See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Riho Tarbe

https://etis.ee/CV/Riho_Tarbe/est

Kvalifikatsioon

Teaduskraadid
Riho Tarbe, doktorikraad, 2009, (juh) Priit Kulu; Helmo Käerdi, Abrasive Impact Wear: Tester, Wear and Grindability Studies (Abrasiivlöökkulumine: seade, kulumise ja jahvatamise uuringud), Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut.
 
 

Lõppenud projektid

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2017
Kulu, P.; Surženkov, A.; Tarbe, R.; Goljandin, D.; Tarraste, M.; Viljus, M.; Traksmaa, R.; Simson, T. (2017). Wear Resistance of Sintered Composite Hardfacings under Different Abrasive Wear Conditions. Materials Science, 23 (3), 249−253. DOI: 10.5755/j01.ms.23.3.17640.
3.1.
2017
Simson, T.; Kulu, P.; Surženkov, A.; Goljandin, D.; Tarbe, R.; Tarraste, M.; Viljus, M. (2017). Optimization of Structure of Hardmetal Reinforced Iron-Based PM Hardfacings for Abrasive Wear Conditions. In: D. Loca (Ed.). Engineering Materials and Tribology XXV (351−355). Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.351.
3.1.
2017
Surzhenkov, A.; Viljus, M.; Simson, T.; Tarbe, R.; Saarna, M.; Casesnoves, F. (2017). Wear resistance and mechanisms of composite hardfacings at abrasive impact erosion wear. In: 6th International Conference on Fracture Fatigue and Wear 26–27 July 2017, Porto, Portugal (1−10). 6 th International Conference on Fracture Fracture and Wear FFW 2017 Porto, Portugal, 26‐27 July 2017. IOP Publishing Ltd. (Journal of Physics: Conference Series; 843). DOI: 10.1088/1742-6596/843/1/012060.
3.1.
2017
Kulu, P.; Casesnoves, F.; Simson, T.; Tarbe, R. (2017). Prediction of Abrasive Erosion Impact Wear of Composite Hardfacings. In: R. Bendikienė and K. Juzėnas (Ed.). Materials Engineering 2017 (201−206). Trans Tech Publications Ltd. (Solid State Phenomena; 267).10.4028/www.scientific.net/SSP.267.201.
1.1.
2016
Simson, T.; Kulu, P.; Surženkov, A.; Tarbe, R.; Viljus, M.; Tarraste, M.; Goljandin, D. (2016). Optimization of reinforcement content of PM hardfacing in abrasive wear conditions. Proceedings of the Estonian Academy of Sciences, 65 (2), 90−96. DOI: 10.3176/proc.2016.2.03.
3.4.
2016
Surzhenkov, A.; Tarbe, R.; Tarraste, M.; Simson, T.; Viljus, M.; Kulu, P. (2016). Optimization of hardmetal reinforcement content in Fe-based hardfacings for abrasive-impact wear conditions. In: Proceedings of the 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications (xx−xx). Asociace pro tepelné zpracování kovů.
1.1.
2015
Kulu, P.; Tarbe, R.; Saarna, M.; Surzenkov, A.; Peetsalu, P.; Talviste, K. (2015). Wear resistance and selection of steels, hardmetals and hardfacings for abrasive wear conditions. International Journal of Microstructure and Materials Properties, 10 (2), 101−113. DOI: 10.1504/IJMMP.2015.068718.
3.2.
2015
Kulu, P.; Surženkov, A.; Tarbe, R.; Simson, T. (2015). Abrasive impact wear resistance of hardfacings. Proceedings - European Conference on Heat Treatment and 22st IFHTSE Congress: European Conference on Heat Treatment and 22st IFHTSE Congress, Venice, Italy, 20-22 May 2015. Itaalia: Associazione Italiana di Metallurgia, 1−9.
1.1.
2014
Kulu, P.; Käerdi, H.; Surzenkov, A.; Tarbe, R.; Veinthal, R.; Goljandin, D.; Zikin, A. (2014). Recycled hardmetal-based powder composite coatings: optimisation of composition, structure and properties. International Journal of Materials and Product Technology, 49, 180−202. DOI: 10.1504/IJMPT.2014.064038.
3.1.
2014
