See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Priit Kulu

https://etis.ee/CV/Priit_Kulu/est
13.02.1945
51 01983
priit.kulu@ttu.ee
1. Õppetöö 2010/11 kuni 2014/2015
MTM0010 Tehnomaterjalid – 16 loeng.: 2014/15 sügis – 85 tudengit
MTM0120 Materjali- ja tehnoloogia valik – 16 loeng.: 2014/15 sügis – 56 tudengit
MTM0070 Materjalitehnika – 24 loeng.: kuni 2013/14 kevad – 70 tudengit
MTM0150 Termotöötlus ja pinnatehnoloogia – 24 loeng.: 2014/15 kevad – 55 tudengit
KYF0190 Application of Materials – 20 loeng: 2014/15 kevad – 17 tudengit
MTX9010 Kõrgtehnoloogiamaterjalid – 8 loeng. + 8 harj.: 2014/15 kevad – 11 tudengit
MTX9020 Materjaliõpetuse eripeatükid – 16 loeng. + 8 harj.: 2014/15 kevad – 8 tudengit
MXX9010 Uurimistöö metoodika ja eksperimenditehnika – 8 loeng. + 4 harj.: 2014/15 kevad – 19 tudengit
2. Õppemetoodiline töö
• Mehaanikainseneri käsiraamat, 2012, 492 lk
• Materjalitehnika seletav sõnaraamat, 2013, 438 lk
• Materjalitehnika õpik, 2015:
I Tehnomaterjalid, 337 lk;
II Konstruktsioonimaterjalide tehnoloogia, 508 lk
3. Organisatoorne töö
• Doktoriõppekava MAPD juht
• Kõrgkooliõpikute programmi tehnikateaduste ekspertkomisjoni esimees

Teenistuskäik

Töökohad ja ametid
01.01.2017–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Emeriitprofessor (1,00)
Ettevõtlusalane tegevus: Väikefirma "KERMIS" direktor (1988 - 1991), väikefirmade "METKO" ja "KATE" nõukogu esimees (1991 - 1993)
01.01.2017–31.12.2019   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Vanemteadur (0,60)
01.09.2015–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Vanemteadur (0,60)
01.09.2015–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Emeriitprofessor
01.09.2012–2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, dekaani nõunik (0,20)
2010–2012   
Tallinna Tehnikaülikool, Mehaanikateaduskond, prodekaan
2005–2010   
Tallinna Tehnikaülikool, Mehaanikateaduskond, dekaan
2005–2015   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, metalliõpetuse professor (1,00)
1992–2005   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, direktor
1992–2005   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, materjaliõpetuse professor, õppetooli juhataja
1983–1992   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia kateeder, professor (1,00)
01.01.1983–31.12.1992   
TTÜ metallide tehnoloogia kateeder, professor, juhataja
01.01.1981–31.12.1993   
Teadusalane stažeerimine: Teraste ja Sulamite Instituut, Moskva (1981), Kiievi Polütehniline Instituut (1986), Kalifornia Lutheri Ülikool (1992), Saksa Ülikoolid (1992, 1993)
01.01.1980–31.12.1983   
TPI metallide tehnoloogia kateeder, dotsent
01.01.1978–31.12.1980   
TPI metallide tehnoloogia kateeder, vanemõpetaja
01.01.1970–31.12.1978   
Pulbermetallurgia tootmisharu laboratooriumi juhataja
01.01.1968–31.12.1970   
TPI metallide tehnoloogia kateeder, assistent
 
 
Haridustee
Tallinna Polütehniline Instituut (TPI) 1968, masinaehituse tehnoloogia
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2015−...   
ETAG loodus- ja tehnikateaduste ekspertkomisjon, ekspert
2014−...   
Institutsionaalne uurimistoetus IUT19-29 Mitmeastmeliselt struktureeritud keraamika-baasil komposiitmaterjalid kasutamiseks ekstreemtingimustes, põhitäitja
2014−...   
Mehaanikainseneride kutsekomisjon, esimees
2013−...   
Ajakirja Int. Journal of Microstructure and Materials Properties (IJMMP), rahvusvalise kolleegiumi liige
2012−...   
Ajakirja Estonian Journal of Engineering külalistoimetaja
2009−...   
Mehhanotehnika doktoriõppe kava, juht
2007−...   
Ajakirja "Inseneeria", kolleegiumi liige
2006−...   
Eesti Mehaanikainseneride Liit, esimees, juhatuse liige
2005−...   
EAS ekspert
2004−...   
Ajakirja "Powder Metallurgy Progress", rahvusvahelise kolleegiumi liige
1997−...   
Balti Materjaliühingute Assotsiatsioon, asepresident
1996−...   
ASM International, liige
2012−2014   
Eesti Inseneride Kutsenõukogu, kutsestandardite töögrupi liige
2011−2016   
Rahvusvaheline Termotöötluse ja Pinnatehnoloogia Föderatsiooni(IFHTSE), assamblee liige
2008−2013   
Sihtteema 0140091s08 Kõvapinded ja pinnatehnika, teemajuht
2008−2012   
Sihtasutus TTÜ Materjalitöötlustehnoloogiate Siirdekeskus, nõukogu liige
2005−2012   
ETF Tehnikateaduste ekspertkomisjon, materjaliteaduse ekspert
2005−2010   
TTÜ Mehaanikateaduskonna õppekomisjon, esimees, liige
2005−2016   
TTÜ mehaanikateaduskonna nõukogu, esimees, liige
2005−2016   
Euroopa Materjaliühingute Föderatsioon (FEMS), peaassamblee liige
2005−2008   
TTÜ Tribomaterjalide ja triboloogia tippkeskus, juht
2004−2007   
Eesti Inseneride Kutsenõukogu, liige
2004−2013   
Eesti Materjalitehnika Ühing, juhatuse liige
1992−2005   
Mehaanikateaduskonna nõukogu, liige

Kvalifikatsioon

Teaduskraadid
Priit Kulu, doktorikraad, 1989, (juh) I. Fedortshenko, The Principles of Creation of Abrasive Erosion Wear Resistant Powder Materials and Coatings (Abrasiiverosioonkulumiskindlate pulbermaterjalide ja -pinnete loomise põhimõtted), Minsk, Valgevene Pulbermetallurgia Teadustootmiskoondis.
 
 
Teaduspreemiad ja tunnustused
2012, Priit Kulu, Slovakkia Teaduste Akadeemia Aurela Stodolu teenetemedal
2010, Priit Kulu, Eesti Vabariigi Valgeristi IV klassi teenetemärk
2008, Priit Kulu, TTÜ aastateadur
2005, Priit Kulu, Eesti volitatud insener
2001, Priit Kulu, Euroinsener
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; TÄPSUSTUS: Pinded ja pinnatehnoloogia
 
 
Lisainfo
Tehnikateaduste doktor
Valgevene Pulbermetallurgia Teadustootmiskoondis, 1989
Tehnikateaduste kandidaat
Ukraina Teaduste Akadeemia Materjaliteaduse instituut, 1972

