See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Ramin Rahmani Ahranjani

https://etis.ee/CV/Ramin Rahmani Ahranjani/est
22.09.1982
+372 51988504
ramin.rahmaniahranjani@gmai.com

Teenistuskäik

Töökohad ja ametid
01.09.2020–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Insener (0,25)
01.01.2020–31.08.2020   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , doktorant-nooremteadur (0,25)
01.01.2017–31.08.2018   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Nooremteadur (0,25)
01.10.2016–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool, Nooremteadur (0,25)

Kvalifikatsioon

Teaduskraadid
Ramin Rahmaniahranjani, doktorikraad, 2020, (juh) Maksim Antonov; Lauri Kollo, Combination of SLM-SPS Approaches for Tribological, Antibacterial and Biomaterial Applications (Kombineeritud SLM-SPS meetod triboloogiliste, antibakteriaalsete ja biosobivate materjalide valmistamiseks), Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut
 
 

Jooksvad projektid

Lõppenud projektid

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2021
Rahmani, R.; Antonov, M.; Prashanth, K. G. (2021). The Impact Resistance of Highly Densified Metal Alloys Manufactured from Gas-Atomized Pre-Alloyed Powders. Coatings, 11, #216. DOI: 10.3390/coatings11020216.
1.1.
2020
Rahmani, R.; Brojan, M.; Antonov, M.; Prashanth, K. G. (2020).

Perspectives of metal-diamond composites additive manufacturing using SLM-SPS and other techniques for increased wear-impact resistance