Tarbe, R.; Kulu, P.; Zikin, A.; Surzhenkov, A. (2014). Abrasive Wear Resistance of HVOF Sprayed and PTA-welded Hardmetal Hard Phase Reinforced Metal-Matrix Based Coatings. In: D. Loca (Ed.). Engineering Materials & Tribology XXII (3−7). . Trans Tech Publications Ltd. (Key Engineering Materials; 604).
3.2.
2014
Kulu, P.; Surzhenkov, A.; Tarbe, R.; Viljus, M.; Saarna, M.; Tarraste, M. (2014). Hardfacings for Extreme Abrasive Wear Applications. Proceedings of the 28th International Conference on Surface Modification Technologies: 28th International Conference on Surface Modification Technologies, Tampere, Finland, June 16th–18th, 2014. Valardocs, 149−157.
3.2.
2014
Kulu, P.; Surzhenkov, A.; Tarbe, R.; Saarna, M.; Tarraste, M.; Viljus, M. (2014). Hardfacings for Extreme Wear Applications. In: T. S. Sudarshan, P. Vuoristo, H. Koivuluoto (Ed.). Proceedings of the XXVIII International Conference on Surface Modification Technologies (149−157). Valardocs.
1.1.
2013
Veinthal, R.; Sergejev, F.; Zikin, A.; Tarbe, R.; Hornung, J. (2013). Abrasive impact wear and surface fatigue wear behaviour of Fe-Cr-C PTA overlays. Wear, 301, 102−108. DOI: 10.1016/j.wear.2013.01.077.
3.1.
2013
Kulu, P.; Tarbe, R.; Žikin, A.; Sarjas, H.; Surženkov, A. (2013). Abrasive Wear Resistance of Recycled Hardmetal Reinforced Thick coating. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (185−190). Trans Tech Publications Ltd. (Key Engineering Materials; 527). DOI: 10.4028/www.scientific.net/KEM.527.185.
3.2.
2013
Kulu, P.; Žikin, A.; Surženkov, A.; Tarbe, R. (2013). Structure and properties of HVOF-sprayed and PTA-welded cermet hard phase reinforced Fe-matrix based coatings. 2nd Mediterranean Conference & New Challenges on Heat Treatment and Surface Engineering, Dubrovnik-Cavtat, Crovatia, 11-14 June 2013. Zagreb : Croatian Society for Heat Treatment and Surface Engineering, 37−44.
3.4.
2012
Kulu, P.; Tarbe, R.; Žikin, A.; Sarjas, H.; Surženkov, A. (2012). Abrasive wear resistance of recycled hardmetal reinforced thick coatings. Proceedings 20th IFHTSE: International Federation for Heat Treatment and Surface Engineering Congress, Beijing, China, October 23-25, 2012. Chinese Heat Treatment Society, 541−546.
3.1.
2011
Laurmaa, V.; Kers, J.; Tall, K.; Mikli, V.; Goljandin, D.; Vilsaar, K.; Peetsalu, P.; Saarna, M.; Tarbe, R.; Zhang, L. (2011). Mechanical recycling of electronic wastes for materials recovery. In: Zhang, L.; Krumdick, G.K. (Ed.). Recycling of Electronic Waste II: Proceedings of the Second Symposium (3−10). . Hoboken, New Jersey, USA: John Wiley & Sons Ltd.
6.2.
2010
Kulu, P.; Saarna, M.; Tarbe, R.; Kers, J.; Veinthal, R (2010). Materjaliõpetuse praktikumide ja kodutööde juhendid. TTU Press.
1.1.
2009
Kulu, P.; Tarbe, R.; Käerdi, H.; Goljandin, D. (2009). Abrasivity and grindability study of mineral ores. Wear, 267 (11), 1832−1837. DOI: 10.1016/j.wear.2009.02.025.
1.1.
2009
Veinthal, R.; Tarbe, R.; Kulu, P.; Käerdi, H. (2009). Abrasive erosive wear of powder steels and cermets. Wear, 267 (11), 1838−1844. DOI: 10.1016/j.wear.2009.02.021.
1.2.
2009
Surzenkov, A.; Kulu, P.; Tarbe, R.; Mikli, V.; Sarjas, H.; Latokartano, J. (2009). Wear resistance of laser remelted thermally sprayed coatings. Estonian Journal of Engineering, 15 (4), 318−328.
2.3.
2009
Tarbe, R. (2009). Abrasive impact wear: tester, wear and grindability studies. (Doktoritöö, Tallinna Tehnikaülikool). Tallinn: Tallinn University of Technology Press.
5.2.
2009
Kulu, P.; Surzhenkov, A.; Gregor, A.; Tarbe, R.; Mikli, V.; Latokartano, J.; Müller, H. (2009). Wear properties of duplex treated surfaces. 1st Mediterranean Conference on Heat Treatment and Surface Engineering, Sharm El-Sheikh, Egypt, Dec. 1-3, 2009.
