See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Lauri Kollo

https://etis.ee/CV/Lauri_Kollo/est
19.10.1978
56500456
6203356
lauri.kollo@taltech.ee
C-3801-2014

Teenistuskäik

Töökohad ja ametid
01.01.2017–31.12.2019   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Vanemteadur (1,00)
01.10.2011–31.05.2012   
Kalifornia Ülikool Davis'es, Külalisteadlane (1,00)
01.01.2008–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Vanemteadur (1,00)
01.01.2004–31.12.2007   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Teadur (0,50)
01.01.2003–31.12.2003   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Insener (0,50)
01.01.2002–31.12.2003   
EMPA Thun, praktikant
 
 
Haridustee
2008–2009   
EMPA Thun, Šveits, järeldoktorantuur
2003–2007   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Masina- ja aparaadiehitus, doktoriõpe
2002–2003   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Tootmistehnika magistratuur
1997–2002   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Tootmistehnika bakalaureuseõpe
1994–1997   
Jakob Westholmi Gümnaasium, keskkool
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2012−2013   
Tallinna Tehnikaülikooli Mehaanikateaduskonna nõukogu liige
2005−2010   
Euroopa Pulbermetallurgia ühingu (EPMA) liige
 
 
Lisainfo
Õppemetoodiline töö:
Pulbermetallurgia (MTT0070) õppeaine metoodilise materjali väljatöötamine. Kohandamine e-õppe keskkonda.
Õppetegevus:
Pulbermetallurgia ja pindamine (MTT0070), 4 loengut aastas
Kõrgtehnoloogiamaterjalid (MTX9010), 2 loengut aastas
Kiirprototüüpimise projekt (MET0030), 1 loeng aastas

Kvalifikatsioon

Teaduskraadid
Lauri Kollo, doktorikraad, 2007, (juh) Jakob Kübarsepp, Sinter/HIP Technology of TiC-based Cermets (Titaankarbiidkermiste survepaagutustehnoloogia), Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool.
Lauri Kollo, magistrikraad (teaduskraad), 2003, (juh) Renno Veinthal, Tribological properties of nanocomposite TiC/DLC coatings, Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut.
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; TÄPSUSTUS: Kõvasulamid, kulumiskindlad materjalid, paagutustehnoloogiad, jahvatustehnoloogiad, Kõvasulamid, kulumiskindlad materjalid, metallmaatrikskomposiidid, pulbermetallurgia
 
 
Lisainfo
Metallide ja keraamika baasil komposiitmaterjalide tehnoloogiad. Metallide ning komposiitide 3D printimine.

