing and the Improvement of its Mechanical Properties. In: Hussainova, I.; Veinthal, R. (Ed.). Engineering Materials and Tribology (9−14). Trans Tech Publications Ltd. (Key Engineering Materials; 674).10.4028/www.scientific.net/KEM.674.9.
3.1.
2016
Haavajõe, A.; Mikola, M.; Pohlak, M. (2016). Design and Manufacturing of Variable Angle Tow Laminate. In: Hussainova, I.; Veinthal, R. (Ed.). Engineering Materials and Tribology (59−64).24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), Tallinn, Estonia, November 5-6, 2015. Trans Tech Publications Ltd. (Key Engineering Materials; 674).10.4028/www.scientific.net/KEM.674.59.
3.1.
2016
Majak, J.; Shvartsman, B.; Pohlak, M.; Karjust, K.; Eerme, M.; Tungel, E. (2016). Solution of fractional order differential equation by the Haar Wavelet method. Numerical convergence analysis for most commonly used approach. AIP Conference Proceedings, 1738: INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2015, Rhodos, 22–28 September 2015. Ed. T. Simos. USA: AIP Publishing, 1−4. ( 480110). DOI: 10.1063/1.4952346.
3.1.
2016
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Pohlak, M.; Veinthal, R. (2016). Effect of Hot Isostatic Pressing on Cellular Lattice Structures Obtained by Selective Laser Melting. World PM2016 proceedings: World PM2016 Congress & Exhibition, Hamburg, Germany, 9-13 October 2016. European Powder Metallurgy Association, USB.
3.2.
2016
Shevtshenko, E.; Karaulova, T.; Pohlak, M.; Mahmood, K. (2016). Elaboration of framework for green and cost efficient package development for electronic industry. International Conference on Innovative Technologies, IN-TECH 2016. University of Rijeka, 235−238.
5.2.
2016
Majak, J.; Pohlak, M.; Õunapuu, E.; Auriemma, F.; Rämmal, H.; Saarts, S. (2016). ANALYSIS AND DESIGN OF MULTIFUNCTIONAL LAMINATED GLASS COMPOSITE STRUCTURES. ICCE proceedings: 24th Annual International Conference on Composites and Nano Engineering.. Ed. D. Hui. University of New Orleans Press.
5.2.
2016
Majak, J.; Pohlak, M.; Shvartsman, B.; Õunapuu, E.; Kirs M. (2016). Design of multifunctional laminated glass composite panel. ICCS19 19TH INTERNATIONAL CONFERENCE ON COMPOSITE STRUCTURES: Proceedings. Ed. A. J. M. Ferreira. Società Editrice Esculapio, 140.
5.2.
2016
Majak, J.; Pohlak, M.; Shvartsman, B.; Õunapuu, E.; Kirs M. (2016). Plate model for multifunctional laminated glass composite panel. ICCS19 19TH INTERNATIONAL CONFERENCE ON COMPOSITE STRUCTURES: Proceedings. Ed. A. J. M. Ferreira. Società Editrice Esculapio, 140.
5.2.
2016
Majak, J.; Shvartsman, B.; Pohlak, M.; Eerme, M.; Kirs, M. (2016). On accuracy of the haar wavelet method. Mathematical modelling and analysis 2016 : abstracts. Ed. A. Pedas. Eesti Matemaatika Selts, 50.
1.1.
2015
Majak, J.; Shvartsman, B.; Karjust, K.; Mikola, M.; Haavajõe, A.; Pohlak, M. (2015). On the accuracy of the Haar wavelet discretization method. Composites Part B Engineering, 80, 321−327. DOI: 10.1016/j.compositesb.2015.06.008.
1.1.
2015
Majak, J.; Shvartsman, B.; Kirs, M.; Pohlak, M.; Herranen, H. (2015). Convergence theorem for the Haar wavelet based discretization method. Composite Structures, 126, 227−232.10.1016/j.compstruct.2015.02.050.
3.1.
