See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Harri Lille

https://etis.ee/CV/Harri_Lille/est
26.06.1941
+3727313181
harri.lille@emu.ee
Ained: MI.0236 Insenerigraafika I (3.0 EAP), MI.0114 Insenerigraafika (4.0 EAP), MI.0943 Materjalide- ja konstruktsioonide mehaanika (8.0 EAP), MI.0116 Tugevusõpetus (8.0 EAP).

Teenistuskäik

Töökohad ja ametid
01.09.2016–...   
Eesti Maaülikool, Metsandus- ja maaehitusinstituut, Emeriitdotsent (1,00)
01.09.2011–31.08.2016   
Eesti Maaülikool, Metsandus- ja maaehitusinstituut, Dotsent (0,50)
1991–2011   
Eesti Maaülikool, Metsandus- ja maaehitusinstituut, Dotsent (1,00)
01.01.1989–31.12.1991   
Eesti Põllumajandusülikool; Lektor (1.0)
01.01.1976–31.12.1978   
Eesti Maaehitusprojekti van ins;
01.01.1976–31.12.1989   
Eesti Põllumajandusülikool; Assistent (1.0)
 
 
Haridustee
1987–...   
Tallinna Polütehniline Instituut; füüsika-matemaatika kand.
1973–1976   
Eesti Põllumajandusakadeemia; Ehitusmehaanika kateeder; Aspirantuur
1965–1971   
Eesti Põllumajandusakadeemia, Põllumajanduse mehhaniseerimise teaduskond; Diplomiõpe, õhtuse osakonna üliõpilane
1957–1965   
Tartu I Töölisnoorte keskkooli õpilane (vaheaegadega);

Kvalifikatsioon

Teaduskraadid
Harri Lille, doktorikraad, 1987, (juh) Jakub Kõo, Определение остаточных напряжений в покрытиях методом замера деформации тонкостенной полосовой подложки (Jääkpingete määramine pinnetes õhukeseseinalise ribaaluse deformatsiooni mõõtmise meetodiga), Tallinna Polütehniline Instituut.
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS KLASSIFIKAATOR: T155 Pinded ja pinnatehnoloogia; TÄPSUSTUS: Jääkpingete eksperimentaalmehaanika
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; TÄPSUSTUS: Jääkpingete experimentaalmehaanika

