See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Jakob Kübarsepp

https://etis.ee/CV/Jakob_Kübarsepp/est
9.02.1947
5121901
6203354
jakob.kubarsepp@taltech.ee
AAF-1281-2020

Teenistuskäik

Töökohad ja ametid
01.09.2021–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Emeriitprofessor (1,00)
01.07.2017–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Professor (1,00)
01.01.2014–30.06.2017   
Tallinna Tehnikaülikool, Õppeprorektor (1,00)
01.02.2011–31.12.2013   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool, Professor (1,00)
2000–31.01.2011   
Tallinna Tehnikaülikool, õppeprorektor (1,00)
1997–2000   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool, Professor (1,00)
01.01.1992–31.12.1997   
aseprofessor (TTÜ materjalitehnika instituut)
01.01.1986–31.12.1992   
dotsent (TPI metallide tehnoloogia kateeder)
01.01.1985–31.12.1986   
assistent (TPI metallide tehnoloogia kateeder)
01.01.1978–31.12.1985   
vanemteadur (TPI pulbermetallurgia teaduslabor)
01.01.1975–31.12.1978   
teadur (TPI pulbermetallurgia teaduslabor)
01.01.1970–31.12.1975   
konstruktor (Eesti Teaduste Akadeemia SKB)
 
 
Haridustee
1965–1970   
Tallinna Polütehniline Instituut, mehaanikainsener (cum laude)
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2019−...   
Eesti Teadusagentuur (ETAG), nõukogu liige
2017−...   
Kristjan Jaagu stipendiuminõukogu esimees
2017−...   
Mehaanika ja tööstustehnika instituudi nõukogu liige
2016−...   
Rahvusvahelise Inseneripedagoogika Ühingu IGIP seirekomitee president
2015−...   
Eesti Teaduste Akadeemia, Informaatika ja tehnikateaduste osakonna juhataja
2015−...   
Teadusajakirja "Powder Metallurgy Progress " rahvusvahelise nõunike kogu liige
2014−...   
Teadusajakirja "Proceedings of the Estonian Academy of Sciences" toimetaja
2012−...   
SA Tallinna Tehnika ja teaduskeskus, nõukogu liige
2011−...   
Eesti Teaduste Akadeemia akadeemik, Informaatika ja Tehnikateaduste Osakond
2018−2019   
Eesti Teadusagentuur (ETAG), hindamisnõukogu liige
2016−2017   
IT Akadeemia programmi juhtkomitee liige
2014−2016   
TTÜ materjaliteaduse instituudi nõukogu liige
2014−2014   
Euroopa tehnikaülikoolide võrgustiku CESAER 2014.aasta teaduskonverentsi "Widening participation" ja üldkogu korralduskomisjoni esimees
2012−2013   
Eesti Kõrghariduse Kvaliteediagentuur, Hindamisnõukogu esimees
2011−2017   
Kristjan Jaagu stipendiumite ekspertnõukogu, liige
2011−2012   
Põhja- ja Baltimaade tehnikaülikoolide võrgustike NORDTEK- BALTECH 2012. aasta teaduskonverentsi ja üldkogu BALTECH poolne koordinaator
2010−2012   
Rahvusvaheline Füüsikaolümpiaad Eestis IPho2012, juhtkomitee liige
2008−2013   
Teadusajakiri "Estonian Journal of Engineering", toimetaja
2005−2011   
BALTECH võrgustiku aastakonverentside ( kokku 9 ) korralduskomisjoni esimees
2005−2012   
SA Archimedes Euroopa kõrghariduse programmide nõukogu liige
2005−2013   
Eestikeelsete Kõrgkooliõpikute Juhtkomitee liige
2004−2015   
Tehnikaülikoolide rahvusvahelise võrgustiku BALTECH nõukogu esimees
2003−2006   
SA TTÜ Materjalitehnoloogiate Siirdekeskuse nõukogu esimees
2000−2011   
Õppeprorektor
2000−2016   
TTÜ Materjaliuuringute keskuse nõukogu liige
1997−2000   
ETF tehnikateaduste ekspertkomisjoni liige
1994−2000   
Mehaanikateaduskonna dekaan
1994−2017   
TTÜ nõukogu liige
 