Lõppenud projektid

Juhendamisel väitekirjad

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2020
Surzhenkov, A.; Vallikivi, A.; Mikli, V.; Viljus, M.; Vilgo, T.; Kulu, P. (2020). Wear resistant self-fluxing alloy based TiC-NiMo and Cr2C3-Ni hardmetal particles reinforced composite coatings. Tehnicki vjesnik - Technical Gazette, xx−xx [ilmumas].
1.1.
2019
Bendikiene, R.; Ciuplys, A.; Jankus, S. M.; Surzhenkov. A.; Tkachivskyi, D.; Juhani, K.; Viljus, M.; Traksmaa, R.; Antonov, M.; Kulu, P. (2019). Study of submerged and plasma arc welded composite hardfacings with a novel Cr3C2–Ni reinforcement. Proceedings of the Estonian Academy of Sciences, 68 (2), 150−157. DOI: 10.3176/proc.2019.2.06.
2.1.
2019
Kulu, P. (2019). Pronksiajast läbi rauaaja tänapäeva. Raud. Vask. Tallinn: TTÜ Kirjastus.
3.1.
2019
Tkachivskyi, D.; Juhani, K.; Surženkov, A.; Kulu, P.; Viljus, M.; Traksmaa, R.; Jankauskas, V.; Leišys, R. (2019). Production of Thermal Spray Cr3C2-Ni Powders by Mechanically Activated Synthesis. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (31−36). Trans Tech Publications Ltd.. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.31.
3.1.
2019
Kulu, P.; Goljandin, D.; Külaviir, J.; Hain, T.; Kivisto, M. (2019). Recycling of Niobium Slag by Disintegrator Milling. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (97−102). Trans Tech Publications Ltd.. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.97.
1.1.
2018
Simson, T.; Kulu, P.; Surženkov, A.; Ciuplys, A.; Viljus, M.; Zaldarys, G. (2018). Comparison of plasma transferred arc and submerged arc welded abrasive wear resistant composite hardfacings. Materials Science, 24 (2), 172−176. DOI: 10.5755/j01.ms.24.2.19121.
1.2.
2018
Saage, Ragnar; Peets, Jüri; Kulu, Priit; Peetsalu, Priidu; Viljus, Mart (2018). Metallographic investigation of iron blooms and bars from the smithy site of Käku, Estonia. Fennoscandia Archaeologica, XXXIV, 46−58.
1.1.
2017
Kulu, P.; Surženkov, A.; Tarbe, R.; Goljandin, D.; Tarraste, M.; Viljus, M.; Traksmaa, R.; Simson, T. (2017). Wear Resistance of Sintered Composite Hardfacings under Different Abrasive Wear Conditions. Materials Science, 23 (3), 249−253. DOI: 10.5755/j01.ms.23.3.17640.
1.1.
2017
Sarjas, H.; Surzhenkov, A.; Juhani, K.; Antonov, M.; Adoberg, E.; Kulu, P.; Viljus, M.; Traksmaa, R.; Matikainen, V.; Vuoristo, P. (2017). Abrasive-erosive wear of thermally sprayed coatings from experimental and commercial Cr3C2-based powders. Journal of Thermal Spray Technology, 26 (8), 2020−2029. DOI: 10.1007/s11666-017-0638-2.
3.1.
2017
Simson, T.; Kulu, P.; Surženkov, A.; Goljandin, D.; Tarbe, R.; Tarraste, M.; Viljus, M. (2017). Optimization of Structure of Hardmetal Reinforced Iron-Based PM Hardfacings for Abrasive Wear Conditions. In: D. Loca (Ed.). Engineering Materials and Tribology XXV (351−355). Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.351.
3.1.
2017
Surzhenkov, A.; Baroninš, J.; Viljus, M.; Traksmaa, R.; Kulu, P. (2017). Sliding Wear of Composite Stainless Steel Hardfacing under Room and Elevated Temperature. In: R. Bendikiene, K. Juzėnas (Ed.). Materials Engineering 2017 (195−200). Trans Tech Publications Ltd. (Solid State Phenomena; 267). DOI: 10.4028/www.scientific.net/SSP.267.195.
3.1.
2017
Kulu, P.; Casesnoves, F.; Simson, T.; Tarbe, R. (2017). Prediction of Abrasive Erosion Impact Wear of Composite Hardfacings. In: R. Bendikienė and K. Juzėnas (Ed.). Materials Engineering 2017 (201−206). Trans Tech Publications Ltd. (Solid State Phenomena; 267).10.4028/www.scientific.net/SSP.267.201.
6.4.
2017
Kulu, P.; Pirso, J.; Roosme, S.; Tapper, M. (2017). Metallide tehnoloogia kateeder 1947-1992. Materjalitehnika insitituut 1992-2015. Tallinn: Tallinna Tehnikaülikool.
1.1.
2016
Simson, T.; Kulu, P.; Surženkov, A.; Tarbe, R.; Viljus, M.; Tarraste, M.; Goljandin, D. (2016). Optimization of reinforcement content of PM hardfacing in abrasive wear conditions. Proceedings of the Estonian Academy of Sciences, 65 (2), 90−96. DOI: 10.3176/proc.2016.2.03.
1.1.
2016
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Beilmann, J. (2016). Decarburisation Effect on Hardened Strip Steel Fastening Components. Materials Science, 22 (1), 148−152. DOI: 10.5755/j01.ms.22.1.7467.
1.1.
2016
Jaason, K; Peetsalu, P.; Kulu, P.; Saarna, M.; Beilmann, J. (2016). Predictive tools for the isothermal hardening of strip steel parts in molten salt. Proceedings of the Estonian Academy of Sciences, 65 (2), 152−158. DOI: 10.3176/proc.2016.2.04.
3.4.
2016
Surzhenkov, A.; Tarbe, R.; Tarraste, M.; Simson, T.; Viljus, M.; Kulu, P. (2016). Optimization of hardmetal reinforcement content in Fe-based hardfacings for abrasive-impact wear conditions. In: Proceedings of the 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications (xx−xx). Asociace pro tepelné zpracování kovů.
1.1.
2015
Surzhenkov, A.; Goljandin, D.; Traksmaa, R.; Viljus, M.; Talviste, K.; Aruniit, A.; Latokartano, J.; Kulu, P. (2015). High Temperature Erosion Wear of Cermet Particles Reinforced Self-Fluxing Alloy HVOF Sprayed Coatings. Materials Science, 21 (3), 386−390. DOI: 10.5755/j01.ms.21.3.7617.
2.4.
2015
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Veinthal, R. (2015). Materjalitehnika : õpik kõrgkoolidele. II, Konstruktsioonimaterjalide tehnologia. Tallinn: TTÜ kirjastus.
2.4.
2015
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Veinthal, R. (2015). Materjalitehnika : õpik kõrgkoolidele. I, Tehnomaterjalid. Tallinn: TTÜ kirjastus.
3.2.
2015
Kulu, P.; Surženkov, A.; Tarbe, R.; Simson, T. (2015). Abrasive impact wear resistance of hardfacings. Proceedings - European Conference on Heat Treatment and 22st IFHTSE Congress: European Conference on Heat Treatment and 22st IFHTSE Congress, Venice, Italy, 20-22 May 2015. Itaalia: Associazione Italiana di Metallurgia, 1−9.
1.1.
2014
Podgursky, V.; Hantschel, T.; Bogatov, A.; Kimmari, E.; Antonov, M.; Viljus, M.; Mikli, V.; Tsigkourakos, M.; Vandervorst, W.; Buijnsters, J.; Raadik, A.; Kulu, P. (2014). Rippling on Wear Scar Surfaces of Nanocrystalline Diamond Films After Reciprocating Sliding Against Ceramic Balls. Tribology Letters, 55 (3), 493−501. DOI: 10.1007/s11249-014-0379-z.
3.1.
2014
Surzhenkov, Andrei; Adoberg, Eron; Antonov, Maksim; Sergejev, Fjodor; Mikli, Valdek; Viljus, Mart; Latokartano, Jyrki; Kulu, Priit (2014). Influence of Laser Hardening to the Sliding Wear Resistance of the PVD (Al,Ti)N-G and nACo® Coatings. Key Engineering Materials, 604, 28−31. DOI: 10.4028/www.scientific.net/KEM.604.28.
3.1.
2014