2015
Haavajõe, A.; Mikola, M.; Herranen, H.; Pohlak, M. (2015). MANUFACTURING OF STEERED FIBER COMPOSITE LAMINATE. In: Proceedings of the 10th International Conference of DAAAM Baltic Industrial Engineering 12-13th May 2015, Tallinn, Estonia (21−26). Tallinn University of Technology.
3.2.
2015
Mikola, M.; Haavajõe, A.; Arak, M.; Majak, J.; Pohlak, M.; Shvartsman, B. (2015). ACCURACY ISSUES OF THE HAAR WAVELET METHOD. In: Berezovksi, A.; Tamm, K.; Peets, T. (Ed.). Proceedings of the NSCM28: 28th Nordic Seminar on Computational Mechanics 22 – 23 October, Tallinn, Estonia, 2015 (103−106).. Tallinn: Institute of Cybernetics at Tallinn University of Technology.
6.3.
2015
Pohlak, M. (2015). Sammvormimine – paindlik lehtmetalli vormimistehnoloogia. (2−3)..
6.3.
2015
Pohlak, M.; Veinthal, R. (2015). Metallobjektide 3D printimine – uued võimalused ja väljakutsed. (2−3). .
6.3.
2015
Jõeleht, M.; Kollo, L.; Pohlak, M.; Veinthal, R. (2015). Uued võimalused 3D-printimise valdkonnas- metallide printimine peagi võimalik ka Eestis. (32−35). .
3.4.
2013
Herranen, H.; Saar, T.; Gordon, R.; Pohlak, M.; Lend, H. (2013). Durability Performance Of Semiconductor Strain Gauges In GFRP Laminate. Proceedings of 6th ECCOMAS Conference on Smart Structures and Materials SMART2013: 6th ECCOMAS Conference on Smart Structures and Materials SMART2013. Torino,.
5.2.
2013
Pohlak, M.; Majak, J.; Karjust, K.; Herranen, H.; Lend, H. (2013). Design of functionally graded sandwich panels. Book of Abstracts: 17-th Internation Conference on Composite Materials. Ed. A.J.M.Ferreira. Faculty of Engineering.
1.1.
2012
Majak, J.; Pohlak, M.; Eerme, M.; Velsker, T. (2012). Design of car frontal protection system using neural networks and genetic algorithm. Mechanika, 18 (4), 453−460.
3.1.
2012
Karjust, K.; Pohlak, M; Majak, J. (2012). Adhesion process optimization in reinforced composites. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 2: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Tallinn: Tallinn University of Technology, 633−638.
3.2.
2012
Herranen, H.; Kers, J.; Preden, J.; Talalaev, R.; Eerme, M.; Majak, J.; Pohlak, M.; Allikas, G.; Pabut, O.; Lend, H. (2012). The influence of embedded electronics on the structural performance in carbon fiber laminates. Proceedings of Mechanics of Nano, Micro and Macro Composite Structures 2012: Mechanics of Nano, Micro and Macro Composite Structures, tORINO, 18-20 June 2012. Ed. A. Ferreira, E. Carrera. Torino, Italy,.
3.4.
2012
Allikas, G.; Kers, J.; Aruniit, A.; Herranen, H.; Eerme, M.; Majak, J.; Pohlak, M.; Pabut, O. (2012). Design of light-weight sandwich panels for trailers. Proceedings of the fifteenth European Conference on Composite Materials: Fifteenth European Conference on Composite Materials, Italy, June 24-28, 2012. Venice, Italy,.
5.2.
2012
Majak, J.; Pohlak, M.; Eerme, M.; Kers, J. (2012). Nanoscale vibration analysis of graphene sheets using nonlocal elasticity theory. Proceedings of the International conference on Mechanics of nano, micro and macro composite structures: Mechanics of nano, micro and macro composite structures, Torino, 18-20 juuni 2012. Ed. A. J. M. Ferreira, E. Carrera. Torino: Politecnico di Torino,.
1.1.
2011
Herranen, H.; Pabut, O.; Eerme, M.; Majak, J.; Pohlak, M.; Kers, J.; Saarna, M.; Allikas, G.; Aruniit, A. (2011). Design and Testing of Sandwich Structures with Different Core Materials. Journal of Materials Science of Kaunas University of Technology, 17 (4), 1−6.
