See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Mart Saarna

https://etis.ee/CV/Mart_Saarna/est
+372 620 3353
mart.saarna@taltech.ee
AAC-7254-2020

Teenistuskäik

Töökohad ja ametid
01.09.2019–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Vanemlektor (1,00)
01.01.2017–31.08.2019   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Dotsent (1,00)
01.09.2011–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Dotsent (1,00)
01.01.2011–31.12.2012   
Šveitsi materjaliteaduse ja tehnoloogia instituut (EMPA), järeldoktorantuur
01.09.2009–31.08.2011   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Assistent (1,00)
2004–2009   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool, Assistent (1,00)
2002–2004   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Teadur (0,75)
2000–2002   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Insener (0,50)
 
 
Haridustee
2002–2008   
Tallinna Tehnikaülikool, doktoriõpe, Masina ja aparaadiehitus
2001–2002   
Tallinna Tehnikaülikool, magistriõpe, Tootmistehnika eriala.
1997–2001   
Tallinna Tehnikaülikool, bakalaureuseõpe, Tootmistehnika eriala.
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2017−2019   
Mehaanika ja tööstustehnika instituudi nõukogu liige
2014−2016   
TTÜ Mehaanikateaduskonna nõukogu liige
2009−2010   
TTÜ Materjalitehnika instituudi nõukogu liige
2009−2009   
TTÜ tribolabori juhataja
2007−2009   
Eesti Mehaanikainseneride Liidu juhatuse liige
2002−2015   
Eesti Materjalitehnika Ühingu liige
 
 
Lisainfo
Vastutav õppejõud õppeainetes:
Bakalaureuse õpe
MTX0010 Materjalitehnika 12 EAP
MTM0120 Materjali ja tehnoloogia valik 6 EAP
MTM0170 Materjali ja tehnoloogia valik 6 EAP
MTM0010 Tehnomaterjalid 6 EAP
MXX0070 Materjalide uurimismeetodid ja katsetamine 9 EAP
MTM0070 Materjalitehnika 6 EAP (EST
MTX0020 Metallid ja tehniline keraamika 6 EAP
Magistriõpe
MTM0140 Materjaliõpetus 3 EAP
EMM0010 Materjalitehnika II 6 EAP

E-kursuse looja ja arendaja:
Bakalaureuse õpe
MTX0010 Materjalitehnika 12 EAP
MTM0120 Materjali ja tehnoloogia valik 6 EAP
MTM0170 Materjali ja tehnoloogia valik 6 EAP
MTM0010 Tehnomaterjalid 6 EAP
MXX0070 Materjalide uurimismeetodid ja katsetamine 9 EAP
MTM0070 Materjalitehnika 6 EAP (EST)
MTX0020 Metallid ja tehniline keraamika 6 EAP
Magistriõpe
EMM0010 Materjalitehnika II 6 EAP
Doktoriõpe
MTX9110 Materjaliõpetuse eripeatükid 6 EAP
EMM9010 Kõrgtehnoloogia materjalid 6 EAP

Õppetööalane tunnustus
2018 Mehaanika ja tööstustehnika instituut aasta õppejõud
2016 Mehaanika teaduskonna aasta õppejõud
2012 Mehaanika teaduskonna aasta õppejõud

Täiendkoolitused (lektor):
2018 SA INNOVE "Materjalide katsetamine ja tehnomaterjalid" kokku 24 tundi, vastutav täitja. 4 tundi loenguid, 4 tundi praktikume (organiseerija)
2018 Mehaanikainseneri meistriklass, 2 tundi
2016 Magnetic MRO, 6 tundi (organiseerija)
2016 Merko AS, 4 tundi
2014 Air Maintenece Estonia, 6 tundi (organiseerija).
2011 E-profiil AS, 4 tundi
2010 Keevitustehnoloogaid ja nende otstarbekad rakendused ettevõtetes, 2 tundi
2008 SA INNOVE projekti raames täienduskoolituse
"Konstruktsioonmaterjalide mehaanika" läbiviimine komposiitmaterjalide valdkonnas Eesti ettevõtete materjalitehnoloogidele ja kvaliteediinseneridele, 24 tundi + e-õpe

Erialane täiendav tegevus:
2000-... Praktiline kogemus purustava kontrolli valdkonnas töötades Tallinna Tehnikaülikooli Mehaanika ja Metroloogia Katselaboris
2000-2010 Praktiline kogemus mittepurustava kontrolli spetsialistina (Tase 2). Visuaal-, kapilaar- ja magnetpulber kontrolli valdkonnas Tallinna Tehnikaülikooli Mehaanika ja Metroloogia Katselaboris

Kvalifikatsioon

Teaduskraadid
Mart Saarna, doktorikraad, 2008, (juh) Priit Kulu, Fatique Characteristics of PM Steels (Pulberteraste väsimuskarakteristikud), Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut.
Mart Saarna, magistrikraad, 2002, (juh) Priit Kulu, Raudtee rööpmestiku kontroll Tallinna Tehnikaülikooli Katsekoja mehaanikalaboris, Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool.
 
 
Teaduspreemiad ja tunnustused
0, Mart Saarna, Diplomeeritud mehaanikainsener (Dipl Meh Ins) V, 2004
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS KLASSIFIKAATOR: T450 Metallitehnoloogia, metallurgia, metallitooted