Lõppenud projektid

Juhendamisel väitekirjad

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2016
Lille, H.; Kõo, J.; Ryabchikov, A.; Reitsnik, R.; Sergejev, F.; Matvejev, D. (2016). Comparison of Some Mechanical and Physical Methods for Measurement of Residual Stresses in Brush-Plated Nickel Hardened Gold and Silver Coatings. Materials Science, 22 (1), 36−40.10.5755/j01.ms.22.1.7439.
3.1.
2015
Sooru, M.; Kasepuu, K.; Kask, R.; Lille, H. (2015). Impact of Wetting/Oven-Drying Cycles on the Mechanical and Physical Properties of Birch Plywood. In: Rucevskis, S; Bajare, D (Ed.). 2ND INTERNATIONAL CONFERENCE ON INNOVATIVE MATERIALS, STRUCTURES AND TECHNOLOGIES (1−8). Riga, Latvia: IOP Publishing Ltd. ( IOP Conference Series-Materials Science and Engineering; 96). DOI: 10.1088/1757-899X/96/1/012075.
3.1.
2015
Kallau, S.; Kask, R.; Lille, H.; Ryabchikov, A. (2015). Impact of Wetting/Oven Drying Cycles on the Mechanical and Physical Properties of Oriented Broad. Civil Engineering '15, 5: 5th International Scientific Conference Proceedings, 14.-15.05, 2015. Jelgava, Latvia: Latvia University of Agriculture, 59−63.
3.4.
2015
Lille, Harri; Ruus, Aime (2015). Forms Used for Graphic Representation of an Object in Engineering Graphics. Scientific Proceedings of the 13th International Conference on Engineering Graphics BALTGRAF-13: The 13th International Conference on Engineering Graphics BALTGRAF-13; Vilnius Gediminas Technical University,June 25-26, 2015. Ed. Edgaras Timinskas. Vilnius Gediminas Technical University: Vilnius Gediminas Technical University Press "Technika", 58−61.
3.1.
2014
Lille, H.; Kõo, J.; Ryabchikov, A.; Reitsnik, R.; Sergejev, F.; Mikli, V. (2014). Comparative Analysis of Residual Stresses Determined by Various Methods in Brush-Plated Hard Gold and Silver Coatings. In: Loča, D. (Ed.). Engineering Materials and Tribology XXII (8−11). Trans Tech Publications Ltd. (Key Engineering Materials; 604). DOI: 10.4028/www.scientific.net/KEM.604.8.
3.1.
2014
Lille, H.; Kõo, J.; Valgur, J.; Ryabchikov, A.; Reitsnik, R.; Veinthal, R. (2014). Measurement of residual stresses in the cold-rolled Fe-Ni-Mn/Invar thermo-bimetallic plate. In: Materials Science Forum (101−106). Trans Tech Publications Ltd.
3.1.
2014
Lille, H.; Ryabchikov, A.; Lind, L.; Sergejev, F.; Adoberg, E.; Peetsalu, P. (2014). On determination of residual stresses in some PVD coatings by the curvature method. Proceedings of the 9th International Conference of DAAAM Baltic INDUSTRIAL ENGINEERING: 9th International DAAAM Baltic Conference, Tallinn, Estonia, 24-26 April 2014. Ed. T. Otto. Tallinn: Tallinn University of Technology, 378−382.
3.1.
2014
Lille, H.; Kõo, J.; Ryabchikov, A.; Reitsnik, R.; Sergejev, F.; Dong, M. (2014). Relaxation of residual stresses in brush-plated gold and silver coatings on copper and on brass substrates. In: Advanced Materials Research (866−871). Trans Tech Publications Ltd. DOI: 10.4028/www.scientific.net/AMR.996.866.
1.2.
2013
Lille, H. (2013). Engineering drawing as a visual channel in communication medium. Agronomy Research, 11 (1), 249−254.
3.1.
2013
Lille, H.; Kõo, J.; Ryabchikov, A.; Reitsnik, R.; Veinthal, R.; Mikli, V.; Sergejev, F. (2013). Investigation of residual stresses and some elastic properties of brush-plated gold and silver coatings. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (125−130). Trans Tech Publications Ltd. (Key Engineering Materials; 527). DOI: 10.4028/www.scientific.net/KEM.527.125.
3.2.
2013
Lille, H.; Ruus, A. (2013). Engineering Graphics Education as the Foundation of Intercultural Engineering Communication. Scientific Proceedings of the 12th International Conference on Engineering Graphics BALTGRAF 2013: The 12th International Conference on Engineering Graphics BALTGRAF-2013, Riga, Latvia, June 5-7, 2013. Ed. M. Dobelis. Riga, Latvia: Riga Technical University, 135−140.
1.1.
2012
Lille, H.; Kõo, J.; Ryabchikov, A.; Veinthal, R.; Mikli, V.; Sergejev, F. (2012). Determination of modulus of elasticity, nanohardness and residual stresses in brush-plated gold and silver coatings on copper substrate. Materials Science, 18 (1), 51−56.
3.1.
2012
Siim, K.; Kask, R.; Lille, H.; Täkker, E. (2012). Study of physical and mechanical properties of birch plywood depending on moisture content. Proceedings of the 8th International Conference of DAAAM Baltic, Industrial Engineering: 8th International DAAAM Baltic Conference, Tallinn, Estonia, 19-21 April 2012. Ed. T. Otto. Tallinn: Tallinn University of Technology, 735−740.
3.1.
2012
Lille, H.; Ryabchikov, A.; Kõo, J.; Reitsnik, R.; Veinthal, R.; Mikli, V.; Sergejev, F. (2012). Comparison of values of residual stresses determined by various methods in hard nickel coatings prepared by brush-plating in sulfate solution. Proceedings of the 8th International Conference of DAAAM Baltic, Industrial Engineering: 8th International DAAAM Baltic Conference, Tallinn, Estonia, 19-21 April 2012. Ed. T. Otto. Tallinn: Tallinn University of Technology, 680−687.
3.2.
2012