 
Loometöö
_
 
 
Lisainfo
Täienduskoolitus/enesetäiendamine :
Välismaal:
- Moskva Teraste ja Sulamite Instituut ( 4 kuud, 1987 )
- Darmstadti Tehnikaülikool ja Kieli Tehnikakõrgkool ( 1 kuu, 1994 )
- Tampere Tehnikaülikool ( 1 kuu, 1996 )

Eestis :
- Juhtide arendusprogramm ( Aprill, 2002 )
- Ülikooli valmisolek välisüliõpilaste vastuvõtuks Suurbritannia Ülikoolide näitel ( jaanuar, 2004)
- Protokoll ja etikett ( november, 2006 )
- Kõrgemad riigikaitsekursused ( oktoober, 2008 )
- EFQM European Assessor training ( august, 2009 )
- Kõrgkooli sisemise kvaliteedikindlustamise protsess ( veebruar - mai, 2010 )
- Kvaliteedijuhtimine kõrgkoolis (september 2010 , Eesti Kvaliteediühing )
- Õppekavagruppide kordushindamise ekspertide koolitus ( jaanuar 2013 ja jaanuar 2014 , EKKA)
- juhtide arendusprogramm : " Projektijuhtimine ( veebruar 2017 ).

Kutsetunnistused :
- Volitatud mehaanikainsener V ( 1998, 2005, 2015 )
- Euroinsener ( 2001)
- insener-pedagoogi kvalifikatsioon ING-PAED IGIP ( 2001)

Liikmelisus :
- European Powder Metallurgy Association ( 2001... )
- Eesti Mehhanikainseneride Liit
Juhtide arendusprogramm: "Projektijuhtimine " ( veebruar 2017)

Kvalifikatsioon

Teaduskraadid
Jakob Kübarsepp, doktorikraad, 1980, (juh) Leo Valdma, Terassideainega titaankarbiidkermiste tehnoloogia ja omadused, Moscow Institute of Fine Chemical Technology.
 
 
Teaduspreemiad ja tunnustused
2019, Jakob Kübarsepp, Tallinna Tehnikaülikooli aasta arendustöö 2018 (II koht )
2011, Jakob Kübarsepp, Eesti Teaduste Akadeemia, akadeemik
2007, Jakob Kübarsepp, Eesti Haridus- ja Teadusministeeriumi teenetemärk
2006, Jakob Kübarsepp, Valgetähe IV klassi teenetemärk
2005, Jakob Kübarsepp, Eesti Vabariigi Teaduspreemia, "Mikro- ja nanotehnoloogiliste uurimismeetodile arendamine tööstuslike materjalide väljatöötamiseks"
2005, Jakob Kübarsepp, Tallinna Tehnikaülikooli teenetemedal Mente et Manu
2001, Jakob Kübarsepp, Euroinsener EUR ING ( FEANI)
2001, Jakob Kübarsepp, Euroopa iseneride koolitaja " ING-PAED IGIP " tiitel
1985, Jakob Kübarsepp, Eesti NSV riiklik preemia
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; TÄPSUSTUS: Pulbermetallurgia ja komposiitmaterjalid, sealhulgas keraamilis-metalsed kulumiskindlad komposiidid.Materjalide kulumine ja korrosioon.
 