3.4.
2011
Majak, J.; Kers, J.; Pohlak, M.; Eerme, M.; Luiga, K. (2011). Wavelet based discretization technique for analysis and design of composite structures. The 18th International Conference on Composite Materials. Composite materials: key to the future: The 18th International Conference on Composite Materials. Ed. Woo Il Lee. Jeju, Lõuna-Korea: The Korean Society of Composite Materials, 1−6.
3.4.
2011
Pohlak, M.; Majak, J.; Pääsuke, K.; Eerme, M.; Kõiv, R. (2011). Multi-objective topology optimization of weight critical structures. 16th International Conference on Composite Structures (ICCS16), Porto, 28-30 June 2011.. Ed. Antonio J. M. Ferreira.
5.2.
2011
Kers, J.; Saarna, M.; Peetsalu, P.; Aruniit, A.; Majak, J.; Pohlak, M.; Herranen, H. (2011). Selection of parameters in adhesive bonding of composite structures. 20th International Baltic Conference, Materials Engineering 2011, Book of Abstracts: 20th International Baltic Conference, Materials Engineering, Kaunas, Lihtuania, October 27-28. Kaunas, Lithuania: Kaunas University of Technology Press, 53−53.
6.2.
2011
Karjust, K.; Kers, J.; Kiolein, I.; Kokla, M.; Küttner, R.; Lavin, J.; Lavrentjev, J.; Lumiste, R.; Lõun, K.; Mõtus, L.; Naams, I.; Otto, T.; Pohlak, M.; Raba, K.; Riives, J.; Reedik, V.; Roosimölder, L.; Saks, A.; Talkop, A.; Tähemaa, T. ... Veinthal, R. (2011). Uuenduslik tootmine : käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2010
Karjust, K.; Pohlak, M.; Majak, J. (2010). Technology Route Planning of Large Composite Parts. International Journal of Material Forming, 3, 631−634. DOI: 10.1007/s12289-010-0849-2.
1.1.
2010
Majak, J.; Pohlak, M. (2010). Decomposition method for solving optimal material orientation problems. Composite Structures, 92 (8), 1839−1845.10.1016/j.compstruct.2010.01.015.
1.1.
2010
Pohlak, M.; Majak, J.; Karjust, K.; Küttner, R. (2010). Multicriteria optimization of large composite parts. Composite Structures, 92 (9), 2146−2152. DOI: 10.1016/j.compstruct.2009.09.039.
1.1.
2010
Majak, J.; Pohlak, M. (2010). Optimal material orientation of linear and non-linear elastic 3D anisotropic materials. Meccanica, 45 (5), 671−680.10.1007/s11012-009-9262-7.
1.1.
2010
Karjust, K.; Pohlak, M.; Majak, J. (2010). Optimal adhesion measuring methods of the glass fiber reinforcement layer. Estonian Journal of Engineering, 16 (4), 297−306.
3.1.
2010
Velsker, T.; Majak, J.; Eerme, M.; Pohlak, M. (2010). Double-curved surface forming process modeling. Kyttner, R.. Proceedings of the 7th International Conference of DAAAM Baltic Industrial engineering : 22-24th April 2010, Tallinn, Estonia (257−262).. Tallinn University of Technology.
3.1.
2010
Pabut, O.; Eerme, M.; Majak, J.; Pohlak, M. (2010). Design Optimization of Structural Components for Fatigue Loading. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn Technical University Press, 131−135.
3.1.
2010
Karjust, K.; Pohlak, M.; Majak, J. (2010). Optimal adhesion measuring methods of the glass-fiber reinforcement layer. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn University of Technology Press, 232−237.
3.1.
2010
Tähemaa, T.; Karjust, K.; Pohlak, M. (2010). ERP and PLM resources in Estonian SME’s. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn University of Technology Press, 386−391.
3.1.