Lõppenud projektid

Juhendamisel väitekirjad

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2020
Zhao, C.; Wang, Z.; Li, D.; Xie, M.; Kollo, L.; Luo, Z.; Zhang, W.; Prashanth, K. G. (2020). Comparison of additively manufacturing samples fabricated from pre-alloyed and mechanically mixed powders. Journal of Alloys and Compounds, 830, #154603. DOI: 10.1016/j.jallcom.2020.154603.
1.1.
2020
Wang, Z.; Xie, M.; Li, Y.; Zhang, W.; Yang, C.; Kollo, L.; Eckert, J.; Prashanth, K. G. (2020). Premature failure of an additively manufactured material. NPG Asia Materials, 12 (1). DOI: 10.1038/s41427-020-0212-0.
2.1.
2020
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2020). Biomaterials for Bone Tissue Engineering. In: Special Issue Editor: J. A. Sanz-Herrera (Ed.). Biomaterials for Bone Tissue Engineering (19−29). Switzerland : MDPI. DOI: 10.3390/books978-3-03928-966-0.
3.1.
2020
Minasyan, T.; Liu, L.; Aydinyan, S.; Kollo, L.; Aghayan, M.; Hussainova, I. (2020). Lattice of MoSi2/Si3N4 by selective laser melting. In: EuroPM 2018, Congress and Exhibition, 14-18 October, Bilbao, Spain. European Powder Metallurgy Association. (156875).
1.1.
2019
Rahmani, R.; Antonov, M.; Kollo, L. (2019). Wear Resistance of (Diamond-Ni)-Ti6Al4V Gradient Materials Prepared by Combined Selective Laser Melting and Spark Plasma Sintering Techniques. Advances in Tribology, Article ID 5415897. DOI: 10.1155/2019/5415897.
1.1.
2019
Holovenko, Y; Kollo, L; Jõeleht, M; Ivanov, R; Soloviova, T; Veinthal, R; (2019). Production of metal–ceramic lattice structures by selective laser melting and carburizing or nitriding. Proceedings of the Estonian Academy of Sciences, 68 (2), 131−139.10.3176/proc.2019.2.02.
1.1.
2019
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2019). <p>Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications</p>. Applied Sciences, 9 (18), ARTN: 3844. DOI: 10.3390/app9183844.
1.1.
2019
Holovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, Renno (2019). Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites. International Journal of Refractory Metals and Hard Materials, 105087. DOI: 10.1016/j.ijrmhm.2019.105087.
3.1.
2019
Pramono, A.; Kollo, L.; Kommel, L.; Veinthal, R. (2019). High-strength aluminum alloy of ultrafine grained by consolidation-ECAP. IOP Conference Series: Materials Science and Engineering, 478 (1). IOP PUBLISHING LTD, #012035.10.1088/1757-899X/478/1/012035.
3.1.
2019
Antonov, M.; Ivanov, R.; Holovenko, Y.; Goljandin, D.; Rahmaniahranjani, R.; Kollo, L.; Hussainova, I. (2019). 3D printing of plain and gradient cermets with efficient use of raw materials. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (239−245). Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.239.
3.1.
2019
Liu, L.; Minasyan, T.; Ivanov, R.; Kollo, L.; Aydinyan, S.; Hussainova, I. (2019). Fabrication of Copper by Selective Diode Laser Melting. Euro PM2019 Congress & Exhibition, 13 - 16 October 2019. Maastricht: European Powder Metallurgy Association,.
1.1.
2018
Holovenko, Y.; Antonov, M.; Kollo, L.; Hussainova, I. (2018). Friction studies of metal surfaces with various 3D printed patterns tested in dry sliding conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (1), 43−53. DOI: 10.1177/1350650117738920.
1.1.
2018
Minasyan, T.; Aghayan, M.; Liu, L.; Aydinyan, S.; Kollo, L.; Hussainova, I.; Rodríguez, M. (2018). Combustion synthesis of MoSi2 based composite and selective laser sintering thereof. Journal of European Ceramic Society, 38 (11), 3814−3821.10.1016/j.jeurceramsoc.2018.04.043.
1.1.
2018
Minasyan, T.; Liu, L.; Aghayan, M.; Kollo, L.; Kamboj, N.; Aydinyan, S.; Hussainova, I. (2018). A novel approach to fabricate Si3N4 by selective laser melting. Ceramics International, 44 (12), 13689−13694. DOI: 10.1016/j.ceramint.2018.04.208.
1.1.
2018
Leparoux, M.; Kollo, L.; Kwon, H.; Kallip, K.; Babu, N. K.; AlOgab, K.; Talari, M. K. (2018). Solid State Processing of Aluminum Matrix Composites Reinforced with Nanoparticulate Materials. Advanced Engineering Materials.10.1002/adem.201800401.
3.1.
2018