1.1.
2008
Kulu, P.; Veinthal, R.; Käerdi, H.; Tarbe, R. (2008). Abrasive Wear Resistance of Powder Composites at Abrasive Erosion and Abrasive Impact Wear. Materials Science, 14 (4), 328−332.
3.1.
2008
Tarbe, R.; Kulu, P. (2008). Impact Wear Tester for the Study of Abrasive Erosion and Milling Processes. In: Küttner, R. (_EditorsAbbr). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (561−566).. Tallinn: Tallinn University of Technology.
3.4.
2008
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H.; Tarbe, R. (2008). Abrasive Wear Resistance of Powder Composite Materials: Characterization and Prediction. Tribology 2008 : Proceedings of the 9th International Tribology Conference: 9th International Tribology Conference, University of Pretoria, South Africa, 2–4 April 2008. Toim. Vaal, PL de.; Fuller, G. South Africa: South African institute of Tribology, 1.3 (1)−1.3(10).
3.4.
2008
Kulu, P.; Veinthal, R.; Käerdi, H.; Tarbe, R. (2008). Abrasivity study of materials used at abrasive tests. Tribology 2008 : Proceedings of the 9th Inernational Tribology Conference: 9th Inernational Tribology Conference, University of Pretoria, South Africa, 2–4 April 2008. Ed. Vaal, PL de.; Fuller, G. South Africa: South African institute of Tribology, 3.4(1)−3.4(10).
1.1.
2007
Kulu, P.; Veinthal, R.; Saarna, M.; Tarbe, R. (2007). Surface fatigue processes at impact wear of powder materials. Wear, 263, 463−471.
3.2.
2007
Kulu, P.; Tarbe, R.; Veinthal, R (2007). Erosion and impact wear resistance of thermal sprayed coatings. Proceedings of the 20th International Conference on Surface Modification Technologies: Surface Modification Technologies, September 2006, Vienna. Ed. Sudarshan, T.S; Stiglich, J. J. Asm International, 94−99.
1.2.
2006
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterizationa of WC-CO thermal spray coatings based on the composite powders. Powder Metallurgy Progress : Journal of Science and Technology of Particle Materials, 6 (1), 34−41.
1.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder metallurgical materials. Proceedings of the Estonian Academy of Sciences. Engineering, 12 (4), 377−387.
1.2.
2006
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterization of WC-Co composite thermal spray powder and coating. Proceedings of the Estonian Academy of Sciences. Engineering, 12 (4), 435−444.
3.1.
2006
Tarbe, R.; Zimakov, S.; Peetsalu, P.; Kulu, P.; Mikli, V. (2006). Experimental Spray Powders and Coatings Produced from Recycled Hardmetal by Various Mechanical Methods. Euro PM2006 Congress & Exhibition Proceedings, Hard Materials, 1: Euro PM2006, Ghent, Belgium, 23-25 October 2006. Ed. European Powder Metallurgy Association. European Powder Metallurgy Association, 259−264.
3.4.
2006
Kulu, P.; Tarbe, R.; Zimakov, S. (2006). Application of composite thermal sprayed coatings. Proceedings of the International Surface Engineering Congress (ISEC), 15-18 May 2006, Seattle, USA: International Surface Engineering Congress (ISEC), 15-18 May 2006, Seattle, USA. Seattle: Asm International, 19−25.
5.2.
2006
Peetsalu, P.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterization of WC-Co composite thermal spray powder and coating. Proceedings of 15th International Baltic Conference Engineering Materials & Tribology : BALTMATTRIB 2006: The 15th International Baltic Conference Engineering Materials & Tribology, BALTMATTRIB 2006, Tallinn, Estonia, 5-6 Oct. 2006. 52−53.