2010
Majak, J.; Pohlak, M.; Küttner, R.; Eerme, M.; Karjust, K.; Kers, J. (2010). A Symbolic-Numerical Algorithm for Material Parameter Identification. Proceedings of the Tenth International Conference on Computational Structures Technology: Tenth International Conference on Computational Structures Technology, Valencia - Spain, 14-17 September 2010. Ed. B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru and M.L. Romero. Civil-Comp Press, 1−14. DOI: 10.4203/ccp.93.133.
3.2.
2010
Majak, J.; Pohlak, M.; Eerme, M.; Karjust, K.; Kers, J. (2010). Haar wavelet based discretization technique for analysis and design of composite plate and shell structures. In: Kollar, L.; Cigany, T.; Karger Kocsis, J. (Ed.). 14th European Conference on Composite Materials (1−10). . Budapest University of Technology.
3.4.
2010
Karjust, K.; Pohlak, M.; Majak, J. (2010). Optimal adhesion area of the glass-fiber reinforcement layer. 14th European Conference on Composite Materials. Ed. Kollar, L.; Cigany, T.; Karger Kocsis, J. Budapest University of Technology.
1.1.
2009
Majak, J.; Pohlak, M.; Eerme, M. (2009). Application of the Haar Wavelet based discretization technique to orthotropic plate and shell problems. Mechanics of Composite Materials, 45 (6), 631−642. DOI: 10.1007/s11029-010-9119-0.
1.1.
2009
Majak, J.; Pohlak, M.; Eerme, M.; Lepikult, T. (2009). Weak formulation based haar wavelet method for solving differential equations. Applied Mathematics and Computation, 211 (2), 488−494. DOI: 10.1016/j.amc.2009.01.089.
1.2.
2009
Pohlak, M.; Majak, J.; Eerme, M. (2009). Engineering optimization of a car frontal protection system component. Estonian Journal of Engineering, 15 (1), 61−72.
3.4.
2009
Majak, J.; Pohlak, M. (2009). Stationary of the strain energy density in anisotropic solids. 8th World Congress on Structural and Multidisciplinary Optimization. Portugal, Lisbon,.
5.2.
2009
Pohlak, M.; Majak, J.; Küttner, R.; Karjust, K. (2009). Multicriteria optimization of large composite parts. 15th International Conference on Composite Structures. Ed. A. J. M. Ferreira. Potugal, Porto: FEUP.
5.2.
2009
Majak, J.; Pohlak, M. (2009). Decomposition method for solving optimal material orientation problems. 15-th International Conference on Composite Structrures. _EditorsAbbr A. J. M. Ferreira. Portugal, Porto: FEUP,.
5.2.
2009
Majak, J.; Pohlak, M.; Küttner, R. (2009). Modeling Constitutive Relation For Woven Polymer-Based Composites. NATO advanced research workshop on “Textile Composites” (ARV conference). _EditorsAbbr David Hui. Kiiev, Ukraina,.
6.3.
2009
Pohlak, M. (2009). Laserpaagutus: virtuaalmudelist saab toode. Inseneeria, 5, 30−32.
1.2.
2008
Majak, J.; Toompalu, S; Pohlak, M. (2008). Material parameters identification by use of hybrid GA. Journal of Achievements of Materials and Manufacturing Engineering, 27, 63−66.
3.1.
2008
Majak, J.; Küttner, R.; Pohlak, M.; Eerme, M.; Karjust, K. (2008). Application of evolutionary methods for solving optimization problems in engineering. Proceedings of NordDesign 2008: NordDesign 2008, Tallinn, August 21-23, 2008. Ed. Roosimölder, L. Tallinn: TTU Press, 39−48.
3.1.
2008
Karjust, K.; Küttner, R.; Pohlak, M. (2008). The production technology considerations of large composite parts. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (251−256). . Tallinn: Tallinn University of Technology.
3.1.
2008
Pohlak, M.; Majak, J.; Eerme, M. (2008). Optimization of Car Frontal Protection Systems. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (123−128).. Tallinn: Tallinn University of Technology.
3.4.