Jooksvad projektid

Lõppenud projektid

Juhendamisel väitekirjad

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2021
Alao, P. F.; Marrot, L.; Burnard, M, D.; Lavrič, G.; Saarna, M.; Kers, J. (2021). Impact of Alkali and Silane Treatment on Hemp/PLA Composites’ Performance: from Micro to Macro Scale. Polymers, 13 (6), #851. DOI: 10.3390/polym13060851.
3.1.
2020
Kiitam, I.; Saarna, M.; Taklaja, P.; Tealane, M.; Palu, I. (2020). Electrical and Mechanical Properties of Service-aged Medium Voltage Porcelain Support Insulators. 2020 6th IEEE International Energy Conference (ENERGYCon): 2020 6th IEEE International Energy Conference (ENERGYCon), Gammarth, Tunis, Tuneesia, 28. sept - 1. okt 2020. IEEE, 702−706. DOI: 10.1109/ENERGYCon48941.2020.9236596.
1.1.
2019
Holovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, Renno (2019). Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites. International Journal of Refractory Metals and Hard Materials, 105087. DOI: 10.1016/j.ijrmhm.2019.105087.
3.1.
2017
Surzhenkov, A.; Viljus, M.; Simson, T.; Tarbe, R.; Saarna, M.; Casesnoves, F. (2017). Wear resistance and mechanisms of composite hardfacings at abrasive impact erosion wear. In: 6th International Conference on Fracture Fatigue and Wear 26–27 July 2017, Porto, Portugal (1−10). 6 th International Conference on Fracture Fracture and Wear FFW 2017 Porto, Portugal, 26‐27 July 2017. IOP Publishing Ltd. (Journal of Physics: Conference Series; 843). DOI: 10.1088/1742-6596/843/1/012060.
3.1.
2017
Saarna, M.; Lind, L.; Peetsalu, P.; Sergejev, F. (2017). Cyclic Loading of TiCN Coating by Vickers Indentation. In: D. Loca (Ed.). Engineering Materials and Tribology XXV (425−429). Baltmattrib 2016, Riia, 3-4 November. Trans Tech Publications Ltd : Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.425.
1.1.
2016
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Beilmann, J. (2016). Decarburisation Effect on Hardened Strip Steel Fastening Components. Materials Science, 22 (1), 148−152. DOI: 10.5755/j01.ms.22.1.7467.
1.1.
2016
Jaason, K; Peetsalu, P.; Kulu, P.; Saarna, M.; Beilmann, J. (2016). Predictive tools for the isothermal hardening of strip steel parts in molten salt. Proceedings of the Estonian Academy of Sciences, 65 (2), 152−158. DOI: 10.3176/proc.2016.2.04.
1.1.
2016
Sepper, S.; Peetsalu, P.; Kulu, P.; Saarna, M.; Mikli, V. (2016). The role of silicon in the hot dip galvanizing process. Proceedings of the Estonian Academy of Sciences, 65 (2), 159−165. DOI: 10.3176/proc.2016.2.11.
3.3.
2016
Kübarsepp, J.; Kulu, P.; Laansoo, A.; Karjust, K.; Saarna, M. (2016). Materjalitehnika seletav sõnaraamat:eesti-inglise-vene. Tallinna Tehnikaülikooli Kirjastus.
1.1.
2015
Kulu, P.; Tarbe, R.; Saarna, M.; Surzenkov, A.; Peetsalu, P.; Talviste, K. (2015). Wear resistance and selection of steels, hardmetals and hardfacings for abrasive wear conditions. International Journal of Microstructure and Materials Properties, 10 (2), 101−113. DOI: 10.1504/IJMMP.2015.068718.
3.1.
2015
Veinthal, R.; Peetsalu, P.; Saarna, M.; Sergejev, F. (2015). Punch lifetime in fine-blanking with optimum combination of mechanical properties. In: Proceedings - European Conference on Heat Treatment and 22st IFHTSE Congress (1−7). . Venice, Italy: Associazione Italiana di Metallurgia (AIM).
6.7.
2015
Taklaja, P.; Kiitam, I.; Peetsalu, P.; Saarna, M.; Kurissoo, L. (2015). Vananevate juhtmete füüsikalised omadused. Tallinn: TTÜ elektroenergeetika instituut.
1.1.
2014
Kwon, H.; Saarna, M.; Yoon, S.; Weidenkaff, A.; Leparoux, M. (2014). Effect of milling time on dual-nanoparticulate-reinforced aluminum alloy matrix composite materials. Materials Science and Engineering A, 590, 338−345. DOI: 10.1016/j.msea.2013.10.046.
3.2.
2014
Kulu, P.; Surzhenkov, A.; Tarbe, R.; Viljus, M.; Saarna, M.; Tarraste, M. (2014). Hardfacings for Extreme Abrasive Wear Applications. Proceedings of the 28th International Conference on Surface Modification Technologies: 28th International Conference on Surface Modification Technologies, Tampere, Finland, June 16th–18th, 2014. Valardocs, 149−157.
3.2.
2014
Kulu, P.; Tarbe, R.; Saarna, M.; Surzenkov, A.; Peetsalu, P.; Viljus, M. (2014). Steels, hardmetals and hardfacings for abrasive wear applications. European Conference on Heat Treatment and 21st IFHTSE Congress, Munich, Germany, 12-15 May 2014. IFHTSE , 449−456.
3.2.
2014
Kulu, P.; Surzhenkov, A.; Tarbe, R.; Saarna, M.; Tarraste, M.; Viljus, M. (2014). Hardfacings for Extreme Wear Applications. In: T. S. Sudarshan, P. Vuoristo, H. Koivuluoto (Ed.). Proceedings of the XXVIII International Conference on Surface Modification Technologies (149−157). Valardocs.
3.4.
2014
Veinthal, R.; Peetsalu, P.; Saarna, M.; Talkop, A. (2014). Durability of Complex Shape Punch in Thick Sheet Metal Fine-blanking. Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress, May 12th-15th, Munich, Germany. Ed. H-W. Zoch, R. Schneider, T. Lübben. Munich, Germany: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V (AWT); www.awt-online.org, 399−406.
1.1.
2013
Kommel, L.; Kimmari, E.; Saarna, M.; Viljus, M. (2013). Processing and properties of bulk ultrafine-grained pure niobium. Journal of Materials Science, 48 (13), 4723−4729. DOI: 10.1007/s10853-013-7210-3.
3.1.
2013
Saarna, M.; Sergejev, F.; Gomon, J.K.; Kollo, L.; Leparoux, M. (2013). Surface Fatigue of Al-Metal Matrix Composites at Impact Loading. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (119−124). . Trans Tech Publications Ltd. (Key Engineering Materials; 527).
3.3.
2013
Kübarsepp, J.; Kulu, P.; Laansoo, A.; Karjust, K.; Saarna, M. (2013). Materjalitehnika seletav sõnaraamat. Eesti - inglise - vene. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2012
Surzhenkov, A.; Põdra, P.; Sergejev, F.; Saarna, M.; Adoberg, E.; Mikli, V.; Viljus, M.; Kulu, P. (2012). Comparative Study of the PVD Coatings on the Plasma Nitrided Steel. Materials Science, 18 (1), 40−44. DOI: 10.5755/j01.ms.18.1.1339.
1.2.
2012
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Mikli, V.; Lind, L.; Beilmann, J. (2012). Influence of Steel Austenitization to Part Quality in Continuous Austempering. Estonian Journal of Engineering, 18 (3), 221−231.
3.1.
2012
Sepper, S.; Peetsalu, P.; Mikli, V.; Saarna, M. (2012). The effect of substrate microstructure on morphology of zinc coatings. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 2: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Ed. Otto, T. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 717−722.
3.4.
2012
Sepper, S.; Peetsalu, P.; Saarna, M.; Kirs, V.; Mikli, V. (2012). High strength steel behaviour during hot dip galvanizing. Proceedings 20th IFHTSE: International Federation for Heat Treatment and Surface Engineering Congress, Beijing, China, October 23-25, 2012. Chinese Heat Treatment Society, 525−529.
6.2.
2012
Herranen, H.; Karjust, K.; Kers, J.; Krustok, J.; Kulu, P.; Käerdi, H.; Laansoo, A.; Lend, H.; Otto, T.; Põdra, P.; Riives, J.; Saarna, M.; Sergejev, F.; Tiidemann, T.; Veinthal, R. (tõlkijad) (2012). Mehhanotehnika ja metallide käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.7.
2012
Herranen, H.; Karjust, K.; Kers, J.; Krustok, J.; Kulu, P.; Käerdi, H.; Laansoo, A.; Lend, H.; Otto, T.; Põdra, P.; Riives, J.; Saarna, M.; Sergejev, F.; Tiidemann, T.; Veinthal, R. [tõlkijad] (2012). Mehaanikainseneri käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2011
