See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Lembit Kommel

https://etis.ee/CV/Lembit_Kommel/est
10.03.1944
372 6203356
5236513
lembit.kommel@taltech.ee

Teenistuskäik

Töökohad ja ametid
01.01.2017–31.05.2020   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Vanemteadur (0,50)
01.01.2014–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool, Vanemteadur (0,50)
1998–2013   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool, Vanemteadur (1,00)
01.01.1994–31.12.1998   
President, Kompanii "Saturn-Service", Vene föderatsioon
01.01.1993–31.12.1994   
Insener, Firma "ABB-Uniturbo", Vene föderatsioon
01.01.1992–31.12.1993   
Insener, AS "A.Lylka-Saturn", Vene föderatsioon
01.01.1989–31.12.1992   
Vaneminsener, Teaduslik-tehniline ühendus "Saturn", NSVL;
01.01.1986–31.12.1989   
Põhitööstuse tsehhiülem, Teaduslik-tehniline ühendus "Saturn", NSVL;
01.01.1984–31.12.1987   
Üleliidulise Patendinstituudi mittekoosseisuline ekspert
01.01.1973–31.12.1986   
Vanemmeister, Teaduslik-tehniline ühendus "Saturn", NSVL;
 
 
Haridustee
1981–1987   
Moskva terase ja sulamite instituut, Aspirantuur, Tehnikateaduste kandidaat, Materjalide- ja inseneriteadused
1979–1980   
Moskva aviatehnoloogia instituut, Metallide kuumtöötlemine survega
1969–1975   
Moskva Riiklik Avalik Ülikool, Sisepõlemismootorid
1961–1964   
Tallinna kalandustehnikum, NSVL
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2004−...   
TMS (Mineraalide, metallide ja materjalide) ühistu liige.

Kvalifikatsioon

Teaduskraadid
Lembit Kommel, doktorikraad, 1987, (juh) Akad. G.P. Teterin, Kuumuskindlate titaanisulamite ratsionaalsete elektristantsimise protsesside väljatöötamine ja juurutamine, Moscow Institute of Steels and Alloys.
 
 
Teaduspreemiad ja tunnustused
2002, Lembit Kommel, Väljapaistev plakat, Ülemaailmne pulbermetallurgia ja pulbermaterjalide kongress, 16-21 juuni 2002, Orlando, Florida, USA.
1987, Lembit Kommel, NSVL aviatööstuse akad. A. Lulka nimeline teaduspreemia
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS KLASSIFIKAATOR: T150 Materjalitehnoloogia
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus
 
 
Lisainfo
Nanometallide SPD tehnoloogiad, Funktsionaalse suunitlusega materjalide uurimine