2008
Majak, J.; Pohlak, M. (2008). Optimal material orientation of linear and non-linear elastic 3D anisotropic materials. Proceedings of Second International Conference on Multidisciplinary Design Optimization and Applications: Second International Conference on Multidisciplinary Design Optimization and Applications, Gijon, Spain, 3-5 September 2008. _EditorsAbbr Zapico Valle, J.L..; Bassir, D.H.; Zhang, W.H.,; González Martínez, M.P.; del Coz Díaz, J.J. Gijon, Spain,.
3.4.
2008
Pohlak, M.; Majak, J.; Karjust, K.; Küttner, R. (2008). Optimization study of composite bathtub. Proceedings of Second International Conference on Multidisciplinary Design Optimization and Applications: Second International Conference on Multidisciplinary Design Optimization and Applications, Gijon, Spain, 3-5 September 2008. Ed. Zapico Valle, J.L..; Bassir, D.H.; Zhang, W.H.,; González Martínez, M.P.; del Coz Díaz, J.J. Gijón, Spain.
3.4.
2008
Majak, J.; Pohlak, M.; Eerme, M.; Küttner, R.; Karjust, K. (2008). Artificial Neural Networks and Genetic Algorithms in Engineering Design. Conference proceedings: International Conference on Engineering Optimization. Ed. Herskovits , J. Rio De Janeiro, Brasil.
5.2.
2008
Majak, J.; Toompalu, S.; Pohlak, M. (2008). Material parameters identification by use of hybrid GA. In: . Achievements in Mechanical and Materials Engineering (AMME), 22-25 june, 2008, Gliwice-Ryn, Poland.
6.3.
2008
Pohlak, M. (2008). Sammvormimine – kas väikeettevõtete edutegur? Inseneeria, 1, 57.
1.2.
2007
Majak, J.; Pohlak, M.; Küttner, R. (2007). An algorithm for localised and diffuse necking analysis. International Journal of Computational Materials Science and Surface Engineering, 1 (4), 494−508.
1.2.
2007
Pohlak, M.; Majak, J.; Eerme, M. (2007). Optimization of car frontal protection system. International Journal for Simulation and Multidisciplinary Design Optimization, 1, 31−37. DOI: 10.1051/ijsmdo:2007004.
1.2.
2007
Küttner, R.; Karjust, K.; Pohlak, M. (2007). The design and production technology of large composite plastic products. Proceedings of the Estonian Academy of Sciences. Engineering, 13 (2), 117−128.
1.2.
2007
Karjust, K.; Küttner, R.; Pohlak, M. (2007). Technology design of composite parts. Journal of Achievements of Materials and Manufacturing Engineering, 22 (2), 23−26.
1.2.
2007
Pohlak, M.; Majak, J.; Küttner, R. (2007). Manufacturability and limitations in incremental sheet forming. Proceedings of the Estonian Academy of Sciences. Engineering, 2, 129−139.
1.2.
2007
Pohlak, M.; Majak, J.; Küttner, R. (2007). Incremental sheet forming process modelling-limitation analysis. Journal of Achievements in Materials and Manufacturing Engineering, 2, 67−70.
1.2.
2007
Majak, J.; Pohlak, M.; Küttner, R. (2007). A simple algorithm for formability analysis. Journal of Achievements in Materials and Manufacturing Engineering, 1, 57−60.
2.3.
2007
Pohlak, M. (2007). Rapid Prototyping of Sheet Metal Components with Incremental Sheet Forming Technology. (Doktoritöö, Tallinna Tehnikaülikool). Tallinn: TTU Press.
3.4.
2007
Pohlak, M.; Majak, J.; Eerme, M. (2007). Optimization study of car frontal protection system. ASMDO: First international Conference on Multidisciplinary Optimization and Applications. 17 - 20 April 2007, Besancon (France). Ed. Bassir; D.H. Besancon, Prantsusmaa: ASMDO.
3.4.
2007
Majak, J.; Küttner, R.; Pohlak, M. (2007). Symbolic-numerical algorithm for material parameters identification. ASMDO: First international conference on multidisciplinary design optimization and applications. 17 - 20 April 2007, Besancon (France). _EditorsAbbr Bassir, D.H; Zapico Valle, J.L.; Zhang, W.H.; Guessasma, S.; Chamoret, D. Besancon, Prantsusmaa: ASMDO publishing,.