5.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder materials. Proceedings of 15th International Baltic Conference Engineering Materials & Tribology : BALTMATTRIB 2006: The 15th International Baltic Conference Engineering Materials & Tribology, BALTMATTRIB 2006, Tallinn, Estonia, 5-6 Oct. 2006. , 66−68.
1.2.
2005
Tarbe, R.; Zimakov, S.; Mikli, V.; Kulu, P.; Veinthal, R. (2005). Wear resistant powder coatings on the base of recycled hardmetal. Powder metallurgy progress, 3, 148−157.
1.2.
2005
Kulu, P.; Tarbe, R.; Vallikivi, A. (2005). Abrasive wear of powder materials and coatings. Materials Science (Medžiagotyra), 11 (3), 230−234.
1.2.
2005
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.;Kulu, P. (2005). Technology and characterization of composite thermal spray powders. Materials Science (Medžiagotyra), 11 (4), 385−389.
3.1.
2005
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2005). Characterization of Composite Thermal Spray Powders. Euro PM2005 Powder Metallurgy Congress & Exhibition : Proceedings: Euro PM2005 Powder Metallurgy Congress & Exhibition, Prague Congress Centre, Czech Republic 2 - 5 Oct. 2005. EPMA, 87−92.
5.2.
2005
Tarbe, R.; Peetsalu, P.; Zimakov, S.; Kulu, P. (2005). Spray powders and coatings produced from used hardmetal by various mechanical methods. Abstracts of Papers of 14th International Baltic conference: Materials Engineering - 2005. Kaunas (Lithuania), October 6 - 7. Kaunas: Kauno technologijos universitetas, 39.
5.2.
2005
Kulu, P.; Zimakov, S.; Podgurski, V.; Peetsalu, P.; Tarbe, R. (2005). Nanopowders and nanostructured coatings. In: Nanopowders, Nanostructured Materials and Coatings : Network for Nanostructured Materials of ACC : March 17, 2005, Tallinn, Estonia : book of abstracts (8).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.2.
2004
Mikli, V.; Kulu, P.; Tarbe, R.; Peetsalu, P.; Zimakov, S. (2004). Recycled hardmetal based powders for thermal spray. Proceedings of the Estonian Academy of Sciences. Engineering, 10 (4), 315−325.
3.4.
2004
Mikli, Valdek; Kulu, Priit; Tarbe, Riho; Peetsalu, Priidu (2004). Double-cemented recycled hardmetal based powders for thermal spray. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn, Estonia, 211−214.
3.4.
2004
Zimakov, S.; Mikli, V.; Kulu, P.; Tarbe, R. (2004). Wear resistant sprayed coatings on the base of recycled hardmetal powder. Proc. of 13th Int. Conf. Engineering Materials& Tribology, 2004, Riga. , 83−88.
3.4.
2003
Zimakov, S.;Tarbe, R.; Kulu, P. (2003). New composite coatings on the base of recycled hardmetals. Thermal Spray 2003 : Advancing the Science and Applying the Technology : Proceedings of the 2003 International Thermal Spray Conference: 2003 International Thermal Spray Conference, Orlando (Florida), 5-8 May 2003. _EditorsAbbr Marple, B. R.; Moreau, Chr. Asm International, 455−459.
5.2.
2003
Zimakov, S.; Arensburger, D.;Tarbe, R. (2003). Sprayed coatings on the base of recycled hardmetals. International Conference „Novel Technologies in Powder Metallurgy and Ceramics”: International Conference „Novel Technologies in Powder Metallurgy and Ceramics”, Kiev (Ukraine), 8-12 September 2003. 333.
1.2.
2002
Zimakov, S.; Tarbe, R.; Kulu, P. (2002). Thermally sprayed WC-Co hardmetal based coatings. Materials Science, 8 (4), 409−412.
3.1.
2002
Zimakov, S., Tarbe, R., Veinthal, R., Kulu, P. (2002). Optimization of Structure of Sprayed WC-Co Hardmetal based Coatings. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME": 3rd international DAAAM conference industrial engineering - new challenges to SME, Tallinn (Estonia), 25-27 april 2002. Ed. Papstel, J.; Katalinic, B. Tallinn: Tallinn Technical University, 224−227.
21.05.2020