Lille, Harri; Ruus, Aime (2012). On the Concepts of Representation and Communication in the Course of Engineering Graphics. Teaching Mathematics: Retrospective and Perspectives 13th Int. Conf. and 8th Nordic-Baltic conference Agrometrics Proceedings: Joint Conference Teaching Mathematics: Retrospective and Perspectives 13th Int. Conf. and 8th Nordic-Baltic conference Agrometrics , 30.05-01.06.2012, Tartu, Estonia. Ed. Erge Ideon, Eve Aruvee. Eesti Maaülikool, 167−176.
3.2.
2012
Lille, Harri; Ruus, Aime (2012). Engineering Drawing as an Immediate Medium in a Communication Model of the Design Object. Proceedings of 15th International Conference on Geometry and Graphics: 15th International Conference on Geometry and Graphics, Montreal Canada, August 1-5, 2012. Ed. Paul Zsombor-Murray, Aaron Sprecher, Bruno Angeles. 403−409.
3.1.
2011
Lille, Harri; Kõo, Jakub; Gregor, Andre; Ryabchikov, Alexander; Sergejev, Fjodor; Traksmaa, Rainer; Kulu, Priit (2011). Comparison of curvature and X-Ray methods for measuring of residual stresses in hard PVD coatings. Materials Science Forum , 681, 455−460. DOI: 10.4028/www.scientific.net/MSF.681.455.
3.1.
2011
Ryabchikov, Alexander; Lille, Harri; Toropov, Stanislav; Kõo, Jakub; Pihl, Toomas; Veinthal, Renno (2011). Determination of residual stresses in thermal and cold sprayed coatings by the hole-drilling method. Materials Science Forum , 681, 171−176.
3.2.
2011
Lille, Harri; Ruus, Aime; Leopold, Cornelie (2011). Engineering Drawing as a System of Visual Signs for Depicting the Design Object. Proceedings of the Eleventh International Conference, Tallinn, Estonia, June 9-10, 2011: The Eleventh International Conference BALTGRAF-11, Tallinn, Estonia, June 9-10, 2011. Tallinn: Tallinn University of Technology, 105−110.
1.2.
2010
Lille, Harri; Ruus, Aime (2010). Engineering Graphics: Semiotic Aspects. The Journal of Polish Society for Geometry and Graphics, 20, 17−21.
3.1.
2010
Lille, H.; Kõo, J.; Ryabchikov, A.; Toropov, S.; Veinthal, R.; Surzhenkov, A. (2010). Comparative analysis of residual stresses in flame-sprayed and electrodeposited coatings using substrate deformation and hole-drilling methods. Proceedings of the 7th International Conference of DAAAM Baltic, Industrial Engineering: 7th International Conference of DAAAM Baltic, Industrial Engineering, Tallinn, Estonia, April 22-24, 2010. Ed. R. Kyttner. Tallinn: Tallinn University of Technology, 474−479.
3.2.
2010
Lille, Harri; Ruus, Aime; Leopold, Cornelie (2010). Use of Semiotic Approach in Teaching of the Engineering Graphics Course. Proceeding of the 14th International Conference on Geometry and Graphics: August 5- 9, 2010, Kyoto, Japan. Ed. Naomi Ando, Takashi Kanai, Jun Mitani, Aya Saito and Yasushi Yamaguchi. Kyoto, 6p. (Paper 168 ).
3.1.
2009
Lille, H.; Kõo, J.; Ryabchikov, A.; Laaneots, R. (2009). Residual stresses in brush-plated gold coating. Proceedings of the 57th Annual Conference on Applications of the X-ray Analysis and the 8th International Conference on Residual Stresses: 57th Annual Conference on Applications of the X-ray Analysis and the 8th International Conference on Residual Stresses, Denver, Colorado, USA, 4-8 August 2008. Ed. Blanton, T.; Noyan, I.C. USA, Pennsylvania: International Centre for Diffraction Data (ICDD), 320−327. (Advances in X-ray Analysis; 52).
3.1.
2009
Lille, H.; Kõo, J.; Ryabchikov, A. (2009). Residual stresses analysis in brush-plated galvanic coatings deposited from nickel sulfate electrolyte. Proceedings of the 57th Annual Conference on Applications of X-ray Analysis and the 8th International Conference on Residual Stresses: 57th Annual Conference on Applications of X-ray Analysis and the 8th International Conference on Residual Stresses, Denver, Colorado, USA, 4-8 August 2008. Ed. Blanton, T.; Noyan, I.C. USA, Pennsylvania: International Centre for Diffraction Data (ICDD), 706−713. (Advances in X-ray Anaysis; 52).
3.2.
2009
Lille, Harri; Ruus, Aime (2009). Semiotic Aspects of Engineering Graphics. Proceedings of 10th International Conference on Engineering Graphics BALTGRAF-10: 10th International Conference on Engineering Graphics BALTGRAF-10, June 4-5, 2009, Vilnius. Ed. Daiva Makutėnienė. Vilnius: Vilnius Gediminas Technical University Press "Technika", 72−80.
5.2.
2009
Gregor, A.; Lille, H.; Kõo, J.; Sergejev, F.; Traksmaa, R.; Sivitski, A.; Kulu, P. (2009). Evaluation of mechanical properties and residual stresses of hard PVD coatings. 18th International Baltic Conference Engineering Materials & Tribology BaltMatTrib-2009, October 22-23, 2009, Tallinn, Estonia : Abstracts. Tallinn: Tallinn University of Technology, 34.
1.1.
2008
Lille, H.; Kõo, J.; Ryabchikov, A. (2008). On investigation of residual stresses in brush-plated silver coating. Materials Science (Medžiagotyra), 14 (3), 226−229.
1.2.
2008
Lille, H.; Kõo, J.; Pihl, T. (2008). Measurement of residual stresses in brush-plated gold and silver coatings on thin cross-cut ring substrate. Latvijas Kimijas Žurnals (Latvian Journal of Chemistry), 1, 48−54.
3.1.
2008
