See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Eron Adoberg

https://etis.ee/CV/Eron_Adoberg/est
9.04.1981
+3725159432
eron.adoberg@taltech.ee

Teenistuskäik

Töökohad ja ametid
01.01.2019–...   
Tallinna Tehnikaülikool, PVD pinnakatete koordinaator (0,20)
01.05.2016–...   
Vasar Instrument AS, tööriista konstruktor (0,80)
01.01.2017–28.10.2017   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Teadur (0,50)
01.02.2009–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Teadur (0,50)
01.04.2005–30.11.2006   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, insener (0,50)
01.01.2004–31.12.2012   
Vasar Instrument AS, konstruktor
 
 
Haridustee
Kõrgem

Kvalifikatsioon

Teaduskraadid
Eron Adoberg, magistrikraad, 2008, (juh) Vitali Podgurski, Õhukeste kõvapinnete kulumiskindlus, Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut.
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.13. Mehhanotehnika, automaatika, tööstustehnoloogia; TÄPSUSTUS: PVD õhukesed kõvapinded
 
 
Lisainfo
Tehnikateaduste bakalaureus (BSc)
Tallinna Tehnikaülikool, 2004

Lõppenud projektid

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2018
Antonov, M.; Afshari, H.; Baronins, J.; Adoberg, E.; Raadik, T.; Hussainova, I. (2018). The effect of temperature and sliding speed on friction and wear of Si3N4, Al2O3, and ZrO2 balls tested against AlCrN PVD coating. Tribology International, 118, 500−514. DOI: 10.1016/j.triboint.2017.05.035.
3.1.
2018
Lille, H.; Ryabchikov, A.; Kõo, J.; Adoberg, E.; Mikli, V.; Kübarsepp, J.; Peetsalu, P. (2018). Evaluation of residual stresses in PVD coatings by means of tubular substrate length variation. In: M. Seefeldt (Ed.). Materials Research Proceedings / MRP (131−136). Materials Research Forum LLC. (Residual Stresses 2018 – ECRS-10). DOI: 10.21741/9781945291890-21.
1.1.
2017
Sarjas, H.; Surzhenkov, A.; Juhani, K.; Antonov, M.; Adoberg, E.; Kulu, P.; Viljus, M.; Traksmaa, R.; Matikainen, V.; Vuoristo, P. (2017). Abrasive-erosive wear of thermally sprayed coatings from experimental and commercial Cr3C2-based powders. Journal of Thermal Spray Technology, 26 (8), 2020−2029. DOI: 10.1007/s11666-017-0638-2.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Adoberg, Eron; Kurissoo, Liisa; Peetsalu, Priidu; Lind, Liina (2017). Evaluation of residual stresses in PVD coatings by means of the curvature method of plate. In: Dagnija Loca (Ed.). Engineering Materials and Tribology XXV (404−408). Trans Tech Publications Ltd. (Key Engineering Materials; 721).10.4028/www.scientific.net/KEM.721.404.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Adoberg, Eron; Lind, Liina; Kurissoo, Liisa; Peetsalu, Priidu (2017). Evaluation of residual stresses in PVD coatings by means of strip substrate length variation and curvature method of plate substrate. In: Regita Bendikienė, Kazimieras Juzėnas (Ed.). Materials Engineering 2017 (212−218). Trans Tech Publications Ltd. ( Solid State Phenomena).10.4028/www.scientific.net/SSP.267.212.
1.1.
2016
Johansson, D.; Leemet, T.; Allas, J.; Madissoo, M.; Adoberg, E.; Schultheiss, F. (2016). Tool life in stainless steel - influence of varying tool coatings on Colding's tool life equation. Proceedings of the Estonian Academy of Sciences, 65 (2), 172−176. DOI: 10.3176/proc.2016.2.13.
3.1.
2014
Kupchenko, L.; Tali, R.; Adoberg, E.; Mikli, V.; Podgursky, V. (2014). Evolution of TiN Coating Surface Roughness During Physical Vapor Deposition on High Speed Steel Substrate. In: D. Loca (Ed.). Engineering Materials & Tribology XXII (67−70).. Trans Tech Publications Ltd. (Key Engineering Materials; 604).
3.2.
2014