Riho Tarbe

https://etis.ee/CV/Riho_Tarbe/eng

Qualifications

Academic degrees
Riho Tarbe, Doctor's Degree, 2009, (sup) Priit Kulu; Helmo Käerdi, Abrasive Impact Wear: Tester, Wear and Grindability Studies, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering.
 
 

Completed projects

Publications

Category
Year
Publication
 
1.1.
2017
Kulu, P.; Surženkov, A.; Tarbe, R.; Goljandin, D.; Tarraste, M.; Viljus, M.; Traksmaa, R.; Simson, T. (2017). Wear Resistance of Sintered Composite Hardfacings under Different Abrasive Wear Conditions. Materials Science, 23 (3), 249−253. DOI: 10.5755/j01.ms.23.3.17640.
3.1.
2017
Simson, T.; Kulu, P.; Surženkov, A.; Goljandin, D.; Tarbe, R.; Tarraste, M.; Viljus, M. (2017). Optimization of Structure of Hardmetal Reinforced Iron-Based PM Hardfacings for Abrasive Wear Conditions. In: D. Loca (Ed.). Engineering Materials and Tribology XXV (351−355). Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.351.
3.1.
2017
Surzhenkov, A.; Viljus, M.; Simson, T.; Tarbe, R.; Saarna, M.; Casesnoves, F. (2017). Wear resistance and mechanisms of composite hardfacings at abrasive impact erosion wear. In: 6th International Conference on Fracture Fatigue and Wear 26–27 July 2017, Porto, Portugal (1−10). 6 th International Conference on Fracture Fracture and Wear FFW 2017 Porto, Portugal, 26‐27 July 2017. IOP Publishing Ltd. (Journal of Physics: Conference Series; 843). DOI: 10.1088/1742-6596/843/1/012060.
3.1.
2017
Kulu, P.; Casesnoves, F.; Simson, T.; Tarbe, R. (2017). Prediction of Abrasive Erosion Impact Wear of Composite Hardfacings. In: R. Bendikienė and K. Juzėnas (Ed.). Materials Engineering 2017 (201−206). Trans Tech Publications Ltd. (Solid State Phenomena; 267).10.4028/www.scientific.net/SSP.267.201.
1.1.
2016
Simson, T.; Kulu, P.; Surženkov, A.; Tarbe, R.; Viljus, M.; Tarraste, M.; Goljandin, D. (2016). Optimization of reinforcement content of PM hardfacing in abrasive wear conditions. Proceedings of the Estonian Academy of Sciences, 65 (2), 90−96. DOI: 10.3176/proc.2016.2.03.
3.4.
2016
Surzhenkov, A.; Tarbe, R.; Tarraste, M.; Simson, T.; Viljus, M.; Kulu, P. (2016). Optimization of hardmetal reinforcement content in Fe-based hardfacings for abrasive-impact wear conditions. In: Proceedings of the 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications (xx−xx). Asociace pro tepelné zpracování kovů.
1.1.
2015
Kulu, P.; Tarbe, R.; Saarna, M.; Surzenkov, A.; Peetsalu, P.; Talviste, K. (2015). Wear resistance and selection of steels, hardmetals and hardfacings for abrasive wear conditions. International Journal of Microstructure and Materials Properties, 10 (2), 101−113. DOI: 10.1504/IJMMP.2015.068718.
3.2.
2015
Kulu, P.; Surženkov, A.; Tarbe, R.; Simson, T. (2015). Abrasive impact wear resistance of hardfacings. Proceedings - European Conference on Heat Treatment and 22st IFHTSE Congress: European Conference on Heat Treatment and 22st IFHTSE Congress, Venice, Italy, 20-22 May 2015. Itaalia: Associazione Italiana di Metallurgia, 1−9.
1.1.
2014
Kulu, P.; Käerdi, H.; Surzenkov, A.; Tarbe, R.; Veinthal, R.; Goljandin, D.; Zikin, A. (2014). Recycled hardmetal-based powder composite coatings: optimisation of composition, structure and properties. International Journal of Materials and Product Technology, 49, 180−202. DOI: 10.1504/IJMPT.2014.064038.
3.1.
2014
Tarbe, R.; Kulu, P.; Zikin, A.; Surzhenkov, A. (2014). Abrasive Wear Resistance of HVOF Sprayed and PTA-welded Hardmetal Hard Phase Reinforced Metal-Matrix Based Coatings. In: D. Loca (Ed.). Engineering Materials & Tribology XXII (3−7). . Trans Tech Publications Ltd. (Key Engineering Materials; 604).
3.2.
2014
Kulu, P.; Surzhenkov, A.; Tarbe, R.; Viljus, M.; Saarna, M.; Tarraste, M. (2014). Hardfacings for Extreme Abrasive Wear Applications. Proceedings of the 28th International Conference on Surface Modification Technologies: 28th International Conference on Surface Modification Technologies, Tampere, Finland, June 16th–18th, 2014. Valardocs, 149−157.
3.2.
2014
Kulu, P.; Surzhenkov, A.; Tarbe, R.; Saarna, M.; Tarraste, M.; Viljus, M. (2014). Hardfacings for Extreme Wear Applications. In: T. S. Sudarshan, P. Vuoristo, H. Koivuluoto (Ed.). Proceedings of the XXVIII International Conference on Surface Modification Technologies (149−157). Valardocs.
1.1.
2013
Veinthal, R.; Sergejev, F.; Zikin, A.; Tarbe, R.; Hornung, J. (2013). Abrasive impact wear and surface fatigue wear behaviour of Fe-Cr-C PTA overlays. Wear, 301, 102−108. DOI: 10.1016/j.wear.2013.01.077.
3.1.
2013
Kulu, P.; Tarbe, R.; Žikin, A.; Sarjas, H.; Surženkov, A. (2013). Abrasive Wear Resistance of Recycled Hardmetal Reinforced Thick coating. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (185−190). Trans Tech Publications Ltd. (Key Engineering Materials; 527). DOI: 10.4028/www.scientific.net/KEM.527.185.