Juhendamisel väitekirjad

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2021
Kommel, Lembit; Põdra, Priit; Mikli, Valdek; Omranpour, Babak (2021). Gradient microstructure in tantalum formed under the wear track during dry sliding friction. Wear, 466-467, 203573−88. DOI: 10.1016/j.wear.2020.203573.
1.1.
2020
Komme, L. (2020). Peculiarities of Microstructure Evolution and Property Changes of Titanium Alloys In Situ during Electric Forging. Materials Performance and Characterization, 9 (2), 75−88. DOI: 10.1520/MPC20190109.
1.1.
2019
Kommel, L.; Shahreza, B. O.; Mikli, V. (2019). Microstructure and physical-mechanical properties evolution of pure tantalum processed with hard cyclic viscoplastic deformation. International Journal of Refractory Metals and Hard Materials, 83, 104983−104993.10.1016/j.ijrmhm.2019.104983.
1.1.
2019
Omranpour, B.; Ivanisenko, Y.; Kulagin, R.; Kommel, L.; Garcia Sanchez, E.; Nugmanov, D.; Scherer, T.; Heczel, A.; Gubicza, J. (2019). Evolution of microstructure and hardness in aluminum processed by High Pressure Torsion Extrusion. Materials Science and Engineering A, 762, 138074.10.1016/j.msea.2019.138074.
3.1.
2019
Pramono, A.; Kollo, L.; Kommel, L.; Veinthal, R. (2019). High-strength aluminum alloy of ultrafine grained by consolidation-ECAP. IOP Conference Series: Materials Science and Engineering, 478 (1). IOP PUBLISHING LTD, #012035. DOI: 10.1088/1757-899X/478/1/012035.
3.1.
2019
Kommel, L.; Omranpour, B. S.; Mikli, V. (2019). Structuration of Refractory Metals Tantalum and Niobium Using Modified Equal Channel Angular Pressing Technique. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (103−108). Trans Tech Publications Ltd. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.103.
3.1.
2019
Omranpour, B. S.; Kommel, L.; Sanchez, E. G.; Ivanisenko, Y.; Huot, J. (2019). Enhancement of Hydrogen Storage in Metals by Using a New Technique in Severe Plastic Deformations. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (173−178). TRANS TECH PUBLICATIONS LTD. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.173.
1.1.
2016
Pramono, A.; Kommel, L.; Kollo, L.; Veinthal, R. (2016). The Aluminum Based Composite Produced by Self Propagating High Temperature Synthesis. Materials Science, 22 (1), 41−43. DOI: 10.5755/j01.ms.22.1.7500.
5.2.
2016
Kommel, L.; Kodess, B. N.; Kommel, L. I. (2016). Order change and phase's redistribution in single crystal of Ni-based superalloy during hard cyclic viscoplastic deformation. Acta Crystallographica Section A: Foundations and Advances, A72, 297.
3.1.
2015
Kommel, L.; Tarraste, M.; Kolnes, M.; Veinthal, R.; Kübarsepp, J. (2015).
 . Euro PM2015 Proceedings: Euro PM2015 Congress & Exibition - Heads to Reims, Champagne, France. Ed. EPMA. Reims, France: European Powder Metallurgy Association, x−x.
3.1.
2015
Pramono, Agus; Kommel, Lembit; Kollo, Lauri; Veinthal, Renno (2015). Hot and Cold of Pressing Effect on ECAP-Parallel Channel Composite Based on Al/ANF Material. Advanced Materials Research, 1123, 343−347. DOI: 10.4028/www.scientific.net/AMR.1123.343.
3.1.
2014
Kommel, L. (2014). Microstructure and Properties of UFG Metals and Alloys. NANO 2014, Moscow, Russian Federation, 13-18 July, 2014. Moscow University Press, xx−xx.
3.1.
2014
Kommel, L.; Pardis, N.; Kimmari, E. (2014). Micromechanical properties and electrical conductivity of CU and CU-0.7WT% CR alloy. Proceedings of the 9th international conference of DAAAM Baltic industrial engineering 24-26th April 2014, Tallinn, Estonia. Tallinn, 2014: 9th International DAAAM Baltic Conference "INDUSTRIAL ENGINEERING", 24-26 April 2014, Tallinn, Estonia. Tallinn University of Technology, 354−359.
5.2.
2014
Kommel, L. (2014). Microstructure and Micromechanical Properties of UFG Metals and Alloys Produced by Severe Plastic Deformation Techniques. NANO 2014, Moscow, July 13-18, 2014. Moscow: Moscow University Press, -.
3.1.
2013
Kommel, L.; Tamm, T.; Metsavahi, R. (2013). Effects of New Superhard Phases Formation on Properties of Composite Processed by SHS. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (137−142).. Trans Tech Publications Ltd. (Key Engineering Materials; 527).
1.1.
2012
Kommel, L.; Saarna, M; Traksmaa, R; Kommel, I. (2012). Microstructure, Properties and Atomic Level Strain in Severely Deformed Rare Metal Niobium. Materials Science, 18 (4), 330−335.10.5755/j01.ms.18.4.3091.
1.1.
2012
Kommel, L.; Kimmari, E.; Viljus, M.; Traksmaa, R.; Volobueva, o.; Kommel, I. (2012). Phases Micromechanical Properties of Ni-base Superalloy Mesured by Nanoindentation. Materials Science, 18 (1), 28−33.10.5755/j01.ms.18.1.1337.
1.1.
2012
Kollo, L.; Kallip, K.; Gomon, J.-K.; Kommel, L. (2012). Hot Consolidation of Aluminum and Aluminum nano-MMC Powders by Equal Channel Angular Pressing. Materials Science, 18 (3), 234−237.10.5755/j01.ms.18.3.2431.
3.1.
2012
Kommel, Lembit; Metsvahi, Raido; Viljus, Mart; Kimmari, Eduard; Kolju, Karl; Traksmaa, Rainer (2012). Design of Superhard c-BC2N-precipitates in B4C/Al-composites through SHS and Heat Treatment. Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering : 19-21st April 2012, Tallinn, Estonia., II: 8th International DAAAM Baltic Conference "INDUSTRIAL ENGINEERING" 19-21 April 2012, Tallinn, Estonia. Ed. T. Otto. Tallinn University of Technology, 645−650.
3.1.
2012
Kommel, L.; Metsvahi, R.; Mihhaltsenkov, M. (2012). Production Technology Elaboration and Characterization of Al-MWCNT, Al-Fullerenes and Al-B4C Composites. Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering : 19-21st April 2012, Tallinn, Estonia., II. _EditorsAbbr T. Otto. Tallinn University of Technology, 651−656.
3.1.
2011
Kommel, L.; Mikli, V.; Traksmaa, R.; Saarna, M.; Pokartilov, A.; Pikker, S.; Kommel, I. (2011). Influence of the SPD Processing Feartures on the Nanostructure and Properties of a Pure Niobium. Nanomaterials by Severe Plastic Deformation: NanoSPD5, 2: 5th International Conference on Nanomaterials by Severe Plastic Deformation held in Nanjing, China on March 21-25, 2011. Ed. Jing Tao Wang, Roberto B. Figueiredo, Terence G. Langdon. Trans Tech-Scitec Publications Ltd, 785−790. (Materials Science Forum ; 667-669). DOI: 10.4028/www.scientific.net/MSF.667-669.785.
1.1.
2010
Kommel, L. (2010). Properties development of ultrafine-grained copper under hard cyclic viscoplastic deformation. Materials Letters, 64 (14), 1580−1582.10.1016/j.matlet.2010.04.056.
1.2.
2010
Kommel, L. (2010). Microstructure evolution in titanium alloys enforced by Joule heating and severe plastic deformation concurrently. Journal of Manufacturing Technology Research, 2, 59−76.
3.1.
2010
Kommel, L.; Straumal, B. (2010). Diffusion in SC Ni-base Superalloy under Viscoplastic Deformation. Diffusion in Solids and Liquids V: Fifth International Conference on Diffusion in Solids and Liquids : DSL-2009, Rome, Italy, 24th-26th June, 2009. Ed. Andreas Öchsner, Graeme E. Murch, Ali Shokuhfar and João M.P.Q. Delgado. Trans Tech Publications Ltd, 1340−1345. (Defect and Diffusion Forum; 297-301).10.4028/www.scientific.net/DDF.297-301.1340.
3.1.
2010
Kommel, L. (2010). New technique for characterization of microstructure of the nickel-base superalloy. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, II: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. _EditorsAbbr R. Küttner. Tallinn University of Technology Press, 498−503.
3.2.
2010
Kommel, L.; Kollo, L. (2010). Production of Hard Refractory Compounds on Base of Aluminium and Boron Carbide Powders. Proceedings of World Powder Metallurgy Congress and Exhibition PM2010, 2: World Powder Metallurgy Congress and Exhibition PM2010, Florence, Italy 10-14 October 2010. Schrewsbury, UK: European Powder Metallurgy Association, 337−343.
3.2.
2010
Kollo, L.; Leparoux, M.; Bradbury, C. R.; Kommel, L.; Carreno-Morelli, E.; Rodriguez-Arbaizar, M. (2010). Hardness of Hot Consolidated Al-SiC Nanocomposites from Planetary Milled Powders. Proceedings of World Powder Metallurgy Congress and Exhibition PM2010, 1: World Powder Metallurgy Congress and Exhibition PM2010, Florence, Italy 10-14 October 2010. Schrewsbury, UK: European Powder Metallurgy Association, 341−346.
1.1.
2009
Kommel, L. (2009). Viscoelastic Behavior of a Single-Crystal Nickel-Base Superalloy. Materials Science (Medžiagotyra), 15 (2), 123−128.
5.2.
2009
Kommel, L.; Dobatkin, S.; Straumal, B.; Kommel, I.; Kuznetsov, A. (2009). Structure Evolution of Submicrocrystalline Copper during Cyclic Deformation. Bulk Nanostructured Materials: From Fundamentals to Innovations. R.Z. Valiev (ed.) USATU, Ufa, Russia, 2009, p. 237-238.: 2nd Internationa Symposium on Bulk Nanostructured Materials: From Fundamentals to Innovations (BNM2009), Ufa, Russia Sept. 22-26, 2009, Ufa, Russia.. Russian Academy of Sciences, 237−238.
1.1.
2008
Kommel, L.; Rõzkina, A.; Vlasieva, I. (2008). Microstructural features of ultrafine grained copper under severe deformation. Materials Science (Medžiagotyra), 14 (3), 206−209.
1.1.
2008
Kommel, L.; Laev, N. (2008). Mechanism for single crystal refinement in high purity niobium during equal-channel angular pressing. Materials Science (Medžiagotyra), 14 (4), 319−323.
1.1.
2008
Kommel, Lembit; Kimmari, Eduard (2008). Multiphase Forming in Lightweight Composites during SHS Reaction. Materials Science (Medžiagotyra), 14 (3), 242−246.
1.2.
2008
Kommel, L.; Rozkina, A.; Vlasieva, I. (2008). Relationship of strength and durability of nanometls. Latvijas Kimijas Žurnals (Latvian Journal of Chemistry), 1, 55−60.
3.1.
2008
Kommel, L. (2008). Metals microstructure improving under hard cyclic viscoplastic deformation. In: Nanomaterials by Severe Plastic Deformation (349−354).. Trans Tech Publications Ltd. (Materials Science Forum; 584-586).
3.1.
2008
Kommel, L. (2008). UFG microstructure processing by ECAP from double electron-beam melted rare metal. In: Nanomaterials by Severe Plastic Deformation (349−354).. Trans Tech Publications Ltd. (Materials Science Forum ; 584-586).
3.1.
2008
Kimmari, E.; Kommel, L. (2008). Thermally induced cracking in aluminum/boron carbide composite. In: Kütner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (467−472).. Tallinn: Tallinn University of Technology.
3.1.
2008
Kommel, L.; Kimmari, E. (2008). Multiphase microstructure forming purpose in lightweight composites. Proceedings of thd 6th International Conference of DAAAM Baltic, Industrial Engineering, 2: Thd 6th International Conference of DAAAM Baltic, Industrial Engineering, 24-26th April 2008, Tallinn, Estonia. Ed. R. Küttner. Tallinn University of Technology, 479−484.
3.1.
2008
Kommel, L.; Kimmari, E. (2008). Solid phase`s transformations in boron carbide based composites during heat treatment. Čermák, J.; Stloukal, I. (Toim.). Solid Phase Transformations (175−180).. Trans Tech Publications Ltd. (Solid State Phenomena; 138).
3.2.
2008
Juhani, K.; Kimmari, E.; Kommel, L. (2008). Preparation of Multiphase Ligthweigth c-BN-Based Composite. Proceedings of Euro PM2008, 1: European Powder Metallurgy Conference & Exhibition Euro PM2008, Mannheim, Germany, 28.09-1.10.2008. European Powder Metallurgy Association, 231−236.
1.1.
2007
Kommel, L; Hussainova, I; Volobujeva, O. (2007). Microstructure and properties development of copper during severe plastic deformation. Materials & Design, 28 (7), 2121−2128.
5.2.
2007
Kommel, L.; Kimmari, E. (2007). Wear resistance behavior of light-weight composites. Abstracts of the XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007: XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007, October 25-26, Riga, Latvia. Ed. Grabits, J.; Krastins, J. Riga: Riga Technical University, 22.
5.2.
2007
Kommel, L. (2007). Diffusion and phase transformation in SC superalloys aided by HCV deformation. Abstracts of the XVI-th International Baltic Conference "Engineering Materials & Baltmattrib" *2007: XVI-th International Baltic Conference "Engineering Materials & Baltmattrib" *2007, October 25-26, Riga, Latvia. _EditorsAbbr Grabits, J.; Krastins. J. Riga: Riga Technical University, 11.
5.2.
2007
Kommel, L. (2007). Relationship of strength and durability of nanometals. Abstracts of the XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007": XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007, October 25-26, 2007, Riga, Latvia. _EditorsAbbr Grabits, J.; Krastins, J. Riga: Riga Technical University, 10.
5.2.
2007
Kommel, L. (2007). A Study on Hard Cyclic Viscoplastic Deformation Behavior of Bulk UFG Metals. Int. symp. Bulk Nanostructured Materials: from fundamentals to innovations, BNM-2007, Ufa State Aviation Technical University, 14-18 August, 2007. _EditorsAbbr Valiev, R.Z; Langdon, T.G. 262−263.
1.1.
2006
Kommel, L. (2006). Diffusion in the interface region of Ti/TiAl-Nb bonding. Defect and Diffusion Forum, 249, 193−200.
1.2.
2006
Kommel, L.; Kimmari, E. (2006). Boron carbide based composites manufacturing and recycling features. Materials Science, 12 (1), 48−52.
1.2.
2006
Kommel, L.; Kommel, I. (2006). Damage evolution of structure and fracture of nanocrystalline copper at cyclic deformation. Deformation & Fracture of Materials, I, 411−414.
1.2.
2006
Kimmari, E.; Kommel, L. (2006). Application of the continuous indentation test method for the characterization of mechanical properties of B4C/Al composites. Proceedings of the Estonian Academy of Sciences. Engineering, 4, 399−407.
3.1.
2006
Kimmari, E.; Kommel, L. (2006). Dry Sliding Friction of Cubic Boron Nitride Based Composite Synthesized by SHS. 12th Nordic Tribology Symposium NORDTRIB 2006, Helsingor, Denmark, 6-9 June 2006.
5.2.
2006
Kommel, L; Hussainova, I.; Nisumaa, R., Volobujeva, O. (2006). Structural behavior and damage evolution of nanocrystalline copper at HCV deformation. Book of abstracts of Int. Conference on Engineering Materials and Tribology, BALTMATTRIB-2006, October, 5-6, 2006, Tallinn, Estonia: Int. Conference on Engineering Materials and Tribology, BALTMATTRIB-2006, October, 5-6, 2006, Tallinn, Estonia. 40−41.
5.2.
2006
Kimmari, Eduard; Kommel, Lembit (2006). The use of continuous indentation test method for characterization of mechanical properties of B4C/Al composites. Engineering Materials and Tribology BALTMATTRIB 2006: 15th International Baltic Conference Engineering Materials and Tribology BALTMATTRIB 2006, Tallinn, Estonia, October 5-6, 2006..
5.2.
2006
Kommel, L.; Hussainova, I.; Nisumaa, R.; Volobujeva, O. (2006). Structural behaviour of NC copper at hard cyclic viscoplastic deformation. Ultrafine Grained Materials - from Basics to Applications: UFG- 2006, September, 25-27, 2006, Kloster Irsee, Germany. Germany: Russian Association for Artificial Intelligence, 6-16−6-17.
5.2.
2006
Kommel, L.; Hussainova, I.; Veinthal, R.; Saarna, M. (2006). Stability and damage of nanocrystalline copper at cyclic elastic-plastic deformation. Ultrafine Grained Materials - from Basics to Applications: UFG - 2006, September 25 - 27, 2006, Kloster Irsee, Germany. Germany, 3-17−3-19.
1.1.
2005
Kommel, L.; Veinthal, R (2005). HCV deformation - Method to study the viscoplastic behavior of nanocrystalline metallic materials. REVIEWS ON ADVANCED MATERIALS SCIENCE, 10 (5), 442−446.
1.1.
2005
Kommel, L.; Hussainova, I.; Traksmaa, R (2005). Characterization of the viscoplastic behavior of nanocrystalline metals at HCV deformation. REVIEWS ON ADVANCED MATERIALS SCIENCE, 10 (5), 447−453.
1.1.
2005
Hussainova, I.; Kommel, L.; Lohmus, R.; Volobujeva, O. (2005). Microscopic characterization of surface morphology of nanostructured copper. REVIEWS ON ADVANCED MATERIALS SCIENCE, 10 (3), 266−271.
1.2.
2005
Kommel, Lembit; Kimmari, Eduard (2005). Investigations of structure and tribological properties of the lightweight c-BN-based composites. Materials Science, 11 (4), 394−397.
1.2.
2005
Kommel, L. (2005). Evolution of microstructure and properties of heat-proof superalloy enforced by electrical upsetting forging. Deformatcija i Razrushenie Materialov (Deformation and Fracture of Materials), 3, 21−27.
1.2.
2005
Kommel, L.; Hussainova, I.; Volobueva, O. (2005). Strength and plasticity of nanocrystalline copper. Deformatsija i razrushenie (Deformation and fracture of Materials), 11, 17−23.
1.2.
2005
Kommel, L.; Hussainova, I.; Volobujeva, O.; Lohmus, R. (2005). Microstructural evolution and mechanical properties of nanostructured copper. Proceedings of the Estonian Academy of Sciences. Engineering, 11 (3), 187−197.
3.4.
2005
Kommel, L. (2005). Structural optimization of titanium alloys by electric upset froging. Proceedings of the First International Conference on Modeling, Simulation and Applied Optimization (ICMSAO'05), Sharjah, School of Engineering, American University of Sharjah, United Arab Emirates.1-3 February 2005: First International Conference on Modeling, Simulation and Applied Optimization (ICMSAO'05), Sharjah, 1-3 February 2005. _EditorsAbbr Sadek, I.; Kucuk, I. Sharjah, United Arab Emirates,.
5.1.
2005
Hussainova, I.; Kommel, L.; Lyhmus, R.; Lyhmus, A. (2005). AFM characterization of surface morphology of nanaostructured copper. Abstacts of the 2nd International Conference "Nanomaterials and Nanotechnologies" Crete, Greece, 14-18 June 2005: 2nd International Conference "Nanomaterials and Nanotechnologies" Crete, Greece, 14-18 June 2005. , 60.
5.1.
2005
Kommel, L.; Hussainova, I. (2005). Hard cyclic viscoplastic (HCV) deformation - method for testing of the nanocrystalline metallic materials behavior. Abstracts of the 2nd International Conference "Nanomaterials and Nanotechnologies", Crete, Greece, 14-18 June 2005: 2nd International Conference "Nanomaterials and Nanotechnologies", Crete, Greece, 14-18 June 2005. Greece, 55.
5.1.
2005
Kommel, L.; Hussainova, I. (2005). Nanocrystalline metallic materials viscoplastic behavior characterization by HCV deformation. Abstracte of the 2nd International Conference "Nanomaterials and Nanotechnologies, Crete, Greece, 14-18 June 2005: 2nd International Conference "Nanomaterials and Nanotechnologies, Crete, Greece, 14-18 June 2005. Greece, 39.
5.2.
2005
Kommel, L. (2005). Diffusion and phase transformation influences on life extension of superalloys. Abstracts book of the International Conference "Diffusion in solids: Past, present and future" DiSo-05, Moscow, Russia, 23-27 May: International Conference "Diffusion in solids: Past, present and future" DiSo-05, Moscow, Russia, 23-27 May. Moscow State University Press, 28.
5.2.
2005
Hussainova, Irina; Kommel, Lembit; Lõhmus, Rynno; Lõhmus, Ants (2005). Mechanical behavior of nanostructured copper produced by SPD method. Proceedings of Int. Conference “Modern materials science: Achievements and Problems”: Int. Conference “Modern materials science: Achievements and Problems”,Kiev, Ukraine, September 26 – 30, 2005. Ukraine, 664−665.
5.2.
2005
Lõhmus, R.; Hussainova, I.; Kommel, L; Siimon, H. (2005). AFM analysis of nano-copper surface morphology [electronic resource]. In: Swadener, J.G; Lilleodden, E; Asif, S; Bahr, D; Weygand, D. (Ed.). Mechanical Properties of Nanostructured Materials - Experiments and Modeling : Proceedings of Material Research Society Spring Meeting, March 28 – April 1, 2005, San Francisco, CA, USA (-).. Warrendale, USA: Materials Research Society. (MRS Proceedings ; 880E ).
5.2.
2005
Lohmus, R.; Hussainova, I.; Vesi, U.; Nisumaa, R.; Kommel, L. (2005). Microscopic study on structural features of nanocrystalline copper. Proceedings of NANO'05 Conference: NANO'05 Conference, Brno, Czech Republic, November 8 - 10, 2005.