Minasyan, T.; Liu, L.; Aydinyan, S.; Kollo, L.; Aghayan, M.; Hussainova, I. (2018). Lattice of MoSi2/Si3N4 by selective laser melting. EuroPM 2018, Congress and Exhibition, Bilbao, Spain, 14-18 October. European Powder Metallurgy Association, 3993050.
1.1.
2017
Mural, Z.; Kollo, L.; Xia, M.; Bahl, C. R. H.; Bech Abrahamsen, A.; Neves Bez, H.; Link, J.; Veinthal, R. (2017). The effect of nano-TiC addition on sintered Nd-Fe-B permanent magnets. Journal of Magnetism and Magnetic Materials, 429, 23−28.10.1016/j.jmmm.2016.12.115.
1.1.
2016
Pramono, A.; Kommel, L.; Kollo, L.; Veinthal, R. (2016). The Aluminum Based Composite Produced by Self Propagating High Temperature Synthesis. Materials Science, 22 (1), 41−43.10.5755/j01.ms.22.1.7500.
1.1.
2016
Pramono, A.; Kollo, L.; Veinthal, R. (2016). Hot and cold regions during accumulative roll bonding of Al/Al2O3 nanofibre composites. Proceedings of the Estonian Academy of Sciences, 65 (2), 132−137.10.3176/proc.2016.2.12.
1.1.
2016
Mural, Z.; Kolnes, M.; Afshari, H.; Kollo, L.; Link, J.; Veinthal, R. (2016). Fabrication and microstructural analysis of Didymium-Fe-B magnet alloys with Ce additions. Proceedings of the Estonian Academy of Sciences, 65 (2), 166−171.
3.1.
2016
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Pohlak, M.; Veinthal, R. (2016). Effect of Hot Isostatic Pressing on Cellular Lattice Structures Obtained by Selective Laser Melting. World PM2016 proceedings: World PM2016 Congress & Exhibition, Hamburg, Germany, 9-13 October 2016. European Powder Metallurgy Association, USB.
3.2.
2016
Mural, Z., Kollo, L., Veinthal, R. (2016). Spark Plasma Sintered Nd-Fe-B Magnets from High-Energy Ball Milled Powders. The 24th International Workshop on Rare-Earth and Future Permanent Magnets and Their Applications (REPM 16), Darmstadt, Germany, 28.08-01.09.2016. Darmstadt, Germany: Technical University of Darmstadt and Fraunhofer IWKS, 619−623.
1.1.
2015
Kolnes, M.; Kübarsepp, J.; Kollo, L.; Viljus, M.. (2015). Characterization of TiC-FeCrMn cermets produced by powder metallurgy method. Materials Science, 21 (3), 353−357.10.5755/j01.ms.21.3.7364.
1.1.
2015
Aghayan, M.; Gasik, M.; Hussainova, I.; Rubio-Marcos, F.; Kollo, L.; Kubarsepp, J. (2015). Thermal and microstructural analysis of doped alumina nanofibers. Thermochimica Acta, 602, 43−48.10.1016/j.tca.2015.01.009.
1.1.
2015
Jõgiaas, T.; Kollo, L.; Kozlova, J.; Tamm, A.; Hussainova, I.; Kukli, K. (2015). Effect of Atomic Layer Deposited Aluminium Oxide on Mechanical Properties of Porous Silicon Carbide. Ceramics International, 41 (6), 7519−7528.10.1016/j.ceramint.2015.02.074.
3.1.
2015
Kallip, K.; Kollo, L.; Leparoux, M.; Bradbury, C. R. (2015). Nanoparticulate Reinforced Aluminum Alloy Composites Produced by Powder Metallurgy Route. In: Sano, T.; Srivatsan, T.S. (Ed.). Advanced Composites for Aerospace, Marine, and Land Applications II (165−174). Hoboken, New Jersey: John Wiley & Sons Ltd. DOI: 10.1002/9781119093213.ch12.
6.3.
2015
Jõeleht, M.; Kollo, L.; Pohlak, M.; Veinthal, R. (2015). Uued võimalused 3D-printimise valdkonnas- metallide printimine peagi võimalik ka Eestis. (32−35)..
1.1.
2014
Jõgiaas, T.; Arroval, T.; Kollo, L.; Kozlova, J.; Käämbre, T.; Mändar, H.; Tamm, A.; Hussainova, I.; Kukli, K. (2014). Atomic layer deposition of alumina on γ-Al2O3 nanofibers. physica status solidi (a), 211 (2), 403−408.10.1002/pssa.201330083.
1.1.
2012
Kollo, L.; Kallip, K.; Gomon, J.-K.; Kommel, L. (2012). Hot Consolidation of Aluminum and Aluminum nano-MMC Powders by Equal Channel Angular Pressing. Materials Science, 18 (3), 234−237.10.5755/j01.ms.18.3.2431.
1.1.
2011
Kollo, L.; Bradbury, C.; Veinthal, R.; Jäggi, C.; Carreño-Morelli, E.; Leparoux, M. (2011). Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidation. Materials Science and Engineering A, 528 (21), 6606−6615.10.1016/j.msea.2011.05.037.
1.1.
2010
Kollo, L.; Leparoux, M.; Bradbury, C.; Jäggi, C.; Carreño-Morelli, E.; Rodríguez-Arbaizar, M. (2010). Investigation of Planetary Milling for nano-Silicon Carbide Reinforced Aluminium Metal Matrix Composites. Journal of Alloys and Compounds, 489 (2), 394−400.10.1016/j.jallcom.2009.09.128.