Herranen, H.; Pabut, O.; Eerme, M.; Majak, J.; Pohlak, M.; Kers, J.; Saarna, M.; Allikas, G.; Aruniit, A. (2011). Design and Testing of Sandwich Structures with Different Core Materials. Journal of Materials Science of Kaunas University of Technology, 17 (4), 1−6.
1.1.
2011
Aruniit, A., Kers, J., Goljandin, D., Saarna, M., Tall, K., Majak, J., Herranen, H. (2011). Particulate Filled Composite Plastic Materials from Recycled Glass Fibre Reinforced Plastics. Materials Science, 17 (3), 276−281.
1.1.
2011
Sergejev, F.; Peetsalu, P.; Sivitski, A.; Saarna, M.; Adoberg, E.. (2011). Surface fatigue and wear of PVD coated punches during fine blanking operation. Engineering Failure Analysis, 18 (7), 1689−1697. DOI: 10.1016/j.engfailanal.2011.02.011.
1.2.
2011
Sepper, S.; Peetsalu, P.; Saarna, M. (2011). Methods to evaluate the appearance of hot dip galvanized coatings. Agronomy Research, 9, 229−236.
3.1.
2011
Kommel, L.; Mikli, V.; Traksmaa, R.; Saarna, M.; Pokartilov, A.; Pikker, S.; Kommel, I. (2011). Influence of the SPD Processing Feartures on the Nanostructure and Properties of a Pure Niobium. Nanomaterials by Severe Plastic Deformation: NanoSPD5, 2: 5th International Conference on Nanomaterials by Severe Plastic Deformation held in Nanjing, China on March 21-25, 2011. Ed. Jing Tao Wang, Roberto B. Figueiredo, Terence G. Langdon. Trans Tech-Scitec Publications Ltd, 785−790. (Materials Science Forum ; 667-669). DOI: 10.4028/www.scientific.net/MSF.667-669.785.
3.1.
2011
Laurmaa, V.; Kers, J.; Tall, K.; Mikli, V.; Goljandin, D.; Vilsaar, K.; Peetsalu, P.; Saarna, M.; Tarbe, R.; Zhang, L. (2011). Mechanical recycling of electronic wastes for materials recovery. In: Zhang, L.; Krumdick, G.K. (Ed.). Recycling of Electronic Waste II: Proceedings of the Second Symposium (3−10). . Hoboken, New Jersey, USA: John Wiley & Sons Ltd.
5.2.
2011
Kers, J.; Saarna, M.; Peetsalu, P.; Aruniit, A.; Majak, J.; Pohlak, M.; Herranen, H. (2011). Selection of parameters in adhesive bonding of composite structures. 20th International Baltic Conference, Materials Engineering 2011, Book of Abstracts: 20th International Baltic Conference, Materials Engineering, Kaunas, Lihtuania, October 27-28. Kaunas, Lithuania: Kaunas University of Technology Press, 53−53.
1.2.
2010
Kers, J.; Peetsalu, P.; Saarna, M.; Viikna, A.; Krumme, A.; Menind, A. (2010). Preliminary investigation into tensile characteristics of long flax fibre reinforced composite material. Agronomy Research, 8, 107−114.
3.1.
2010
Kulu, P.; Saarna, M.; Sergejev, F.; Gregor, A.; Surženkov, A. (2010). Selection of coating systems and processes for different wear conditions. Proceedings of 14th Nordic Symposium on Tribology, NORDTRIB 2010: 14th Nordic Symposium on Tribology, NORDTRIB 2010, 08.06 - 11.06.2010, Storforsen, Sweden. Lulea University of Technology, 1−8.
3.1.
2010
Kers, J; Goljandin, D.; Tall, K.; Aruniit, A.; Adoberg, E.; Saarna, M.; Majak, J. (2010). Modelling and Testing of the Properties of Recovered Composite Material. Proceedings of the Tenth International Conference on Computational Structures Technology: Tenth International Conference on Computational Structures Technology, Valencia- Spain, 14-17 September 2010. Ed. B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru, M.L. Romero. Civil-Comp Press, 1−12. DOI: 10.4203/ccp.93.81.
3.2.
2010
Kers, J.; Majak, J.; Goljandin, D.; Saarna, M.; Gregor, A.; Siinmaa, A.; Tall, K. (2010). DESIGN AND TESTING OF NEW COMPOSITE FROM RECYCLED GFRP. 14th European Conference on Composite Materials. Ed. Kollar, L.; Czigany, T.; Karger-Kocsis. Budapest University of Technology, 1−10.
3.2.
2010
Peetsalu, P.; Saarna, M.; Adoberg, E.; Kulper, E.; Lind, L.; Kulu, P. (2010). Evaluation of punch wear resistance during industrial test. Acta Metallurgica Slovaca Conference, 1: 14th International Symposium on Metallography, 28-30 April 2010, Starà Lesnà, Slovak Republic. , 105−110.
3.4.
2010
Kulu, P.; Saarna, M.; Sergejev, F.; Gregor, A.; Sivitski, A.; Müller, H. (2010). Surface Fatigue and Wear Resistance of Thin and Thick Hard Coatings. 18th Congress IFHTSE International Federation for Heat Treatment and Surface Engineering 18th Congress. Ed. Karlheinz Pohlmann; Nelson Guedes de Alcantara.
6.2.
2010
Kulu, P.; Saarna, M.; Tarbe, R.; Kers, J.; Veinthal, R (2010). Materjaliõpetuse praktikumide ja kodutööde juhendid. TTU Press.
1.2.
2009
Sivitski, A.; Gregor, A.; Saarna, M.; Kulu, P.; Sergejev, F. (2009). Properties and Performance of Hard Coatings on Tool Steels under Cyclic Indentation. Acta Mechanica Slovaca, 13 (4), 84−94.
1.2.
2009
Sivitski, A.; Gregor, A.; Saarna, M.; Kulu, P.; Sergejev, F. (2009). Application of the indentation method for cracking resistance evaluation of hard coatings on tool steels. Estonian Journal of Engineering, 15 (4), 309−317.
3.1.
2008
Saarna, M., Peetsalu, P. (2008). Effect of mean stress on fatigue strength of duplex steels in synthetic white water environment. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (531−536). . Tallinn: Tallinn University of Technology.
6.2.
2008
Laansoo, A.; Saarna, M. (koostajad) (2008). Materjalitehnika : tehnoloogiaprotsessid : laboratoorsete ja kodutööde juhendid. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2007
Kulu, P.; Veinthal, R.; Saarna, M.; Tarbe, R. (2007). Surface fatigue processes at impact wear of powder materials. Wear, 263, 463−471.
1.2.
2007
Peetsalu, P.; Saarna, M.; .Mikli, V.; Juurma, M. (2007). Computer Based Steel Microstructure Analysis Describing the Size and Distribution of Structure Phases. Acta Metallurgica Slovaca, 13, 91−95.
3.4.
2007
Peetsalu, P.; Saarna, M.; Mikli, V. (2007). Assesment of Non-metallic Inclusions in Sheet Metals by Computer Analysis. Proceedings of the Seventh Inernational Conference on Clean Steel: sevent international conference Clean Steel, Hungary 2007. Balatonfüred, Hungary: Hungarian Mining and Metallurgical society (OMBKE), 332−341.
1.2.
2006
Saarna, M. (2006). Fatigue of Duplex Steels in Synthetic White Water Environment. Powder Metallurgy Progress : Journal of Science and Technology of Particle Materials, 6 (3), 142−145.
1.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder metallurgical materials. Proceedings of the Estonian Academy of Sciences. Engineering, 12 (4), 377−387.
1.2.
2006
Laansoo, A.; Kübarsepp, J.; Saarna, M.; Klaasen, H. (2006). Internal Stresses in Diffusion Bonded Joints. Proceedings of the Lithuanian Academy of Sciences. Materials Science, 12 (2), 110−113.
1.3.
2006
Saarna, Mart (2006). Fatigue of duplex steels in corrosive environment. Tallinn : Tallinn University of Technology: TTY puuduv kirjastus, 289−293.
5.2.
2006
Kommel, L.; Hussainova, I.; Veinthal, R.; Saarna, M. (2006). Stability and damage of nanocrystalline copper at cyclic elastic-plastic deformation. Ultrafine Grained Materials - from Basics to Applications: UFG - 2006, September 25 - 27, 2006, Kloster Irsee, Germany. Germany, 3-17−3-19.
5.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder materials. Proceedings of 15th International Baltic Conference Engineering Materials & Tribology : BALTMATTRIB 2006: The 15th International Baltic Conference Engineering Materials & Tribology, BALTMATTRIB 2006, Tallinn, Estonia, 5-6 Oct. 2006. , 66−68.
15.03.2021

