See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Yaroslav Holovenko

https://etis.ee/CV/Yaroslav_Holovenko/est
17.04.1992
58300394
6203345
yaholo@ttu.ee

Teenistuskäik

Töökohad ja ametid
01.08.2019–14.02.2020   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Insener (0,70)
 
 
Haridustee
2015–...   
Tallinn University of Technology, Mechanical Engineering - PhD studies
2013–2015   
National Technical University of Ukraine "Kyiv Polytechnic Institute", Physical Engineering Faculty - Master studies
2009–2013   
National Technical University of Ukraine "Kyiv Polytechnic Institute", Physical Engineering Faculty - Bachelor studies

Kvalifikatsioon

Teaduskraadid
Yaroslav Holovenko, doktorikraad, 2019, (juh) Renno Veinthal; Lauri Kollo, 3D printed metal and metal-ceramic cellular lattice structures for wear and thermoacoustic applications (3D prinditud metall- ja metall-keraamilised kärgvõre struktuurid triboloogilistele- ja termoakustilistele rakendustele), Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut.
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS KLASSIFIKAATOR: T152 Komposiitmaterjalid

Lõppenud projektid

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2020
Kumar, R.; Antonov, M.; Holovenko, Y.; Surzenkov, A. (2020). Erosive Wear Resistance of Nature-inspired Flexible Materials. Tribology Letters, 68 (2). DOI: 10.1007/s11249-020-01296-8.
2.1.
2020
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2020). Biomaterials for Bone Tissue Engineering. In: Special Issue Editor: J. A. Sanz-Herrera (Ed.). Biomaterials for Bone Tissue Engineering (19−29). Switzerland : MDPI. DOI: 10.3390/books978-3-03928-966-0.
1.1.
2019
Minasyan, Tatevik; Liu, Le; Holovenko, Yaroslav; Aydinyan, Sofiya; Hussainova, Irina (2019). Additively manufactured mesostructured MoSi2-Si3N4 ceramic lattice. Ceramics International, 45 (8), 9926−9933. DOI: 10.1016/j.ceramint.2019.02.035.
1.1.
2019
Auriemma, F.; Holovenko, Y. (2019). Performance of Additive Manufactured Stacks in a Small Scale Thermoacoustic Heat Engine. SAE Technical Paper Series, 1−9.10.4271/2019-01-1534.
1.1.
2019
Holovenko, Y; Kollo, L; Jõeleht, M; Ivanov, R; Soloviova, T; Veinthal, R; (2019). Production of metal–ceramic lattice structures by selective laser melting and carburizing or nitriding. Proceedings of the Estonian Academy of Sciences, 68 (2), 131−139. DOI: 10.3176/proc.2019.2.02.
1.1.
2019
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2019). <p>Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications</p>. Applied Sciences, 9 (18), ARTN: 3844. DOI: 10.3390/app9183844.
1.1.
2019
Holovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, Renno (2019). Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites. International Journal of Refractory Metals and Hard Materials, 105087. DOI: 10.1016/j.ijrmhm.2019.105087.
3.1.
2019
Antonov, M.; Ivanov, R.; Holovenko, Y.; Goljandin, D.; Rahmaniahranjani, R.; Kollo, L.; Hussainova, I. (2019). 3D printing of plain and gradient cermets with efficient use of raw materials. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (239−245). Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.239.
3.1.
2019
Auriemma, F.; Holovenko, Y. (2019). Use of Selective Laser Melting for Manufacturing the Porous Stack of a Thermoacoustic Engine. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (246−251). Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.246.
1.1.
2018
Holovenko, Y.; Antonov, M.; Kollo, L.; Hussainova, I. (2018). Friction studies of metal surfaces with various 3D printed patterns tested in dry sliding conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (1), 43−53. DOI: 10.1177/1350650117738920.
3.1.
2018
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Soloviova, T.; Veinthal, R. (2018). Evaluation of titanium matrix composites with additions of 5 vol. % B4C and TiC processed via Selective Laser Melting. EuroPM 2018 proceedings: Euro PM2018 Congress & Exhibition, Bilbao, Spain, 14 - 18 October 2018. European Powder Metallurgy Association (EPMA).
3.1.
2018
Jaworska, L.; Cyboron, J.; Cygan, S.; Laszkiewicz-Lukasik, J.; Podsiadlo, M.; Novak, P.; Holovenko, Y. (2018). New materials through a variety of sintering methods. IOP Conference Series: Materials Science and Engineering, 329, UNSP 012004.10.1088/1757-899X/329/1/012004.
3.1.
2016
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Pohlak, M.; Veinthal, R. (2016). Effect of Hot Isostatic Pressing on Cellular Lattice Structures Obtained by Selective Laser Melting. World PM2016 proceedings: World PM2016 Congress & Exhibition, Hamburg, Germany, 9-13 October 2016. European Powder Metallurgy Association, USB.