Leemet, T.; Allas, J.; Adoberg, E. (2014). Tool wear investigations by direct and indirect methods in end milling. 9th International DAAAM Baltic Conference "INDUSTRIAL ENGINEERING - 24-26 April 2014, Tallinn, Estonia.
1.1.
2013
Antonov, M.; Hussainova, I.; Adoberg, E. (2013). EFFECT OF LOADING SYSTEM INERTIA ON TRIBOLOGICAL BEHAVIOUR OF CERAMIC-CERAMIC, CERAMIC-METAL AND METAL-METAL DRY SLIDING CONTACTS. Tribology International, 65, 207−214. DOI: 10.1016/j.triboint.2013.03.025.
3.1.
2013
Surzhenkov, A.; Adoberg, E.; Põdra, P.; Sergejev, F.; Mere, A.; Viljus, M.; Mikli, V.; Antonov, M.; Kulu, P. (2013). Impact and Sliding Wear Properties of Single Layer, Multilayer and Nanocomposite Physical Vapour Deposited (PVD) Coatings on the Plasma Nitrided Low-Alloy 42CrMo4 Steel. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (223−228). . Trans Tech Publications Ltd. (Key Engineering Materials,; 527).
1.1.
2012
Surzhenkov, A.; Põdra, P.; Sergejev, F.; Saarna, M.; Adoberg, E.; Mikli, V.; Viljus, M.; Kulu, P. (2012). Comparative Study of the PVD Coatings on the Plasma Nitrided Steel. Materials Science, 18 (1), 40−44. DOI: 10.5755/j01.ms.18.1.1339.
1.2.
2012
Adoberg, E.; Podgurski, V.; Peetsalu, P.; Lind, L.; Mikli, V.; Hvizdos, P.; Kulu, P. (2012). The Effect of Surface Pre-Treatment and Coating Post-Treatment to the Properties of TiN Coating. Estonian Journal of Engineering, 18 (3), 185−192.
1.2.
2012
Tšinjan, A.; Klaasen, HeH.nrich; Kübarsepp, J.; Adoberg, E.; Sergejev, F.;Talkop, A. (2012). Wear performance of PVD coated steels. Estonian Journal of Engineering, 18 (3), 202−210. DOI: 10.3176/eng.2012.3.05.
1.2.
2012
Veinthal, R.; Kulu, P.; Žikin, A.; Sarjas, H.; Antonov, M.; Podgurski, V.; Adoberg, E. (2012). Coatings and surface engineering. Industry oriented research. Estonian Journal of Engineering, 18 (3), 176−184. DOI: 10.3176/eng.2012.3.02.
1.2.
2012
Lind, L.; Adoberg, E.; Aarik, L.; Kulu, P.; Veinthal, R.; Aal, A. A. (2012). Tribological properties of PVD coatings with lubricating films. Estonian Journal of Engineering, 18 (3), 193−201.
1.1.
2011
Podgursky, V.; Adoberg, E.; Surženkov, A.; Kimmari, E.; Viljus, M.; Mikli, V.; Hartelt, M.; Wäsche, R.; Šíma, M.; Kulu, P. (2011). Dependence of the friction coefficient on roughness parameters during early stage fretting of (Al,Ti)N coated surfaces. Wear, 271, 853−858. DOI: 10.1016/j.wear.2011.03.006.
1.1.
2011
Sergejev, F.; Peetsalu, P.; Sivitski, A.; Saarna, M.; Adoberg, E.. (2011). Surface fatigue and wear of PVD coated punches during fine blanking operation. Engineering Failure Analysis, 18 (7), 1689−1697. DOI: 10.1016/j.engfailanal.2011.02.011.
3.1.
2011
Tsinjan, A.; Klaasen, H.; Kübarsepp, J.; Adoberg, E.; Talkop, A.; Viljus, M. (2011). Performance of tool steels strengthened by PVD coatings in adhesion and cyclic loading wear conditions. In: Proceedings of EURO PM 2011 Congress & Exhibition, October 9-12, 2011, Barcelona, Spain (455−461). Shrewsbury, UK: European Powder Metallurgy Association.
3.2.
2011
Antonov, M.; Adoberg, E.; Hussainova, I. (2011). Effect of loading system rigidity and inertia on friction coefficient and wear rate of ceramic-ceramic sliding contacts. In: Richard Leach, Liam Blunt (Ed.). Proceedings of the 13th International Conference on Metrology and Properties of Engineering Surfaces (151−155). . UK: National Physical Laboratory, Queen's Printer and Controller of HMSO.
3.2.
2011
Antonov, M., Adoberg, E.; Hussainova, I.; Goljandin, D.; Zikin, A. (2011). Effect of tribosystem and inertia on run-in behavior of PVD coatings. Proceedings of 3d European Conference on Tribology and 4th Vienna International Conference on Nano-Technology, Austria: ECOTRIB 2011: 3d European Conference on Tribology and 4th Vienna International Conference on Nano-Technology, June 7 - 9, 2011, Vienna, Austria.. Ed. F. Franek, W.J. Bartz, A. Pauschitz. Austria: The Austrian Tribology Society, 159−164.