Tarbe, R.; Kulu, P.; Zikin, A.; Surzhenkov, A. (2014). Abrasive Wear Resistance of HVOF Sprayed and PTA-welded Hardmetal Hard Phase Reinforced Metal-Matrix Based Coatings. In: D. Loca (Ed.). Engineering Materials & Tribology XXII (3−7). . Trans Tech Publications Ltd. (Key Engineering Materials; 604).
3.1.
2014
Bogatov, A.; Podgursky, V.; Raadik, T.; Kamjula, A. R.; Hantschel, T.; Tsigkourakos, M.; Kulu, P. (2014). Investigation of morphology changes on nanocrystalline diamond film surfaces during reciprocating sliding against Si3N4 balls. D. Loca. Engineering Materials & Tribology XXII (126−129). . Trans Tech Publications Ltd. (Key Engineering Materials; 604).
3.2.
2014
Sarjas, H.; Kulu, P.; Juhani, K.; Vuoristo, P. (2014). Novel WC-Co Spray Powders and HVOF Sprayed Coatings on their Bases. Proceedings of the 28th International Conference on Surface Modification Technologies: 28th International Conference on Surface Modification Technologies, Tampere, Finland, June 16th–18th, 2014. Valardocs, 35−42.
3.2.
2014
Kulu, P.; Surzhenkov, A.; Tarbe, R.; Viljus, M.; Saarna, M.; Tarraste, M. (2014). Hardfacings for Extreme Abrasive Wear Applications. Proceedings of the 28th International Conference on Surface Modification Technologies: 28th International Conference on Surface Modification Technologies, Tampere, Finland, June 16th–18th, 2014. Valardocs, 149−157.
1.1.
2013
Hvizdoš, P.; Besterci, M.; Kulu, P.; Kavačkaj, T. (2013). Tribological Characteristics of Copper Based Composites with Al2O3 Particles at Various Temperatures. High Temperature Materials and Processes, 32 (5), 437−442.10.1515/htmp-2012-0161.
1.1.
2013
Kimmari, E.; Podgursky, V.; Simunin, M.; Adoberg, E.; Surženkov, A.; Viljus, M.; Hartelt, M.; Wäsche, R.; Sildos, I.; Kulu, P. (2013). Tribological behavior of carbon nanofibers deposited on hard nanocomposite (nc-Ti1-xAlxN)/(a-Si3N4) coating. Surface and Coatings Technology, 225, 21−25. DOI: 10.1016/j.surfcoat.2013.03.011.
3.1.
2013
Hvizdoš, P.; Kulu, P.; Besterci, M. (2013). Tribological Parameters of Copper-Alumina Composite. In: Hussainova, I. (_EditorsAbbr). Engineering Materials and Tribology (191−196).. Trans Tech Publications Ltd. (Key Engineering Materials; 527).
3.1.
2013
Surzhenkov, A.; Adoberg, E.; Põdra, P.; Sergejev, F.; Mere, A.; Viljus, M.; Mikli, V.; Antonov, M.; Kulu, P. (2013). Impact and Sliding Wear Properties of Single Layer, Multilayer and Nanocomposite Physical Vapour Deposited (PVD) Coatings on the Plasma Nitrided Low-Alloy 42CrMo4 Steel. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (223−228). . Trans Tech Publications Ltd. (Key Engineering Materials,; 527).
3.1.
2013
Podgursky, V.; Bogatov, A.; Freund, M.; Kulu, P. (2013). Influence of surface morphology on the tribological behavior of diamond- like carbon coating. Accepted for publication. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (83−91). . Trans Tech Publications Ltd. (Key Engineering Materials; 527).
3.1.
2013
Zikin, A.; Hussainova, I.; Katsich, C.; Kulu, P.; Goljandin, D. (2013). Wear behavior of recycled hard particle reinforced NiCrBSi hardfacings deposited by plasma transferred arc (PTA) process. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (179−184). Trans Tech Publications Ltd. (Key Engineering Materials; 527). DOI: 10.4028/www.scientific.net/KEM.527.179.
3.1.
2013
Käerdi, H.; Goljandin, D.; Kulu, P.; Sarjas, H.; Mikli, V. (2013). Characterization of Mechanically Milled Cermet Powders Produced by Disintegrator Technology. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (148−153). . Trans Tech Publications Ltd. (Key Engineering Materials; 527).
3.1.
2013
Kulu, P.; Tarbe, R.; Žikin, A.; Sarjas, H.; Surženkov, A. (2013). Abrasive Wear Resistance of Recycled Hardmetal Reinforced Thick coating. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (185−190). Trans Tech Publications Ltd. (Key Engineering Materials; 527). DOI: 10.4028/www.scientific.net/KEM.527.185.
3.2.
2013
Surzhenkov, A.; Antonov, M.; Mikli, V.; Latokartano, J.; Vilgo, T.; Kulu, P. (2013). Sliding wear of HVOF sprayed self-fluxing alloy matrix cermet particles reinforced composite coatings. In: J. Padgurskas, R. Rukuiža, R. Krevaitis, V. Jankauskas (Ed.). Proceedings of the VII International Scientific Conference BALTTRIB'2013 (62−66). . Kaunas, Lithuania: ASU Leidybos centras.
3.2.
2013
Kulu, P.; Žikin, A.; Surženkov, A.; Tarbe, R. (2013). Structure and properties of HVOF-sprayed and PTA-welded cermet hard phase reinforced Fe-matrix based coatings. 2nd Mediterranean Conference & New Challenges on Heat Treatment and Surface Engineering, Dubrovnik-Cavtat, Crovatia, 11-14 June 2013. Zagreb : Croatian Society for Heat Treatment and Surface Engineering, 37−44.
3.3.
2013
Kübarsepp, J.; Kulu, P.; Laansoo, A.; Karjust, K.; Saarna, M. (2013). Materjalitehnika seletav sõnaraamat. Eesti - inglise - vene. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.6.
2013
Kübarsepp, J.; Kulu, P. (2013). Terminoloogiaarendus tehnikavaldkonnas. Sirp (2−3).. Sihtasutus Kultuurileht.
1.1.
2012
Goljandin, D.; Sarjas, H.; Kulu, P.; Käerdi, H.; Mikli, V. (2012). Metal-Matrix Hardmetal/Cermet Reinforced Composite Powders for Thermal Spray. Materials Science, 18 (1), 84−89. DOI: 10.5755/j01.ms.18.1.1348.
1.1.
2012
Sarjas, H.; Goljandin, D.; Kulu, P.; Mikli, V.; Surženkov, A.; Vuoristo, P. (2012). Wear resistant thermal sprayed composite coatings based on iron self-fluxing alloy and recycled cermet powders. Materials Science, 18 (1), 34−39.
1.1.
2012
Surzhenkov, A.; Põdra, P.; Sergejev, F.; Saarna, M.; Adoberg, E.; Mikli, V.; Viljus, M.; Kulu, P. (2012). Comparative Study of the PVD Coatings on the Plasma Nitrided Steel. Materials Science, 18 (1), 40−44. DOI: 10.5755/j01.ms.18.1.1339.
1.1.
2012
Zikin, A.; Ilo, S.; Kulu, P.; Hussainova, I.; Katsich, C.; Badisch, E. (2012). Plasma Transferred ARC (PTA) Hardfacing of Recycled Hardmetal Reinforced Nickel-matrix Surface Composites. Materials Science, 18 (1), 12−17.10.5755/j01.ms.18.1.1334.
1.2.
2012
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Mikli, V.; Lind, L.; Beilmann, J. (2012). Influence of Steel Austenitization to Part Quality in Continuous Austempering. Estonian Journal of Engineering, 18 (3), 221−231.
1.2.
2012
Adoberg, E.; Podgurski, V.; Peetsalu, P.; Lind, L.; Mikli, V.; Hvizdos, P.; Kulu, P. (2012). The Effect of Surface Pre-Treatment and Coating Post-Treatment to the Properties of TiN Coating. Estonian Journal of Engineering, 18 (3), 185−192.
1.2.
2012