. International Journal of Refractory Metals and Hard Materials, 88 (105192), Article nr: 105192. DOI: 10.1016/j.ijrmhm.2020.105192.
1.1.
2020
Kamboj, N.; Kazantseva, J.; Rahmani, R.; Rodríguez, M. A.; Hussainova, I. (2020). Selective laser sintered bio-inspired silicon-wollastonite scaffolds for bone tissue engineering. Materials Science and Engineering C, 116, #111223. DOI: 10.1016/j.msec.2020.111223.
1.1.
2020
Rahmani, R.; Antonov, M.; Brojan, M. (2020). Lightweight 3D printed Ti6Al4V-AlSi10Mg hybrid composite for impact resistance and armor piercing shielding. Journal of Materials Research and Technology. DOI: 10.1016/j.jmrt.2020.09.108.
2.1.
2020
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2020). Biomaterials for Bone Tissue Engineering. In: Special Issue Editor: J. A. Sanz-Herrera (Ed.). Biomaterials for Bone Tissue Engineering (19−29). Switzerland : MDPI. DOI: 10.3390/books978-3-03928-966-0.
2.3.
2020
Rahmani Ahranjani, R. (2020). Combination of SLM-SPS Approaches for Tribological, Antibacterial and Biomaterial Applications. (Doktoritöö, Tallinn University of Technology (TalTech) ). TalTech.
1.1.
2019
Rahmani, R.; Antonov, M.; Kollo, L. (2019). Wear Resistance of (Diamond-Ni)-Ti6Al4V Gradient Materials Prepared by Combined Selective Laser Melting and Spark Plasma Sintering Techniques. Advances in Tribology, Article ID 5415897. DOI: 10.1155/2019/5415897.
1.1.
2019
Rahmani, R.; Antonov, M.; Kamboj, N. (2019). Modelling of impact-abrasive wear of ceramic, metallic and composite materials. Proceedings of Estonian Academy of Sciences, 68 (3), 191−197. DOI: 10.3176/proc.2019.2.11.
1.1.
2019
Kamboj, NK.; Rodriguez, M.A.; Rahmani, R.; Prashanth, K.G.; Hussainova, I. (2019). Bioceramic scaffolds by additive manufacturing for controlled delivery of the antibiotic vancomycin. Proceedings of the Estonian Academy of Sciences. Engineering, 68 (2), 185−190. DOI: 10.3176/proc.2019.2.10.
1.1.
2019
Rahmani, Ramin; Antonov, Maksim; Kollo, Lauri (2019). Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study. Advances in Materials Science and Engineering, 2019, Article ID 4210762, 11 pages.10.1155/2019/4210762.
1.1.
2019
Rahmani, Ramin; Rosenberg, Merilin; Ivask, Angela; Kollo, Lauri (2019). Comparison of Mechanical and Antibacterial Properties of TiO2/Ag Ceramics and Ti6Al4V-TiO2/Ag Composite Materials Using Combined SLM-SPS Techniques. Metals, 9 (8), 874. DOI: 10.3390/met9080874.
1.1.
2019
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2019). <p>Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications</p>. Applied Sciences, 9 (18), ARTN: 3844. DOI: 10.3390/app9183844.
1.1.
2019
Holovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, Renno (2019). Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites. International Journal of Refractory Metals and Hard Materials, 105087. DOI: 10.1016/j.ijrmhm.2019.105087.
1.2.
2019
Rahmani, Ramin; Antonov, Maksim (2019). Axial and torsional buckling analysis of single- and multi-walled carbon nanotubes: finite element comparison between armchair and zigzag types. SN Applied Sciences, 1 (9). DOI: 10.1007/s42452-019-1190-0.
3.1.
2019
Antonov, M.; Ivanov, R.; Holovenko, Y.; Goljandin, D.; Rahmaniahranjani, R.; Kollo, L.; Hussainova, I. (2019). 3D printing of plain and gradient cermets with efficient use of raw materials. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (239−245). Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.239.
3.4.
2019
Rahmani, Ramin; Kollo, Lauri; Antonov, Maksim (2019). Modelling of Ti6Al4V triply periodic minimal surface manufactured via selective laser melting for biomaterial application. Euro PM2019 Proceedings Congress & Exhibition, Maastricht, Netherlands, 13-16 October 2019. European Powder Metallurgy Association (EPMA).
5.2.
2019
Ramin Rahmani, Maksim Antonov (2019). 3D printing technology to address tribological applications. 2nd Asia-Pacific International Conference on Additive Manufacturing (APICAM2019), 30th June – 3rd July 2019, Melbourne, Australia. 2nd Asia-Pacific International Conference on Additive Manufacturing (APICAM2019), 30th June – 3rd July 2019, Melbourne, Australia,.
5.2.
2019
Rahmani, K.; Antonov, M.; Kamboj, M. (2019). Modelling of impact-abrasive wear of ceramic, metallic and composite materials. Modern Materials and manufacturing (MMM 2019), 23-26 April 2019,. Tallinn, Estonia. .
5.2.
2018
Ramin Rahmani Ahranjani, Maksim Antonov, Lauri Kollo (2018). Modelling of impact-abrasive wear processes and materials. 45th Leeds-Lyon Symposium on Tribology, Tuesday 4 – Friday 7 September 2018 Leeds Trinity University, Leeds, UK. 45th Leeds-Lyon Symposium on Tribology, Tuesday 4 – Friday 7 September 2018 Leeds Trinity University, Leeds, UK,.
5.2.
2018
Ramin Rahmani, Maksim Antonov, Lauri Kollo (2018). Wear simulation of hybrid composite obtained by combined selective laser melting and spark plasma sintering technologies. THE 6TH ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY, University of Malaya, Kuala Lumpur, Malaysia, 17-20 September 2018,.
5.2.
2018
Rahmani, R.; Kollo, L.; Antonov, M. (2018). 3D printed cermet hand watch produced by combined SLM and SPS approaches. Young Ceramists Additive Manufacturing Forum, 3rd-4th May, YCAM 2018, Padua, Italy .
1.1.
2008
Arani, A. Ghorbanpour; Rahmani, R.; Arefinanesh, A.; Golabi, S. (2008). Buckling analysis of multi-walled carbon nanotubes under combined loading considering the effect of small length scale. Journal of Mechanical Science and Technology, 22 (3), 429−439. DOI: 10.1007/s12206-007-1045-2.
1.1.
2008
Arani, A. Ghorbanpour; Rahmani, R.; Arefmanesh, A. (2008). Elastic buckling analysis of single-walled carbon nanotube under combined loading by using the ANSYS software. Physica E-Low-Dimensional Systems & Nanostructures, 40 (7), 2390−2395. DOI: 10.1016/j.physe.2007.11.011.
18.02.2021

Ramin Rahmani Ahranjani

https://etis.ee/CV/Ramin Rahmani Ahranjani/eng
22.09.1982
+372 51988504
ramin.rahmaniahranjani@gmai.com

Career

Institutions and positions
01.09.2020–...   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Engineer (0,25)
01.01.2020–31.08.2020   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Junior Researcher (0,25)
01.01.2017–31.08.2018   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Junior Researcher (0,25)
01.10.2016–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Metals Processing, Junior Researcher (0,25)