5.2.
2007
Majak, J.; Pohlak, M.; Kuttner, R. (2007). A simple algorithm for formability analysis. In: .Worldwide Congress on Materials and Manufacturing Engineering and Technology, Gliwice-Cracow-Zakopane,Poland. 27-30 may 2007. Acumen.
5.2.
2007
Pohlak, M.; Majak, J.; Küttner, R. (2007). Incremental sheet forming process modelling - limitation analysis. In: .Worldwide Congress on Materials and Manufacturing Engineering and Technology (COMMENT) ,Gliwice-Cracow-Zakopane,Poland. 27-30 may 2007.
3.1.
2006
Pohlak, Meelis; Majak, Jϋri; Kϋttner, Rein (2006). Manufacturability Issues in Incremental Forming. DAAAM Proceedings, 5th International Conference of DAAAM Baltic, Industrial Engineering - Adding innovation Capacity of Labour Force and Entrepreneur: International Conference DAAAM Baltic, Tallinn, April 2006,. _EditorsAbbr Kyttner, Rein. Tallinn: Tallinn Technical University, 157−162.
3.2.
2006
Pohlak, Meelis; Majak, Jüri; Küttner, Rein (2006). Incremental Sheet Forming Process Modelling - Limitation Analysis. Mechanics and Materials in Design 2006, Porto, 24-26 July, 2006. _EditorsAbbr Silva Gomes, J. F.; Meguid, S. A. INEGI-Instituto de Engenharia Mecanica e Gestao Industrial,.
3.2.
2006
Küttner, Rein; Karjust, Kristo; Pohlak, Meelis (2006). Integrated optimal planning of product family and manufacturing technology of its components. Advances in Manufacturing Technology - XX: 4th International Confrenece on manufacturing Research, ICMR2006, Liverpool, UK.2006. Ed. Morgan, M, N; Jenkinson I, D. Liverpool , UK: Liverpool John Moores University , 55−60.
3.4.
2006
Majak, J.; Pohlak, M.; Lepikult, T. (2006). Wavelet Based Discretization Method For Solving Linear and Nonlinear Elasticity Problems. III European Congerence on Computational Mechanics. Lisbon: Springer,.
3.4.
2006
Majak, J.; Eerme, M.; Pohlak, M. (2006). Application of the Haar waveletbased discretization method. In: 5th international conference Aplimat (279−286).. Slovak University of Technology.
5.2.
2006
Majak, J.; Pohlak, M.; Eerme, M. (2006). Application of Wavelet Based Discretization Method to Elasticity and Plasticity Problems. Proceedings of the 6th European Solid Mechanics Conference: 6th European Solid Mechanics Conference, Budapest (Hungary), 28 August - 1 September 2006. Budapest, 2 pp.
5.2.
2006
Majak, J.; Pohlak, M.; Eerme, M. (2006). Wavelet discretization based elasticity solutions to some orthotropic plate and shell problems. XIV International Conference Mechanics of Composite Materials. Riga. 121−121.
1.1.
2005
Pohlak, Meelis; Küttner, Rein; Majak, Jϋri (2005). Modelling and optimal design of sheet metal RP&M processes. Rapid Prototyping Journal, 11 (5), 304−311.
1.2.
2004
Pohlak, Meelis; Küttner, Rein; Majak, Jϋri (2004). Modelling and optimal design of the incremental forming process. Proceedings of the Estonian Academy of Sciences. Engineering, 10 (4), 261−269.
3.1.
2004
Sutt, Annes; Kϋttner, Rein; Pohlak, Meelis; Karjust, Kristo (2004). Development of the experimental Integrated Design Environment for Progressive Cutting Dies. DAAAM Proceedings,4th International Conference Industrial Engineerin- New Challenges to SME: International Conference DAAAM. Ed. Papstel, Jϋri; Katalinic, Branco. Tallinn: Tallinn University of Technology, 161−164.
3.1.