5.2.
2005
Kommel, L.; Kübarsepp, J.; Hussainova, I.; Kimmari, E. (2005). Structure and properties of boron nitride based composite - produced by SHS method. Proc. of Fifth International Conference on Composite Science and Technology (ICCST/5): Fifth International Conference on Composite Science and Technology (ICCST/5), 1-3 February 2005 Sharjah, United Arab Emirates,School of Engineering, American University of Sharjah. Unaited Arab Emirates, 461−466.
5.2.
2005
Kommel, L. (2005). Phase transformations in titanium alloys by rapid electric conduction heating with SPD. Book of abstracts of 10th International Symposium on Physics of Materials : ISPMA10 : August 30 - September 2, 2005, Prague, Czech. Republic: 10th International Symposium on Physics of Materials, ISPMA 10; Prague, Czech Republic, 30.8. - 2.9. 2005. Prague, Czech Republic, 31.
5.2.
2005
Kommel, L. (2005). Grain boundary phase transformations in superalloys. In: Book of abstracts: 10th International Symposium on Physics of Materials : ISPMA10 : august 30 -September 2, 2005, Prague, Czech Republic (30).. Prague, Czech Republic: Charles University.
5.2.
2005
"Hussainova, Irina;Lõhmus, Rünno;Kommel, Lembit;Siimon, H." (2005). AFM characterization of the surface morphology of the severe plastic deformed copper [Electronic resource]. TTY puuduv kirjastus,.
5.2.
2005
Kommel, L. (2005). Nanosructured copper manufacturing features and mechanical/physical properties forming. Nanopowders, Nanostructured Materials and Coatings : Network for Nanostructured Materials of ACC : March 17, 2005, Tallinn, Estonia : book of abstracts. Tallinna Tehnikaülikooli Kirjastus, 22−24.
5.2.
2005
Kommel, L. (2005). Diffusion in the interface region of Ti/TiAl-Nb bonding. Abstracts Book of the International Conference "Diffusion in solids: Past, present and future" DiSo-05, Moscow, Russia, 23-27 Mai, 2005: International Conference "Diffusion in solids: Past, present and future, Moscow, Russia, 23-27 Mai, 2005. Moscow State University Press, 29.
5.2.
2005
Kommel, L. (2005). Grain boundary phase transitions in superalloys. The Book of Abstracts "10th International Symposium on Physics of Materials" ISPMA 10, 30.8. - 2.9.2005, Prague, Czech Republic: 10th International Symposium on Physics of Materials, Prague, 30.8. - 2.9.2005.
5.2.
2005
Hussainova, I.; Kommel, L.; Kübarsepp, J.; Kimmari, E. (2005). Tribological properties of boron nitride based composites. Proceedings of the WTC2005 World Tribology Congress III - 2005: World Tribology Congress III - 2005, September 12-16, 2005, Washington, D.C. (USA). ASME Publications, 53−54.
3.1.
2004
Kommel, L. (2004). The effect of HCV deformation on hardening/softening of SPD copper. Ultrafine Grained Materials, III: 3rd International Symposium on Ultrafine Grained Materials, Charlotte, NC, MAR 15-17, 2004. _EditorsAbbr Zhu, Y.T.; Langdon, T.G.; Valiev, R.Z. TMS (The Minerals, Metals & Materials Society), 571−576.
3.1.
2004
Kommel, L.; Kübarsepp, J.; Veinthal, R.; Traksmaa, R. (2004). Fabrication, Control and Properties of Nanocrystalline Copper. In: Champion, Y.; Fecht, H-J. (Ed.). Nano-Archidectured and Nanostructured Materials : Fabrication, Control and Properties (27−37). . Weinheim: Wiley-V C H Verlag Gmbh.
3.4.
2004
Kommel, L.; Kimmari, E. (2004). Recycling of light weight B4C based composites. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn, Estonia: 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn. Tallinn: Tallinn University of Technology, 199−202.
5.1.
2004
Kommel, L.; Kybarsepp, J.; Hussainova, I. (2004). Boron Nitride Based Composite Structure and Properties manufactured by SHS with Hot Compaction. Abstracts of the 8th International Conference on the Science of Hard Materials, ICSHM8, San Juan, USA, 2004: 8th International Conference on the Science of Hard Materials, San Juan, USA, 2004. USA.
5.2.
2004
Kommel, L.; Hussainova, I. (2004). Strength and plasticity of nanocrystalline copper. Proc. of 3rd Int. Conference on Phase Transformation and Strength of Crystals: 3rd Int. Conference on Phase Transformation and Strength of Crystals. Chernogolovka, Russia, September 20 - 24, 2004. Russia.
5.2.
2004
Kommel, L. (2004). Effect of Elektroupsetting Forging on Microstructure and Properties of Advanced Superalloys. III International Conference “Phase Transformation and Strength of Crystals”. 20-24 September 2004, Chernogolovka, Russia: III International Conference “Phase Transformation and Strength of Crystals”, Chernogolovka, 20-24 September 2004. Moscow State University Press, 47.
5.2.
2004
Kommel, L. (2004). New advanced technologies for nanocrystalline metals manufacturing. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn, Estonia: 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn. Tallinn: Tallinn University of Technology, 195−198.
1.2.
2003
Kommel, L.; Kimmari, E. (2003). Friction and wear changes of boron carbide cermets depending on the structure. Materials Science, 1, 51−53.
1.2.
2003
Kommel, L.; Veinthal, R.; Kimmari, E. (2003). The Formation of Structure and Change of Properties during Heat Treatment of Boron Carbide Cermets. Materials Science, 9 (1), 99−101.
1.2.
2003
Kommel, L.; Traksmaa, R.; Kimmari, E. (2003). Influence of binder composition and microhardness on wear properties of lightweight composites. Powder metallurgy progress, 3 (3), 140−145.
3.1.
2003
Kommel, L.; Kübarsepp, J.; Klaasen, H. (2003). Boron carbide based composites microstructure and properties relationships to processing features. Proceedings of European Powder Metallurgy Conference - Challenges of a Changing Market, 2: European Powder Metallurgy Conference - Challenges of a Changing Market, October 20-22, 2003, Valencia (Spain). Shrewsbury, UK: European Powder Metallurgy Association, 87−92.
3.4.
2003
Kommel, L.; Traksmaa, R.; Kimmari, E. (2003). Influence of Binder Composition and Microhardness on Wear Properties of Light Weight Composites. Proceedings of the International Conference EUROMAT 2003, Lausanne, Switzerland, 01-05. September 2003: International Conference EUROMAT 2003, Lausanne, Switzerland, 01-05. September 2003.
5.2.
2003
Kenk, K.; Kommel, L.; Veinthal, R. (2003). Viscoplastic Behavior of SPD Copper. 12th international Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : October 2-3, 2003, Tallinn, Estonia : abstracts: Engineering materials and tribology. Baltmattrib-2003, international Baltic conference, Tallinn, October 2-3, 2003. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 47−48.
5.2.
2003
Kommel, L.; Kimmari, E. (2003). Formation of the Nanomeasures Refractory Compounds in the B4C Based Composites and Their Influence on Wear Resistance. Proceedings of the Joint Nordic Conference in Powder Technology, February 5-6, 2003 in Tampere, Finland: Joint Nordic Conference in Powder Technology, Tampere, February 5-6, 2003. Tampere University of Technology,.
5.2.
2003
Kommel, L.; Kimmari, E.; Traksmaa, R. (2003). Effect of attrition milling on grain size and properties of composites. 12th International Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : October 2-3, 2003, Tallinn, Estonia : abstracts: Engineering materials and tribology: Baltmattrib-2003, international Baltic conference, Tallinn, October 2-3, 2003. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 25.
5.2.
2003
Kommel, L. (2003). Microstructure and Microhardness Characteristics in the Interface Region of Ti/TiAl-Nb diffusion bonding. 12th international Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : October 2-3, 2003, Tallinn, Estonia : abstracts: Engineering materials and tribology: Baltmattrib-2003, international Baltic conference, Tallinn, October 2-3, 2003. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 56.
1.2.
2002
Kommel, L.; Kenk, K.; Veinthal, R. (2002). The copper structure and properties evolution in zone of severe plastic deformation. Materials Science, 4, 396−398.
1.2.
2002
"Kommel, Lembit;Hussainova, Irina;Kimmari, Eduard" (2002). The structure and properties forming in boron carbide aluminium composites during processing. 6. USA: Metal Powder Industry Federation, 182−187.
3.1.
2002
Kommel, L.; Kenk, K.; Veinthal, R. (2002). Influence of SPD on Structure and Properties of Copper. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME", DAAM : 25-27 April 2002, Tallinn, Estonia: 3rd International Conference "Industrial Engineering - New Challenges to SME", DAAM : 25-27 April 2002, Tallinn. Tallinn: Tallinn Technical University, 161−164.
3.1.
2002
Kommel, L.; Kimmari, E. (2002). The Formation of Wear Resistant Properties of Boron Carbide Cermet. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME", DAAAM : 25-27 April 2002, Tallinn, Estonia: 3rd International Conference "Industrial Engineering - New Challenges to SME", Tallinn, 25-27 April 2002. Tallinn: Tallinn Technical University, 165−168.
3.4.
2002
Kommel, L.; Traksmaa, R.; Kimmari, E. (2002). The Influence of Refractory Compositions in Binder Phase on Wear Properties of Boron Carbide/Aluminium Composites. Proceedings of the 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002 : [CD-ROM]: 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002. Stockholm, 11.
5.1.
2002
Kommel, Lembit; Hussainova, Irina; Kimmari, Eduard (2002). The structure and properties forming in boron carbide/aluminium composite during processing. Advances in Powder Metallurgy and Particulate Materials: Hard Metals/ Refractory metals/ Composite, 6. Metal Powder Industry Publications, 8−15.
5.2.
2002
Kommel, L.; Kenk, K.; Veinthal, R. (2002). Viscoplastic Behaviour of SPD Copper. Book of Abstracts: 2nd International Conference on Nanomaterials by Severe Plastic Deformation, Fundamentals-Processing-Applications, Dec. 9-13, 2002: 2nd International Conference on Nanomaterials by Severe Plastic Deformation, Fundamentals-Processing-Applications, Dec. 9-13, 2002. University of Vienna, Materials Physics Institute.
5.2.
2002
Kommel, L.; Traksmaa, R.; Kimmari, E. (2002). The Influence of Refractory Compositions in Binder Phase on Wear Properties of Boron Carbide/Aluminium Composites. Keynotes and Abstracts the 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002: 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002. 97.
3.2.
2001
Kommel, L.; Kimmari, E. (2001). The Influence of Binder Phase Status on the Wear Resistance of Boron Carbide Cermet by Friction. Proceedings of the X-th International Baltic Conference, Materials Engineering & Balttrib 2001, September 27-28, Jurmala, Latvia: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, 2001, September 27-28. , 202−206.
3.4.
2001
Kommel, L. (2001). The Influence of Development of New Technology and materials on Resource of Gas Turbine Engines. Proceedings of BALTICA-2001, International Conference on Condition & Life Management for Power Plants, 1: BALTICA-2001, International Conference on Condition & Life Management for Power Plants, Helsinki, 06-08 June 2001. Helsinki: Finnish Forest Research Institute, 173−184.
3.4.
2001
Kommel, L.; Veinthal, R. (2001). The Investigation of Advanced Constructional Materials and Manufacturing Technologies. X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, Latvia, 2001, September 27-28. Riga Technical University, 41−45.
3.4.
2001
Kommel, L.; Peetsalu, P.; Veinthal, R. (2001). Evolution of Microstructure and Properties in Ti-alloys During Rapid Electrocontact Heating with SPD. Proceedings of the X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, 2001, September 27-28. Riga Technical University, 62−66.
3.4.
2001
Kommel, L. (2001). The Plastic Flow of alloys in Zone of Angular Deformation by Electroupsetting Forging. X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, Latvia, 2001, September 27-28. Riga, Latvia: Riga Technical University, 67−71.
5.2.
2001
Kommel, L.; Viljus, M. (2001). Structure and Properties Evolution of Superalloy in Zone of Uniform deformation by Electroupsetting. Euromat-2001 : 7th European Conference on Advanced Materials and Processes: Euromat-2001, Rimini, Italy, 10-14 June 2001. Italian Physical Society, 402.
5.2.
2001
Kommel, L.; Hussainova, I.; Kimmari, E. (2001). Wear and Friction in Boron Carbide Cermet-Steel Sliding System. WTC 2001 : [CD-ROM]: WTC 2001, Vienna, Austria, 03-07 September 2001. University of Vienna, 93.
5.2.
2001
Kommel, L.; Traksmaa, R. (2001). The Characterization of TiAl Intermetallics after Rapid Solidification by IFFM Technique. EUROMAT 2001, 7th European Conference on Advanced Materials and Processes: EUROMAT 2001, Rimini, Italy, 10-14 June 2001. Rimini, Italy, 339−340.
6.7.
2001
Kommel, L.; Kurik, L.; Traksmaa, R. (2001). Evolution of the Characteristics of Light Weight Boron Carbide Cermet after Heat Treatment. Proceeding of the International Conference Euromat-2001, Rimini, Italy : [CD-ROM]: International Conference Euromat-2001, Rimini.
1.2.
2000
"Kommel, Lembit;Teterin, G.;Traksmaa, Rainer" (2000). Increase of life extension compressor blades of the turbo-jet by electroupsetting. In: Advances in Mechanical Behaviour, Plasticity and Damage (1143−1148).. Amsterdam: Elsevier.
3.1.
2000
Kommel, L.; Pirso, J.; Traksmaa, R. (2000). The Light Weight Boron Carbide Cermet as Tribomaterial. Proceedings of the 9th Nordic Symposium on Tribology, NORDTRIB 2000, 3: 9th Nordic Symposium on Tribology, NORDTRIB 2000, Porvoo, 11-14 June 2000. _EditorsAbbr Anderson, P.; Ronkainen, H.; Holmberg, K. Espoo: Technical Research Centre of Finland, 886−895. (VTT SYMPOSIA ).
3.5.
2000
Letunovitš, S.; Kommel, L.; Viljus, M.; Pirso, J. (2000). Characterization of TiC Powders Milled by Attrition Technique. Proceedings of the 2nd International Conference, 27-29th April 2000, Tallinn, Estonia: Danube Adria Association for Automation and Manufacturing, 2nd international conference, Tallinn, 27-29th April 2000. Tallinn: Tallinn Technical University, 153−156.
5.2.
2000
Kommel, L.; Traksmaa, R. (2000). The Metal Ceramic Boron Carbide Light Alloy Produced by Powder Technology. Proceedings of the Joint Nordic Conference in Powder Technology, Stockholm, 2000: Joint Nordic Conference in Powder Technology, Stockholm, 2000. Westmanska Palatset, 37.
1.2.
1999
Kodess, B.;Teterin, G.; Kommel, L.; Ovcharov, V. (1999). Structure and mechanical properties of the engine valves with intermetallic disk. Journal of Materials Research, 652−657.
3.2.
1999
Kodess, B.; Teterin, G.; Kommel, L.; Ovcharov, V. (1999). Structure and mechanical propertiesof the engine valves with intermetallic disk. Proceedings of Materials Research Society Fall Meeting: Materials Research Society Fall Meeting, Boston, November 30 - December 3, 1998. Materials Research Society, kk8.37.1−kk8.37.5. (Materials Research Society symposium proceedings; 554).
3.4.
1999
Kommel, L. (1999). Microstructural control of TiAl intermetallic alloys. In: VIII-th International Baltic Conference, Materials Engineering-99 (121−124).. Kaunas, Lithuania: Kaunas Technologija.
3.4.
1999
Kommel, L. (1999). Impact fused-forging modeling technique. In: VIII-th International Baltic Conference, Materials Engineering-99 (117−120).. Kaunas, Lithuania: Kaunas Technologija.
3.4.
1999
Kommel, L. (1999). Titaani alumiinid kui järgmise sajandi konstruktsioonimaterjalid masinaehituses. IV Foreign-Estonian Congress: IV Foreign-Estonian Congress, Tallinn, Estonia, June 29-30, 1999. Tallinn: Välis-Eesti Ühing, 89−90.
5.2.
1999
Kommel, L.; Teterin, G.; Kodess, B. (1999). Microstructure control of titanium aluminides intermetallic by impact fused-forging modelling. Investigation and Application of Severe Plastic Deformation: Investigation and Application of Severe Plastic Deformation, Moscow, Russia, 2-7 August 1999. _EditorsAbbr Lowe T.C.; Valiev R.Z. Kluwer Academic Publishers, 79−79.
5.2.
1999
Kommel, L.; Teterin, G. (1999). Microstructure evolution in Ti-alloys during severe plastic deformation by electric upset forging. Proceedings of the NATO Advanced Research Workshop. Investigations and Applications of Severe Plastic Deformation: Investigation and Application of Severe Plastic Deformation, Moscow, Russia, 2-6 August, 1999. Kluwer Academic Publishers, 78.
5.2.
1999
Kommel, L. (1999). Исследование структуры и свойств Ti-Al-Nb сплава. Современные материалы, технологии, оборудование и инструменты в машиностроении (67).. ИФМ АН Украины.
5.2.
1999
Kommel, L. (1999). Исследование механизма структурообразования в титановых сплавах при электровысадке. Современные материалы, технологии, оборудование и инструменты в машиностроении (Наука - производству - 99) (66).. Киев, Украина: ИФМ АН Украины.
5.2.
1999
Kommel, L. (1999). Исследование зоны соединения металлов в биметаллических деталях, полученные импульсной жидко-штамповой формовкой. Современные материалы, технологии, оборудование и инструменты в машиностроении (65).. Киев, Украина: ИФМ АН Украины.
5.2.
1999
Kommel, L.; Ovcharov, V.; Kodess, B.; Teterin, G.; Kisel, N.; Ermolova, M. (1999). Structure and mechanical properties of TiAl. Proceedings of IUCr99: International Conference IUCr99, Glasgow (Ingland), August 08. 1999. Ingland: University of Glasgow, 2219. (Abstract Number 2219).
1.2.
1998
Kommel, L.; Teterin, G. (1998). Electric upset forging of preforms for compressor short blades stamping. Kuznechno-Shtampovochnoe Proizvodstvo, 10, 18−22.
1.2.
1998
Kommel L.A., Teterin G.P. (1998). Electric upset forging of titanium blanks with regulated structure and properties. Kuznechno-Shtampovochnoe Proizvodstvo, 8, 35−40.
6.1.
1996
Kommel, L. (1996). Штамповка на электро-высадочных машинах. Manuilov, V.F.; Beljanin, P.N.. Машиностроение: Энциклопедия (140−143).. Moskva: Машиностроение.
6.7.
1991
Kommel, L. (1991). Способ изготовления металлокерамических изделий и контейнер для их изготовления. Патент No 1836190.. Moscow, USSR: Патент.
1.2.
1988
Teterin, G.; Kommel, L. (1988). Choice of electrical upseting process rational parameters of titanium preforms. Kuznechno-Shtampovochnoe Proizvodstvo, 2, 14−16.
2.3.
1987
Kommel, L. (1987). Разработка и внедрение рациональных процессов электровысадки заготовок из жаропрочных титановых сплавов. (Всесоюзный ордена трудового красного знамени заочный политехнический институт). Москва: Moscow State University.
1.2.
1985
Teterin, G.; Kommel, L. (1985). Study of electric upseting forging process of preforms from heat proof titanium alloy of VT18U. Izvestija vuzov. Mashinostroenie, 9, 133−137.
1.2.
1985
Teterin, German; Kommel, Lembit (1985). The peculiarities of elctrical upseting of preforms from titanium alloys. Kuznechno-Shtampovochnoe Proizvodstvo, 7, 10−14.
1.2.
1985
Kommel, L. (1985). Discrepancy of electric upset forging of blank from titanium alloys. Kuznechno-Shtampovochnoe Proizvodstvo, 7, 10−14.
1.3.
1985
Kommel, L.; Teterin, G. (1985). Production of low-defective details from titanium alloys by electric upset forging. The technology of light alloys, 5, 31−36.
5.2.
1984
Kommel, L.; Teterin , G. (1984). Influence of thermal processes of electrocontact upsetting on details quality from titanium alloys. Proc. of the 6th All Sovet Union Conference "Physics of Heat of Technological Processes, 10-12 Okt. 1984, Taskent, Uzbecistan: 6th All Sovet Union Conference "Physics of Heat of Technological Processes, 10-12 Okt. 1984, Taskent, Uzbecistan. Taskent, USSR, Uzbekistan, 73. (3).
6.7.
1984
Kommel, L.; Teterin, G. (1984). Способ электровысадки титановых стерэневых заготовок. Авторское свидетельство 1210313.. ВНИИГПЭ.