3.4.
2011
Kers, J.; Goljandin, D.; Adoberg, E.; Laurmaa, V.; Križan, P. (2011). Mechanical recycling of electronic wastes by high-energy disintegrator mills. TOP 2011 - Engineering of Environment Protection: TOP 2011 - Engineering of Environment Protection, Casta - Papiernicka, Slovakia, 14-16 June, 2011. Ed. Mirošlav Horvat. Nakladadatelstvo Slovak University of Techmology in Bratislava 2011, 131−136.
1.1.
2010
Podgursky, V.; Nisumaa, R.; Adoberg, E.; Surzhenkov, A.; Sivitski, A.; Kulu, P. (2010). Comparative study of surface roughness and tribological behavior during running-in period of hard coatings deposited by lateral rotating cathode arc. Wear, 268, 751−755. DOI: 10.1016/j.wear.2009.11.016.
3.1.
2010
Lind, L.; Peetsalu, P.; Põdra, P.; Adoberg, E.; Veinthal, R.; Kulu, P. (2010). Description of Punch Wear Mechanism During Fine Blanking Process. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, 2: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn: Tallinn University of Technology Press, 504−509.
3.1.
2010
Kers, J; Goljandin, D.; Tall, K.; Aruniit, A.; Adoberg, E.; Saarna, M.; Majak, J. (2010). Modelling and Testing of the Properties of Recovered Composite Material. Proceedings of the Tenth International Conference on Computational Structures Technology: Tenth International Conference on Computational Structures Technology, Valencia- Spain, 14-17 September 2010. Ed. B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru, M.L. Romero. Civil-Comp Press, 1−12. DOI: 10.4203/ccp.93.81.
3.1.
2010
Klaasen, H.; Kübarsepp, J.; Tšinjan, A.; Adoberg, E.; Vainola, V. (2010). Performance of tool steels strengthened by PVD coatings. Proceedings of International Powder Metallurgy Congress and Exhibition, Florence, Italy, 10-14 October 2010, 3: EURO PM2010, Florence, Italy, 10th-14th October 2010. European Powder Metallurgy Association, -.
3.2.
2010
Peetsalu, P.; Saarna, M.; Adoberg, E.; Kulper, E.; Lind, L.; Kulu, P. (2010). Evaluation of punch wear resistance during industrial test. Acta Metallurgica Slovaca Conference, 1: 14th International Symposium on Metallography, 28-30 April 2010, Starà Lesnà, Slovak Republic. , 105−110.
5.2.
2010
Adoberg, E.; Surženkov, A.; Podgurski, V.; Peetsalu, P.; Kulu, P. (2010). Pre- and posttreatment effect to the surface properties of thin hard coatings. Proceedings of the XIX-th International Baltic Conference "Materials Engineering & Balttrib-2010": 19th International Conference "Materials Engineering & Balttrib-2010", Riga, Latvia, 28-29 October 2010. Ed. J. Grabis, J. Krastins. Riga, Latvia: Riga Technical University, 44.
5.2.
2010
Surzhenkov, A.; Podgurski, V.; Viljus, M.; Adoberg, E.; Nanits, M.; Kulu, P.; Veinthal, R. (2010). Influence of drag finishing to dry sliding wear behaviour of PVD nanocomposite NaCo(R) coating during running-in. Proceedings of the XIX-th International Baltic Conference "Materials Engineering & Balttrib-2010": 19th International Baltic Conference "Materials Engineering & Balttrib-2010". Ed. J. Grabis, J. Krastins. Riga Technical University, 26.
5.2.
2009
Surzhenkov, A.; Adoberg, E.; Podgurski, V.; Veinthal, R.; Kulu, P.; Gregor, A.; Viljus, M. (2009). Influence of surface roughness on the tribological behaviour of the PVD coatings. BALTMATTRIB-2009, Tallinn, Eesti, 22.-23. oktoober 2009. Tallinn, Eesti, 38.
1.2.
2008
Podgursky, V.; Nisumaa, R; Gregor, A.; Adoberg, E.; Kulu, P. (2008). Roughness of TiN and Nanocomposite nc-Ti1-xAlxN/α-Si3N4 Surface Evaluated by means of AFM. Latvijas Kimijas Žurnals (Latvian Journal of Chemistry), 1, 62−66.
13.02.2021