Mart Saarna

https://etis.ee/CV/Mart_Saarna/eng
+372 620 3353
mart.saarna@taltech.ee
AAC-7254-2020

Career

Institutions and positions
01.09.2019–...   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Senior Lecturer (1,00)
01.01.2017–31.08.2019   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Associate Professor (1,00)
01.09.2011–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Associate Professor (1,00)
01.01.2011–31.12.2012   
Swiss Federal Laboratories for Materials Science and Technology (EMPA), postdoc
01.09.2009–31.08.2011   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Assistant (1,00)
2004–2009   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Metals Processing, Assistant (1,00)
2002–2004   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Researcher (0,75)
2000–2002   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Engineer (0,50)
 
 
Education
2002–2008   
Tallinn University of Technology, doctoral study, Mechanical Engineering
2001–2002   
Tallinn University of Technology, master study, Production Engineering.
1997–2001   
Tallinn University of Technology, bachelor study, Production Engineering.
 
 
R&D related managerial and administrative work
2017−2019   
Board member, Department of Mechanical and Industrial Engineering
2014−2016   
Board member, Faculty of Mechanical Engineering, Tallinn University of Technology
2009−2010   
Member of council, department of Materials engineering, Tallinn University of Technology
2009−2009   
Head of Laboratory of Tribology
2007−2009   
Board member, Estonian Society of Mechanical Engineering
2002−2015   
Member of Estonian Materials associtaion
 
 
Additional information
Resposible teaching fellow for:
Bachelor studies
MTX0010 Material engineering 12 ECTS
MTM0120 Material and process selection 6 ECTS
MTM0170 Material and process selection (ENG) 6 ECTS
MTM0010 Engineering materials 6 ECTS
MXX0070 Material research methods and testing 9 ECTS
MTM0070 Materials engineering 6 ECTS (EST)
MTX0020 Metals and Engineering Ceramics 6 ECTS
Master studies
MTM0140 Material studies 3 ECTS
EMM0010 Materials engineering II 6 ECTS

E-course creator and developer:
Bachelor studies
MTX0010 Material engineering 12 ECTS
MTM0120 Material and process selection 6 ECTS
MTM0170 Material and process selection (ENG) 6 ECTS
MTM0010 Engineering materials 6 ECTS
MXX0070 Material research methods and testing 9 ECTS
MTM0070 Materials engineering 6 ECTS (EST)
MTX0020 Metals and Engineering Ceramics 6 ECTS
Master studies
EMM0010 Materials engineering II 6 ECTS
Doctoral studies
MTX9110 Special Chapters of Materials Science 6 ECTS
EMM9010 High tech materials 6 ECTS

Teaching work recognition
2018 Teaching fellow of the year at Department of Mechanical Industrial Engineering
2016 Teaching fellow of the year at Faculty of mechanical engineering aasta õppejõud
2012 Teaching fellow of the year at Faculty of mechanical engineering aasta õppejõud

Supplementary training (lecturer):
2018 Found INNOVE "Material testing and engineering materials" 24 hours, responsible person. 4 hours lectures, 4 tundi practical work (organizer)
2018 Master class for mechanical engineer, 2 hours lectures.
2016 Magnetic MRO, 6 hours (organizer)
2016 Merko AS, 4 tundi
2014 Air Maintenece Estonia, 6 tundi (organizer)
2011 E-profiil AS, 4 tundi
2010 Keevitustehnoloogaid ja nende otstarbekad rakendused ettevõtetes, 2 tundi
2008 Teaching in-service and E-learing course "Mechanical Behaviour of Materials“ Founded by INNOVE project, 24 hours + e-study

Further professional activities:
2000-...Practical experince working as a test expert in Laboratory of mechanical testing and metrology of Tallinn University of Technology
2000-2010 Practical experience in field of non-destructive testing (Level 2) in the field of Visual, Liguid penetrant and Magnetic particle testing, Laboratory of mechanical testing and metrology of Tallinn University of Technology

Qualifications

Academic degrees
Mart Saarna, Doctor's Degree, 2008, (sup) Priit Kulu, Fatique Characteristics of PM Steels, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering.
Mart Saarna, Master's Degree, 2002, (sup) Priit Kulu, Raudtee rööpmestiku kontroll Tallinna Tehnikaülikooli Katsekoja mehaanikalaboris (Railway testing in Mechanical testing Laboratory of TTU), Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering Chair of Materials Science.
 
 
Honours & awards
0, Mart Saarna, Diploma Mechanical Engineer V (Dipl Mech Eng), 2004
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS CLASSIFICATION: T450 Metal technology, metallurgy, metal products
 
 