Veinthal, R.; Kulu, P.; Žikin, A.; Sarjas, H.; Antonov, M.; Podgurski, V.; Adoberg, E. (2012). Coatings and surface engineering. Industry oriented research. Estonian Journal of Engineering, 18 (3), 176−184. DOI: 10.3176/eng.2012.3.02.
1.2.
2012
Lind, L.; Adoberg, E.; Aarik, L.; Kulu, P.; Veinthal, R.; Aal, A. A. (2012). Tribological properties of PVD coatings with lubricating films. Estonian Journal of Engineering, 18 (3), 193−201.
1.2.
2012
Besterci, M.; Velgosova, O.; Ivan, J.; Kvačkaj, T.; Kulu, P. (2012). Fracture mechanism of dispersion-strengthened Cu-Al2O3 nanosystem. Acta Metallurgica Slovaca, 18, 76−81.
1.2.
2012
Zikin, A.; Hussainova, I.; Winkelmann, H.; Kulu, P.; Badisch, E. (2012). Plasma transferred arc hardfacings reinforced by chromium carbide based cermet particles. International Heat Treatment and Surface Engineering, 6 (2), 88−92. DOI: 10.1179/1749514811Z.0000000004.
3.1.
2012
Surzhenkov, Andrei; Adoberg, Eron; Põdra, Priit; Sergejev, Fjodor; Mere, Arvo; Viljus, Mart; Mikli, Valdek; Antonov, Maksim; Kulu, Priit (2012). Impact and Sliding Wear Properties of Single Layer, Multilayer and Nanocomposite Physical Vapour Deposited (PVD) Coatings on the Plasma Nitrided Low-Alloy 42CrMo4 Steel. Key Engineering Materials, 527, 223−228. DOI: 10.4028/www.scientific.net/KEM.527.223.
3.4.
2012
Kulu, P.; Tarbe, R.; Žikin, A.; Sarjas, H.; Surženkov, A. (2012). Abrasive wear resistance of recycled hardmetal reinforced thick coatings. Proceedings 20th IFHTSE: International Federation for Heat Treatment and Surface Engineering Congress, Beijing, China, October 23-25, 2012. Chinese Heat Treatment Society, 541−546.
3.4.
2012
Surzhenkov, A.; Vallikivi, A.; Mikli, V.; Viljus, M.; Vilgo, T.; Kulu, P. (2012). Wear Resistant Self-fluxing Alloy Based TiC-NiMo and Cr2C3-Ni Hardmetal Particles Reinforced Composite Coatings. In: S. Hloch, D. Kozak (Ed.). The Proceedings of the 2nd International Scientific Conference MANUFACTURING ENGINEERING & MANAGEMENT 2012 (33−36). . Udulibri.
4.2.
2012
(2012). Mehaanikainseneri käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.2.
2012
Herranen, H.; Karjust, K.; Kers, J.; Krustok, J.; Kulu, P.; Käerdi, H.; Laansoo, A.; Lend, H.; Otto, T.; Põdra, P.; Riives, J.; Saarna, M.; Sergejev, F.; Tiidemann, T.; Veinthal, R. (tõlkijad) (2012). Mehhanotehnika ja metallide käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.7.
2012
Herranen, H.; Karjust, K.; Kers, J.; Krustok, J.; Kulu, P.; Käerdi, H.; Laansoo, A.; Lend, H.; Otto, T.; Põdra, P.; Riives, J.; Saarna, M.; Sergejev, F.; Tiidemann, T.; Veinthal, R. [tõlkijad] (2012). Mehaanikainseneri käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2011
Hvizdoš, P.; Besterci, M.; Kulu, P. (2011). Tribological Characteristics of Micro- and Nano-Composites Cu-Al2O3 at Room and Elevated Temperatures. High Temperature Materials and Processes, 30 (6), 573−577.
1.1.
2011
Velgosova, O.; Besterci, M.; Kovac, L.; Kulu, P.; Huang, S.-J. (2011). Effect of strain rate, volume fraction of particles and temperature on fracture mechanism in Al-Al4C3 systems. Kovove Materialy-Metallic Materials, 49 (5), 361−367. DOI: 10.4149/km_2011_5_361.
1.1.
2011
Podgursky, V.; Adoberg, E.; Surženkov, A.; Kimmari, E.; Viljus, M.; Mikli, V.; Hartelt, M.; Wäsche, R.; Šíma, M.; Kulu, P. (2011). Dependence of the friction coefficient on roughness parameters during early stage fretting of (Al,Ti)N coated surfaces. Wear, 271, 853−858. DOI: 10.1016/j.wear.2011.03.006.
1.1.
2011
Veinthal, R.; Kulu, P.; Käerdi, H. (2011). Microstructural aspects of abrasive wear of composite powder materials and coatings. International Journal of Materials and Product Technology, 40, 92−119. DOI: 10.1504/IJMPT.2011.037208.
3.1.
2011
Lille, Harri; Kõo, Jakub; Gregor, Andre; Ryabchikov, Alexander; Sergejev, Fjodor; Traksmaa, Rainer; Kulu, Priit (2011). Comparison of curvature and X-Ray methods for measuring of residual stresses in hard PVD coatings. Materials Science Forum, 681, 455−460. DOI: 10.4028/www.scientific.net/MSF.681.455.
3.2.
2011
Antonov, M.; Hussainova, I.; Kers, J.; Kulu, P.; Kübarsepp, J.; Veinthal, R. (2011). Advanced multifunctional materials and their applications. In: Research in Estonia. Present and Future. (146−167). . Estonian Academy of Sciences.
3.2.
2011
Zikin, A.; Hussainova, I.; Winkelmann, H.; Kulu, P.; Badish, E. (2011). Plasma transferred arc hardfacings reinforced by chromium carbide-based cermet particles. Proceedings of the Heat Treatment and Surface Engineering 19th Congress: Heat Treatment and Surface Engineering 19th Congress, Glasgow, Scotland, 17 – 20 October, 2011. UK: Int. Federation for Heat treatment and Surface Engineering, 1−5.
1.1.
2010
Podgursky, V.; Nisumaa, R.; Adoberg, E.; Surzhenkov, A.; Sivitski, A.; Kulu, P. (2010). Comparative study of surface roughness and tribological behavior during running-in period of hard coatings deposited by lateral rotating cathode arc. Wear, 268, 751−755. DOI: 10.1016/j.wear.2009.11.016.
1.2.
2010
Kers, J.; Kulu, P.; Aruniit, A.; Laurmaa, V.; Križan, P.; Šooš, L.; Kask, Ü. (2010). Determination of physical, mechanical and burning characteristics of polymeric waste material briquettes. Estonian Journal of Engineering, 4, 307−316. DOI: 10.3176/eng.2010.4.06.
3.1.
2010
Surzhenkov, A.; Kulu, P.; Viljus, M.; Vallikivi, A.; Latokartano, J. (2010). Microstructure and Wear Resistance of the Laser Hardened PM Tool Steel Vanadis 6. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, 2: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. R. Küttner. Tallinn University of Technology Press, 486−491.
3.1.
2010
Kulu, P.; Saarna, M.; Sergejev, F.; Gregor, A.; Surženkov, A. (2010). Selection of coating systems and processes for different wear conditions. Proceedings of 14th Nordic Symposium on Tribology, NORDTRIB 2010: 14th Nordic Symposium on Tribology, NORDTRIB 2010, 08.06 - 11.06.2010, Storforsen, Sweden. Lulea University of Technology, 1−8.
3.1.
2010
Lind, L.; Peetsalu, P.; Põdra, P.; Adoberg, E.; Veinthal, R.; Kulu, P. (2010). Description of Punch Wear Mechanism During Fine Blanking Process. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, 2: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn: Tallinn University of Technology Press, 504−509.
3.2.
2010
Peetsalu, P.; Saarna, M.; Adoberg, E.; Kulper, E.; Lind, L.; Kulu, P. (2010). Evaluation of punch wear resistance during industrial test. Acta Metallurgica Slovaca Conference, 1: 14th International Symposium on Metallography, 28-30 April 2010, Starà Lesnà, Slovak Republic. , 105−110.
3.2.
2010