Eron Adoberg

https://etis.ee/CV/Eron_Adoberg/eng
9.04.1981
+3725159432
eron.adoberg@taltech.ee

Career

Institutions and positions
01.01.2019–...   
Tallinn University of Technology , PVD coating coordinator (0,20)
01.05.2016–...   
Vasar Instrument AS, tool designer (0,80)
01.01.2017–28.10.2017   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Researcher (0,50)
01.02.2009–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Researcher (0,50)
01.04.2005–30.11.2006   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Engineer (0,50)
01.01.2004–31.12.2012   
Vasar Instrument AS, tool designer
 
 
Education
Higher

Qualifications

Academic degrees
Eron Adoberg, Master's Degree, 2008, (sup) Vitali Podgurski, Õhukeste kõvapinnete kulumiskindlus (Wear resistance of thin hard coatings), Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering.
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.13. Mechanical Engineering, Automation Technology and Manufacturing Technology; SPECIFICATION: PVD hard coatings
 
 
Additional information
Bachelor of Science in Engineering (BSc)
Tallinn University of Technology, 2004

Completed projects

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2018
Antonov, M.; Afshari, H.; Baronins, J.; Adoberg, E.; Raadik, T.; Hussainova, I. (2018). The effect of temperature and sliding speed on friction and wear of Si3N4, Al2O3, and ZrO2 balls tested against AlCrN PVD coating. Tribology International, 118, 500−514. DOI: 10.1016/j.triboint.2017.05.035.
3.1.
2018
Lille, H.; Ryabchikov, A.; Kõo, J.; Adoberg, E.; Mikli, V.; Kübarsepp, J.; Peetsalu, P. (2018). Evaluation of residual stresses in PVD coatings by means of tubular substrate length variation. In: M. Seefeldt (Ed.). Materials Research Proceedings / MRP (131−136). Materials Research Forum LLC. (Residual Stresses 2018 – ECRS-10). DOI: 10.21741/9781945291890-21.
1.1.
2017
Sarjas, H.; Surzhenkov, A.; Juhani, K.; Antonov, M.; Adoberg, E.; Kulu, P.; Viljus, M.; Traksmaa, R.; Matikainen, V.; Vuoristo, P. (2017). Abrasive-erosive wear of thermally sprayed coatings from experimental and commercial Cr3C2-based powders. Journal of Thermal Spray Technology, 26 (8), 2020−2029. DOI: 10.1007/s11666-017-0638-2.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Adoberg, Eron; Kurissoo, Liisa; Peetsalu, Priidu; Lind, Liina (2017). Evaluation of residual stresses in PVD coatings by means of the curvature method of plate. In: Dagnija Loca (Ed.). Engineering Materials and Tribology XXV (404−408). Trans Tech Publications Ltd. (Key Engineering Materials; 721).10.4028/www.scientific.net/KEM.721.404.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Adoberg, Eron; Lind, Liina; Kurissoo, Liisa; Peetsalu, Priidu (2017). Evaluation of residual stresses in PVD coatings by means of strip substrate length variation and curvature method of plate substrate. In: Regita Bendikienė, Kazimieras Juzėnas (Ed.). Materials Engineering 2017 (212−218). Trans Tech Publications Ltd. ( Solid State Phenomena).10.4028/www.scientific.net/SSP.267.212.
1.1.
2016
Johansson, D.; Leemet, T.; Allas, J.; Madissoo, M.; Adoberg, E.; Schultheiss, F. (2016). Tool life in stainless steel - influence of varying tool coatings on Colding's tool life equation. Proceedings of the Estonian Academy of Sciences, 65 (2), 172−176. DOI: 10.3176/proc.2016.2.13.
3.1.
2014
Kupchenko, L.; Tali, R.; Adoberg, E.; Mikli, V.; Podgursky, V. (2014). Evolution of TiN Coating Surface Roughness During Physical Vapor Deposition on High Speed Steel Substrate. In: D. Loca (Ed.). Engineering Materials & Tribology XXII (67−70).. Trans Tech Publications Ltd. (Key Engineering Materials; 604).
3.2.
2014