3.2.
2013
Kulu, P.; Žikin, A.; Surženkov, A.; Tarbe, R. (2013). Structure and properties of HVOF-sprayed and PTA-welded cermet hard phase reinforced Fe-matrix based coatings. 2nd Mediterranean Conference & New Challenges on Heat Treatment and Surface Engineering, Dubrovnik-Cavtat, Crovatia, 11-14 June 2013. Zagreb : Croatian Society for Heat Treatment and Surface Engineering, 37−44.
3.4.
2012
Kulu, P.; Tarbe, R.; Žikin, A.; Sarjas, H.; Surženkov, A. (2012). Abrasive wear resistance of recycled hardmetal reinforced thick coatings. Proceedings 20th IFHTSE: International Federation for Heat Treatment and Surface Engineering Congress, Beijing, China, October 23-25, 2012. Chinese Heat Treatment Society, 541−546.
3.1.
2011
Laurmaa, V.; Kers, J.; Tall, K.; Mikli, V.; Goljandin, D.; Vilsaar, K.; Peetsalu, P.; Saarna, M.; Tarbe, R.; Zhang, L. (2011). Mechanical recycling of electronic wastes for materials recovery. In: Zhang, L.; Krumdick, G.K. (Ed.). Recycling of Electronic Waste II: Proceedings of the Second Symposium (3−10). . Hoboken, New Jersey, USA: John Wiley & Sons Ltd.
6.2.
2010
Kulu, P.; Saarna, M.; Tarbe, R.; Kers, J.; Veinthal, R (2010). Materjaliõpetuse praktikumide ja kodutööde juhendid. TTU Press.
1.1.
2009
Kulu, P.; Tarbe, R.; Käerdi, H.; Goljandin, D. (2009). Abrasivity and grindability study of mineral ores. Wear, 267 (11), 1832−1837. DOI: 10.1016/j.wear.2009.02.025.
1.1.
2009
Veinthal, R.; Tarbe, R.; Kulu, P.; Käerdi, H. (2009). Abrasive erosive wear of powder steels and cermets. Wear, 267 (11), 1838−1844. DOI: 10.1016/j.wear.2009.02.021.
1.2.
2009
Surzenkov, A.; Kulu, P.; Tarbe, R.; Mikli, V.; Sarjas, H.; Latokartano, J. (2009). Wear resistance of laser remelted thermally sprayed coatings. Estonian Journal of Engineering, 15 (4), 318−328.
2.3.
2009
Tarbe, R. (2009). Abrasive impact wear: tester, wear and grindability studies. (Doktoritöö, Tallinna Tehnikaülikool). Tallinn: Tallinn University of Technology Press.
5.2.
2009
Kulu, P.; Surzhenkov, A.; Gregor, A.; Tarbe, R.; Mikli, V.; Latokartano, J.; Müller, H. (2009). Wear properties of duplex treated surfaces. 1st Mediterranean Conference on Heat Treatment and Surface Engineering, Sharm El-Sheikh, Egypt, Dec. 1-3, 2009.
1.1.
2008
Kulu, P.; Veinthal, R.; Käerdi, H.; Tarbe, R. (2008). Abrasive Wear Resistance of Powder Composites at Abrasive Erosion and Abrasive Impact Wear. Materials Science, 14 (4), 328−332.
3.1.
2008
Tarbe, R.; Kulu, P. (2008). Impact Wear Tester for the Study of Abrasive Erosion and Milling Processes. In: Küttner, R. (_EditorsAbbr). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (561−566).. Tallinn: Tallinn University of Technology.
3.4.
2008
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H.; Tarbe, R. (2008). Abrasive Wear Resistance of Powder Composite Materials: Characterization and Prediction. Tribology 2008 : Proceedings of the 9th International Tribology Conference: 9th International Tribology Conference, University of Pretoria, South Africa, 2–4 April 2008. Toim. Vaal, PL de.; Fuller, G. South Africa: South African institute of Tribology, 1.3 (1)−1.3(10).
3.4.
2008
Kulu, P.; Veinthal, R.; Käerdi, H.; Tarbe, R. (2008). Abrasivity study of materials used at abrasive tests. Tribology 2008 : Proceedings of the 9th Inernational Tribology Conference: 9th Inernational Tribology Conference, University of Pretoria, South Africa, 2–4 April 2008. Ed. Vaal, PL de.; Fuller, G. South Africa: South African institute of Tribology, 3.4(1)−3.4(10).
1.1.
2007
Kulu, P.; Veinthal, R.; Saarna, M.; Tarbe, R. (2007). Surface fatigue processes at impact wear of powder materials. Wear, 263, 463−471.
3.2.
2007
Kulu, P.; Tarbe, R.; Veinthal, R (2007). Erosion and impact wear resistance of thermal sprayed coatings. Proceedings of the 20th International Conference on Surface Modification Technologies: Surface Modification Technologies, September 2006, Vienna. Ed. Sudarshan, T.S; Stiglich, J. J. Asm International, 94−99.
1.2.
2006
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterizationa of WC-CO thermal spray coatings based on the composite powders. Powder Metallurgy Progress : Journal of Science and Technology of Particle Materials, 6 (1), 34−41.
1.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder metallurgical materials. Proceedings of the Estonian Academy of Sciences. Engineering, 12 (4), 377−387.
1.2.
2006
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterization of WC-Co composite thermal spray powder and coating. Proceedings of the Estonian Academy of Sciences. Engineering, 12 (4), 435−444.
3.1.
2006