Lille, H.; Kõo, J.; Ryabchikov, A.; Laaneots, R. (2008). Relaxation of residual stresses in brush-plated gold coating. Proceedings of the 6th International Conference of DAAAM Baltic, Industrial Engineering: 6th International Conference of DAAAM Baltic, Industrial Engineering, Tallinn, Estonia, April 24-26, 2008. Ed. R. Kyttner, T. Otto. Tallinn: Tallinn University of Technology, 491−496.
3.2.
2008
Lille, Harri; Pajumägi, Aime (2008). Semiotic Aspects in the Teaching of Engineering Graphics. Proceedings of 13th International Conference on Geometry and Graphics.: 13th International Conference on Geometry and Graphics. Dresden, August 4-8, 2008. Dresden,.
3.4.
2008
Lille, Harri; Pajumägi, Aime (2008). Applying Some Methods of Semiotics to Teaching of Engineering Graphics. Proceedings of the Ninth International Conference on Geometry and Engineering Graphics: ENGINEERING GRAPHICS BALTGRAF-9. Ninth International Conference on Geometry and Engineering Graphics. Riga, (Latvia), June 5-6, 2008. Riga Technical University, 212−217.
1.1.
2006
Ryabchikov, A.; Lille, H.; Laaneots, R. (2006). Evaluation of Uncertainties of Measurement for Residual Stresses in Coatings Determined by the Dilatometric Method. Materials Science Forum , 524-525, 259−264.
1.1.
2006
Lille, H.; Kõo, J.; Ryabchikov, A.; Pihl, T. (2006). Measurement of Residual Stresses in Electrochemically Metallized Coatings on Thin Cross-Cut Ring Substrate. Materials Science Forum , 524-525, 873−878.
3.1.
2006
Lille, H.; Kõo, J.; Ryabchikov, A.; Laaneots, R.; Pihl, T. (2006). Residual Stresses in Different Brush-Plated Coatings. Proceedings of the 5th International Conference of DAAAM Baltic "Industrial engineering - adding innovation capacity of labour force and entrepreneur": 20-22 April 2006, Tallinn, Estonia: (Ed.) Kyttner, R.: 5th International Conference of DAAAM Baltic "Industrial engineering - adding innovation capacity of labour force and entrepreneur": 20-22 April 2006, Tallinn, Estonia. Tallinn: Tallinn University of Technology, 273−278.
3.4.
2006
Lille, Harri; Pajumägi, Aime (2006). About Graphic Model and Methods of Technical Drawing. Proceedings of the Eighth International Conference.: Eighth International Conference ENGINEERING GRAPHICS BALTGRAF-8. Tallinn, June 8-9, 2006. Tallinna Tehnikaülikooli Kirjastus, 51−55.
1.2.
2005
Lille, Harri; Kõo, Jakub (2005). Determination of the Modulus of Elasticity, Poisson's Ratio and the Coefficient of Thermal Expansion of Electrochemically Metallized Nickel Coating. Proceedings of the Lithuanian Academy of Sciences. Materials Science, 11 (4), 356−359.
3.1.
2004
Ryabchikov, A.; Lille, H. (2004). Determination of residual stresses in galvanic coating from the measured longitudinal deformation of a tubular substrate. DAAAM Proceedings, 4th International Conference Industrial Engineering-New Challenges to SME: DAAAM International Conference, Tallinn, 29.-30. April 2004. Ed. Papstel, J.; Katalinic, B. Tallinn University of Technology, 219−222.
3.1.
2004
Lille, H.; Kõo, J.; Ryabchikov, A. (2004). Measurement of residual stresses in the coating deposited by brush-plating on a thin-walled short cylinder. DAAAM Proceedings, 4th International Conference Industrial Engineering-New Challenges to SME: DAAAM International Conference, Tallinn, 29-30 April 2004. Ed. Papstel, J; Katalinic, B. Tallinn: Tallinn University of Technology, 207−210.
1.2.
2003
Ryabchikov, Alexander; Lille, Harri; Kõo, Jakub (2003). Determination of residual stresses in a galvanic coating. Proceedings of the Estonian Academy of Sciences. Engineering, 9 (4), 281−292.
1.1.
2002
Ryabchikov, A.; Lille, H.; Kõo, J. (2002). A Device for Determination of Residual Stresses in Galvanic Coatings From the Measured Longitudinal Deformation of a Strip Substrate. Materials Science Forum , 404-407, 263−268.
1.1.
2002
Kõo, J.; Lille, H.; Ryabchikov, A. (2002). On Determination of Residual Stresses in Coatings From the Measured Longitudinal Deformation of a Strip Substrate. Materials Science Forum , 404-407, 849−854.
1.2.
2002
Lille, H.; Kõo, J.; Ryabchikov, A. (2002). Measurement of Residual Stresses in Different Electrochemical Metallized Coatings. Proceedings of the Lithuanian Academy of Sciences. Materials Science, 8 (4), 417−420.
3.1.
2000
Kulu, P.; Veinthal, R.; Kõo, J.; Lille, H. (2000). Mechanism of abrasion-erosion wear of sprayed coatings. In: Miannay, D.; Costa, P.; François, D.; Pineau, A. (Ed.). In: Proceedings of EUROMAT 2000 „Advances in mechanical behaviour, plasticity and damage“: 7-9 November 2000, Tours, France (651−656). . Elsevier.
3.2.
2000
Lille, Harri; Ryabchikov, Alexander (2000). A device for investigation of residual stresses in coatings from measured longitudinal deformation of a wire substrate. Proceedings of 19th Symposium on Experimental Mechanics of Solids: 18-20 October 2000, Jachranka, Poland: 19th Symposium on Experimental Mechanics of Solids: 18-20 October 2000, Jachranka, Poland. Warsaw: Warsaw University of Technology: Politechnika Warszawska, 367−372.
1.2.
1999
Lille, H.; Kõo, J.; Kulu, P.; Pihl, T. (1999). On Residual Stresses in Flame Sprayed Coatings. Proceedings of the Lithuanian Academy of Sciences. Materials Science, 2 (9), 27−29.
13.11.2020