Leemet, T.; Allas, J.; Adoberg, E. (2014). Tool wear investigations by direct and indirect methods in end milling. 9th International DAAAM Baltic Conference "INDUSTRIAL ENGINEERING - 24-26 April 2014, Tallinn, Estonia.
1.1.
2013
Antonov, M.; Hussainova, I.; Adoberg, E. (2013). EFFECT OF LOADING SYSTEM INERTIA ON TRIBOLOGICAL BEHAVIOUR OF CERAMIC-CERAMIC, CERAMIC-METAL AND METAL-METAL DRY SLIDING CONTACTS. Tribology International, 65, 207−214. DOI: 10.1016/j.triboint.2013.03.025.
3.1.
2013
Surzhenkov, A.; Adoberg, E.; Põdra, P.; Sergejev, F.; Mere, A.; Viljus, M.; Mikli, V.; Antonov, M.; Kulu, P. (2013). Impact and Sliding Wear Properties of Single Layer, Multilayer and Nanocomposite Physical Vapour Deposited (PVD) Coatings on the Plasma Nitrided Low-Alloy 42CrMo4 Steel. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (223−228). . Trans Tech Publications Ltd. (Key Engineering Materials,; 527).
1.1.
2012
Surzhenkov, A.; Põdra, P.; Sergejev, F.; Saarna, M.; Adoberg, E.; Mikli, V.; Viljus, M.; Kulu, P. (2012). Comparative Study of the PVD Coatings on the Plasma Nitrided Steel. Materials Science, 18 (1), 40−44. DOI: 10.5755/j01.ms.18.1.1339.
1.2.
2012
Adoberg, E.; Podgurski, V.; Peetsalu, P.; Lind, L.; Mikli, V.; Hvizdos, P.; Kulu, P. (2012). The Effect of Surface Pre-Treatment and Coating Post-Treatment to the Properties of TiN Coating. Estonian Journal of Engineering, 18 (3), 185−192.
1.2.
2012
Tšinjan, A.; Klaasen, HeH.nrich; Kübarsepp, J.; Adoberg, E.; Sergejev, F.;Talkop, A. (2012). Wear performance of PVD coated steels. Estonian Journal of Engineering, 18 (3), 202−210. DOI: 10.3176/eng.2012.3.05.
1.2.
2012
Veinthal, R.; Kulu, P.; Žikin, A.; Sarjas, H.; Antonov, M.; Podgurski, V.; Adoberg, E. (2012). Coatings and surface engineering. Industry oriented research. Estonian Journal of Engineering, 18 (3), 176−184. DOI: 10.3176/eng.2012.3.02.
1.2.
2012
Lind, L.; Adoberg, E.; Aarik, L.; Kulu, P.; Veinthal, R.; Aal, A. A. (2012). Tribological properties of PVD coatings with lubricating films. Estonian Journal of Engineering, 18 (3), 193−201.
1.1.
2011
Podgursky, V.; Adoberg, E.; Surženkov, A.; Kimmari, E.; Viljus, M.; Mikli, V.; Hartelt, M.; Wäsche, R.; Šíma, M.; Kulu, P. (2011). Dependence of the friction coefficient on roughness parameters during early stage fretting of (Al,Ti)N coated surfaces. Wear, 271, 853−858. DOI: 10.1016/j.wear.2011.03.006.
1.1.
2011
Sergejev, F.; Peetsalu, P.; Sivitski, A.; Saarna, M.; Adoberg, E.. (2011). Surface fatigue and wear of PVD coated punches during fine blanking operation. Engineering Failure Analysis, 18 (7), 1689−1697. DOI: 10.1016/j.engfailanal.2011.02.011.
3.1.
2011
Tsinjan, A.; Klaasen, H.; Kübarsepp, J.; Adoberg, E.; Talkop, A.; Viljus, M. (2011). Performance of tool steels strengthened by PVD coatings in adhesion and cyclic loading wear conditions. In: Proceedings of EURO PM 2011 Congress & Exhibition, October 9-12, 2011, Barcelona, Spain (455−461). Shrewsbury, UK: European Powder Metallurgy Association.
3.2.
2011
Antonov, M.; Adoberg, E.; Hussainova, I. (2011). Effect of loading system rigidity and inertia on friction coefficient and wear rate of ceramic-ceramic sliding contacts. In: Richard Leach, Liam Blunt (Ed.). Proceedings of the 13th International Conference on Metrology and Properties of Engineering Surfaces (151−155). . UK: National Physical Laboratory, Queen's Printer and Controller of HMSO.
3.2.
2011
Antonov, M., Adoberg, E.; Hussainova, I.; Goljandin, D.; Zikin, A. (2011). Effect of tribosystem and inertia on run-in behavior of PVD coatings. Proceedings of 3d European Conference on Tribology and 4th Vienna International Conference on Nano-Technology, Austria: ECOTRIB 2011: 3d European Conference on Tribology and 4th Vienna International Conference on Nano-Technology, June 7 - 9, 2011, Vienna, Austria.. Ed. F. Franek, W.J. Bartz, A. Pauschitz. Austria: The Austrian Tribology Society, 159−164.