 
Lisainfo
tehnikadoktor,
Tallinna Tehnikaülikool, 1992;
tehnikakandidaat,
Moskva Keemilise Peentehnoloogia Instituut, 1980

Jooksvad projektid

Lõppenud projektid

Juhendamisel väitekirjad

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2020
Laansoo, A.; Kübarsepp, J.; Surženkov, A.; Land, R.; Märtens, O.; Viljus, M. (2020). Induction brazing of cermets to steel and eddy current testing of joint quality. Welding in the World, 64 (3), 563−571. DOI: 10.1007/s40194-020-00854-x.
1.1.
2020
Kübarsepp, J.; Juhani, K. (2020). Cermets with Fe-alloy binder: A review. International Journal of Refractory Metals and Hard Materials, 92, #105290. DOI: 10.1016/j.ijrmhm.2020.105290.
1.1.
2020
Kolnes, M.; Kübarsepp, J.; Sergejev, F.; Kolnes, M.; Tarraste, M.; Viljus, M. (2020). Performance of Ceramic-Metal Composites as Potential Tool Materials for Friction Stir Welding of Aluminium, Copper and Stainless Steel. Materials, 13 (8), #1994. DOI: 10.3390/ma13081994.
1.1.
2020
Lille, H.; Ryabchikov, A.; Peetsalu, P.; Lind, L.; Sergejev, F.; Mikli, V.; Kübarsepp, J. (2020). Residual Stresses on Various PVD Hard Coatings on Tube and Plate Substrates. Coatings, 10 (11), 1054. DOI: 10.3390/coatings10111054.
3.1.
2020
Tarraste, M.; Kolnes, M.; Kübarsepp, J.; Juhani, K.; Viljus, M.; Külaviir, J. (2020). Green WC-FeMn cemented carbides for industrial wear parts. In: Euro PM2020 Congress Proceedings. European Powder Metallurgy Association (EPMA).
3.1.
2020
Tarraste, M.; Kübarsepp, J.; Juhani, K.; Kolnes, M.; Viljus, M.; Mere, A. (2020). Sintering of High Mn Cemented Carbides in Mn-Rich Environment. In: P. Horňak, M. Longauerová and M. Matvija (Ed.). Defect and Diffusion Forum (402−407). Trans Tech Publications. DOI: 10.4028/www.scientific.net/DDF.405.402.
3.2.
2020
Kübarsepp, J.; Kulu, P. (2020). Eesti teaduskeel inseneerias. P. Nemvalts (Toim.). Eesti teaduskeel keelterikkas maailmas (188−211). Tallinna Ülikooli Kirjastus.
1.1.
2019
Tarraste, M.; Kubarsepp, J.; Juhani, K.; Mere, A.; Viljus, M. (2019). Effect of Carbon Stabilizing Elements on WC Cemented Carbides with Chromium Steel Binder. Materials Science, 25 (2), 202−206. DOI: 10.5755/j01.ms.25.2.19619.
1.1.
2019
Kolnes, M.; Kübarsepp, J.; Sergejev, F.; Kolnes, M. (2019). Wear of potential tool materials for aluminium alloys friction stir welding at weld temperatures. Proceedings of the Estonian Academy of Sciences, 68 (2), 198−206. DOI: 10.3176/proc.2019.2.12.
3.1.
2019
Tarraste, M.; Kübarsepp, J.; Juhani, K.; Kolnes, M.; Viljus, M. (2019). High Energy Milling of WC-FeCr Cemented Carbides. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (136−141). 15.04.2019 Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.136.
3.1.
2019
Juhani, K.; Kübarsepp, J.; Tarraste, M.; Pirso, J.; Viljus, M. (2019). Microstructure Formation and Performance of Reactive Sintered titanium Oxycarbide Base Ceramic-Ceramic Composites. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (131−135). Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.131.
3.1.
2019