Kulu, P.; Kers, J.; Kask, Ü.; Šooš, L.; Križan, P.; Letko, M. (2010). Thermal Analysis of Refuse-Derived Fuel Briquetees Manufactured by Different Technologies. Proceedings of the full papers of 13th international conference on Mechanical Engineering 2010: 13th international conference on Mechanical Engineering 2010, Bratislava, October 2010. Ed. Janco, R. Bratislava , Slovakia, October 2010: Slovak University of Technology, P31−P36.
3.4.
2010
Kulu, P.; Saarna, M.; Sergejev, F.; Gregor, A.; Sivitski, A.; Müller, H. (2010). Surface Fatigue and Wear Resistance of Thin and Thick Hard Coatings. 18th Congress IFHTSE International Federation for Heat Treatment and Surface Engineering 18th Congress. Ed. Karlheinz Pohlmann; Nelson Guedes de Alcantara.
5.2.
2010
Adoberg, E.; Surženkov, A.; Podgurski, V.; Peetsalu, P.; Kulu, P. (2010). Pre- and posttreatment effect to the surface properties of thin hard coatings. Proceedings of the XIX-th International Baltic Conference "Materials Engineering & Balttrib-2010": 19th International Conference "Materials Engineering & Balttrib-2010", Riga, Latvia, 28-29 October 2010. Ed. J. Grabis, J. Krastins. Riga, Latvia: Riga Technical University, 44.
5.2.
2010
Goljandin, Dmitri; Sarjas, Heikki; Kulu, Priit; Surženkov, Andrei; Mikli, Valdek; Käerdi, Helmo (2010). Composite powders based on iron self-fluxing alloy and recycled cermet powders for thermal spray. Proceedings of the XIX-th International Baltic Conference "Materials Engineering and Balttrib-2010": 19th International Baltic Conference "Materials Engineering and Balttrib-2010", Riga, Latvia, 28-29th October 2010. Ed. J. Grabis, J. Krastins. Riga, Latvia: Riga Technical University, 40.
5.2.
2010
Surzhenkov, A.; Podgurski, V.; Viljus, M.; Adoberg, E.; Nanits, M.; Kulu, P.; Veinthal, R. (2010). Influence of drag finishing to dry sliding wear behaviour of PVD nanocomposite NaCo(R) coating during running-in. Proceedings of the XIX-th International Baltic Conference "Materials Engineering & Balttrib-2010": 19th International Baltic Conference "Materials Engineering & Balttrib-2010". Ed. J. Grabis, J. Krastins. Riga Technical University, 26.
6.2.
2010
Kulu, P.; Saarna, M.; Tarbe, R.; Kers, J.; Veinthal, R (2010). Materjaliõpetuse praktikumide ja kodutööde juhendid. TTU Press.
1.1.
2009
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H. (2009). Characterization And Prediction Of Abrasive Wear Of Powder Composite Materials. Wear, 267 (12), 2216−2222. DOI: 10.1016/j.wear.2009.08.034.
1.1.
2009
Antonov, M.; Hussainova, I.; Kulu, P.; Sergejev, F.; Gregor, A. (2009). Assessment of gradient and nanogradient PVD coatings behaviour under erosive, abrasive and impact wear conditions. Wear, 267, 898−906. DOI: 10.1016/j.wear.2008.12.045.
1.1.
2009
Kulu, P.; Tarbe, R.; Käerdi, H.; Goljandin, D. (2009). Abrasivity and grindability study of mineral ores. Wear, 267 (11), 1832−1837. DOI: 10.1016/j.wear.2009.02.025.
1.1.
2009
Veinthal, R.; Tarbe, R.; Kulu, P.; Käerdi, H. (2009). Abrasive erosive wear of powder steels and cermets. Wear, 267 (11), 1838−1844. DOI: 10.1016/j.wear.2009.02.021.
1.2.
2009
Sivitski, A.; Gregor, A.; Saarna, M.; Kulu, P.; Sergejev, F. (2009). Application of the indentation method for cracking resistance evaluation of hard coatings on tool steels. Estonian Journal of Engineering, 15 (4), 309−317.
1.2.
2009
Dahms, S.; Kulu, P.; Veinthal, R.; Basler, U.; Sändig, S. (2009). Substance-to-substance joining of quartz glass. Estonian Journal of Engineering, 15 (2), 131−142. DOI: 10.3176/eng.2009.2.06.
1.2.
2009
Sivitski, A.; Gregor, A.; Saarna, M.; Kulu, P.; Sergejev, F. (2009). Properties and Performance of Hard Coatings on Tool Steels under Cyclic Indentation. Acta Mechanica Slovaca, 13 (4), 84−94.
1.2.
2009
Besterci, M.; Velgosovà, O., Ivan, J.; Hvizdoš, P.; Kvačkaj, T.; Kulu, P. (2009). Fracture mechanism of Al-Al4C3 nanomaterials studied by "in-situ tensile test in SEM". Kovove Materialy-Metallic Materials, 47 (4), 221−225.
1.2.
2009
Surzenkov, A.; Kulu, P.; Tarbe, R.; Mikli, V.; Sarjas, H.; Latokartano, J. (2009). Wear resistance of laser remelted thermally sprayed coatings. Estonian Journal of Engineering, 15 (4), 318−328.
1.2.
2009
Besterci, M.; Velgosovà, O., Ivan, J.; Hvizdoš, P.; Kvačkaj, T.; Kulu, P. (2009). In situ tensile testing in SEM of Al-Al4C3. Estonian Journal of Engineering, 15 (4), 247−254.
5.2.
2009
Gregor, A.; Lille, H.; Kõo, J.; Sergejev, F.; Traksmaa, R.; Sivitski, A.; Kulu, P. (2009). Evaluation of mechanical properties and residual stresses of hard PVD coatings. 18th International Baltic Conference Engineering Materials & Tribology BaltMatTrib-2009, October 22-23, 2009, Tallinn, Estonia : Abstracts. Tallinn: Tallinn University of Technology, 34.
5.2.
2009
Surzhenkov, A. Latokartano, J.; Vuoristo, P.; Kulu, P.; Viljus, M.; Vallikivi, A. (2009). The study of the laser hardening parameters on the structure and the mechanical properties of the PM steel Vanadis 6. BALTMATTRIB-2009, Tallinn, Eesti, 22.-23. oktoober 2009. Tallinn, Eesti, 67.
5.2.
2009
Surzhenkov, A.; Adoberg, E.; Podgurski, V.; Veinthal, R.; Kulu, P.; Gregor, A.; Viljus, M. (2009). Influence of surface roughness on the tribological behaviour of the PVD coatings. BALTMATTRIB-2009, Tallinn, Eesti, 22.-23. oktoober 2009. Tallinn, Eesti, 38.
5.2.
2009
Kulu, P.; Surzhenkov, A.; Gregor, A.; Tarbe, R.; Mikli, V.; Latokartano, J.; Müller, H. (2009). Wear properties of duplex treated surfaces. 1st Mediterranean Conference on Heat Treatment and Surface Engineering, Sharm El-Sheikh, Egypt, Dec. 1-3, 2009.
1.2.
2005
Podgursky, V.; Torp, B.; Traksmaa, R.; Veinthal, R.; Viljus, M.; Coddet, O.; Morstein, M.; Gregor, A.; Kulu, P. (2005). Investigation of (Ti, Al)N Based Coatings Grown by Physical Vapor Deposition. Materials Science, 11 (4), 352−355.
2.2.
2005
Kleis, I.; Kulu, P. (2005). Solid Particle Erosion. Occurence, prognostigation and controll. TUT Press.
1.1.
2002
Kulu, P (2002). Selection of powder coatings for extreme erosion wear conditions. Advanced Engineering Materials, 4 (6), 392−397.
1.1.
1999
Rudenja, S.; Leygraf, C.; Pan, J.; Kulu, P.; Talimets, E.; Mikli, V. (1999). Duplex tin coatings deposited by arc plating for increased corrosion resistance of stainless steel substrates. Surface and Coatings Technology, 114 (2-3), 129−136. DOI: 10.1016/S0257-8972(99)00033-X.
1.1.
1998
Rudenja, S.; Kulu, P.; Talimets, E.; Mikli, V.; Straede, CA (1998). Corrosion performance of duplex tin coatings deposited by arc plating. Surface and Coatings Technology, 101, 247−250. DOI: 10.1016/S0257-8972(97)00623-3.
15.01.2021