Tööstusomand

15.01.2021

Lauri Kollo

https://etis.ee/CV/Lauri_Kollo/eng
19.10.1978
56500456
6203356
lauri.kollo@taltech.ee
C-3801-2014

Career

Institutions and positions
01.01.2017–31.12.2019   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Senior Researcher (1,00)
01.10.2011–31.05.2012   
University of California, Davis, Visiting Scholar (1,00)
01.01.2008–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Senior Researcher (1,00)
01.01.2004–31.12.2007   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Researcher (0,50)
01.01.2003–31.12.2003   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , engineer (0,50)
01.01.2002–31.12.2003   
EMPA Thun, Switzerland, trainee;
 
 
Education
2008–2009   
Empa - Swiss Federal Laboratories for Materials Testing and Research, Post Doc
2003–2007   
Tallinn University of Technology, Mechanical Engineering, PhD studies
2002–2003   
Tallinn University of Technology, Mechanical Engineering, Production Engineering, Master studies
1997–2002   
Tallinn University of Technology, Mechanical Engineering, Production Engineering, Bachelor studies
1994–1997   
Jakob Westholm Grammar School, high school
 
 
R&D related managerial and administrative work
2012−2013   
Member of the Council of the Faculty of Mechanical Engineering, Tallinn University of Technology
2005−2010   
Member of the European Powder Metallurgy Association (EPMA)
 
 
Additional information
Teaching activities:
Powder Metallurgy and Surface Engineering (MTT0070), 4 lectures per year
High Technology Materials (MTX9010), 2 lectures per year;
Rapid prototyping project (MET0030), 1 lecture per year

Qualifications

Academic degrees
Lauri Kollo, Doctor's Degree, 2007, (sup) Jakob Kübarsepp, Sinter/HIP Technology of TiC-based Cermets, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering Chair of Metals Processing.
Lauri Kollo, Research Master's Degree, 2003, (sup) Renno Veinthal, Tribological properties of nanocomposite TiC/DLC coatings (Nanokomposiitsete TiC/DLC pinnete triboloogia uurimine), Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering.
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; SPECIFICATION: , Hard metals, cermets, metal matrix composites, powder metallurgy
 
 
Additional information
Processing and properties of metal and ceramic based composite materials. Metal additive manufacturing of metals and composites.