Tööstusomand

13.12.2020

Lembit Kommel

https://etis.ee/CV/Lembit_Kommel/eng
10.03.1944
372 6203356
5236513
lembit.kommel@taltech.ee

Career

Institutions and positions
01.01.2017–31.05.2020   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Ph. D., Senior Researcher Scientist (0,50)
01.01.2014–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Metals Processing, Ph. D., Senior Researcher Scientist (0,50)
1998–2013   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Metals Processing, Senior Researcher (1,00)
01.01.1994–31.12.1998   
1994-1998, President, Company "Saturn-Service", Russian Federation;
01.01.1993–31.12.1994   
1993-1994, Engineer, Firm ABB-Uniturbo, Russian Federation;
01.01.1992–31.12.1993   
1992-1993, Engineer, AS "A.Lylka-Saturn", Russian Federation;
01.01.1989–31.12.1992   
1989-1992, Senior Engineer, Experimental laboratory, S-T.C. "Saturn";
01.01.1986–31.12.1989   
1986-1989, Boss, Fundamental Production Department, S-T.C. "Saturn;
01.01.1973–31.12.1986   
1973-1986, Senior Foreman, Scientific-Technical Conjunction "Saturn", USSR;
 
 
Education
1981–1987   
1981-1987, Moscow State Institute of Steels and Alloys, Materials Science and Engineering
1979–1980   
1975-1980, Moscow Institute of Aviation Technolgy, Metals Hot Working by Pressure
1969–1975   
1969-1975, Moscow State Open University, Internal-Combustion Engines
1961–1964   
1961-1964, Tallinn Marine Scool, USSR
 
 
R&D related managerial and administrative work
2004−...   
The Member of TMS (The Minerals, Metals & Materials Society).