2004
Pohlak, Meelis; Kϋttner, Rein; Majak, Jϋri; Karjust, Kristo; Sutt, Annes (2004). Simulation of Incremental Forming of Sheet Metal Products. DAAAM Proceedings, 4th International Conference Industrial Engineering- New Challenges to SME: DAAAM International Conference, Tallinn, 2004. Ed. Papstel, Jϋri; Katalinic, Branco. Tallinn: Tallinn University of Technology, 149−151.
3.1.
2004
Pohlak, Meelis; Kϋttner, Rein; Majak, Juri; Karjust, Kristo; Sutt, Annes (2004). Experimental Study of Incremental Forming of Sheet Metal Products. DAAAM Proceedings, 4th International Conference Industrial Engineering - New Challlenges to SME: DAAAM International Conference, Tallinn, 2004. Ed. Papstel,Jϋri; Katalinic, Branco. Tallinn: Tallinn University of Technology, 145−148.
3.1.
2004
Karjust, K.; Papstel, J.; Pohlak, M. (2004). Knowledge Based System of the Surface Finishing Processes. 4th International DAAAM Conference proceedings, Tallinn, Estonia. , 131−133.
3.2.
2004
Majak, J.; Küttner, R.; Pohlak, M. (2004). An algorithm for determining forming limits of anisotropic metal sheets. In: Proceedings of the 17-th Nordic Seminar on Computational Mechanics (39−42). . Stockholm: KTH - the Royal Institute of Technology.
3.2.
2004
Majak, J.; Küttner, R.; Pohlak, M. (2004). Forming Limit Diagrams (FLD) for Anisotropic Sheet Metals. Thirteenth international conference: Mechanics of composite materials. , 107.
3.2.
2003
Eerme, M.; Küttner, R.; Pohlak, M.; Portyansky, L. (2003). Design Space for Computer-Aided Design of Metal Structures. In: Katalinic, B. (Ed.). DAAAM International Scientific Book 2003 (205−216).. Vienna, Austria: DAAAM International Vienna.
3.4.
2003
Pohlak, Meelis; Eerme, Martin; Küttner, Rein (2003). Product Development Problems of Statically and Dynamically Loaded Sandwich Structures. OST-2003 Symposium on Machine Design proceedings, Oulu. Oulu: Oulun Yliopisto, 29−37.
3.1.
2002
Mesila, R.; Pohlak, M. (2002). Product development technological environment. DAAAM The 3rd International Conference, Industrial Engineering – new Challenges to SME, Tallinn, 25 – 27 aprill 2002. Tallinn, 112−115.
25.06.2020

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 28 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
1.2.2.1.VERT200113D printimise õppekavamaterjalide arendus kutseharidusele17.12.201916.12.2021Tauno OttoTallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 33 645,00 EUR
ETFETF6835Anisotroopsete konstruktsioonide analüüs ja optimiseerimine01.01.200631.12.2009Jüri MajakTallinna Tehnikaülikool, Mehaanikateaduskond42 215,42 EUR
ETFETF9441Digitaalsete otsetootmisprotsesside analüüs ja arendus01.01.201231.12.2015Meelis PohlakTallinna Tehnikaülikool, Mehaanikateaduskond62 400,00 EUR
MUUVFP629EmerEEG - Kaasaskantav seade, mida kasutatakse reanimobiilides traumaatiliste ajukahjustuste varajaseks avastamiseks ja raviks, vältimaks hilisemaid tõsiseid terviseprobleeme.01.10.201330.10.2015Kristo KarjustTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootmistehnika õppetool151 328,00 EUR
MUULep10023Goliath OÜ tuulegeneraator01.02.201016.04.2010Martin EermeTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Raalintegreeritud tootmise ja projekteerimise õppetool23 263,84 EUR
MUUVIR478Innovatiivsete regiooniüleste konkurentsivõimet tagavate ärimudelite arendus (INNOREG)01.06.201031.05.2013Tauno OttoTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootmistehnika õppetool164 608,99 EUR
ETFETF5883Kiirvalmistamise protsesside, toodete ja materjalide modelleerimine01.01.200431.12.2006Rein KüttnerTallinna Tehnikaülikool, Mehaanikateaduskond26 382,72 EUR