Priit Kulu

https://etis.ee/CV/Priit_Kulu/eng
13.02.1945
51 01983
priit.kulu@ttu.ee

Career

Institutions and positions
01.01.2017–...   
Tallinn University of Technology , School of Engineering, Professor emeritus (1,00)
Business training: Small enterprises "KERMIS", director (1988 - 1991), "METKO" and "KATE", Head of Board (1991 - 1993)
01.01.2017–31.12.2019   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Senior Researcher (0,60)
01.09.2015–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Senior Researcher (0,60)
01.09.2015–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Professor emeritus
01.09.2012–2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, dean adviser (0,20)
2010–2012   
Tallinn University of Technology , Faculty of Mechanical Engineering, vice dean
2005–2010   
Tallinn University of Technology , Faculty of Mechanical Engineering, Dean
2005–2015   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Professor in Metals Science (1,00)
1992–2005   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Director
1992–2005   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Professor in Materials Science
1983–1992   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Metals Processing; Professor (1,00)
01.01.1983–31.12.1992   
Head of Department of Metals Processing of TUT
01.01.1981–31.12.1993   
Research training: Institute of Steels and Alloys, Moscow (1981), Kiiev Polytechnical Institute (1986), California Lutherian University (1992), German Universities (1991 - 1993)
01.01.1978–31.12.1980   
Senior lecturer of Department of Metals Processing of TPI
01.01.1970–31.12.1978   
Head of Powder Metallurgy Research Laboratory of TPI
01.01.1968–31.12.1970   
Assistant of Department of Metals Processing of TPI
 
 
Education
Tallinn Polytechnical Institute (TPI) 1968, Dipl. Eng. in Mechanical Engineering
 
 
R&D related managerial and administrative work
2015−...   
Estonian Research Council, member of expertboard for natural and technical sciences
2014−...   
Institutional Grant IUT19-29 Multi-scale structured ceramic-based composites for extreme applications, principal investigator
2014−...   
Professional Commitee of Mechanical Engineers, head
2013−...   
Int. Journal of Microstructure and Materials Properties (IJMMP), member of international board
2012−...   
Quest editor of Estonian Journal of Engineering
2009−...   
PhD Study Programm in Mechanical Engineering, leader
2007−...   
Magazine "Inseneeria", member of Editorial Board
2006−...   
Estonian Union of Mechanical Engineers, head, co-chairman
2005−...   
Estonian Agency of Technology (EAS), expert
2004−...   
Journal "Powder Metallurgy Progress", member of International Board
1997−...   
Association of Baltic Materials Societies (ABMS), vice-president
1996−...   
ASM International, member
2012−2014   
Board of Engineers Professions of Estonia, work-group of profession standards, member
2011−2016   
Interantional Federation of Heat Treatment and Surface Engineering (IFHTSE), assembly member
2008−2013   
Principal investigator of basic research theme 0140091s08 Hard coatings and surface engineering
2008−2012   
Materials Processing Transfer Centre of TUT, member of executive board
2005−2012   
Estonian Science Foundation, expert of science materials
2005−2010   
Study Board of Mechanical Engineering Faculty of TTU, Chairman, member
2005−2016   
Board of Faculty of Mechanical Engineering of TUT, chairman, member
2005−2016   
Federation of European Materials Societies (FEMS), member of General Assembly
2005−2008   
Escellence Centre of TUT in Tribological Materials and Tribology, head
2004−2007   
Board of Engineers Professions of Estonia, member
2004−2013   
Estonian Materials Science Society (EMSS), member
1992−2005   
Board of Mechanical Engineering Faculty, member

Qualifications

Academic degrees
Priit Kulu, Doctor's Degree, 1989, (sup) I. Fedortshenko, The Principles of Creation of Abrasive Erosion Wear Resistant Powder Materials and Coatings, Minsk, Belarusian Powder Metallurgy Scientific Production Association.
 
 
Honours & awards
2012, Priit Kulu, Medal of Honor of Slovak Academy of Sciences
2010, Priit Kulu, Estonian State Order of the White Star Fourth Class
2008, Priit Kulu, Researcher of the Year of TTU
2005, Priit Kulu, Estonian Chartered Engineer
2001, Priit Kulu, Euroengineer
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; SPECIFICATION: Coatings and surface engineering
 
 
Additional information
Doctor of Eng. Sc (D. Eng. Sc)
D. Eng. Sc., 1989 in Powder Metallurgy and Coatings, Belorussian Corporation of Powder Metallurgy
Candidate of Eng. Sc. (Ph. D.)
Ph. D., Institute of Materials Science of Ukrainian Academy of Sciences, 1972