Projects in progress

Completed projects

Dissertations under supervision

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2021
Alao, P. F.; Marrot, L.; Burnard, M, D.; Lavrič, G.; Saarna, M.; Kers, J. (2021). Impact of Alkali and Silane Treatment on Hemp/PLA Composites’ Performance: from Micro to Macro Scale. Polymers, 13 (6), #851. DOI: 10.3390/polym13060851.
3.1.
2020
Kiitam, I.; Saarna, M.; Taklaja, P.; Tealane, M.; Palu, I. (2020). Electrical and Mechanical Properties of Service-aged Medium Voltage Porcelain Support Insulators. 2020 6th IEEE International Energy Conference (ENERGYCon): 2020 6th IEEE International Energy Conference (ENERGYCon), Gammarth, Tunis, Tuneesia, 28. sept - 1. okt 2020. IEEE, 702−706. DOI: 10.1109/ENERGYCon48941.2020.9236596.
1.1.
2019
Holovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, Renno (2019). Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites. International Journal of Refractory Metals and Hard Materials, 105087. DOI: 10.1016/j.ijrmhm.2019.105087.
3.1.
2017
Surzhenkov, A.; Viljus, M.; Simson, T.; Tarbe, R.; Saarna, M.; Casesnoves, F. (2017). Wear resistance and mechanisms of composite hardfacings at abrasive impact erosion wear. In: 6th International Conference on Fracture Fatigue and Wear 26–27 July 2017, Porto, Portugal (1−10). 6 th International Conference on Fracture Fracture and Wear FFW 2017 Porto, Portugal, 26‐27 July 2017. IOP Publishing Ltd. (Journal of Physics: Conference Series; 843). DOI: 10.1088/1742-6596/843/1/012060.
3.1.
2017
Saarna, M.; Lind, L.; Peetsalu, P.; Sergejev, F. (2017). Cyclic Loading of TiCN Coating by Vickers Indentation. In: D. Loca (Ed.). Engineering Materials and Tribology XXV (425−429). Baltmattrib 2016, Riia, 3-4 November. Trans Tech Publications Ltd : Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.425.
1.1.
2016
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Beilmann, J. (2016). Decarburisation Effect on Hardened Strip Steel Fastening Components. Materials Science, 22 (1), 148−152. DOI: 10.5755/j01.ms.22.1.7467.
1.1.
2016
Jaason, K; Peetsalu, P.; Kulu, P.; Saarna, M.; Beilmann, J. (2016). Predictive tools for the isothermal hardening of strip steel parts in molten salt. Proceedings of the Estonian Academy of Sciences, 65 (2), 152−158. DOI: 10.3176/proc.2016.2.04.
1.1.
2016
Sepper, S.; Peetsalu, P.; Kulu, P.; Saarna, M.; Mikli, V. (2016). The role of silicon in the hot dip galvanizing process. Proceedings of the Estonian Academy of Sciences, 65 (2), 159−165. DOI: 10.3176/proc.2016.2.11.
3.3.
2016
Kübarsepp, J.; Kulu, P.; Laansoo, A.; Karjust, K.; Saarna, M. (2016). Materjalitehnika seletav sõnaraamat:eesti-inglise-vene. Tallinna Tehnikaülikooli Kirjastus.
1.1.
2015
Kulu, P.; Tarbe, R.; Saarna, M.; Surzenkov, A.; Peetsalu, P.; Talviste, K. (2015). Wear resistance and selection of steels, hardmetals and hardfacings for abrasive wear conditions. International Journal of Microstructure and Materials Properties, 10 (2), 101−113. DOI: 10.1504/IJMMP.2015.068718.
3.1.
2015
Veinthal, R.; Peetsalu, P.; Saarna, M.; Sergejev, F. (2015). Punch lifetime in fine-blanking with optimum combination of mechanical properties. In: Proceedings - European Conference on Heat Treatment and 22st IFHTSE Congress (1−7). . Venice, Italy: Associazione Italiana di Metallurgia (AIM).
6.7.
2015
Taklaja, P.; Kiitam, I.; Peetsalu, P.; Saarna, M.; Kurissoo, L. (2015). Vananevate juhtmete füüsikalised omadused [The physical characteristics of aging overhead line conductors]. Tallinn: TTÜ elektroenergeetika instituut.
1.1.
2014
Kwon, H.; Saarna, M.; Yoon, S.; Weidenkaff, A.; Leparoux, M. (2014). Effect of milling time on dual-nanoparticulate-reinforced aluminum alloy matrix composite materials. Materials Science and Engineering A, 590, 338−345. DOI: 10.1016/j.msea.2013.10.046.
3.2.
2014
Kulu, P.; Surzhenkov, A.; Tarbe, R.; Viljus, M.; Saarna, M.; Tarraste, M. (2014). Hardfacings for Extreme Abrasive Wear Applications. Proceedings of the 28th International Conference on Surface Modification Technologies: 28th International Conference on Surface Modification Technologies, Tampere, Finland, June 16th–18th, 2014. Valardocs, 149−157.
3.2.
2014
Kulu, P.; Tarbe, R.; Saarna, M.; Surzenkov, A.; Peetsalu, P.; Viljus, M. (2014). Steels, hardmetals and hardfacings for abrasive wear applications. European Conference on Heat Treatment and 21st IFHTSE Congress, Munich, Germany, 12-15 May 2014. IFHTSE , 449−456.
3.2.
2014
Kulu, P.; Surzhenkov, A.; Tarbe, R.; Saarna, M.; Tarraste, M.; Viljus, M. (2014). Hardfacings for Extreme Wear Applications. In: T. S. Sudarshan, P. Vuoristo, H. Koivuluoto (Ed.). Proceedings of the XXVIII International Conference on Surface Modification Technologies (149−157). Valardocs.
3.4.
2014