Harri Lille

https://etis.ee/CV/Harri_Lille/eng
26.06.1941
+3727313181
harri.lille@emu.ee

Career

Institutions and positions
01.09.2016–...   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Associate Professor emeritus (1,00)
01.09.2011–31.08.2016   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Associate Professor (0,50)
1991–2011   
Estonian University of Life Sciences, Institute of Forestry and Rural Engineering, Associate Professor (1,00)
01.01.1989–31.12.1991   
Estonian Agricultural University; Lecturer (1.0)
01.01.1976–31.12.1989   
Estonian Agricultural University; Assistant (1.0)
 
 
Education
1987–...   
Tallinn Polytechnical Institute; Cand Sc (Phys-Math)
1973–1976   
Estonian Agricultural Academy, Department of structural mechanics, Postgraduate student
1965–1971   
Estonian Agricultural Academy, Faculty of Agricultural Engeneering; Diploma study
1957–1965   
Tartu Secondary School of Working Youngs (with the intervals)

Qualifications

Academic degrees
Harri Lille, Doctor's Degree, 1987, (sup) Jakub Kõo, Определение остаточных напряжений в покрытиях методом замера деформации тонкостенной полосовой подложки (Determination of residual stresses in the coatings by the method of measuring deformation of thin-walled strip substrate), Tallinn Polytechnical Institute.
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS CLASSIFICATION: T155 Coatings and surface treatment ; SPECIFICATION: Experimental mechanics of residual stresses
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science
 
 