Qualifications

Academic degrees
Ramin Rahmaniahranjani, Doctor's Degree, 2020, (sup) Maksim Antonov; Lauri Kollo, Combination of SLM-SPS Approaches for Tribological, Antibacterial and Biomaterial Applications, Tallinn University of Technology School of Engineering, Department of Mechanical and Industrial Engineering
 
 

Projects in progress

Completed projects

Publications

Category
Year
Publication
 
1.1.
2021
Rahmani, R.; Antonov, M.; Prashanth, K. G. (2021). The Impact Resistance of Highly Densified Metal Alloys Manufactured from Gas-Atomized Pre-Alloyed Powders. Coatings, 11, #216. DOI: 10.3390/coatings11020216.
1.1.
2020
Rahmani, R.; Brojan, M.; Antonov, M.; Prashanth, K. G. (2020).

Perspectives of metal-diamond composites additive manufacturing using SLM-SPS and other techniques for increased wear-impact resistance

. International Journal of Refractory Metals and Hard Materials, 88 (105192), Article nr: 105192. DOI: 10.1016/j.ijrmhm.2020.105192.
1.1.
2020
Kamboj, N.; Kazantseva, J.; Rahmani, R.; Rodríguez, M. A.; Hussainova, I. (2020). Selective laser sintered bio-inspired silicon-wollastonite scaffolds for bone tissue engineering. Materials Science and Engineering C, 116, #111223. DOI: 10.1016/j.msec.2020.111223.
1.1.
2020
Rahmani, R.; Antonov, M.; Brojan, M. (2020). Lightweight 3D printed Ti6Al4V-AlSi10Mg hybrid composite for impact resistance and armor piercing shielding. Journal of Materials Research and Technology. DOI: 10.1016/j.jmrt.2020.09.108.
2.1.
2020
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2020). Biomaterials for Bone Tissue Engineering. In: Special Issue Editor: J. A. Sanz-Herrera (Ed.). Biomaterials for Bone Tissue Engineering (19−29). Switzerland : MDPI. DOI: 10.3390/books978-3-03928-966-0.
2.3.
2020
Rahmani Ahranjani, R. (2020). Combination of SLM-SPS Approaches for Tribological, Antibacterial and Biomaterial Applications. (Doktoritöö, Tallinn University of Technology (TalTech) ). TalTech.
1.1.
2019
Rahmani, R.; Antonov, M.; Kollo, L. (2019). Wear Resistance of (Diamond-Ni)-Ti6Al4V Gradient Materials Prepared by Combined Selective Laser Melting and Spark Plasma Sintering Techniques. Advances in Tribology, Article ID 5415897. DOI: 10.1155/2019/5415897.
1.1.
2019
Rahmani, R.; Antonov, M.; Kamboj, N. (2019). Modelling of impact-abrasive wear of ceramic, metallic and composite materials. Proceedings of Estonian Academy of Sciences, 68 (3), 191−197. DOI: 10.3176/proc.2019.2.11.
1.1.
2019
Kamboj, NK.; Rodriguez, M.A.; Rahmani, R.; Prashanth, K.G.; Hussainova, I. (2019). Bioceramic scaffolds by additive manufacturing for controlled delivery of the antibiotic vancomycin. Proceedings of the Estonian Academy of Sciences. Engineering, 68 (2), 185−190. DOI: 10.3176/proc.2019.2.10.
1.1.
2019
Rahmani, Ramin; Antonov, Maksim; Kollo, Lauri (2019). Selective Laser Melting of Diamond-Containing or Postnitrided Materials Intended for Impact-Abrasive Conditions: Experimental and Analytical Study. Advances in Materials Science and Engineering, 2019, Article ID 4210762, 11 pages.10.1155/2019/4210762.
1.1.
2019
Rahmani, Ramin; Rosenberg, Merilin; Ivask, Angela; Kollo, Lauri (2019). Comparison of Mechanical and Antibacterial Properties of TiO2/Ag Ceramics and Ti6Al4V-TiO2/Ag Composite Materials Using Combined SLM-SPS Techniques. Metals, 9 (8), 874. DOI: 10.3390/met9080874.
1.1.
2019
Rahmani, R.; Antonov, M.; Kollo, L.; Holovenko, Y.; Prashanth, K. G. (2019). <p>Mechanical Behavior of Ti6Al4V Scaffolds Filled with CaSiO3 for Implant Applications</p>. Applied Sciences, 9 (18), ARTN: 3844. DOI: 10.3390/app9183844.
1.1.
2019
Holovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, Renno (2019). Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites. International Journal of Refractory Metals and Hard Materials, 105087. DOI: 10.1016/j.ijrmhm.2019.105087.