Lille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Mikli, Valdek; Adoberg, Eron; Vägiström, Heinar; Kübarsepp, Jakob; Peetsalu, Priidu (2019). Average residual stresses in hard physical vapor deposited (PVD) coatings. In: Kubarsepp, Jakob; Hussainova, Irina; Otto, Tauno; Karjust, Kristo (Ed.). Key Engineering Materials (20−25). Conference Modern Materials and Manufacturing, MMM 2019; Tallinn; Estonia; 24 April 2019 through 26 April 2019. Trans Tech Publications Ltd. DOI: 10.4028/www.scientific.net/KEM.799.20.
3.1.
2019
Kolnes, M.; Kübarsepp, J.; Sergejev, F.; Kolnes, M.; Tarraste, M.; Mikli, V. (2019). WEAR BEHAVIOR OF CERAMIC METAL COMPOSITES AS TOOL MATERIALS FOR FSW OF STAINLESS STEEL. In: J. Padgurskas (Ed.). Proceedings of BALTTRIB’2019 (107−112). Vytautas Magnus University. DOI: 10.15544/balttrib.2019.06.
3.2.
2019
Kübarsepp, J. (2019). Teras kulumiskindlate komposiitide tehnoloogias. T. Soomere (Toim.). Teadusmõte Eestis (X).Tehnikateadused III (108−121). Tallinn: Eesti Teaduste Akadeemia kirjastus.
6.7.
2019
Kübarsepp, Jakob (koost.); Soomere, Tarmo (toim.) (2019). Teadusmõte Eestis (X). Tehnikateadused III. Tallinn: Eesti Teaduste Akadeemia.
1.1.
2018
Tarraste, Marek; Kübarsepp, Jakob; Juhani, Kristjan; Mere, Arvo; Kolnes, Märt; Viljus, Mart; Maaten, Birgit (2018). Ferritic chromium steel as binder metal for WC cemented carbides. International Journal of Refractory Metals & Hard Materials, 73, 183−191. DOI: 10.1016/j.ijrmhm.2018.02.010.
1.1.
2018
Kolnes, M.; Mere, A.; Kübarsepp, J.; Viljus, M.; Maaten, B.; Tarraste, M. (2018). Microstructure evolution of TiC cermets with ferritic AISI 430L steel binder. Powder Metallurgy. DOI: 10.1080/00325899.2018.1447268.
3.1.
2018
Kolnes, M.; Kübarsepp, J.; Sergejev,F.; Kolnes, M. (2018). Adhesive wear of WC- and TiC-based friction stir welding tool materials for aluminium alloy welding. In: Proceedings of EuroPM2018 Congress & Exhibition, October 14 - 18, 2018, Bilbao, Spain. European Powder Metallurgy Association (EPMA).
3.1.
2018
Lille, H.; Ryabchikov, A.; Kõo, J.; Adoberg, E.; Mikli, V.; Kübarsepp, J.; Peetsalu, P. (2018). Evaluation of residual stresses in PVD coatings by means of tubular substrate length variation. In: M. Seefeldt (Ed.). Materials Research Proceedings / MRP (131−136). Materials Research Forum LLC. (Residual Stresses 2018 – ECRS-10). DOI: 10.21741/9781945291890-21.
5.2.
2018
Kulu, P.; Kübarsepp, J.; Laaneots, R. (2018). Eesti tehnikateaduskeele ja terminite arendusest Tallinna Tehnikaülikoolis. VI eesti teaduskeele konverents: VI eesti teaduskeele konverents. 7. detsember 2018. Toim. K. Allkivi-Metsoja, P. Nemvalts, H. Põlda. Tallinn: Tallinna Ülikool, 19−20.
6.6.
2018
Kübarsepp, J. (2018). Teadus vajab muutusi juba doktorantuuri tasemel. Postimees (9).31.03.2018 Tallinn.
3.1.
2017
Kolnes, M.; Kübarsepp, J.; Viljus, M.; Traksmaa, R. (2017). Technological Peculiarities of Chromium Carbide-Based Iron Alloy Bonded Cermet. In: R. Bendikienė and K. Juzėnas (Ed.). Materials Engineering 2017 (82−86). 10.10.2017 Trans Tech Publications Ltd. (Solid State Phenomena ; 267). DOI: 10.4028/www.scientific.net/SSP.267.82.
3.1.
2017