Qualifications

Academic degrees
Lembit Kommel, Doctor's Degree, 1987, (sup) Akad. G.P. Teterin, Kuumuskindlate titaanisulamite ratsionaalsete elektristantsimise protsesside väljatöötamine ja juurutamine (The elaboration and inculcation of rational of electric upsetting forging processes of heat proof titanium alloys), Moscow Institute of Steels and Alloys.
 
 
Honours & awards
2002, Lembit Kommel, Outstanding Poster, 2002 World Congress on Powder Metallurgy & Particulate Materials, June 16-21, 2002, Orlando, Florida, USA
1987, Lembit Kommel, The premium of academican A. Lylka nominal, USSR
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS CLASSIFICATION: T150 Material technology
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science
 
 
Additional information
Moscow Steel and Alloys Institute (Moscow State Technological University), 1987.

Dissertations under supervision

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2021
Kommel, Lembit; Põdra, Priit; Mikli, Valdek; Omranpour, Babak (2021). Gradient microstructure in tantalum formed under the wear track during dry sliding friction. Wear, 466-467, 203573−88. DOI: 10.1016/j.wear.2020.203573.
1.1.
2020
Komme, L. (2020). Peculiarities of Microstructure Evolution and Property Changes of Titanium Alloys In Situ during Electric Forging. Materials Performance and Characterization, 9 (2), 75−88. DOI: 10.1520/MPC20190109.
1.1.
2019
Kommel, L.; Shahreza, B. O.; Mikli, V. (2019). Microstructure and physical-mechanical properties evolution of pure tantalum processed with hard cyclic viscoplastic deformation. International Journal of Refractory Metals and Hard Materials, 83, 104983−104993.10.1016/j.ijrmhm.2019.104983.
1.1.
2019
Omranpour, B.; Ivanisenko, Y.; Kulagin, R.; Kommel, L.; Garcia Sanchez, E.; Nugmanov, D.; Scherer, T.; Heczel, A.; Gubicza, J. (2019). Evolution of microstructure and hardness in aluminum processed by High Pressure Torsion Extrusion. Materials Science and Engineering A, 762, 138074.10.1016/j.msea.2019.138074.
3.1.
2019
Pramono, A.; Kollo, L.; Kommel, L.; Veinthal, R. (2019). High-strength aluminum alloy of ultrafine grained by consolidation-ECAP. IOP Conference Series: Materials Science and Engineering, 478 (1). IOP PUBLISHING LTD, #012035. DOI: 10.1088/1757-899X/478/1/012035.
3.1.
2019
Kommel, L.; Omranpour, B. S.; Mikli, V. (2019). Structuration of Refractory Metals Tantalum and Niobium Using Modified Equal Channel Angular Pressing Technique. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (103−108). Trans Tech Publications Ltd. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.103.
3.1.
2019
Omranpour, B. S.; Kommel, L.; Sanchez, E. G.; Ivanisenko, Y.; Huot, J. (2019). Enhancement of Hydrogen Storage in Metals by Using a New Technique in Severe Plastic Deformations. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (173−178). TRANS TECH PUBLICATIONS LTD. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.173.
1.1.
2016
Pramono, A.; Kommel, L.; Kollo, L.; Veinthal, R. (2016). The Aluminum Based Composite Produced by Self Propagating High Temperature Synthesis. Materials Science, 22 (1), 41−43. DOI: 10.5755/j01.ms.22.1.7500.
5.2.
2016
Kommel, L.; Kodess, B. N.; Kommel, L. I. (2016). Order change and phase's redistribution in single crystal of Ni-based superalloy during hard cyclic viscoplastic deformation. Acta Crystallographica Section A: Foundations and Advances, A72, 297.
3.1.
2015
Kommel, L.; Tarraste, M.; Kolnes, M.; Veinthal, R.; Kübarsepp, J. (2015).
 . Euro PM2015 Proceedings: Euro PM2015 Congress & Exibition - Heads to Reims, Champagne, France. Ed. EPMA. Reims, France: European Powder Metallurgy Association, x−x.
3.1.
2015
Pramono, Agus; Kommel, Lembit; Kollo, Lauri; Veinthal, Renno (2015). Hot and Cold of Pressing Effect on ECAP-Parallel Channel Composite Based on Al/ANF Material. Advanced Materials Research, 1123, 343−347. DOI: 10.4028/www.scientific.net/AMR.1123.343.
3.1.
2014
Kommel, L. (2014). Microstructure and Properties of UFG Metals and Alloys. NANO 2014, Moscow, Russian Federation, 13-18 July, 2014. Moscow University Press, xx−xx.
3.1.
2014
Kommel, L.; Pardis, N.; Kimmari, E. (2014). Micromechanical properties and electrical conductivity of CU and CU-0.7WT% CR alloy. Proceedings of the 9th international conference of DAAAM Baltic industrial engineering 24-26th April 2014, Tallinn, Estonia. Tallinn, 2014: 9th International DAAAM Baltic Conference "INDUSTRIAL ENGINEERING", 24-26 April 2014, Tallinn, Estonia. Tallinn University of Technology, 354−359.
5.2.
2014
Kommel, L. (2014). Microstructure and Micromechanical Properties of UFG Metals and Alloys Produced by Severe Plastic Deformation Techniques. NANO 2014, Moscow, July 13-18, 2014. Moscow: Moscow University Press, -.
3.1.
2013
Kommel, L.; Tamm, T.; Metsavahi, R. (2013). Effects of New Superhard Phases Formation on Properties of Composite Processed by SHS. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (137−142).. Trans Tech Publications Ltd. (Key Engineering Materials; 527).
1.1.
2012
Kommel, L.; Saarna, M; Traksmaa, R; Kommel, I. (2012). Microstructure, Properties and Atomic Level Strain in Severely Deformed Rare Metal Niobium. Materials Science, 18 (4), 330−335.10.5755/j01.ms.18.4.3091.
1.1.
2012
Kommel, L.; Kimmari, E.; Viljus, M.; Traksmaa, R.; Volobueva, o.; Kommel, I. (2012). Phases Micromechanical Properties of Ni-base Superalloy Mesured by Nanoindentation. Materials Science, 18 (1), 28−33.10.5755/j01.ms.18.1.1337.
1.1.
2012
Kollo, L.; Kallip, K.; Gomon, J.-K.; Kommel, L. (2012). Hot Consolidation of Aluminum and Aluminum nano-MMC Powders by Equal Channel Angular Pressing. Materials Science, 18 (3), 234−237.10.5755/j01.ms.18.3.2431.
3.1.
2012
Kommel, Lembit; Metsvahi, Raido; Viljus, Mart; Kimmari, Eduard; Kolju, Karl; Traksmaa, Rainer (2012). Design of Superhard c-BC2N-precipitates in B4C/Al-composites through SHS and Heat Treatment. Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering : 19-21st April 2012, Tallinn, Estonia., II: 8th International DAAAM Baltic Conference "INDUSTRIAL ENGINEERING" 19-21 April 2012, Tallinn, Estonia. Ed. T. Otto. Tallinn University of Technology, 645−650.
3.1.
2012
Kommel, L.; Metsvahi, R.; Mihhaltsenkov, M. (2012). Production Technology Elaboration and Characterization of Al-MWCNT, Al-Fullerenes and Al-B4C Composites. Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering : 19-21st April 2012, Tallinn, Estonia., II. _EditorsAbbr T. Otto. Tallinn University of Technology, 651−656.
3.1.
2011
Kommel, L.; Mikli, V.; Traksmaa, R.; Saarna, M.; Pokartilov, A.; Pikker, S.; Kommel, I. (2011). Influence of the SPD Processing Feartures on the Nanostructure and Properties of a Pure Niobium. Nanomaterials by Severe Plastic Deformation: NanoSPD5, 2: 5th International Conference on Nanomaterials by Severe Plastic Deformation held in Nanjing, China on March 21-25, 2011. Ed. Jing Tao Wang, Roberto B. Figueiredo, Terence G. Langdon. Trans Tech-Scitec Publications Ltd, 785−790. (Materials Science Forum ; 667-669). DOI: 10.4028/www.scientific.net/MSF.667-669.785.
1.1.
2010
Kommel, L. (2010). Properties development of ultrafine-grained copper under hard cyclic viscoplastic deformation. Materials Letters, 64 (14), 1580−1582.10.1016/j.matlet.2010.04.056.
1.2.
2010
Kommel, L. (2010). Microstructure evolution in titanium alloys enforced by Joule heating and severe plastic deformation concurrently. Journal of Manufacturing Technology Research, 2, 59−76.
3.1.
2010
Kommel, L.; Straumal, B. (2010). Diffusion in SC Ni-base Superalloy under Viscoplastic Deformation. Diffusion in Solids and Liquids V: Fifth International Conference on Diffusion in Solids and Liquids : DSL-2009, Rome, Italy, 24th-26th June, 2009. Ed. Andreas Öchsner, Graeme E. Murch, Ali Shokuhfar and João M.P.Q. Delgado. Trans Tech Publications Ltd, 1340−1345. (Defect and Diffusion Forum; 297-301).10.4028/www.scientific.net/DDF.297-301.1340.
3.1.
2010
Kommel, L. (2010). New technique for characterization of microstructure of the nickel-base superalloy. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, II: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. _EditorsAbbr R. Küttner. Tallinn University of Technology Press, 498−503.
3.2.
2010
Kommel, L.; Kollo, L. (2010). Production of Hard Refractory Compounds on Base of Aluminium and Boron Carbide Powders. Proceedings of World Powder Metallurgy Congress and Exhibition PM2010, 2: World Powder Metallurgy Congress and Exhibition PM2010, Florence, Italy 10-14 October 2010. Schrewsbury, UK: European Powder Metallurgy Association, 337−343.
3.2.
2010
Kollo, L.; Leparoux, M.; Bradbury, C. R.; Kommel, L.; Carreno-Morelli, E.; Rodriguez-Arbaizar, M. (2010). Hardness of Hot Consolidated Al-SiC Nanocomposites from Planetary Milled Powders. Proceedings of World Powder Metallurgy Congress and Exhibition PM2010, 1: World Powder Metallurgy Congress and Exhibition PM2010, Florence, Italy 10-14 October 2010. Schrewsbury, UK: European Powder Metallurgy Association, 341−346.
1.1.
2009
Kommel, L. (2009). Viscoelastic Behavior of a Single-Crystal Nickel-Base Superalloy. Materials Science (Medžiagotyra), 15 (2), 123−128.
5.2.
2009
Kommel, L.; Dobatkin, S.; Straumal, B.; Kommel, I.; Kuznetsov, A. (2009). Structure Evolution of Submicrocrystalline Copper during Cyclic Deformation. Bulk Nanostructured Materials: From Fundamentals to Innovations. R.Z. Valiev (ed.) USATU, Ufa, Russia, 2009, p. 237-238.: 2nd Internationa Symposium on Bulk Nanostructured Materials: From Fundamentals to Innovations (BNM2009), Ufa, Russia Sept. 22-26, 2009, Ufa, Russia.. Russian Academy of Sciences, 237−238.
1.1.
2008
Kommel, L.; Rõzkina, A.; Vlasieva, I. (2008). Microstructural features of ultrafine grained copper under severe deformation. Materials Science (Medžiagotyra), 14 (3), 206−209.
1.1.
2008
Kommel, L.; Laev, N. (2008). Mechanism for single crystal refinement in high purity niobium during equal-channel angular pressing. Materials Science (Medžiagotyra), 14 (4), 319−323.
1.1.
2008
Kommel, Lembit; Kimmari, Eduard (2008). Multiphase Forming in Lightweight Composites during SHS Reaction. Materials Science (Medžiagotyra), 14 (3), 242−246.
1.2.
2008
Kommel, L.; Rozkina, A.; Vlasieva, I. (2008). Relationship of strength and durability of nanometls. Latvijas Kimijas Žurnals (Latvian Journal of Chemistry), 1, 55−60.
3.1.
2008
Kommel, L. (2008). Metals microstructure improving under hard cyclic viscoplastic deformation. In: Nanomaterials by Severe Plastic Deformation (349−354).. Trans Tech Publications Ltd. (Materials Science Forum; 584-586).
3.1.
2008
Kommel, L. (2008). UFG microstructure processing by ECAP from double electron-beam melted rare metal. In: Nanomaterials by Severe Plastic Deformation (349−354).. Trans Tech Publications Ltd. (Materials Science Forum ; 584-586).
3.1.
2008
Kimmari, E.; Kommel, L. (2008). Thermally induced cracking in aluminum/boron carbide composite. In: Kütner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (467−472).. Tallinn: Tallinn University of Technology.
3.1.
2008
Kommel, L.; Kimmari, E. (2008). Multiphase microstructure forming purpose in lightweight composites. Proceedings of thd 6th International Conference of DAAAM Baltic, Industrial Engineering, 2: Thd 6th International Conference of DAAAM Baltic, Industrial Engineering, 24-26th April 2008, Tallinn, Estonia. Ed. R. Küttner. Tallinn University of Technology, 479−484.
3.1.
2008
Kommel, L.; Kimmari, E. (2008). Solid phase`s transformations in boron carbide based composites during heat treatment. Čermák, J.; Stloukal, I. (Toim.). Solid Phase Transformations (175−180).. Trans Tech Publications Ltd. (Solid State Phenomena; 138).
3.2.
2008
Juhani, K.; Kimmari, E.; Kommel, L. (2008). Preparation of Multiphase Ligthweigth c-BN-Based Composite. Proceedings of Euro PM2008, 1: European Powder Metallurgy Conference & Exhibition Euro PM2008, Mannheim, Germany, 28.09-1.10.2008. European Powder Metallurgy Association, 231−236.
1.1.
2007
Kommel, L; Hussainova, I; Volobujeva, O. (2007). Microstructure and properties development of copper during severe plastic deformation. Materials & Design, 28 (7), 2121−2128.
5.2.
2007
Kommel, L.; Kimmari, E. (2007). Wear resistance behavior of light-weight composites. Abstracts of the XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007: XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007, October 25-26, Riga, Latvia. Ed. Grabits, J.; Krastins, J. Riga: Riga Technical University, 22.
5.2.
2007
Kommel, L. (2007). Diffusion and phase transformation in SC superalloys aided by HCV deformation. Abstracts of the XVI-th International Baltic Conference "Engineering Materials & Baltmattrib" *2007: XVI-th International Baltic Conference "Engineering Materials & Baltmattrib" *2007, October 25-26, Riga, Latvia. _EditorsAbbr Grabits, J.; Krastins. J. Riga: Riga Technical University, 11.
5.2.
2007
Kommel, L. (2007). Relationship of strength and durability of nanometals. Abstracts of the XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007": XVI-th International Baltic Conference "Engineering Materials & Baltmattrib *2007, October 25-26, 2007, Riga, Latvia. _EditorsAbbr Grabits, J.; Krastins, J. Riga: Riga Technical University, 10.
5.2.
2007