3.4.
2011
Kers, J.; Goljandin, D.; Adoberg, E.; Laurmaa, V.; Križan, P. (2011). Mechanical recycling of electronic wastes by high-energy disintegrator mills. TOP 2011 - Engineering of Environment Protection: TOP 2011 - Engineering of Environment Protection, Casta - Papiernicka, Slovakia, 14-16 June, 2011. Ed. Mirošlav Horvat. Nakladadatelstvo Slovak University of Techmology in Bratislava 2011, 131−136.
1.1.
2010
Podgursky, V.; Nisumaa, R.; Adoberg, E.; Surzhenkov, A.; Sivitski, A.; Kulu, P. (2010). Comparative study of surface roughness and tribological behavior during running-in period of hard coatings deposited by lateral rotating cathode arc. Wear, 268, 751−755. DOI: 10.1016/j.wear.2009.11.016.
3.1.
2010
Lind, L.; Peetsalu, P.; Põdra, P.; Adoberg, E.; Veinthal, R.; Kulu, P. (2010). Description of Punch Wear Mechanism During Fine Blanking Process. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, 2: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn: Tallinn University of Technology Press, 504−509.
3.1.
2010
Kers, J; Goljandin, D.; Tall, K.; Aruniit, A.; Adoberg, E.; Saarna, M.; Majak, J. (2010). Modelling and Testing of the Properties of Recovered Composite Material. Proceedings of the Tenth International Conference on Computational Structures Technology: Tenth International Conference on Computational Structures Technology, Valencia- Spain, 14-17 September 2010. Ed. B.H.V. Topping, J.M. Adam, F.J. Pallarés, R. Bru, M.L. Romero. Civil-Comp Press, 1−12. DOI: 10.4203/ccp.93.81.
3.1.
2010
Klaasen, H.; Kübarsepp, J.; Tšinjan, A.; Adoberg, E.; Vainola, V. (2010). Performance of tool steels strengthened by PVD coatings. Proceedings of International Powder Metallurgy Congress and Exhibition, Florence, Italy, 10-14 October 2010, 3: EURO PM2010, Florence, Italy, 10th-14th October 2010. European Powder Metallurgy Association, -.
3.2.
2010
Peetsalu, P.; Saarna, M.; Adoberg, E.; Kulper, E.; Lind, L.; Kulu, P. (2010). Evaluation of punch wear resistance during industrial test. Acta Metallurgica Slovaca Conference, 1: 14th International Symposium on Metallography, 28-30 April 2010, Starà Lesnà, Slovak Republic. , 105−110.
5.2.
2010
Adoberg, E.; Surženkov, A.; Podgurski, V.; Peetsalu, P.; Kulu, P. (2010). Pre- and posttreatment effect to the surface properties of thin hard coatings. Proceedings of the XIX-th International Baltic Conference "Materials Engineering & Balttrib-2010": 19th International Conference "Materials Engineering & Balttrib-2010", Riga, Latvia, 28-29 October 2010. Ed. J. Grabis, J. Krastins. Riga, Latvia: Riga Technical University, 44.
5.2.
2010
Surzhenkov, A.; Podgurski, V.; Viljus, M.; Adoberg, E.; Nanits, M.; Kulu, P.; Veinthal, R. (2010). Influence of drag finishing to dry sliding wear behaviour of PVD nanocomposite NaCo(R) coating during running-in. Proceedings of the XIX-th International Baltic Conference "Materials Engineering & Balttrib-2010": 19th International Baltic Conference "Materials Engineering & Balttrib-2010". Ed. J. Grabis, J. Krastins. Riga Technical University, 26.
5.2.
2009
Surzhenkov, A.; Adoberg, E.; Podgurski, V.; Veinthal, R.; Kulu, P.; Gregor, A.; Viljus, M. (2009). Influence of surface roughness on the tribological behaviour of the PVD coatings. BALTMATTRIB-2009, Tallinn, Eesti, 22.-23. oktoober 2009. Tallinn, Eesti, 38.
1.2.
2008
Podgursky, V.; Nisumaa, R; Gregor, A.; Adoberg, E.; Kulu, P. (2008). Roughness of TiN and Nanocomposite nc-Ti1-xAlxN/α-Si3N4 Surface Evaluated by means of AFM. Latvijas Kimijas Žurnals (Latvian Journal of Chemistry), 1, 62−66.
13.02.2021