Veinthal, R.; Peetsalu, P.; Saarna, M.; Talkop, A. (2014). Durability of Complex Shape Punch in Thick Sheet Metal Fine-blanking. Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress, May 12th-15th, Munich, Germany. Ed. H-W. Zoch, R. Schneider, T. Lübben. Munich, Germany: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V (AWT); www.awt-online.org, 399−406.
1.1.
2013
Kommel, L.; Kimmari, E.; Saarna, M.; Viljus, M. (2013). Processing and properties of bulk ultrafine-grained pure niobium. Journal of Materials Science, 48 (13), 4723−4729. DOI: 10.1007/s10853-013-7210-3.
3.1.
2013
Saarna, M.; Sergejev, F.; Gomon, J.K.; Kollo, L.; Leparoux, M. (2013). Surface Fatigue of Al-Metal Matrix Composites at Impact Loading. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (119−124). . Trans Tech Publications Ltd. (Key Engineering Materials; 527).
3.3.
2013
Kübarsepp, J.; Kulu, P.; Laansoo, A.; Karjust, K.; Saarna, M. (2013). Materjalitehnika seletav sõnaraamat. Eesti - inglise - vene. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2012
Surzhenkov, A.; Põdra, P.; Sergejev, F.; Saarna, M.; Adoberg, E.; Mikli, V.; Viljus, M.; Kulu, P. (2012). Comparative Study of the PVD Coatings on the Plasma Nitrided Steel. Materials Science, 18 (1), 40−44. DOI: 10.5755/j01.ms.18.1.1339.
1.2.
2012
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Mikli, V.; Lind, L.; Beilmann, J. (2012). Influence of Steel Austenitization to Part Quality in Continuous Austempering. Estonian Journal of Engineering, 18 (3), 221−231.
3.1.
2012
Sepper, S.; Peetsalu, P.; Mikli, V.; Saarna, M. (2012). The effect of substrate microstructure on morphology of zinc coatings. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 2: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Ed. Otto, T. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 717−722.
3.4.
2012
Sepper, S.; Peetsalu, P.; Saarna, M.; Kirs, V.; Mikli, V. (2012). High strength steel behaviour during hot dip galvanizing. Proceedings 20th IFHTSE: International Federation for Heat Treatment and Surface Engineering Congress, Beijing, China, October 23-25, 2012. Chinese Heat Treatment Society, 525−529.
6.2.
2012
Herranen, H.; Karjust, K.; Kers, J.; Krustok, J.; Kulu, P.; Käerdi, H.; Laansoo, A.; Lend, H.; Otto, T.; Põdra, P.; Riives, J.; Saarna, M.; Sergejev, F.; Tiidemann, T.; Veinthal, R. (tõlkijad) (2012). Mehhanotehnika ja metallide käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.7.
2012
Herranen, H.; Karjust, K.; Kers, J.; Krustok, J.; Kulu, P.; Käerdi, H.; Laansoo, A.; Lend, H.; Otto, T.; Põdra, P.; Riives, J.; Saarna, M.; Sergejev, F.; Tiidemann, T.; Veinthal, R. [tõlkijad] (2012). Mehaanikainseneri käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2011
Herranen, H.; Pabut, O.; Eerme, M.; Majak, J.; Pohlak, M.; Kers, J.; Saarna, M.; Allikas, G.; Aruniit, A. (2011). Design and Testing of Sandwich Structures with Different Core Materials. Journal of Materials Science of Kaunas University of Technology, 17 (4), 1−6.
1.1.
2011
Aruniit, A., Kers, J., Goljandin, D., Saarna, M., Tall, K., Majak, J., Herranen, H. (2011). Particulate Filled Composite Plastic Materials from Recycled Glass Fibre Reinforced Plastics. Materials Science, 17 (3), 276−281.
1.1.
2011
Sergejev, F.; Peetsalu, P.; Sivitski, A.; Saarna, M.; Adoberg, E.. (2011). Surface fatigue and wear of PVD coated punches during fine blanking operation. Engineering Failure Analysis, 18 (7), 1689−1697. DOI: 10.1016/j.engfailanal.2011.02.011.
1.2.
2011
Sepper, S.; Peetsalu, P.; Saarna, M. (2011). Methods to evaluate the appearance of hot dip galvanized coatings. Agronomy Research, 9, 229−236.
3.1.
2011
Kommel, L.; Mikli, V.; Traksmaa, R.; Saarna, M.; Pokartilov, A.; Pikker, S.; Kommel, I. (2011). Influence of the SPD Processing Feartures on the Nanostructure and Properties of a Pure Niobium. Nanomaterials by Severe Plastic Deformation: NanoSPD5, 2: 5th International Conference on Nanomaterials by Severe Plastic Deformation held in Nanjing, China on March 21-25, 2011. Ed. Jing Tao Wang, Roberto B. Figueiredo, Terence G. Langdon. Trans Tech-Scitec Publications Ltd, 785−790. (Materials Science Forum ; 667-669). DOI: 10.4028/www.scientific.net/MSF.667-669.785.
3.1.
2011
Laurmaa, V.; Kers, J.; Tall, K.; Mikli, V.; Goljandin, D.; Vilsaar, K.; Peetsalu, P.; Saarna, M.; Tarbe, R.; Zhang, L. (2011). Mechanical recycling of electronic wastes for materials recovery. In: Zhang, L.; Krumdick, G.K. (Ed.). Recycling of Electronic Waste II: Proceedings of the Second Symposium (3−10). . Hoboken, New Jersey, USA: John Wiley & Sons Ltd.
5.2.
2011
Kers, J.; Saarna, M.; Peetsalu, P.; Aruniit, A.; Majak, J.; Pohlak, M.; Herranen, H. (2011). Selection of parameters in adhesive bonding of composite structures. 20th International Baltic Conference, Materials Engineering 2011, Book of Abstracts: 20th International Baltic Conference, Materials Engineering, Kaunas, Lihtuania, October 27-28. Kaunas, Lithuania: Kaunas University of Technology Press, 53−53.
1.2.
2010