Completed projects

Dissertations under supervision

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2020
Surzhenkov, A.; Vallikivi, A.; Mikli, V.; Viljus, M.; Vilgo, T.; Kulu, P. (2020). Wear resistant self-fluxing alloy based TiC-NiMo and Cr2C3-Ni hardmetal particles reinforced composite coatings. Tehnicki vjesnik - Technical Gazette, xx−xx [forthcoming].
1.1.
2019
Bendikiene, R.; Ciuplys, A.; Jankus, S. M.; Surzhenkov. A.; Tkachivskyi, D.; Juhani, K.; Viljus, M.; Traksmaa, R.; Antonov, M.; Kulu, P. (2019). Study of submerged and plasma arc welded composite hardfacings with a novel Cr3C2–Ni reinforcement. Proceedings of the Estonian Academy of Sciences, 68 (2), 150−157. DOI: 10.3176/proc.2019.2.06.
2.1.
2019
Kulu, P. (2019). Pronksiajast läbi rauaaja tänapäeva. Raud. Vask. Tallinn: TTÜ Kirjastus.
3.1.
2019
Tkachivskyi, D.; Juhani, K.; Surženkov, A.; Kulu, P.; Viljus, M.; Traksmaa, R.; Jankauskas, V.; Leišys, R. (2019). Production of Thermal Spray Cr3C2-Ni Powders by Mechanically Activated Synthesis. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (31−36). Trans Tech Publications Ltd.. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.31.
3.1.
2019
Kulu, P.; Goljandin, D.; Külaviir, J.; Hain, T.; Kivisto, M. (2019). Recycling of Niobium Slag by Disintegrator Milling. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (97−102). Trans Tech Publications Ltd.. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.97.
1.1.
2018
Simson, T.; Kulu, P.; Surženkov, A.; Ciuplys, A.; Viljus, M.; Zaldarys, G. (2018). Comparison of plasma transferred arc and submerged arc welded abrasive wear resistant composite hardfacings. Materials Science, 24 (2), 172−176. DOI: 10.5755/j01.ms.24.2.19121.
1.2.
2018
Saage, Ragnar; Peets, Jüri; Kulu, Priit; Peetsalu, Priidu; Viljus, Mart (2018). Metallographic investigation of iron blooms and bars from the smithy site of Käku, Estonia. Fennoscandia Archaeologica, XXXIV, 46−58.
1.1.
2017
Kulu, P.; Surženkov, A.; Tarbe, R.; Goljandin, D.; Tarraste, M.; Viljus, M.; Traksmaa, R.; Simson, T. (2017). Wear Resistance of Sintered Composite Hardfacings under Different Abrasive Wear Conditions. Materials Science, 23 (3), 249−253. DOI: 10.5755/j01.ms.23.3.17640.
1.1.
2017
Sarjas, H.; Surzhenkov, A.; Juhani, K.; Antonov, M.; Adoberg, E.; Kulu, P.; Viljus, M.; Traksmaa, R.; Matikainen, V.; Vuoristo, P. (2017). Abrasive-erosive wear of thermally sprayed coatings from experimental and commercial Cr3C2-based powders. Journal of Thermal Spray Technology, 26 (8), 2020−2029. DOI: 10.1007/s11666-017-0638-2.
3.1.
2017
Simson, T.; Kulu, P.; Surženkov, A.; Goljandin, D.; Tarbe, R.; Tarraste, M.; Viljus, M. (2017). Optimization of Structure of Hardmetal Reinforced Iron-Based PM Hardfacings for Abrasive Wear Conditions. In: D. Loca (Ed.). Engineering Materials and Tribology XXV (351−355). Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.351.
3.1.
2017
Surzhenkov, A.; Baroninš, J.; Viljus, M.; Traksmaa, R.; Kulu, P. (2017). Sliding Wear of Composite Stainless Steel Hardfacing under Room and Elevated Temperature. In: R. Bendikiene, K. Juzėnas (Ed.). Materials Engineering 2017 (195−200). Trans Tech Publications Ltd. (Solid State Phenomena; 267). DOI: 10.4028/www.scientific.net/SSP.267.195.
3.1.
2017
Kulu, P.; Casesnoves, F.; Simson, T.; Tarbe, R. (2017). Prediction of Abrasive Erosion Impact Wear of Composite Hardfacings. In: R. Bendikienė and K. Juzėnas (Ed.). Materials Engineering 2017 (201−206). Trans Tech Publications Ltd. (Solid State Phenomena; 267).10.4028/www.scientific.net/SSP.267.201.
6.4.
2017
Kulu, P.; Pirso, J.; Roosme, S.; Tapper, M. (2017). Metallide tehnoloogia kateeder 1947-1992. Materjalitehnika insitituut 1992-2015. Tallinn: Tallinna Tehnikaülikool.
1.1.
2016
Simson, T.; Kulu, P.; Surženkov, A.; Tarbe, R.; Viljus, M.; Tarraste, M.; Goljandin, D. (2016). Optimization of reinforcement content of PM hardfacing in abrasive wear conditions. Proceedings of the Estonian Academy of Sciences, 65 (2), 90−96. DOI: 10.3176/proc.2016.2.03.
1.1.
2016
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Beilmann, J. (2016). Decarburisation Effect on Hardened Strip Steel Fastening Components. Materials Science, 22 (1), 148−152. DOI: 10.5755/j01.ms.22.1.7467.
1.1.
2016
Jaason, K; Peetsalu, P.; Kulu, P.; Saarna, M.; Beilmann, J. (2016). Predictive tools for the isothermal hardening of strip steel parts in molten salt. Proceedings of the Estonian Academy of Sciences, 65 (2), 152−158. DOI: 10.3176/proc.2016.2.04.
3.4.
2016
Surzhenkov, A.; Tarbe, R.; Tarraste, M.; Simson, T.; Viljus, M.; Kulu, P. (2016). Optimization of hardmetal reinforcement content in Fe-based hardfacings for abrasive-impact wear conditions. In: Proceedings of the 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications (xx−xx). Asociace pro tepelné zpracování kovů.
6.4.
2016
Kulu, P.; Riives, J.; Ploompuu, T. (2016). Eesti Masinatööstuse Liit. Tallinna Tehnikaülikooli mehaanikateaduskond 80. Tallinn: TTÜ Kirjastus.
6.4.
2016
Kulu, P.; Asu, M.; Kaevats, A. (2016). Mehaanikainseneride koolitus 1998-2016. Tallinn: TTÜ Kirjastus.
1.1.
2015
Surzhenkov, A.; Goljandin, D.; Traksmaa, R.; Viljus, M.; Talviste, K.; Aruniit, A.; Latokartano, J.; Kulu, P. (2015). High Temperature Erosion Wear of Cermet Particles Reinforced Self-Fluxing Alloy HVOF Sprayed Coatings. Materials Science, 21 (3), 386−390. DOI: 10.5755/j01.ms.21.3.7617.
2.1.
2015
Goljandin, D.; Kulu, P. (2015). Disintegrators and Disintegrator Treatment of Materials. Germany: LAP LAMBERT Academic Publishing.
2.4.
2015
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Veinthal, R. (2015). Materjalitehnika : õpik kõrgkoolidele. II, Konstruktsioonimaterjalide tehnologia. Tallinn: TTÜ kirjastus.
3.2.
2015
Kulu, P.; Surženkov, A.; Tarbe, R.; Simson, T. (2015). Abrasive impact wear resistance of hardfacings. Proceedings - European Conference on Heat Treatment and 22st IFHTSE Congress: European Conference on Heat Treatment and 22st IFHTSE Congress, Venice, Italy, 20-22 May 2015. Itaalia: Associazione Italiana di Metallurgia, 1−9.
3.1.
2014
Tarbe, R.; Kulu, P.; Zikin, A.; Surzhenkov, A. (2014). Abrasive Wear Resistance of HVOF Sprayed and PTA-welded Hardmetal Hard Phase Reinforced Metal-Matrix Based Coatings. In: D. Loca (Ed.). Engineering Materials & Tribology XXII (3−7). . Trans Tech Publications Ltd. (Key Engineering Materials; 604).
3.1.
2013
Zikin, A.; Hussainova, I.; Katsich, C.; Kulu, P.; Goljandin, D. (2013). Wear behavior of recycled hard particle reinforced NiCrBSi hardfacings deposited by plasma transferred arc (PTA) process. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (179−184). Trans Tech Publications Ltd. (Key Engineering Materials; 527). DOI: 10.4028/www.scientific.net/KEM.527.179.
3.1.
2013
Käerdi, H.; Goljandin, D.; Kulu, P.; Sarjas, H.; Mikli, V. (2013). Characterization of Mechanically Milled Cermet Powders Produced by Disintegrator Technology. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (148−153). . Trans Tech Publications Ltd. (Key Engineering Materials; 527).
3.1.
2013
Kulu, P.; Tarbe, R.; Žikin, A.; Sarjas, H.; Surženkov, A. (2013). Abrasive Wear Resistance of Recycled Hardmetal Reinforced Thick coating. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (185−190). Trans Tech Publications Ltd. (Key Engineering Materials; 527). DOI: 10.4028/www.scientific.net/KEM.527.185.
1.1.
2012
Goljandin, D.; Sarjas, H.; Kulu, P.; Käerdi, H.; Mikli, V. (2012). Metal-Matrix Hardmetal/Cermet Reinforced Composite Powders for Thermal Spray. Materials Science, 18 (1), 84−89. DOI: 10.5755/j01.ms.18.1.1348.
1.1.
2012
Sarjas, H.; Goljandin, D.; Kulu, P.; Mikli, V.; Surženkov, A.; Vuoristo, P. (2012). Wear resistant thermal sprayed composite coatings based on iron self-fluxing alloy and recycled cermet powders. Materials Science, 18 (1), 34−39.
1.2.
2012
Zikin, A.; Hussainova, I.; Winkelmann, H.; Kulu, P.; Badisch, E. (2012). Plasma transferred arc hardfacings reinforced by chromium carbide based cermet particles. International Heat Treatment and Surface Engineering, 6 (2), 88−92. DOI: 10.1179/1749514811Z.0000000004.
1.1.
2011
Veinthal, R.; Kulu, P.; Käerdi, H. (2011). Microstructural aspects of abrasive wear of composite powder materials and coatings. International Journal of Materials and Product Technology, 40, 92−119. DOI: 10.1504/IJMPT.2011.037208.
3.2.
2011
Zikin, A.; Hussainova, I.; Winkelmann, H.; Kulu, P.; Badish, E. (2011). Plasma transferred arc hardfacings reinforced by chromium carbide-based cermet particles. Proceedings of the Heat Treatment and Surface Engineering 19th Congress: Heat Treatment and Surface Engineering 19th Congress, Glasgow, Scotland, 17 – 20 October, 2011. UK: Int. Federation for Heat treatment and Surface Engineering, 1−5.
1.1.
2009
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H. (2009). Characterization And Prediction Of Abrasive Wear Of Powder Composite Materials. Wear, 267 (12), 2216−2222. DOI: 10.1016/j.wear.2009.08.034.
1.1.
2009
Kulu, P.; Tarbe, R.; Käerdi, H.; Goljandin, D. (2009). Abrasivity and grindability study of mineral ores. Wear, 267 (11), 1832−1837. DOI: 10.1016/j.wear.2009.02.025.
1.2.
2009
Surzenkov, A.; Kulu, P.; Tarbe, R.; Mikli, V.; Sarjas, H.; Latokartano, J. (2009). Wear resistance of laser remelted thermally sprayed coatings. Estonian Journal of Engineering, 15 (4), 318−328.
1.1.
2008
Jankauskas, V.; Kreivaitis, R.; Kulu, P.; Antonov, M.; Milčius, D.; Varnauskas, V. (2008). Research of abrasive erosion wear for Fe-C-Cr-B hard layers. Mechanika, 4, 71−76.
1.1.
2007
Kulu, P.; Veinthal, R.; Käerdi, H. (2007). Characterisation and modelling of erosion wear of powder composite materials and coatings. International Journal of Materials and Product Technology, 28, 425−447.
1.1.
2007
Zimakov, S.; Goljandin, D.; Peetsalu, P.; Kulu, P. (2007). Metallic powders produced by the disintegrator technology. International Journal of Materials and Product Technology, 28, 226−251.
2.1.
2007
Kleis, I.; Kulu, P. (2007). Solid Particle Erosion : Occurrence, Prediction and Control. Springer.
1.2.
2006
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterizationa of WC-CO thermal spray coatings based on the composite powders. Powder Metallurgy Progress, 6 (1), 34−41.
1.2.
2006
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterization of WC-Co composite thermal spray powder and coating. Proceedings of the Estonian Academy of Sciences. Engineering, 12 (4), 435−444.
3.1.
2006
Tarbe, R.; Zimakov, S.; Peetsalu, P.; Kulu, P.; Mikli, V. (2006). Experimental Spray Powders and Coatings Produced from Recycled Hardmetal by Various Mechanical Methods. Euro PM2006 Congress & Exhibition Proceedings, Hard Materials, 1: Euro PM2006, Ghent, Belgium, 23-25 October 2006. Ed. European Powder Metallurgy Association. European Powder Metallurgy Association, 259−264.
15.01.2021