MUUB44Komposiit- ja funktsionaalsetest materjalidest konstruktsioonide, toodete ja tootmisprotsesside optimaalne projekteerimine01.01.201531.12.2015Jüri MajakTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootmistehnika õppetool40 000,00 EUR
SFSF0140035s12Komposiit- ja funktsionaalsetest materjalidest konstruktsioonide, toodete ja tootmisprotsesside optimaalne projekteerimine01.01.201231.12.2014Jüri MajakTallinna Tehnikaülikool, Mehaanikateaduskond206 400,00 EUR
MUUT421 (0141421s00)Konkurentsivõimelise tootearenduse ja tootmise tugisüsteemid01.01.200031.12.2004Rein KüttnerTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootmistehnika õppetool235 514,42 EUR
MUU861FKvaliteettoorikute tehnoloogia väljaarendamine01.01.199931.12.2002Rein MesilaTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootmistehnika õppetool6 563,73 EUR
MUUAR15009Kõrgkooliõpiku "Nüüdistootmine" koostamine11.05.201530.06.2017Tauno OttoTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut12 800,00 EUR
MUUAR12134Kõrgtehnoloogiliste õhukeste pinnete rakendamine tööriistade kulumiskindluse tõstmisel.01.09.201230.06.2015Priidu PeetsaluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut855 012,84 EUR
ETFETF8485Materjalide ja konstruktsioonide optimeerimine arvestades elastset ja/või plastset anisotroopiat01.01.201031.12.2013Jüri MajakTallinna Tehnikaülikool, Mehaanikateaduskond33 998,41 EUR
MUUBF91Mehaaniliste katsetussüsteemide rekonstrueerimine01.05.200801.02.2009Priidu PeetsaluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool8 308,51 EUR
PUT; PUT_OPPUT1300Numbrilised meetodid ja algoritmid kaasaegsete komposiit- ja nanostruktuuride projekteerimiseks01.01.201631.12.2019Jüri MajakTallinna Tehnikaülikool, Mehaanikateaduskond; Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 240 000,00 EUR
MUUAR16077Nutika tootmise tuumiktaristu 01.01.201730.06.2019Tauno OttoTallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootmistehnika õppetool1 595 172,55 EUR
MUUG5620 (ETF5620)Omavahel seotud toodete ja tootmise arendusprojektide kogumi optimeerimise metoodika ja realisatsioon ettevõtete koostöövõrgule01.01.200331.12.2005Rein KüttnerTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Raalintegreeritud tootmise ja projekteerimise õppetool65 336,88 EUR
MUULep16059Roheline kulu efektiivne pakend Ericsson tootele25.03.201617.06.2016Eduard ŠevtšenkoTallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut20 000,00 EUR
MUUAR12139Targad komposiitmaterjalid: projekteerimine ja valmistamine01.07.201230.06.2015Jüri MajakTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootmistehnika õppetool535 253,40 EUR
MUUF15027Tarkade tootmis- ja materjalitehnoloogiate arenduskeskus01.09.201531.08.2019Kristo KarjustTallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut1 137 585,00 EUR
TKTAR16012Teadmistepõhise ehituse tippkeskus01.10.201501.03.2023Jarek KurnitskiTallinna Tehnikaülikool, Ehitusteaduskond, Ehitiste projekteerimise instituut, Ehitusfüüsika ja energiatõhususe õppetool4 143 275,00 EUR
SFSF0142684s05Toodete ja tootmisprotsesside kiire teostamine - teooria ja metodoloogia.01.01.200531.12.2010Rein KüttnerTallinna Tehnikaülikool, Mehaanikateaduskond792 131,19 EUR
MUU802LTootearenduse ja valuvormide tootmise tehnoloogilise ettevalmistuse efektiivsuse tõstmine01.04.199831.12.2002Rein MesilaTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Tootmistehnika õppetool5 074,58 EUR
MUUG5600 (ETF5600)Tooteperede projekteerimine01.01.200331.12.2005Martin EermeTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Raalintegreeritud tootmise ja projekteerimise õppetool15 083,15 EUR