Kommel, L. (2007). A Study on Hard Cyclic Viscoplastic Deformation Behavior of Bulk UFG Metals. Int. symp. Bulk Nanostructured Materials: from fundamentals to innovations, BNM-2007, Ufa State Aviation Technical University, 14-18 August, 2007. _EditorsAbbr Valiev, R.Z; Langdon, T.G. 262−263.
1.1.
2006
Kommel, L. (2006). Diffusion in the interface region of Ti/TiAl-Nb bonding. Defect and Diffusion Forum, 249, 193−200.
1.2.
2006
Kommel, L.; Kimmari, E. (2006). Boron carbide based composites manufacturing and recycling features. Materials Science, 12 (1), 48−52.
1.2.
2006
Kommel, L.; Kommel, I. (2006). Damage evolution of structure and fracture of nanocrystalline copper at cyclic deformation. Deformation & Fracture of Materials, I, 411−414.
1.2.
2006
Kimmari, E.; Kommel, L. (2006). Application of the continuous indentation test method for the characterization of mechanical properties of B4C/Al composites. Proceedings of the Estonian Academy of Sciences. Engineering, 4, 399−407.
3.1.
2006
Kimmari, E.; Kommel, L. (2006). Dry Sliding Friction of Cubic Boron Nitride Based Composite Synthesized by SHS. 12th Nordic Tribology Symposium NORDTRIB 2006, Helsingor, Denmark, 6-9 June 2006.
5.2.
2006
Kommel, L; Hussainova, I.; Nisumaa, R., Volobujeva, O. (2006). Structural behavior and damage evolution of nanocrystalline copper at HCV deformation. Book of abstracts of Int. Conference on Engineering Materials and Tribology, BALTMATTRIB-2006, October, 5-6, 2006, Tallinn, Estonia: Int. Conference on Engineering Materials and Tribology, BALTMATTRIB-2006, October, 5-6, 2006, Tallinn, Estonia. 40−41.
5.2.
2006
Kimmari, Eduard; Kommel, Lembit (2006). The use of continuous indentation test method for characterization of mechanical properties of B4C/Al composites. Engineering Materials and Tribology BALTMATTRIB 2006: 15th International Baltic Conference Engineering Materials and Tribology BALTMATTRIB 2006, Tallinn, Estonia, October 5-6, 2006..
5.2.
2006
Kommel, L.; Hussainova, I.; Nisumaa, R.; Volobujeva, O. (2006). Structural behaviour of NC copper at hard cyclic viscoplastic deformation. Ultrafine Grained Materials - from Basics to Applications: UFG- 2006, September, 25-27, 2006, Kloster Irsee, Germany. Germany: Russian Association for Artificial Intelligence, 6-16−6-17.
5.2.
2006
Kommel, L.; Hussainova, I.; Veinthal, R.; Saarna, M. (2006). Stability and damage of nanocrystalline copper at cyclic elastic-plastic deformation. Ultrafine Grained Materials - from Basics to Applications: UFG - 2006, September 25 - 27, 2006, Kloster Irsee, Germany. Germany, 3-17−3-19.
1.1.
2005
Kommel, L.; Veinthal, R (2005). HCV deformation - Method to study the viscoplastic behavior of nanocrystalline metallic materials. REVIEWS ON ADVANCED MATERIALS SCIENCE, 10 (5), 442−446.
1.1.
2005
Kommel, L.; Hussainova, I.; Traksmaa, R (2005). Characterization of the viscoplastic behavior of nanocrystalline metals at HCV deformation. REVIEWS ON ADVANCED MATERIALS SCIENCE, 10 (5), 447−453.
1.1.
2005
Hussainova, I.; Kommel, L.; Lohmus, R.; Volobujeva, O. (2005). Microscopic characterization of surface morphology of nanostructured copper. REVIEWS ON ADVANCED MATERIALS SCIENCE, 10 (3), 266−271.
1.2.
2005
Kommel, Lembit; Kimmari, Eduard (2005). Investigations of structure and tribological properties of the lightweight c-BN-based composites. Materials Science, 11 (4), 394−397.
1.2.
2005
Kommel, L. (2005). Evolution of microstructure and properties of heat-proof superalloy enforced by electrical upsetting forging. Deformatcija i Razrushenie Materialov (Deformation and Fracture of Materials), 3, 21−27.
1.2.
2005
Kommel, L.; Hussainova, I.; Volobueva, O. (2005). Strength and plasticity of nanocrystalline copper. Deformatsija i razrushenie (Deformation and fracture of Materials), 11, 17−23.
1.2.
2005
Kommel, L.; Hussainova, I.; Volobujeva, O.; Lohmus, R. (2005). Microstructural evolution and mechanical properties of nanostructured copper. Proceedings of the Estonian Academy of Sciences. Engineering, 11 (3), 187−197.
3.4.
2005
Kommel, L. (2005). Structural optimization of titanium alloys by electric upset froging. Proceedings of the First International Conference on Modeling, Simulation and Applied Optimization (ICMSAO'05), Sharjah, School of Engineering, American University of Sharjah, United Arab Emirates.1-3 February 2005: First International Conference on Modeling, Simulation and Applied Optimization (ICMSAO'05), Sharjah, 1-3 February 2005. _EditorsAbbr Sadek, I.; Kucuk, I. Sharjah, United Arab Emirates,.
5.1.
2005
Hussainova, I.; Kommel, L.; Lyhmus, R.; Lyhmus, A. (2005). AFM characterization of surface morphology of nanaostructured copper. Abstacts of the 2nd International Conference "Nanomaterials and Nanotechnologies" Crete, Greece, 14-18 June 2005: 2nd International Conference "Nanomaterials and Nanotechnologies" Crete, Greece, 14-18 June 2005. , 60.
5.1.
2005
Kommel, L.; Hussainova, I. (2005). Hard cyclic viscoplastic (HCV) deformation - method for testing of the nanocrystalline metallic materials behavior. Abstracts of the 2nd International Conference "Nanomaterials and Nanotechnologies", Crete, Greece, 14-18 June 2005: 2nd International Conference "Nanomaterials and Nanotechnologies", Crete, Greece, 14-18 June 2005. Greece, 55.
5.1.
2005
Kommel, L.; Hussainova, I. (2005). Nanocrystalline metallic materials viscoplastic behavior characterization by HCV deformation. Abstracte of the 2nd International Conference "Nanomaterials and Nanotechnologies, Crete, Greece, 14-18 June 2005: 2nd International Conference "Nanomaterials and Nanotechnologies, Crete, Greece, 14-18 June 2005. Greece, 39.
5.2.
2005
Kommel, L. (2005). Diffusion and phase transformation influences on life extension of superalloys. Abstracts book of the International Conference "Diffusion in solids: Past, present and future" DiSo-05, Moscow, Russia, 23-27 May: International Conference "Diffusion in solids: Past, present and future" DiSo-05, Moscow, Russia, 23-27 May. Moscow State University Press, 28.
5.2.
2005
Hussainova, Irina; Kommel, Lembit; Lõhmus, Rynno; Lõhmus, Ants (2005). Mechanical behavior of nanostructured copper produced by SPD method. Proceedings of Int. Conference “Modern materials science: Achievements and Problems”: Int. Conference “Modern materials science: Achievements and Problems”,Kiev, Ukraine, September 26 – 30, 2005. Ukraine, 664−665.
5.2.
2005
Lõhmus, R.; Hussainova, I.; Kommel, L; Siimon, H. (2005). AFM analysis of nano-copper surface morphology [electronic resource]. In: Swadener, J.G; Lilleodden, E; Asif, S; Bahr, D; Weygand, D. (Ed.). Mechanical Properties of Nanostructured Materials - Experiments and Modeling : Proceedings of Material Research Society Spring Meeting, March 28 – April 1, 2005, San Francisco, CA, USA (-).. Warrendale, USA: Materials Research Society. (MRS Proceedings ; 880E ).
5.2.
2005
Lohmus, R.; Hussainova, I.; Vesi, U.; Nisumaa, R.; Kommel, L. (2005). Microscopic study on structural features of nanocrystalline copper. Proceedings of NANO'05 Conference: NANO'05 Conference, Brno, Czech Republic, November 8 - 10, 2005.
5.2.
2005
Kommel, L.; Kübarsepp, J.; Hussainova, I.; Kimmari, E. (2005). Structure and properties of boron nitride based composite - produced by SHS method. Proc. of Fifth International Conference on Composite Science and Technology (ICCST/5): Fifth International Conference on Composite Science and Technology (ICCST/5), 1-3 February 2005 Sharjah, United Arab Emirates,School of Engineering, American University of Sharjah. Unaited Arab Emirates, 461−466.
5.2.
2005
Kommel, L. (2005). Phase transformations in titanium alloys by rapid electric conduction heating with SPD. Book of abstracts of 10th International Symposium on Physics of Materials : ISPMA10 : August 30 - September 2, 2005, Prague, Czech. Republic: 10th International Symposium on Physics of Materials, ISPMA 10; Prague, Czech Republic, 30.8. - 2.9. 2005. Prague, Czech Republic, 31.
5.2.
2005
Kommel, L. (2005). Grain boundary phase transformations in superalloys. In: Book of abstracts: 10th International Symposium on Physics of Materials : ISPMA10 : august 30 -September 2, 2005, Prague, Czech Republic (30).. Prague, Czech Republic: Charles University.
5.2.
2005
"Hussainova, Irina;Lõhmus, Rünno;Kommel, Lembit;Siimon, H." (2005). AFM characterization of the surface morphology of the severe plastic deformed copper [Electronic resource]. TTY puuduv kirjastus,.
5.2.
2005
Kommel, L. (2005). Nanosructured copper manufacturing features and mechanical/physical properties forming. Nanopowders, Nanostructured Materials and Coatings : Network for Nanostructured Materials of ACC : March 17, 2005, Tallinn, Estonia : book of abstracts. Tallinna Tehnikaülikooli Kirjastus, 22−24.
5.2.
2005
Kommel, L. (2005). Diffusion in the interface region of Ti/TiAl-Nb bonding. Abstracts Book of the International Conference "Diffusion in solids: Past, present and future" DiSo-05, Moscow, Russia, 23-27 Mai, 2005: International Conference "Diffusion in solids: Past, present and future, Moscow, Russia, 23-27 Mai, 2005. Moscow State University Press, 29.
5.2.
2005
Kommel, L. (2005). Grain boundary phase transitions in superalloys. The Book of Abstracts "10th International Symposium on Physics of Materials" ISPMA 10, 30.8. - 2.9.2005, Prague, Czech Republic: 10th International Symposium on Physics of Materials, Prague, 30.8. - 2.9.2005.
5.2.
2005
Hussainova, I.; Kommel, L.; Kübarsepp, J.; Kimmari, E. (2005). Tribological properties of boron nitride based composites. Proceedings of the WTC2005 World Tribology Congress III - 2005: World Tribology Congress III - 2005, September 12-16, 2005, Washington, D.C. (USA). ASME Publications, 53−54.
3.1.
2004
Kommel, L. (2004). The effect of HCV deformation on hardening/softening of SPD copper. Ultrafine Grained Materials, III: 3rd International Symposium on Ultrafine Grained Materials, Charlotte, NC, MAR 15-17, 2004. _EditorsAbbr Zhu, Y.T.; Langdon, T.G.; Valiev, R.Z. TMS (The Minerals, Metals & Materials Society), 571−576.
3.1.
2004
Kommel, L.; Kübarsepp, J.; Veinthal, R.; Traksmaa, R. (2004). Fabrication, Control and Properties of Nanocrystalline Copper. In: Champion, Y.; Fecht, H-J. (Ed.). Nano-Archidectured and Nanostructured Materials : Fabrication, Control and Properties (27−37). . Weinheim: Wiley-V C H Verlag Gmbh.
3.4.
2004
Kommel, L.; Kimmari, E. (2004). Recycling of light weight B4C based composites. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn, Estonia: 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn. Tallinn: Tallinn University of Technology, 199−202.
5.1.
2004
Kommel, L.; Kybarsepp, J.; Hussainova, I. (2004). Boron Nitride Based Composite Structure and Properties manufactured by SHS with Hot Compaction. Abstracts of the 8th International Conference on the Science of Hard Materials, ICSHM8, San Juan, USA, 2004: 8th International Conference on the Science of Hard Materials, San Juan, USA, 2004. USA.
5.2.
2004
Kommel, L.; Hussainova, I. (2004). Strength and plasticity of nanocrystalline copper. Proc. of 3rd Int. Conference on Phase Transformation and Strength of Crystals: 3rd Int. Conference on Phase Transformation and Strength of Crystals. Chernogolovka, Russia, September 20 - 24, 2004. Russia.
5.2.
2004
Kommel, L. (2004). Effect of Elektroupsetting Forging on Microstructure and Properties of Advanced Superalloys. III International Conference “Phase Transformation and Strength of Crystals”. 20-24 September 2004, Chernogolovka, Russia: III International Conference “Phase Transformation and Strength of Crystals”, Chernogolovka, 20-24 September 2004. Moscow State University Press, 47.
5.2.
2004
Kommel, L. (2004). New advanced technologies for nanocrystalline metals manufacturing. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn, Estonia: 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn. Tallinn: Tallinn University of Technology, 195−198.
1.2.
2003
Kommel, L.; Kimmari, E. (2003). Friction and wear changes of boron carbide cermets depending on the structure. Materials Science, 1, 51−53.
1.2.
2003
Kommel, L.; Veinthal, R.; Kimmari, E. (2003). The Formation of Structure and Change of Properties during Heat Treatment of Boron Carbide Cermets. Materials Science, 9 (1), 99−101.
1.2.
2003
Kommel, L.; Traksmaa, R.; Kimmari, E. (2003). Influence of binder composition and microhardness on wear properties of lightweight composites. Powder metallurgy progress, 3 (3), 140−145.
3.1.
2003
Kommel, L.; Kübarsepp, J.; Klaasen, H. (2003). Boron carbide based composites microstructure and properties relationships to processing features. Proceedings of European Powder Metallurgy Conference - Challenges of a Changing Market, 2: European Powder Metallurgy Conference - Challenges of a Changing Market, October 20-22, 2003, Valencia (Spain). Shrewsbury, UK: European Powder Metallurgy Association, 87−92.
3.4.
2003
Kommel, L.; Traksmaa, R.; Kimmari, E. (2003). Influence of Binder Composition and Microhardness on Wear Properties of Light Weight Composites. Proceedings of the International Conference EUROMAT 2003, Lausanne, Switzerland, 01-05. September 2003: International Conference EUROMAT 2003, Lausanne, Switzerland, 01-05. September 2003.
5.2.
2003