Tööstusomand

15.07.2020

Yaroslav Holovenko

https://etis.ee/CV/Yaroslav_Holovenko/eng
17.04.1992
58300394
6203345
yaholo@ttu.ee

Career

Institutions and positions
01.08.2019–14.02.2020   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Engineer (0,70)
 
 
Education
2015–...   
Tallinn University of Technology, Mechanical Engineering - PhD studies
2013–2015   
National Technical University of Ukraine "Kyiv Polytechnic Institute", Physical Engineering Faculty - Master studies
2009–2013   
National Technical University of Ukraine "Kyiv Polytechnic Institute", Physical Engineering Faculty - Bachelor studies

Qualifications

Academic degrees
Yaroslav Holovenko, Doctor's Degree, 2019, (sup) Renno Veinthal; Lauri Kollo, 3D printed metal and metal-ceramic cellular lattice structures for wear and thermoacoustic applications, Tallinn University of Technology School of Engineering, Department of Mechanical and Industrial Engineering.
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS CLASSIFICATION: T152 Composite materials
 
 

Completed projects

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2020
Kumar, R.; Antonov, M.; Holovenko, Y.; Surzenkov, A. (2020). Erosive Wear Resistance of Nature-inspired Flexible Materials. Tribology Letters, 68 (2). DOI: 10.1007/s11249-020-01296-8.
2.1.
2020
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2020). Biomaterials for Bone Tissue Engineering. In: Special Issue Editor: J. A. Sanz-Herrera (Ed.). Biomaterials for Bone Tissue Engineering (19−29). Switzerland : MDPI. DOI: 10.3390/books978-3-03928-966-0.
1.1.
2019
Minasyan, Tatevik; Liu, Le; Holovenko, Yaroslav; Aydinyan, Sofiya; Hussainova, Irina (2019). Additively manufactured mesostructured MoSi2-Si3N4 ceramic lattice. Ceramics International, 45 (8), 9926−9933. DOI: 10.1016/j.ceramint.2019.02.035.
1.1.
2019
Auriemma, F.; Holovenko, Y. (2019). Performance of Additive Manufactured Stacks in a Small Scale Thermoacoustic Heat Engine. SAE Technical Paper Series, 1−9.10.4271/2019-01-1534.
1.1.
2019
Holovenko, Y; Kollo, L; Jõeleht, M; Ivanov, R; Soloviova, T; Veinthal, R; (2019). Production of metal–ceramic lattice structures by selective laser melting and carburizing or nitriding. Proceedings of the Estonian Academy of Sciences, 68 (2), 131−139. DOI: 10.3176/proc.2019.2.02.
1.1.
2019
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2019). <p>Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications</p>. Applied Sciences, 9 (18), ARTN: 3844. DOI: 10.3390/app9183844.
1.1.
2019
Holovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, Renno (2019). Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites. International Journal of Refractory Metals and Hard Materials, 105087. DOI: 10.1016/j.ijrmhm.2019.105087.
3.1.
2019
Antonov, M.; Ivanov, R.; Holovenko, Y.; Goljandin, D.; Rahmaniahranjani, R.; Kollo, L.; Hussainova, I. (2019). 3D printing of plain and gradient cermets with efficient use of raw materials. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (239−245). Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.239.
3.1.
2019
Auriemma, F.; Holovenko, Y. (2019). Use of Selective Laser Melting for Manufacturing the Porous Stack of a Thermoacoustic Engine. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (246−251). Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.246.
1.1.
2018
Holovenko, Y.; Antonov, M.; Kollo, L.; Hussainova, I. (2018). Friction studies of metal surfaces with various 3D printed patterns tested in dry sliding conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (1), 43−53. DOI: 10.1177/1350650117738920.
3.1.
2018
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Soloviova, T.; Veinthal, R. (2018). Evaluation of titanium matrix composites with additions of 5 vol. % B4C and TiC processed via Selective Laser Melting. EuroPM 2018 proceedings: Euro PM2018 Congress & Exhibition, Bilbao, Spain, 14 - 18 October 2018. European Powder Metallurgy Association (EPMA).
3.1.
2018
Jaworska, L.; Cyboron, J.; Cygan, S.; Laszkiewicz-Lukasik, J.; Podsiadlo, M.; Novak, P.; Holovenko, Y. (2018). New materials through a variety of sintering methods. IOP Conference Series: Materials Science and Engineering, 329, UNSP 012004.10.1088/1757-899X/329/1/012004.
3.1.
2016
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Pohlak, M.; Veinthal, R. (2016). Effect of Hot Isostatic Pressing on Cellular Lattice Structures Obtained by Selective Laser Melting. World PM2016 proceedings: World PM2016 Congress & Exhibition, Hamburg, Germany, 9-13 October 2016. European Powder Metallurgy Association, USB.

Industrial property

15.07.2020

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 3 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
IUTIUT19-29 Mitmeastmeliselt struktureeritud keraamika-baasil komposiitmaterjalid kasutamiseks ekstreemtingimustes 01.01.201431.12.2019Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond; Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 1 770 000,00 EUR
PRGPRG643Biojäljendatud tehnostruktuurid triboloogilisteks rakendusteks01.01.202031.12.2024Irina HussainovaTallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 514 250,00 EUR
MUUB56Innovatiivsed polükristallilisest teemandist kuluvosad pehme pinnase tunneli puurimisseadmete tarbeks01.05.201630.04.2019Maksim AntonovTallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 125 100,00 EUR