Kers, J.; Peetsalu, P.; Saarna, M.; Viikna, A.; Krumme, A.; Menind, A. (2010). Preliminary investigation into tensile characteristics of long flax fibre reinforced composite material. Agronomy Research, 8, 107−114.
3.1.
2010
Kulu, P.; Saarna, M.; Sergejev, F.; Gregor, A.; Surženkov, A. (2010). Selection of coating systems and processes for different wear conditions. Proceedings of 14th Nordic Symposium on Tribology, NORDTRIB 2010: 14th Nordic Symposium on Tribology, NORDTRIB 2010, 08.06 - 11.06.2010, Storforsen, Sweden. Lulea University of Technology, 1−8.
3.1.
2010
Kers, J; Goljandin, D.; Tall, K.; Aruniit, A.; Adoberg, E.; Saarna, M.; Majak, J. (2010). Modelling and Testing of the Properties of Recovered Composite Material. Proceedings of the Tenth International Conference on Computational Structures Technology: Tenth International Conference on Computational Structures Technology, Valencia- Spain, 14-17 September 2010. Ed. B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru, M.L. Romero. Civil-Comp Press, 1−12. DOI: 10.4203/ccp.93.81.
3.2.
2010
Kers, J.; Majak, J.; Goljandin, D.; Saarna, M.; Gregor, A.; Siinmaa, A.; Tall, K. (2010). DESIGN AND TESTING OF NEW COMPOSITE FROM RECYCLED GFRP. 14th European Conference on Composite Materials. Ed. Kollar, L.; Czigany, T.; Karger-Kocsis. Budapest University of Technology, 1−10.
3.2.
2010
Peetsalu, P.; Saarna, M.; Adoberg, E.; Kulper, E.; Lind, L.; Kulu, P. (2010). Evaluation of punch wear resistance during industrial test. Acta Metallurgica Slovaca Conference, 1: 14th International Symposium on Metallography, 28-30 April 2010, Starà Lesnà, Slovak Republic. , 105−110.
3.4.
2010
Kulu, P.; Saarna, M.; Sergejev, F.; Gregor, A.; Sivitski, A.; Müller, H. (2010). Surface Fatigue and Wear Resistance of Thin and Thick Hard Coatings. 18th Congress IFHTSE International Federation for Heat Treatment and Surface Engineering 18th Congress. Ed. Karlheinz Pohlmann; Nelson Guedes de Alcantara.
6.2.
2010
Kulu, P.; Saarna, M.; Tarbe, R.; Kers, J.; Veinthal, R (2010). Materjaliõpetuse praktikumide ja kodutööde juhendid. TTU Press.
1.2.
2009
Sivitski, A.; Gregor, A.; Saarna, M.; Kulu, P.; Sergejev, F. (2009). Properties and Performance of Hard Coatings on Tool Steels under Cyclic Indentation. Acta Mechanica Slovaca, 13 (4), 84−94.
1.2.
2009
Sivitski, A.; Gregor, A.; Saarna, M.; Kulu, P.; Sergejev, F. (2009). Application of the indentation method for cracking resistance evaluation of hard coatings on tool steels. Estonian Journal of Engineering, 15 (4), 309−317.
3.1.
2008
Saarna, M., Peetsalu, P. (2008). Effect of mean stress on fatigue strength of duplex steels in synthetic white water environment. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (531−536). . Tallinn: Tallinn University of Technology.
6.2.
2008
Laansoo, A.; Saarna, M. (koostajad) (2008). Materjalitehnika : tehnoloogiaprotsessid : laboratoorsete ja kodutööde juhendid. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2007
Kulu, P.; Veinthal, R.; Saarna, M.; Tarbe, R. (2007). Surface fatigue processes at impact wear of powder materials. Wear, 263, 463−471.
1.2.
2007
Peetsalu, P.; Saarna, M.; .Mikli, V.; Juurma, M. (2007). Computer Based Steel Microstructure Analysis Describing the Size and Distribution of Structure Phases. Acta Metallurgica Slovaca, 13, 91−95.
3.4.
2007
Peetsalu, P.; Saarna, M.; Mikli, V. (2007). Assesment of Non-metallic Inclusions in Sheet Metals by Computer Analysis. Proceedings of the Seventh Inernational Conference on Clean Steel: sevent international conference Clean Steel, Hungary 2007. Balatonfüred, Hungary: Hungarian Mining and Metallurgical society (OMBKE), 332−341.
1.2.
2006
Saarna, M. (2006). Fatigue of Duplex Steels in Synthetic White Water Environment. Powder Metallurgy Progress : Journal of Science and Technology of Particle Materials, 6 (3), 142−145.
1.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder metallurgical materials. Proceedings of the Estonian Academy of Sciences. Engineering, 12 (4), 377−387.
1.2.
2006
Laansoo, A.; Kübarsepp, J.; Saarna, M.; Klaasen, H. (2006). Internal Stresses in Diffusion Bonded Joints. Proceedings of the Lithuanian Academy of Sciences. Materials Science, 12 (2), 110−113.
1.3.
2006
Saarna, Mart (2006). Fatigue of duplex steels in corrosive environment. Tallinn : Tallinn University of Technology: TTY puuduv kirjastus, 289−293.
5.2.
2006
Kommel, L.; Hussainova, I.; Veinthal, R.; Saarna, M. (2006). Stability and damage of nanocrystalline copper at cyclic elastic-plastic deformation. Ultrafine Grained Materials - from Basics to Applications: UFG - 2006, September 25 - 27, 2006, Kloster Irsee, Germany. Germany, 3-17−3-19.
5.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder materials. Proceedings of 15th International Baltic Conference Engineering Materials & Tribology : BALTMATTRIB 2006: The 15th International Baltic Conference Engineering Materials & Tribology, BALTMATTRIB 2006, Tallinn, Estonia, 5-6 Oct. 2006. , 66−68.
15.03.2021