Completed projects

Dissertations under supervision

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2020
Zhao, C.; Wang, Z.; Li, D.; Xie, M.; Kollo, L.; Luo, Z.; Zhang, W.; Prashanth, K. G. (2020). Comparison of additively manufacturing samples fabricated from pre-alloyed and mechanically mixed powders. Journal of Alloys and Compounds, 830, #154603. DOI: 10.1016/j.jallcom.2020.154603.
1.1.
2020
Wang, Z.; Xie, M.; Li, Y.; Zhang, W.; Yang, C.; Kollo, L.; Eckert, J.; Prashanth, K. G. (2020). Premature failure of an additively manufactured material. NPG Asia Materials, 12 (1). DOI: 10.1038/s41427-020-0212-0.
2.1.
2020
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2020). Biomaterials for Bone Tissue Engineering. In: Special Issue Editor: J. A. Sanz-Herrera (Ed.). Biomaterials for Bone Tissue Engineering (19−29). Switzerland : MDPI. DOI: 10.3390/books978-3-03928-966-0.
3.1.
2020
Minasyan, T.; Liu, L.; Aydinyan, S.; Kollo, L.; Aghayan, M.; Hussainova, I. (2020). Lattice of MoSi2/Si3N4 by selective laser melting. In: EuroPM 2018, Congress and Exhibition, 14-18 October, Bilbao, Spain. European Powder Metallurgy Association. (156875).
1.1.
2019
Rahmani, R.; Antonov, M.; Kollo, L. (2019). Wear Resistance of (Diamond-Ni)-Ti6Al4V Gradient Materials Prepared by Combined Selective Laser Melting and Spark Plasma Sintering Techniques. Advances in Tribology, Article ID 5415897. DOI: 10.1155/2019/5415897.
1.1.
2019
Holovenko, Y; Kollo, L; Jõeleht, M; Ivanov, R; Soloviova, T; Veinthal, R; (2019). Production of metal–ceramic lattice structures by selective laser melting and carburizing or nitriding. Proceedings of the Estonian Academy of Sciences, 68 (2), 131−139.10.3176/proc.2019.2.02.
1.1.
2019
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2019). <p>Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications</p>. Applied Sciences, 9 (18), ARTN: 3844. DOI: 10.3390/app9183844.
1.1.
2019
Holovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, Renno (2019). Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites. International Journal of Refractory Metals and Hard Materials, 105087. DOI: 10.1016/j.ijrmhm.2019.105087.
3.1.
2019
Pramono, A.; Kollo, L.; Kommel, L.; Veinthal, R. (2019). High-strength aluminum alloy of ultrafine grained by consolidation-ECAP. IOP Conference Series: Materials Science and Engineering, 478 (1). IOP PUBLISHING LTD, #012035.10.1088/1757-899X/478/1/012035.
3.1.
2019
Antonov, M.; Ivanov, R.; Holovenko, Y.; Goljandin, D.; Rahmaniahranjani, R.; Kollo, L.; Hussainova, I. (2019). 3D printing of plain and gradient cermets with efficient use of raw materials. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (239−245). Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.239.
3.1.
2019
Liu, L.; Minasyan, T.; Ivanov, R.; Kollo, L.; Aydinyan, S.; Hussainova, I. (2019). Fabrication of Copper by Selective Diode Laser Melting. Euro PM2019 Congress & Exhibition, 13 - 16 October 2019. Maastricht: European Powder Metallurgy Association,.
1.1.
2018
Holovenko, Y.; Antonov, M.; Kollo, L.; Hussainova, I. (2018). Friction studies of metal surfaces with various 3D printed patterns tested in dry sliding conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232 (1), 43−53. DOI: 10.1177/1350650117738920.
1.1.
2018
Minasyan, T.; Aghayan, M.; Liu, L.; Aydinyan, S.; Kollo, L.; Hussainova, I.; Rodríguez, M. (2018). Combustion synthesis of MoSi2 based composite and selective laser sintering thereof. Journal of European Ceramic Society, 38 (11), 3814−3821.10.1016/j.jeurceramsoc.2018.04.043.
1.1.
2018
Minasyan, T.; Liu, L.; Aghayan, M.; Kollo, L.; Kamboj, N.; Aydinyan, S.; Hussainova, I. (2018). A novel approach to fabricate Si3N4 by selective laser melting. Ceramics International, 44 (12), 13689−13694. DOI: 10.1016/j.ceramint.2018.04.208.
1.1.
2018
Leparoux, M.; Kollo, L.; Kwon, H.; Kallip, K.; Babu, N. K.; AlOgab, K.; Talari, M. K. (2018). Solid State Processing of Aluminum Matrix Composites Reinforced with Nanoparticulate Materials. Advanced Engineering Materials.10.1002/adem.201800401.
3.1.
2018