Tarbe, R.; Zimakov, S.; Peetsalu, P.; Kulu, P.; Mikli, V. (2006). Experimental Spray Powders and Coatings Produced from Recycled Hardmetal by Various Mechanical Methods. Euro PM2006 Congress & Exhibition Proceedings, Hard Materials, 1: Euro PM2006, Ghent, Belgium, 23-25 October 2006. Ed. European Powder Metallurgy Association. European Powder Metallurgy Association, 259−264.
3.4.
2006
Kulu, P.; Tarbe, R.; Zimakov, S. (2006). Application of composite thermal sprayed coatings. Proceedings of the International Surface Engineering Congress (ISEC), 15-18 May 2006, Seattle, USA: International Surface Engineering Congress (ISEC), 15-18 May 2006, Seattle, USA. Seattle: Asm International, 19−25.
5.2.
2006
Peetsalu, P.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterization of WC-Co composite thermal spray powder and coating. Proceedings of 15th International Baltic Conference Engineering Materials & Tribology : BALTMATTRIB 2006: The 15th International Baltic Conference Engineering Materials & Tribology, BALTMATTRIB 2006, Tallinn, Estonia, 5-6 Oct. 2006. 52−53.
5.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder materials. Proceedings of 15th International Baltic Conference Engineering Materials & Tribology : BALTMATTRIB 2006: The 15th International Baltic Conference Engineering Materials & Tribology, BALTMATTRIB 2006, Tallinn, Estonia, 5-6 Oct. 2006. , 66−68.
1.2.
2005
Tarbe, R.; Zimakov, S.; Mikli, V.; Kulu, P.; Veinthal, R. (2005). Wear resistant powder coatings on the base of recycled hardmetal. Powder metallurgy progress, 3, 148−157.
1.2.
2005
Kulu, P.; Tarbe, R.; Vallikivi, A. (2005). Abrasive wear of powder materials and coatings. Materials Science (Medžiagotyra), 11 (3), 230−234.
1.2.
2005
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.;Kulu, P. (2005). Technology and characterization of composite thermal spray powders. Materials Science (Medžiagotyra), 11 (4), 385−389.
3.1.
2005
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2005). Characterization of Composite Thermal Spray Powders. Euro PM2005 Powder Metallurgy Congress & Exhibition : Proceedings: Euro PM2005 Powder Metallurgy Congress & Exhibition, Prague Congress Centre, Czech Republic 2 - 5 Oct. 2005. EPMA, 87−92.
5.2.
2005
Tarbe, R.; Peetsalu, P.; Zimakov, S.; Kulu, P. (2005). Spray powders and coatings produced from used hardmetal by various mechanical methods. Abstracts of Papers of 14th International Baltic conference: Materials Engineering - 2005. Kaunas (Lithuania), October 6 - 7. Kaunas: Kauno technologijos universitetas, 39.
5.2.
2005
Kulu, P.; Zimakov, S.; Podgurski, V.; Peetsalu, P.; Tarbe, R. (2005). Nanopowders and nanostructured coatings. In: Nanopowders, Nanostructured Materials and Coatings : Network for Nanostructured Materials of ACC : March 17, 2005, Tallinn, Estonia : book of abstracts (8).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.2.
2004
Mikli, V.; Kulu, P.; Tarbe, R.; Peetsalu, P.; Zimakov, S. (2004). Recycled hardmetal based powders for thermal spray. Proceedings of the Estonian Academy of Sciences. Engineering, 10 (4), 315−325.
3.4.
2004
Mikli, Valdek; Kulu, Priit; Tarbe, Riho; Peetsalu, Priidu (2004). Double-cemented recycled hardmetal based powders for thermal spray. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn, Estonia, 211−214.
3.4.
2004
Zimakov, S.; Mikli, V.; Kulu, P.; Tarbe, R. (2004). Wear resistant sprayed coatings on the base of recycled hardmetal powder. Proc. of 13th Int. Conf. Engineering Materials& Tribology, 2004, Riga. , 83−88.
3.4.
2003
Zimakov, S.;Tarbe, R.; Kulu, P. (2003). New composite coatings on the base of recycled hardmetals. Thermal Spray 2003 : Advancing the Science and Applying the Technology : Proceedings of the 2003 International Thermal Spray Conference: 2003 International Thermal Spray Conference, Orlando (Florida), 5-8 May 2003. _EditorsAbbr Marple, B. R.; Moreau, Chr. Asm International, 455−459.
5.2.
2003
Zimakov, S.; Arensburger, D.;Tarbe, R. (2003). Sprayed coatings on the base of recycled hardmetals. International Conference „Novel Technologies in Powder Metallurgy and Ceramics”: International Conference „Novel Technologies in Powder Metallurgy and Ceramics”, Kiev (Ukraine), 8-12 September 2003. 333.
1.2.
2002
Zimakov, S.; Tarbe, R.; Kulu, P. (2002). Thermally sprayed WC-Co hardmetal based coatings. Materials Science, 8 (4), 409−412.
3.1.
2002
Zimakov, S., Tarbe, R., Veinthal, R., Kulu, P. (2002). Optimization of Structure of Sprayed WC-Co Hardmetal based Coatings. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME": 3rd international DAAAM conference industrial engineering - new challenges to SME, Tallinn (Estonia), 25-27 april 2002. Ed. Papstel, J.; Katalinic, B. Tallinn: Tallinn Technical University, 224−227.
21.05.2020