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 15 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
IUTIUT19-29 Mitmeastmeliselt struktureeritud keraamika-baasil komposiitmaterjalid kasutamiseks ekstreemtingimustes 01.01.201431.12.2019Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond; Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 1 770 000,00 EUR
PSGPSG526Arvutusmudel uudsete kokkupõrkekindlate laevakonstruktsioonide arendamiseks01.01.202031.03.2021Mihkel KõrgesaarTallinna Tehnikaülikool, Eesti Mereakadeemia104 500,00 EUR
2.1.LEMEE20006Auto ohutusvarustuse komponentide effektiivsem silelõikestantsimine ja funktsionaalne disain01.10.201931.12.2023Priidu PeetsaluTallinna Tehnikaülikool, Eesti Mereakadeemia210 000,00 EUR
MUUV313 (LT/05/B/F/PP-171014)Euroopa tasemel keevitusspetsialistide õppeprogrammide arendamine01.10.200530.09.2007Andres LaansooTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool22 743,98 EUR
MUUGERA219Faasi ekviliibriumi (tasakaalu) nihe nanoteralistes materjalides.01.09.201231.12.2013Lembit KommelTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool48 678,00 EUR
ETFETF7227Komposiitmaterjalide ja -pinnete kulumiskindluse modelleerimine01.01.200731.12.2009Renno VeinthalTallinna Tehnikaülikool, Mehaanikateaduskond23 382,46 EUR
SFSF0142505s03Kulumiskindlad materjalid ja kulumine01.01.200331.12.2007Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond668 100,42 EUR
MUUAR12134Kõrgtehnoloogiliste õhukeste pinnete rakendamine tööriistade kulumiskindluse tõstmisel.01.09.201230.06.2015Priidu PeetsaluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut855 012,84 EUR
SFSF0140091s08Kõvapinded ja pinnatehnika01.01.200831.12.2013Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond705 840,56 EUR
MUUV244Pulberkomposiitmaterjalide väsimustugevus agressiivses keskkonnas20.05.200430.09.2006Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool5 752,05 EUR
MUUF8104Rööbaste ekspluatatsioonikriteeriumid ja liitetehnoloogia01.10.200831.03.2009Jaan KersTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool11 116,92 EUR
ETFETF7889Tehnomaterjalide ja aurustussadestatud kõvapinnete väsimusmehaanika uurimine01.01.200931.12.2012Fjodor SergejevTallinna Tehnikaülikool, Mehaanikateaduskond59 080,21 EUR
MUUIN7081Täiendkoolitus ja e-õppe süsteemi väljaarendamine materjalitehnoloogidele ning kvaliteediinseneridele polümeer- ja komposiitmaterjalide valdkonnas01.01.200730.06.2008Andre GregorTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool112 862,92 EUR
MUULep15078Vananevate juhtmete füüsikalised omadused14.08.201521.12.2015Paul TaklajaTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja metroloogia katselaboratoorium; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektroenergeetika instituut, Kõrgepingetehnika õppetool20 000,00 EUR
MUULep16105Vananevate juhtmete füüsikalised omadused – II etapp06.09.201621.12.2017Paul TaklajaTallinna Tehnikaülikool, Energeetikateaduskond, Elektroenergeetika instituut, Kõrgepingetehnika õppetool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja metroloogia katselaboratoorium320 000,00 EUR