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 11 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
ETFETF7442Aurustussadestatud kõvapinnete triboloogia omaduste optimiseerimine01.01.200831.12.2010Vitali PodgurskiTallinna Tehnikaülikool, Mehaanikateaduskond24 394,83 EUR
MUUF9068Isemäärivad süsiniknanokiudude (CNF) tribopinded01.05.200930.04.2011Vitali PodgurskiTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool123 800,12 EUR
SFSF0142505s03Kulumiskindlad materjalid ja kulumine01.01.200331.12.2007Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond668 100,42 EUR
MUU517FKõrgtehnoloogilised kõvapinded tööriistamajanduses01.03.200530.11.2006Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool177 399,56 EUR
MUUAR12134Kõrgtehnoloogiliste õhukeste pinnete rakendamine tööriistade kulumiskindluse tõstmisel.01.09.201230.06.2015Priidu PeetsaluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut855 012,84 EUR
SFSF0140091s08Kõvapinded ja pinnatehnika01.01.200831.12.2013Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond705 840,56 EUR
ETFETF5881Nanopulbrid ja nanostruktuursed pinded01.01.200431.12.2006Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond33 511,51 EUR
MUUF11022PECVD tehnoloogia spetsiifiliste lisanditega teemantpinnete sadestamiseks01.03.201131.05.2011Vitali PodgurskiTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool11 110,00 EUR
2.1.LEP17119Puidulõiketerade pindamine27.03.201712.06.2017Eron AdobergTallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 4 970,00 EUR
ETFETF8696Teemantilaadse süsiniku pinde omaduste hindamine ning optimeerimine01.01.201131.12.2013Vitali PodgurskiTallinna Tehnikaülikool, Mehaanikateaduskond33 120,00 EUR
ETFETF7705UUS KOMPOSIITPLASTJÄÄTMETE TAASKASUTUSTEHNOLOOGIA 01.01.200831.12.2010Jaan KersTallinna Tehnikaülikool, Mehaanikateaduskond31 066,43 EUR