Kenk, K.; Kommel, L.; Veinthal, R. (2003). Viscoplastic Behavior of SPD Copper. 12th international Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : October 2-3, 2003, Tallinn, Estonia : abstracts: Engineering materials and tribology. Baltmattrib-2003, international Baltic conference, Tallinn, October 2-3, 2003. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 47−48.
5.2.
2003
Kommel, L.; Kimmari, E. (2003). Formation of the Nanomeasures Refractory Compounds in the B4C Based Composites and Their Influence on Wear Resistance. Proceedings of the Joint Nordic Conference in Powder Technology, February 5-6, 2003 in Tampere, Finland: Joint Nordic Conference in Powder Technology, Tampere, February 5-6, 2003. Tampere University of Technology,.
5.2.
2003
Kommel, L.; Kimmari, E.; Traksmaa, R. (2003). Effect of attrition milling on grain size and properties of composites. 12th International Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : October 2-3, 2003, Tallinn, Estonia : abstracts: Engineering materials and tribology: Baltmattrib-2003, international Baltic conference, Tallinn, October 2-3, 2003. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 25.
5.2.
2003
Kommel, L. (2003). Microstructure and Microhardness Characteristics in the Interface Region of Ti/TiAl-Nb diffusion bonding. 12th international Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : October 2-3, 2003, Tallinn, Estonia : abstracts: Engineering materials and tribology: Baltmattrib-2003, international Baltic conference, Tallinn, October 2-3, 2003. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 56.
1.2.
2002
Kommel, L.; Kenk, K.; Veinthal, R. (2002). The copper structure and properties evolution in zone of severe plastic deformation. Materials Science, 4, 396−398.
1.2.
2002
"Kommel, Lembit;Hussainova, Irina;Kimmari, Eduard" (2002). The structure and properties forming in boron carbide aluminium composites during processing. 6. USA: Metal Powder Industry Federation, 182−187.
3.1.
2002
Kommel, L.; Kenk, K.; Veinthal, R. (2002). Influence of SPD on Structure and Properties of Copper. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME", DAAM : 25-27 April 2002, Tallinn, Estonia: 3rd International Conference "Industrial Engineering - New Challenges to SME", DAAM : 25-27 April 2002, Tallinn. Tallinn: Tallinn Technical University, 161−164.
3.1.
2002
Kommel, L.; Kimmari, E. (2002). The Formation of Wear Resistant Properties of Boron Carbide Cermet. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME", DAAAM : 25-27 April 2002, Tallinn, Estonia: 3rd International Conference "Industrial Engineering - New Challenges to SME", Tallinn, 25-27 April 2002. Tallinn: Tallinn Technical University, 165−168.
3.4.
2002
Kommel, L.; Traksmaa, R.; Kimmari, E. (2002). The Influence of Refractory Compositions in Binder Phase on Wear Properties of Boron Carbide/Aluminium Composites. Proceedings of the 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002 : [CD-ROM]: 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002. Stockholm, 11.
5.1.
2002
Kommel, Lembit; Hussainova, Irina; Kimmari, Eduard (2002). The structure and properties forming in boron carbide/aluminium composite during processing. Advances in Powder Metallurgy and Particulate Materials: Hard Metals/ Refractory metals/ Composite, 6. Metal Powder Industry Publications, 8−15.
5.2.
2002
Kommel, L.; Kenk, K.; Veinthal, R. (2002). Viscoplastic Behaviour of SPD Copper. Book of Abstracts: 2nd International Conference on Nanomaterials by Severe Plastic Deformation, Fundamentals-Processing-Applications, Dec. 9-13, 2002: 2nd International Conference on Nanomaterials by Severe Plastic Deformation, Fundamentals-Processing-Applications, Dec. 9-13, 2002. University of Vienna, Materials Physics Institute.
5.2.
2002
Kommel, L.; Traksmaa, R.; Kimmari, E. (2002). The Influence of Refractory Compositions in Binder Phase on Wear Properties of Boron Carbide/Aluminium Composites. Keynotes and Abstracts the 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002: 10th Nordic Symposium on Tribology, Stockholm, June 9-12, 2002. 97.
3.2.
2001
Kommel, L.; Kimmari, E. (2001). The Influence of Binder Phase Status on the Wear Resistance of Boron Carbide Cermet by Friction. Proceedings of the X-th International Baltic Conference, Materials Engineering & Balttrib 2001, September 27-28, Jurmala, Latvia: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, 2001, September 27-28. , 202−206.
3.4.
2001
Kommel, L. (2001). The Influence of Development of New Technology and materials on Resource of Gas Turbine Engines. Proceedings of BALTICA-2001, International Conference on Condition & Life Management for Power Plants, 1: BALTICA-2001, International Conference on Condition & Life Management for Power Plants, Helsinki, 06-08 June 2001. Helsinki: Finnish Forest Research Institute, 173−184.
3.4.
2001
Kommel, L.; Veinthal, R. (2001). The Investigation of Advanced Constructional Materials and Manufacturing Technologies. X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, Latvia, 2001, September 27-28. Riga Technical University, 41−45.
3.4.
2001
Kommel, L.; Peetsalu, P.; Veinthal, R. (2001). Evolution of Microstructure and Properties in Ti-alloys During Rapid Electrocontact Heating with SPD. Proceedings of the X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, 2001, September 27-28. Riga Technical University, 62−66.
3.4.
2001
Kommel, L. (2001). The Plastic Flow of alloys in Zone of Angular Deformation by Electroupsetting Forging. X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, Latvia, 2001, September 27-28. Riga, Latvia: Riga Technical University, 67−71.
5.2.
2001
Kommel, L.; Viljus, M. (2001). Structure and Properties Evolution of Superalloy in Zone of Uniform deformation by Electroupsetting. Euromat-2001 : 7th European Conference on Advanced Materials and Processes: Euromat-2001, Rimini, Italy, 10-14 June 2001. Italian Physical Society, 402.
5.2.
2001
Kommel, L.; Hussainova, I.; Kimmari, E. (2001). Wear and Friction in Boron Carbide Cermet-Steel Sliding System. WTC 2001 : [CD-ROM]: WTC 2001, Vienna, Austria, 03-07 September 2001. University of Vienna, 93.
5.2.
2001
Kommel, L.; Traksmaa, R. (2001). The Characterization of TiAl Intermetallics after Rapid Solidification by IFFM Technique. EUROMAT 2001, 7th European Conference on Advanced Materials and Processes: EUROMAT 2001, Rimini, Italy, 10-14 June 2001. Rimini, Italy, 339−340.
6.7.
2001
Kommel, L.; Kurik, L.; Traksmaa, R. (2001). Evolution of the Characteristics of Light Weight Boron Carbide Cermet after Heat Treatment. Proceeding of the International Conference Euromat-2001, Rimini, Italy : [CD-ROM]: International Conference Euromat-2001, Rimini.
1.2.
2000
"Kommel, Lembit;Teterin, G.;Traksmaa, Rainer" (2000). Increase of life extension compressor blades of the turbo-jet by electroupsetting. In: Advances in Mechanical Behaviour, Plasticity and Damage (1143−1148).. Amsterdam: Elsevier.
3.1.
2000
Kommel, L.; Pirso, J.; Traksmaa, R. (2000). The Light Weight Boron Carbide Cermet as Tribomaterial. Proceedings of the 9th Nordic Symposium on Tribology, NORDTRIB 2000, 3: 9th Nordic Symposium on Tribology, NORDTRIB 2000, Porvoo, 11-14 June 2000. _EditorsAbbr Anderson, P.; Ronkainen, H.; Holmberg, K. Espoo: Technical Research Centre of Finland, 886−895. (VTT SYMPOSIA ).
3.5.
2000
Letunovitš, S.; Kommel, L.; Viljus, M.; Pirso, J. (2000). Characterization of TiC Powders Milled by Attrition Technique. Proceedings of the 2nd International Conference, 27-29th April 2000, Tallinn, Estonia: Danube Adria Association for Automation and Manufacturing, 2nd international conference, Tallinn, 27-29th April 2000. Tallinn: Tallinn Technical University, 153−156.
5.2.
2000
Kommel, L.; Traksmaa, R. (2000). The Metal Ceramic Boron Carbide Light Alloy Produced by Powder Technology. Proceedings of the Joint Nordic Conference in Powder Technology, Stockholm, 2000: Joint Nordic Conference in Powder Technology, Stockholm, 2000. Westmanska Palatset, 37.
1.2.
1999
Kodess, B.;Teterin, G.; Kommel, L.; Ovcharov, V. (1999). Structure and mechanical properties of the engine valves with intermetallic disk. Journal of Materials Research, 652−657.
3.2.
1999
Kodess, B.; Teterin, G.; Kommel, L.; Ovcharov, V. (1999). Structure and mechanical propertiesof the engine valves with intermetallic disk. Proceedings of Materials Research Society Fall Meeting: Materials Research Society Fall Meeting, Boston, November 30 - December 3, 1998. Materials Research Society, kk8.37.1−kk8.37.5. (Materials Research Society symposium proceedings; 554).
3.4.
1999
Kommel, L. (1999). Microstructural control of TiAl intermetallic alloys. In: VIII-th International Baltic Conference, Materials Engineering-99 (121−124).. Kaunas, Lithuania: Kaunas Technologija.
3.4.
1999
Kommel, L. (1999). Impact fused-forging modeling technique. In: VIII-th International Baltic Conference, Materials Engineering-99 (117−120).. Kaunas, Lithuania: Kaunas Technologija.
3.4.
1999
Kommel, L. (1999). Titaani alumiinid kui järgmise sajandi konstruktsioonimaterjalid masinaehituses. IV Foreign-Estonian Congress: IV Foreign-Estonian Congress, Tallinn, Estonia, June 29-30, 1999. Tallinn: Välis-Eesti Ühing, 89−90.
5.2.
1999
Kommel, L.; Teterin, G.; Kodess, B. (1999). Microstructure control of titanium aluminides intermetallic by impact fused-forging modelling. Investigation and Application of Severe Plastic Deformation: Investigation and Application of Severe Plastic Deformation, Moscow, Russia, 2-7 August 1999. _EditorsAbbr Lowe T.C.; Valiev R.Z. Kluwer Academic Publishers, 79−79.
5.2.
1999
Kommel, L.; Teterin, G. (1999). Microstructure evolution in Ti-alloys during severe plastic deformation by electric upset forging. Proceedings of the NATO Advanced Research Workshop. Investigations and Applications of Severe Plastic Deformation: Investigation and Application of Severe Plastic Deformation, Moscow, Russia, 2-6 August, 1999. Kluwer Academic Publishers, 78.
5.2.
1999
Kommel, L. (1999). Исследование структуры и свойств Ti-Al-Nb сплава. Современные материалы, технологии, оборудование и инструменты в машиностроении (67).. ИФМ АН Украины.
5.2.
1999
Kommel, L. (1999). Исследование механизма структурообразования в титановых сплавах при электровысадке. Современные материалы, технологии, оборудование и инструменты в машиностроении (Наука - производству - 99) (66).. Киев, Украина: ИФМ АН Украины.
5.2.
1999
Kommel, L. (1999). Исследование зоны соединения металлов в биметаллических деталях, полученные импульсной жидко-штамповой формовкой. Современные материалы, технологии, оборудование и инструменты в машиностроении (65).. Киев, Украина: ИФМ АН Украины.
5.2.
1999
Kommel, L.; Ovcharov, V.; Kodess, B.; Teterin, G.; Kisel, N.; Ermolova, M. (1999). Structure and mechanical properties of TiAl. Proceedings of IUCr99: International Conference IUCr99, Glasgow (Ingland), August 08. 1999. Ingland: University of Glasgow, 2219. (Abstract Number 2219).
1.2.
1998
Kommel, L.; Teterin, G. (1998). Electric upset forging of preforms for compressor short blades stamping. Kuznechno-Shtampovochnoe Proizvodstvo, 10, 18−22.
1.2.
1998
Kommel L.A., Teterin G.P. (1998). Electric upset forging of titanium blanks with regulated structure and properties. Kuznechno-Shtampovochnoe Proizvodstvo, 8, 35−40.
6.1.
1996
Kommel, L. (1996). Штамповка на электро-высадочных машинах. Manuilov, V.F.; Beljanin, P.N.. Машиностроение: Энциклопедия (140−143).. Moskva: Машиностроение.
6.7.
1991
Kommel, L. (1991). Способ изготовления металлокерамических изделий и контейнер для их изготовления. Патент No 1836190.. Moscow, USSR: Патент.
1.2.
1988
Teterin, G.; Kommel, L. (1988). Choice of electrical upseting process rational parameters of titanium preforms. Kuznechno-Shtampovochnoe Proizvodstvo, 2, 14−16.
2.3.
1987
Kommel, L. (1987). Разработка и внедрение рациональных процессов электровысадки заготовок из жаропрочных титановых сплавов. (Всесоюзный ордена трудового красного знамени заочный политехнический институт). Москва: Moscow State University.
1.2.
1985
Teterin, G.; Kommel, L. (1985). Study of electric upseting forging process of preforms from heat proof titanium alloy of VT18U. Izvestija vuzov. Mashinostroenie, 9, 133−137.
1.2.
1985
Teterin, German; Kommel, Lembit (1985). The peculiarities of elctrical upseting of preforms from titanium alloys. Kuznechno-Shtampovochnoe Proizvodstvo, 7, 10−14.
1.2.
1985
Kommel, L. (1985). Discrepancy of electric upset forging of blank from titanium alloys. Kuznechno-Shtampovochnoe Proizvodstvo, 7, 10−14.
1.3.
1985
Kommel, L.; Teterin, G. (1985). Production of low-defective details from titanium alloys by electric upset forging. The technology of light alloys, 5, 31−36.
5.2.
1984
Kommel, L.; Teterin , G. (1984). Influence of thermal processes of electrocontact upsetting on details quality from titanium alloys. Proc. of the 6th All Sovet Union Conference "Physics of Heat of Technological Processes, 10-12 Okt. 1984, Taskent, Uzbecistan: 6th All Sovet Union Conference "Physics of Heat of Technological Processes, 10-12 Okt. 1984, Taskent, Uzbecistan. Taskent, USSR, Uzbekistan, 73. (3).
6.7.
1984
Kommel, L.; Teterin, G. (1984). Способ электровысадки титановых стерэневых заготовок. Авторское свидетельство 1210313.. ВНИИГПЭ.