Completed projects

Dissertations under supervision

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2016
Lille, H.; Kõo, J.; Ryabchikov, A.; Reitsnik, R.; Sergejev, F.; Matvejev, D. (2016). Comparison of Some Mechanical and Physical Methods for Measurement of Residual Stresses in Brush-Plated Nickel Hardened Gold and Silver Coatings. Materials Science, 22 (1), 36−40.10.5755/j01.ms.22.1.7439.
3.1.
2015
Sooru, M.; Kasepuu, K.; Kask, R.; Lille, H. (2015). Impact of Wetting/Oven-Drying Cycles on the Mechanical and Physical Properties of Birch Plywood. In: Rucevskis, S; Bajare, D (Ed.). 2ND INTERNATIONAL CONFERENCE ON INNOVATIVE MATERIALS, STRUCTURES AND TECHNOLOGIES (1−8). Riga, Latvia: IOP Publishing Ltd. ( IOP Conference Series-Materials Science and Engineering; 96). DOI: 10.1088/1757-899X/96/1/012075.
3.1.
2015
Kallau, S.; Kask, R.; Lille, H.; Ryabchikov, A. (2015). Impact of Wetting/Oven Drying Cycles on the Mechanical and Physical Properties of Oriented Broad. Civil Engineering '15, 5: 5th International Scientific Conference Proceedings, 14.-15.05, 2015. Jelgava, Latvia: Latvia University of Agriculture, 59−63.
3.4.
2015
Lille, Harri; Ruus, Aime (2015). Forms Used for Graphic Representation of an Object in Engineering Graphics. Scientific Proceedings of the 13th International Conference on Engineering Graphics BALTGRAF-13: The 13th International Conference on Engineering Graphics BALTGRAF-13; Vilnius Gediminas Technical University,June 25-26, 2015. Ed. Edgaras Timinskas. Vilnius Gediminas Technical University: Vilnius Gediminas Technical University Press "Technika", 58−61.
3.1.
2014
Lille, H.; Kõo, J.; Ryabchikov, A.; Reitsnik, R.; Sergejev, F.; Mikli, V. (2014). Comparative Analysis of Residual Stresses Determined by Various Methods in Brush-Plated Hard Gold and Silver Coatings. In: Loča, D. (Ed.). Engineering Materials and Tribology XXII (8−11). Trans Tech Publications Ltd. (Key Engineering Materials; 604). DOI: 10.4028/www.scientific.net/KEM.604.8.
3.1.
2014
Lille, H.; Kõo, J.; Valgur, J.; Ryabchikov, A.; Reitsnik, R.; Veinthal, R. (2014). Measurement of residual stresses in the cold-rolled Fe-Ni-Mn/Invar thermo-bimetallic plate. In: Materials Science Forum (101−106). Trans Tech Publications Ltd.
3.1.
2014
Lille, H.; Ryabchikov, A.; Lind, L.; Sergejev, F.; Adoberg, E.; Peetsalu, P. (2014). On determination of residual stresses in some PVD coatings by the curvature method. Proceedings of the 9th International Conference of DAAAM Baltic INDUSTRIAL ENGINEERING: 9th International DAAAM Baltic Conference, Tallinn, Estonia, 24-26 April 2014. Ed. T. Otto. Tallinn: Tallinn University of Technology, 378−382.
3.1.
2014
Lille, H.; Kõo, J.; Ryabchikov, A.; Reitsnik, R.; Sergejev, F.; Dong, M. (2014). Relaxation of residual stresses in brush-plated gold and silver coatings on copper and on brass substrates. In: Advanced Materials Research (866−871). Trans Tech Publications Ltd. DOI: 10.4028/www.scientific.net/AMR.996.866.
1.2.
2013
Lille, H. (2013). Engineering drawing as a visual channel in communication medium. Agronomy Research, 11 (1), 249−254.
3.1.
2013
Lille, H.; Kõo, J.; Ryabchikov, A.; Reitsnik, R.; Veinthal, R.; Mikli, V.; Sergejev, F. (2013). Investigation of residual stresses and some elastic properties of brush-plated gold and silver coatings. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (125−130). Trans Tech Publications Ltd. (Key Engineering Materials; 527). DOI: 10.4028/www.scientific.net/KEM.527.125.
3.2.
2013
Lille, H.; Ruus, A. (2013). Engineering Graphics Education as the Foundation of Intercultural Engineering Communication. Scientific Proceedings of the 12th International Conference on Engineering Graphics BALTGRAF 2013: The 12th International Conference on Engineering Graphics BALTGRAF-2013, Riga, Latvia, June 5-7, 2013. Ed. M. Dobelis. Riga, Latvia: Riga Technical University, 135−140.
1.1.
2012
Lille, H.; Kõo, J.; Ryabchikov, A.; Veinthal, R.; Mikli, V.; Sergejev, F. (2012). Determination of modulus of elasticity, nanohardness and residual stresses in brush-plated gold and silver coatings on copper substrate. Materials Science, 18 (1), 51−56.
3.1.
2012
Siim, K.; Kask, R.; Lille, H.; Täkker, E. (2012). Study of physical and mechanical properties of birch plywood depending on moisture content. Proceedings of the 8th International Conference of DAAAM Baltic, Industrial Engineering: 8th International DAAAM Baltic Conference, Tallinn, Estonia, 19-21 April 2012. Ed. T. Otto. Tallinn: Tallinn University of Technology, 735−740.
3.1.
2012
Lille, H.; Ryabchikov, A.; Kõo, J.; Reitsnik, R.; Veinthal, R.; Mikli, V.; Sergejev, F. (2012). Comparison of values of residual stresses determined by various methods in hard nickel coatings prepared by brush-plating in sulfate solution. Proceedings of the 8th International Conference of DAAAM Baltic, Industrial Engineering: 8th International DAAAM Baltic Conference, Tallinn, Estonia, 19-21 April 2012. Ed. T. Otto. Tallinn: Tallinn University of Technology, 680−687.
3.2.
2012