1.2.
2019
Rahmani, Ramin; Antonov, Maksim (2019). Axial and torsional buckling analysis of single- and multi-walled carbon nanotubes: finite element comparison between armchair and zigzag types. SN Applied Sciences, 1 (9). DOI: 10.1007/s42452-019-1190-0.
3.1.
2019
Antonov, M.; Ivanov, R.; Holovenko, Y.; Goljandin, D.; Rahmaniahranjani, R.; Kollo, L.; Hussainova, I. (2019). 3D printing of plain and gradient cermets with efficient use of raw materials. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (239−245). Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.239.
3.4.
2019
Rahmani, Ramin; Kollo, Lauri; Antonov, Maksim (2019). Modelling of Ti6Al4V triply periodic minimal surface manufactured via selective laser melting for biomaterial application. Euro PM2019 Proceedings Congress & Exhibition, Maastricht, Netherlands, 13-16 October 2019. European Powder Metallurgy Association (EPMA).
5.2.
2019
Ramin Rahmani, Maksim Antonov (2019). 3D printing technology to address tribological applications. 2nd Asia-Pacific International Conference on Additive Manufacturing (APICAM2019), 30th June – 3rd July 2019, Melbourne, Australia. 2nd Asia-Pacific International Conference on Additive Manufacturing (APICAM2019), 30th June – 3rd July 2019, Melbourne, Australia,.
5.2.
2019
Rahmani, K.; Antonov, M.; Kamboj, M. (2019). Modelling of impact-abrasive wear of ceramic, metallic and composite materials. Modern Materials and manufacturing (MMM 2019), 23-26 April 2019,. Tallinn, Estonia. .
5.2.
2018
Ramin Rahmani Ahranjani, Maksim Antonov, Lauri Kollo (2018). Modelling of impact-abrasive wear processes and materials. 45th Leeds-Lyon Symposium on Tribology, Tuesday 4 – Friday 7 September 2018 Leeds Trinity University, Leeds, UK. 45th Leeds-Lyon Symposium on Tribology, Tuesday 4 – Friday 7 September 2018 Leeds Trinity University, Leeds, UK,.
5.2.
2018
Ramin Rahmani, Maksim Antonov, Lauri Kollo (2018). Wear simulation of hybrid composite obtained by combined selective laser melting and spark plasma sintering technologies. THE 6TH ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY, University of Malaya, Kuala Lumpur, Malaysia, 17-20 September 2018,.
5.2.
2018
Rahmani, R.; Kollo, L.; Antonov, M. (2018). 3D printed cermet hand watch produced by combined SLM and SPS approaches. Young Ceramists Additive Manufacturing Forum, 3rd-4th May, YCAM 2018, Padua, Italy .
1.1.
2008
Arani, A. Ghorbanpour; Rahmani, R.; Arefinanesh, A.; Golabi, S. (2008). Buckling analysis of multi-walled carbon nanotubes under combined loading considering the effect of small length scale. Journal of Mechanical Science and Technology, 22 (3), 429−439. DOI: 10.1007/s12206-007-1045-2.
1.1.
2008
Arani, A. Ghorbanpour; Rahmani, R.; Arefmanesh, A. (2008). Elastic buckling analysis of single-walled carbon nanotube under combined loading by using the ANSYS software. Physica E-Low-Dimensional Systems & Nanostructures, 40 (7), 2390−2395. DOI: 10.1016/j.physe.2007.11.011.
18.02.2021

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 3 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
IUTIUT19-29 Mitmeastmeliselt struktureeritud keraamika-baasil komposiitmaterjalid kasutamiseks ekstreemtingimustes 01.01.201431.12.2019Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond; Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 1 770 000,00 EUR
PRGPRG643Biojäljendatud tehnostruktuurid triboloogilisteks rakendusteks01.01.202031.12.2024Irina HussainovaTallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 514 250,00 EUR
1.1.5.3.4.1.3.2.ETAG18012Ülikõvu osakesi sisaldavad kestvad keraamikakomposiidid kulumiskindlate lõikeriistade valmistamiseks01.09.201831.08.2021Maksim AntonovTallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 75 000,00 EUR