Minasyan, T.; Liu, L.; Aydinyan, S.; Kollo, L.; Aghayan, M.; Hussainova, I. (2018). Lattice of MoSi2/Si3N4 by selective laser melting. EuroPM 2018, Congress and Exhibition, Bilbao, Spain, 14-18 October. European Powder Metallurgy Association, 3993050.
1.1.
2017
Mural, Z.; Kollo, L.; Xia, M.; Bahl, C. R. H.; Bech Abrahamsen, A.; Neves Bez, H.; Link, J.; Veinthal, R. (2017). The effect of nano-TiC addition on sintered Nd-Fe-B permanent magnets. Journal of Magnetism and Magnetic Materials, 429, 23−28.10.1016/j.jmmm.2016.12.115.
1.1.
2016
Pramono, A.; Kommel, L.; Kollo, L.; Veinthal, R. (2016). The Aluminum Based Composite Produced by Self Propagating High Temperature Synthesis. Materials Science, 22 (1), 41−43.10.5755/j01.ms.22.1.7500.
1.1.
2016
Pramono, A.; Kollo, L.; Veinthal, R. (2016). Hot and cold regions during accumulative roll bonding of Al/Al2O3 nanofibre composites. Proceedings of the Estonian Academy of Sciences, 65 (2), 132−137.10.3176/proc.2016.2.12.
1.1.
2016
Mural, Z.; Kolnes, M.; Afshari, H.; Kollo, L.; Link, J.; Veinthal, R. (2016). Fabrication and microstructural analysis of Didymium-Fe-B magnet alloys with Ce additions. Proceedings of the Estonian Academy of Sciences, 65 (2), 166−171.
3.1.
2016
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Pohlak, M.; Veinthal, R. (2016). Effect of Hot Isostatic Pressing on Cellular Lattice Structures Obtained by Selective Laser Melting. World PM2016 proceedings: World PM2016 Congress & Exhibition, Hamburg, Germany, 9-13 October 2016. European Powder Metallurgy Association, USB.
3.2.
2016
Mural, Z., Kollo, L., Veinthal, R. (2016). Spark Plasma Sintered Nd-Fe-B Magnets from High-Energy Ball Milled Powders. The 24th International Workshop on Rare-Earth and Future Permanent Magnets and Their Applications (REPM 16), Darmstadt, Germany, 28.08-01.09.2016. Darmstadt, Germany: Technical University of Darmstadt and Fraunhofer IWKS, 619−623.
1.1.
2015
Kolnes, M.; Kübarsepp, J.; Kollo, L.; Viljus, M.. (2015). Characterization of TiC-FeCrMn cermets produced by powder metallurgy method. Materials Science, 21 (3), 353−357.10.5755/j01.ms.21.3.7364.
1.1.
2015
Aghayan, M.; Gasik, M.; Hussainova, I.; Rubio-Marcos, F.; Kollo, L.; Kubarsepp, J. (2015). Thermal and microstructural analysis of doped alumina nanofibers. Thermochimica Acta, 602, 43−48.10.1016/j.tca.2015.01.009.
1.1.
2015
Jõgiaas, T.; Kollo, L.; Kozlova, J.; Tamm, A.; Hussainova, I.; Kukli, K. (2015). Effect of Atomic Layer Deposited Aluminium Oxide on Mechanical Properties of Porous Silicon Carbide. Ceramics International, 41 (6), 7519−7528.10.1016/j.ceramint.2015.02.074.
3.1.
2015
Kallip, K.; Kollo, L.; Leparoux, M.; Bradbury, C. R. (2015). Nanoparticulate Reinforced Aluminum Alloy Composites Produced by Powder Metallurgy Route. In: Sano, T.; Srivatsan, T.S. (Ed.). Advanced Composites for Aerospace, Marine, and Land Applications II (165−174). Hoboken, New Jersey: John Wiley & Sons Ltd. DOI: 10.1002/9781119093213.ch12.
6.3.
2015
Jõeleht, M.; Kollo, L.; Pohlak, M.; Veinthal, R. (2015). Uued võimalused 3D-printimise valdkonnas- metallide printimine peagi võimalik ka Eestis. (32−35)..
1.1.
2014
Jõgiaas, T.; Arroval, T.; Kollo, L.; Kozlova, J.; Käämbre, T.; Mändar, H.; Tamm, A.; Hussainova, I.; Kukli, K. (2014). Atomic layer deposition of alumina on γ-Al2O3 nanofibers. physica status solidi (a), 211 (2), 403−408.10.1002/pssa.201330083.
1.1.
2012
Kollo, L.; Kallip, K.; Gomon, J.-K.; Kommel, L. (2012). Hot Consolidation of Aluminum and Aluminum nano-MMC Powders by Equal Channel Angular Pressing. Materials Science, 18 (3), 234−237.10.5755/j01.ms.18.3.2431.
1.1.
2011
Kollo, L.; Bradbury, C.; Veinthal, R.; Jäggi, C.; Carreño-Morelli, E.; Leparoux, M. (2011). Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidation. Materials Science and Engineering A, 528 (21), 6606−6615.10.1016/j.msea.2011.05.037.
1.1.
2010
Kollo, L.; Leparoux, M.; Bradbury, C.; Jäggi, C.; Carreño-Morelli, E.; Rodríguez-Arbaizar, M. (2010). Investigation of Planetary Milling for nano-Silicon Carbide Reinforced Aluminium Metal Matrix Composites. Journal of Alloys and Compounds, 489 (2), 394−400.10.1016/j.jallcom.2009.09.128.

Industrial property

15.01.2021