Lille, Harri; Ruus, Aime (2012). On the Concepts of Representation and Communication in the Course of Engineering Graphics. Teaching Mathematics: Retrospective and Perspectives 13th Int. Conf. and 8th Nordic-Baltic conference Agrometrics Proceedings: Joint Conference Teaching Mathematics: Retrospective and Perspectives 13th Int. Conf. and 8th Nordic-Baltic conference Agrometrics , 30.05-01.06.2012, Tartu, Estonia. Ed. Erge Ideon, Eve Aruvee. Eesti Maaülikool, 167−176.
3.2.
2012
Lille, Harri; Ruus, Aime (2012). Engineering Drawing as an Immediate Medium in a Communication Model of the Design Object. Proceedings of 15th International Conference on Geometry and Graphics: 15th International Conference on Geometry and Graphics, Montreal Canada, August 1-5, 2012. Ed. Paul Zsombor-Murray, Aaron Sprecher, Bruno Angeles. 403−409.
3.1.
2011
Lille, Harri; Kõo, Jakub; Gregor, Andre; Ryabchikov, Alexander; Sergejev, Fjodor; Traksmaa, Rainer; Kulu, Priit (2011). Comparison of curvature and X-Ray methods for measuring of residual stresses in hard PVD coatings. Materials Science Forum , 681, 455−460. DOI: 10.4028/www.scientific.net/MSF.681.455.
3.1.
2011
Ryabchikov, Alexander; Lille, Harri; Toropov, Stanislav; Kõo, Jakub; Pihl, Toomas; Veinthal, Renno (2011). Determination of residual stresses in thermal and cold sprayed coatings by the hole-drilling method. Materials Science Forum , 681, 171−176.
3.2.
2011
Lille, Harri; Ruus, Aime; Leopold, Cornelie (2011). Engineering Drawing as a System of Visual Signs for Depicting the Design Object. Proceedings of the Eleventh International Conference, Tallinn, Estonia, June 9-10, 2011: The Eleventh International Conference BALTGRAF-11, Tallinn, Estonia, June 9-10, 2011. Tallinn: Tallinn University of Technology, 105−110.
1.2.
2010
Lille, Harri; Ruus, Aime (2010). Engineering Graphics: Semiotic Aspects. The Journal of Polish Society for Geometry and Graphics, 20, 17−21.
3.1.
2010
Lille, H.; Kõo, J.; Ryabchikov, A.; Toropov, S.; Veinthal, R.; Surzhenkov, A. (2010). Comparative analysis of residual stresses in flame-sprayed and electrodeposited coatings using substrate deformation and hole-drilling methods. Proceedings of the 7th International Conference of DAAAM Baltic, Industrial Engineering: 7th International Conference of DAAAM Baltic, Industrial Engineering, Tallinn, Estonia, April 22-24, 2010. Ed. R. Kyttner. Tallinn: Tallinn University of Technology, 474−479.
3.2.
2010
Lille, Harri; Ruus, Aime; Leopold, Cornelie (2010). Use of Semiotic Approach in Teaching of the Engineering Graphics Course. Proceeding of the 14th International Conference on Geometry and Graphics: August 5- 9, 2010, Kyoto, Japan. Ed. Naomi Ando, Takashi Kanai, Jun Mitani, Aya Saito and Yasushi Yamaguchi. Kyoto, 6p. (Paper 168 ).
3.1.
2009
Lille, H.; Kõo, J.; Ryabchikov, A.; Laaneots, R. (2009). Residual stresses in brush-plated gold coating. Proceedings of the 57th Annual Conference on Applications of the X-ray Analysis and the 8th International Conference on Residual Stresses: 57th Annual Conference on Applications of the X-ray Analysis and the 8th International Conference on Residual Stresses, Denver, Colorado, USA, 4-8 August 2008. Ed. Blanton, T.; Noyan, I.C. USA, Pennsylvania: International Centre for Diffraction Data (ICDD), 320−327. (Advances in X-ray Analysis; 52).
3.1.
2009
Lille, H.; Kõo, J.; Ryabchikov, A. (2009). Residual stresses analysis in brush-plated galvanic coatings deposited from nickel sulfate electrolyte. Proceedings of the 57th Annual Conference on Applications of X-ray Analysis and the 8th International Conference on Residual Stresses: 57th Annual Conference on Applications of X-ray Analysis and the 8th International Conference on Residual Stresses, Denver, Colorado, USA, 4-8 August 2008. Ed. Blanton, T.; Noyan, I.C. USA, Pennsylvania: International Centre for Diffraction Data (ICDD), 706−713. (Advances in X-ray Anaysis; 52).
3.2.
2009
Lille, Harri; Ruus, Aime (2009). Semiotic Aspects of Engineering Graphics. Proceedings of 10th International Conference on Engineering Graphics BALTGRAF-10: 10th International Conference on Engineering Graphics BALTGRAF-10, June 4-5, 2009, Vilnius. Ed. Daiva Makutėnienė. Vilnius: Vilnius Gediminas Technical University Press "Technika", 72−80.
5.2.
2009
Gregor, A.; Lille, H.; Kõo, J.; Sergejev, F.; Traksmaa, R.; Sivitski, A.; Kulu, P. (2009). Evaluation of mechanical properties and residual stresses of hard PVD coatings. 18th International Baltic Conference Engineering Materials & Tribology BaltMatTrib-2009, October 22-23, 2009, Tallinn, Estonia : Abstracts. Tallinn: Tallinn University of Technology, 34.
1.1.
2008
Lille, H.; Kõo, J.; Ryabchikov, A. (2008). On investigation of residual stresses in brush-plated silver coating. Materials Science (Medžiagotyra), 14 (3), 226−229.
1.2.
2008
Lille, H.; Kõo, J.; Pihl, T. (2008). Measurement of residual stresses in brush-plated gold and silver coatings on thin cross-cut ring substrate. Latvijas Kimijas Žurnals (Latvian Journal of Chemistry), 1, 48−54.
3.1.
2008
Lille, H.; Kõo, J.; Ryabchikov, A.; Laaneots, R. (2008). Relaxation of residual stresses in brush-plated gold coating. Proceedings of the 6th International Conference of DAAAM Baltic, Industrial Engineering: 6th International Conference of DAAAM Baltic, Industrial Engineering, Tallinn, Estonia, April 24-26, 2008. Ed. R. Kyttner, T. Otto. Tallinn: Tallinn University of Technology, 491−496.
3.2.
2008