Industrial property

13.12.2020

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 19 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
IUTIUT19-29 Mitmeastmeliselt struktureeritud keraamika-baasil komposiitmaterjalid kasutamiseks ekstreemtingimustes 01.01.201431.12.2019Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond; Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 1 770 000,00 EUR
MUUG5878 (ETF5878)Deformeeritavate nanostruktuursete haruldaste metallide tehnoloogia ja omadused01.01.200431.12.2005Lembit KommelTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool7 594,17 EUR
MUUGERA219Faasi ekviliibriumi (tasakaalu) nihe nanoteralistes materjalides.01.09.201231.12.2013Lembit KommelTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool48 678,00 EUR
MUUF8083Isemäärivad süsinikunanotoru (CNT) tribopinded04.08.200807.11.2008Vitali PodgurskiTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool8 887,17 EUR
ETFETF6163Kaasaegsete materjalide nanostruktuuri disain01.01.200531.12.2008Irina HussainovaTallinna Tehnikaülikool, Mehaanikateaduskond40 682,40 EUR
MUUG5611 (ETF5611)Kergkomposiitide tehnoloogia ja omadused01.01.200331.12.2004Lembit KommelTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool3 195,58 EUR
PRGPRG665Komposiitmaterjalid "keraamika-Fe sulam " kasutamiseks tingimuste laias diapasoonis01.01.202031.12.2020Kristjan JuhaniTallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 257 125,00 EUR
SFSF0142505s03Kulumiskindlad materjalid ja kulumine01.01.200331.12.2007Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond668 100,42 EUR
MUU349FKõrgkvaliteetsete materjalide kuumisostaatpressimise tehnoloogia01.06.200331.12.2004Jakob KübarseppTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool143 034,27 EUR
MUUG4843 (ETF4843)Materjalide viskoplastsete parameetrite määramine ja optimeerimine tsüklilisel deformeerimisel01.01.200131.12.2002Kalju KenkTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut, Masinamehaanika õppetool6 582,90 EUR
SFSF0140062s08Mitmefaasiliste tribomaterjalide arendamine ja tehnoloogia01.01.200831.12.2013Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond1 259 299,69 EUR
ETFETF8472Nanoosakeste valmistustehnoloogia möju metallmaatriks nanokomposiitide omadustele01.01.201031.12.2012Lauri KolloTallinna Tehnikaülikool, Mehaanikateaduskond36 813,44 EUR
MUUF7006Nanostruktuursed kermised I01.02.200724.04.2007Jüri PirsoTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool11 055,44 EUR
MUUG3401 (ETF3401)Peeneteralised kermised01.01.199831.12.2001Jüri PirsoTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool10 928,89 EUR
MUUAR12131Püsimagnetid jätkusuutliku energeetika rakendustes (MagMat).17.03.201230.06.2015Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut425 929,00 EUR
MUUT234 (0140234s98)Tribomaterjalid ja-süsteemid01.01.199831.12.2002Jakob KübarseppTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool417 151,33 EUR
MUUF687Uudse struktuuriga volframkarbiid-koobalt (WC-Co) kõvasulamist antifriktsioonmaterjali tehnoloogia väljatöötamine04.09.200611.12.2006Jüri PirsoTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool12 750,82 EUR
MUUBF86Võrdkanalilise nurkpressimise katseseade01.05.200830.11.2008Lembit KommelTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool2 300,82 EUR
MUUF7122Ülipuhaste nioobiumi ja tantaali mikrostruktuuri parandamine ja tehnoloogia väljatöötamine03.12.200725.01.2008Lembit KommelTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool5 725,01 EUR