Petrov, M.; Kübarsepp, J.; Sergejev, F.; Viljus, M.; Tarraste, M. (2017). Effect of sintering method on surface fatigue of carbide composites. In: Loca. D. (Ed.). Engineering Materials and Tribology XXV (368−372). Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.368.
3.1.
2017
Kolnes, M.; Kübarsepp, J.; Sregejev, F.; Kolnes, M. (2017). Comparative Study of Adhesive Wear for CoCr, TiC-NiMo, WC-Co as Potential FSW Tool Materials. In: R. Bendikienė, K. Juzėnas (Ed.). Materials Engineering 2017 (224−228). 10.10.2017 Trans Tech Publications Ltd. (Solid State Phenomena; 267). DOI: 10.4028/www.scientific.net/SSP.267.224.
6.6.
2017
Kübarsepp, J. (2017). Õppekavade reform kõrghariduse esimesel astmel. Õpetajate leht.13.01.2017 SA Kultuurileht.
1.1.
2016
Kolnes, M.; Pirso, J.; Kübarsepp, J.; Viljus, M.; Traksmaa, R. (2016). Structure formation and characteristics of chromium carbide-iron-titanium cermets. Proceedings of the Estonian Academy of Sciences, 65 (2), 138−143.
3.1.
2016
Ivanov, R.; Mikli, V.; Kübarsepp, J.; Hussainova, I. (2016). Direct CVD growth of foliated graphene closed shells on alumina nanofibers. In: Hussainova, I.; Veinthal, R. (Ed.). Engineering Materials and Tribology (77−80). Trans Tech Publications Ltd. (Key Engineering Materials ; 674).
3.1.
2016
Tarraste, M.; Kübarsepp, J.; Juhani, K.; Suurkivi, T.; Pirso, J. (2016). Spark plasma sintering of WC hardmetals with Fe-based binder. In: World PM2016 proceedings (USB). European Powder Metallurgy Association.
3.1.
2016
Kommel, L.; Kübarsepp, J.; Tarraste, M.; Kolnes, M. (2016). Boron containing solid and superhard composites production techniques and properties. In: World PM2016 proceedings. (1−6). Shrewsbury: European Powder Metallurgy Association.
3.1.
2016
Kolnes, M.; Kübarsepp, J.; Viljus, M.; Traksmaa, R.; Illopmägi, S. (2016). Effect of sintering conditions on microstructure and performance of TiC-FeCrMn cermets. In: World PM2016 proceedings (USB). European Powder Metallurgy Association.
3.2.
2016
Kübarsepp, J. (2016). Inseneriharidus ja - teadused kõrgharidus- ja teadusmaastikul. J. Järv, A. Pöitel (Toim.). Eesti Teaduste Akadeemia aastaraamat (84−89). Tallinn: Eesti Teaduste Akadeemia.
3.3.
2016
Kübarsepp, J.; Kulu, P.; Laansoo, A.; Karjust, K.; Saarna, M. (2016). Materjalitehnika seletav sõnaraamat:eesti-inglise-vene. Tallinna Tehnikaülikooli Kirjastus.
6.6.
2016
Rüütmann, T.; Kübarsepp, J. (2016). Inseneripedagoogika - mõjusam õpetus STEM-valdkonnas. Karl Kello (Toim.). Õpetajate Leht (13). Tallinn.
1.1.
2015
Kolnes, M.; Kübarsepp, J.; Kollo, L.; Viljus, M.. (2015). Characterization of TiC-FeCrMn cermets produced by powder metallurgy method. Materials Science, 21 (3), 353−357.10.5755/j01.ms.21.3.7364.
1.1.
2015
Aghayan, M.; Gasik, M.; Hussainova, I.; Rubio-Marcos, F.; Kollo, L.; Kubarsepp, J. (2015). Thermal and microstructural analysis of doped alumina nanofibers. Thermochimica Acta, 602, 43−48.10.1016/j.tca.2015.01.009.
2.4.
2015
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Veinthal, R. (2015). Materjalitehnika : õpik kõrgkoolidele. II, Konstruktsioonimaterjalide tehnologia. Tallinn: TTÜ kirjastus.
2.4.
2015