Lille, Harri; Pajumägi, Aime (2008). Semiotic Aspects in the Teaching of Engineering Graphics. Proceedings of 13th International Conference on Geometry and Graphics.: 13th International Conference on Geometry and Graphics. Dresden, August 4-8, 2008. Dresden,.
3.4.
2008
Lille, Harri; Pajumägi, Aime (2008). Applying Some Methods of Semiotics to Teaching of Engineering Graphics. Proceedings of the Ninth International Conference on Geometry and Engineering Graphics: ENGINEERING GRAPHICS BALTGRAF-9. Ninth International Conference on Geometry and Engineering Graphics. Riga, (Latvia), June 5-6, 2008. Riga Technical University, 212−217.
1.1.
2006
Ryabchikov, A.; Lille, H.; Laaneots, R. (2006). Evaluation of Uncertainties of Measurement for Residual Stresses in Coatings Determined by the Dilatometric Method. Materials Science Forum , 524-525, 259−264.
1.1.
2006
Lille, H.; Kõo, J.; Ryabchikov, A.; Pihl, T. (2006). Measurement of Residual Stresses in Electrochemically Metallized Coatings on Thin Cross-Cut Ring Substrate. Materials Science Forum , 524-525, 873−878.
3.1.
2006
Lille, H.; Kõo, J.; Ryabchikov, A.; Laaneots, R.; Pihl, T. (2006). Residual Stresses in Different Brush-Plated Coatings. Proceedings of the 5th International Conference of DAAAM Baltic "Industrial engineering - adding innovation capacity of labour force and entrepreneur": 20-22 April 2006, Tallinn, Estonia: (Ed.) Kyttner, R.: 5th International Conference of DAAAM Baltic "Industrial engineering - adding innovation capacity of labour force and entrepreneur": 20-22 April 2006, Tallinn, Estonia. Tallinn: Tallinn University of Technology, 273−278.
3.4.
2006
Lille, Harri; Pajumägi, Aime (2006). About Graphic Model and Methods of Technical Drawing. Proceedings of the Eighth International Conference.: Eighth International Conference ENGINEERING GRAPHICS BALTGRAF-8. Tallinn, June 8-9, 2006. Tallinna Tehnikaülikooli Kirjastus, 51−55.
1.2.
2005
Lille, Harri; Kõo, Jakub (2005). Determination of the Modulus of Elasticity, Poisson's Ratio and the Coefficient of Thermal Expansion of Electrochemically Metallized Nickel Coating. Proceedings of the Lithuanian Academy of Sciences. Materials Science, 11 (4), 356−359.
3.1.
2004
Ryabchikov, A.; Lille, H. (2004). Determination of residual stresses in galvanic coating from the measured longitudinal deformation of a tubular substrate. DAAAM Proceedings, 4th International Conference Industrial Engineering-New Challenges to SME: DAAAM International Conference, Tallinn, 29.-30. April 2004. Ed. Papstel, J.; Katalinic, B. Tallinn University of Technology, 219−222.
3.1.
2004
Lille, H.; Kõo, J.; Ryabchikov, A. (2004). Measurement of residual stresses in the coating deposited by brush-plating on a thin-walled short cylinder. DAAAM Proceedings, 4th International Conference Industrial Engineering-New Challenges to SME: DAAAM International Conference, Tallinn, 29-30 April 2004. Ed. Papstel, J; Katalinic, B. Tallinn: Tallinn University of Technology, 207−210.
1.2.
2003
Ryabchikov, Alexander; Lille, Harri; Kõo, Jakub (2003). Determination of residual stresses in a galvanic coating. Proceedings of the Estonian Academy of Sciences. Engineering, 9 (4), 281−292.
1.1.
2002
Ryabchikov, A.; Lille, H.; Kõo, J. (2002). A Device for Determination of Residual Stresses in Galvanic Coatings From the Measured Longitudinal Deformation of a Strip Substrate. Materials Science Forum , 404-407, 263−268.
1.1.
2002
Kõo, J.; Lille, H.; Ryabchikov, A. (2002). On Determination of Residual Stresses in Coatings From the Measured Longitudinal Deformation of a Strip Substrate. Materials Science Forum , 404-407, 849−854.
1.2.
2002
Lille, H.; Kõo, J.; Ryabchikov, A. (2002). Measurement of Residual Stresses in Different Electrochemical Metallized Coatings. Proceedings of the Lithuanian Academy of Sciences. Materials Science, 8 (4), 417−420.
3.1.
2000
Kulu, P.; Veinthal, R.; Kõo, J.; Lille, H. (2000). Mechanism of abrasion-erosion wear of sprayed coatings. In: Miannay, D.; Costa, P.; François, D.; Pineau, A. (Ed.). In: Proceedings of EUROMAT 2000 „Advances in mechanical behaviour, plasticity and damage“: 7-9 November 2000, Tours, France (651−656). . Elsevier.
3.2.
2000
Lille, Harri; Ryabchikov, Alexander (2000). A device for investigation of residual stresses in coatings from measured longitudinal deformation of a wire substrate. Proceedings of 19th Symposium on Experimental Mechanics of Solids: 18-20 October 2000, Jachranka, Poland: 19th Symposium on Experimental Mechanics of Solids: 18-20 October 2000, Jachranka, Poland. Warsaw: Warsaw University of Technology: Politechnika Warszawska, 367−372.
1.2.
1999
Lille, H.; Kõo, J.; Kulu, P.; Pihl, T. (1999). On Residual Stresses in Flame Sprayed Coatings. Proceedings of the Lithuanian Academy of Sciences. Materials Science, 2 (9), 27−29.
13.11.2020

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Lihtotsing Tühjenda
  • Leitud 2 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
ETFETF7227Komposiitmaterjalide ja -pinnete kulumiskindluse modelleerimine01.01.200731.12.2009Renno VeinthalTallinna Tehnikaülikool, Mehaanikateaduskond23 382,46 EUR
SFSF0140091s08Kõvapinded ja pinnatehnika01.01.200831.12.2013Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond705 840,56 EUR