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 10 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
IUTIUT19-29 Mitmeastmeliselt struktureeritud keraamika-baasil komposiitmaterjalid kasutamiseks ekstreemtingimustes 01.01.201431.12.2019Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond; Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 1 770 000,00 EUR
MUUIN578Doktorikool - Uued tootmistehnoloogia ja protsessid01.10.200530.06.2008Andres ÖpikTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Keemia ja materjalitehnoloogia teaduskond, Materjaliteaduse instituut, Füüsikalise keemia õppetool471 348,41 EUR
MUUVERT17065Innovaatilised meetodid Interdistsiplinaarsuse rakendamine karjäärinõustamises01.09.201628.02.2019Eduard ŠevtšenkoTallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 38 448,00 EUR
ETFETF7227Komposiitmaterjalide ja -pinnete kulumiskindluse modelleerimine01.01.200731.12.2009Renno VeinthalTallinna Tehnikaülikool, Mehaanikateaduskond23 382,46 EUR
SFSF0142505s03Kulumiskindlad materjalid ja kulumine01.01.200331.12.2007Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond668 100,42 EUR
MUUAR12132Kõrgtehnoloogiliste pinnete ja komposiitmaterjalide arendus kuluosade tarvis (Wear Hard)01.07.201231.12.2014Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut182 889,15 EUR
SFSF0140091s08Kõvapinded ja pinnatehnika01.01.200831.12.2013Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond705 840,56 EUR
MUUV301Materjalide löökkulumise uurimine01.11.200530.04.2006Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool3 080,54 EUR
ETFETF5881Nanopulbrid ja nanostruktuursed pinded01.01.200431.12.2006Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond33 511,51 EUR
SFSF0142082s02Pihustus- ja sadestuspinded (materjalid, tehnoloogia, omadused)01.01.200231.12.2005Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond290 861,92 EUR