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Uus otsing (Beetaversioon) Lihtotsing Tühjenda
  • Leitud 30 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
IUTIUT19-29 Mitmeastmeliselt struktureeritud keraamika-baasil komposiitmaterjalid kasutamiseks ekstreemtingimustes 01.01.201431.12.2019Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond; Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 1 770 000,00 EUR
MUUV337Desintegraatori konstrueerimine20.10.200601.03.2007Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool11 184,54 EUR
MUUV313 (LT/05/B/F/PP-171014)Euroopa tasemel keevitusspetsialistide õppeprogrammide arendamine01.10.200530.09.2007Andres LaansooTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool22 743,98 EUR
MUU537LFinEst arendusprojekti RePlast plastiku taaskasutuse turuuuring01.07.200531.12.2006Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool10 060,65 EUR
MUU270LGaasijahuti bimetalse torulaua messingi pealesulatamise tehnoloogia15.09.200231.12.2002Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool639,12 EUR
MUUT233 (0140233s98)Integreeritud mõõte- ja kvaliteedisüsteemid01.01.199831.12.2002Rein LaaneotsTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut, Kvaliteeditehnika ja metroloogia õppetool81 487,35 EUR
MUUVE472Kaasaegsed mitmefaasilised tribomaterjalid01.04.201031.03.2014Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool140 000,00 EUR
MUUV235Keskkonna mõju pulbermaterjalide ja pinnete kulumiskindlusele01.02.200430.09.2006Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool12 782,33 EUR
MUUT215 (0140215s98)Komposiitmaterjalide ja -pinnete tehnoloogia01.01.199831.12.2001Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool216 277,02 EUR
MUUBF120Konverentsi Baltmattrib 2009 korraldamine01.01.200931.12.2009Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool4 473,82 EUR
SFSF0142505s03Kulumiskindlad materjalid ja kulumine01.01.200331.12.2007Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond668 100,42 EUR
MUU517FKõrgtehnoloogilised kõvapinded tööriistamajanduses01.03.200530.11.2006Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool177 399,56 EUR
MUUAR12132Kõrgtehnoloogiliste pinnete ja komposiitmaterjalide arendus kuluosade tarvis (Wear Hard)01.07.201231.12.2014Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut182 889,15 EUR
SFSF0140091s08Kõvapinded ja pinnatehnika01.01.200831.12.2013Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond705 840,56 EUR
MUUV176Laboratoorne desintegraator DSL-160M12.02.200231.12.2002Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool7 756,83 EUR
MUUV301Materjalide löökkulumise uurimine01.11.200530.04.2006Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool3 080,54 EUR
MUU232LMaterjalide, masinaehituse ja puidutehnoloogia arenduskeskuse eeluuring01.06.200231.12.2002Rein KüttnerTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja tööstustehnika instituut, Raalintegreeritud tootmise ja projekteerimise õppetool10 475,12 EUR
MUULep8123Metalliõpetuse ja metallide tehnoloogia terminoloogia02.09.200831.12.2008Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool1 917,35 EUR
ETFETF5881Nanopulbrid ja nanostruktuursed pinded01.01.200431.12.2006Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond33 511,51 EUR
MUU249LNioobiumi jahvatustehnoloogia. Tehnoloogilist aparatuuri tugevdav tehnoloogia03.06.200230.11.2002Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool1 917,35 EUR
SFSF0142082s02Pihustus- ja sadestuspinded (materjalid, tehnoloogia, omadused)01.01.200231.12.2005Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond290 861,92 EUR
MUU122LPilootseade autorehvide jämepurustamiseks01.04.200120.12.2002Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool5 112,93 EUR
MUUV244Pulberkomposiitmaterjalide väsimustugevus agressiivses keskkonnas20.05.200430.09.2006Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool5 752,05 EUR
MUULep10047Survetöötluse valdkonna ja komposiitmaterjalide tehnoloogia määratlused ja terminid29.04.201010.01.2011Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool1 278,23 EUR
MUU344FToodete, materjali- ja tööstustehnoloogiate arenduskeskuse (MATTEH) täistaotluse koostamine13.06.200331.12.2003Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool18 917,85 EUR