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Veinthal, R. (2015). Materjalitehnika : õpik kõrgkoolidele. I, Tehnomaterjalid. Tallinn: TTÜ kirjastus.
3.1.
2015
Tarraste, M.; Juhani, K.; Kübarsepp, J.; Pirso, J.; Mikli, V. (2015). The Effect of Cr and C on the Characteristics of WC-FeCr Hardmetals. Euro PM2015 Congress & Exibition : proceedings : 4–7 October 2015, Reims Congress Centre, Reims, France: Euro PM2015 Congress & Exhibition, Reims, Reims, 4–7 October 2015. European Powder Metallurgy Association, 1−6.
3.1.
2015
Kommel, L.; Tarraste, M.; Kolnes, M.; Veinthal, R.; Kübarsepp, J. (2015).
 . Euro PM2015 Proceedings: Euro PM2015 Congress & Exibition - Heads to Reims, Champagne, France. Ed. EPMA. Reims, France: European Powder Metallurgy Association, x−x.
3.1.
2015
Petrov, M.; Kübarsepp, J.; Sergejev, F.; Viljus, M. (2015). Effect of carbide phase and binder chemical composition on surface fatigue of carbide composites. In: Euro PM2015 Congress & Exhibition Proceedings (xx−xx). European Powder Metallurgy Association.
6.6.
2015
Kübarsepp, J. (2015). Maailima ja Eesti kõrghariduse trendid. Elektriala, 5, 8−10.
1.1.
2014
Kübarsepp, J.; Pirso, J.; Juhani, K. (2014). Developments in cermet design, technology and performance. International Journal of Materials & Product Technology, 49, 160−179.
1.1.
2014
Hussainova, I.; Antonov, M.; Voltsihhin, N.; Kübarsepp, J. (2014). Wear behaviour of Co-free hardmetals doped by zirconia and produced by conventional PM and SPS routines. Wear, 312, 83−90. DOI: 10.1016/j.wear.2014.01.014.
3.1.
2014
Voltsihhin, N.; Hussainova, I.; Kübarsepp, J.; Traksmaa, R. (2014). Processing and mechanical properties of ZrC-ZrO2 composites. In: Dagnija Loca (Ed.). Engineering Materials & Tribology XXII (258 −261).. Trans Tech Publications Ltd. (Key Engineering Materials; 604).
5.2.
2014
HUssainova, I.; Anoshkin, I.; Ivanov, R.; Kübarsepp, J. (2014). Novel alumina–nanocarbon hybrids. Book of abstracts of 38th International Conference & Exposition on Advanced Ceramics & Composites: 38th International Conference & Exposition on Advanced Ceramics & Composites, Daytona beach, FL, USA; 25.01 - 31.01.2014. USA: American Ceramic Society, 117.
6.6.
2014
Kübarsepp, J., Urbla, A. (2014). Vastuvõtust TTÜ-sse 2014. Inseneeria, 11, 40−42.
3.1.
2013
Kübarsepp, J.; Klaasen, H.; Tšinjan, A.; Juhani, K.; Kollo, L.; Viljus, M. (2013). Influence of pressurized sintering on performance of TiC-based cermets. Hussainova, I.. Engineering Materials and Tribology (56−61).. Trans Tech Publications Ltd. (Key Engineering Materials; 527).
3.2.
2013
Kübarsepp, J. (2013). Ülikoolid ja teadlased ühiskonda teenimas. Mõtus, L. (Toim.). Eesti Teaduste Akadeemia Aastaraamat (233−236).. Tallinn: Eesti Teaduste Akadeemia Kirjastus.
3.2.
2013
Kübarsepp, J.; Pirso, J.; Juhani, K. (2013). Influence of sintering technology on cermet performance. BALTTRIB´2013, Kaunas, Lithuania 14-15 nov 2013. Aleksandras Stulginskis University; Akademija, Kaunas, Lithuania, 56−61.
3.2.
2013
Hussainova, I.; Antonov, M.; Kübarsepp, J. (2013). Advanced cermets as tribomaterials. Proceedings of the 5th World Tribology Congress: 5th World Tribology Congress; WTC13, September 8 – 13, 2013; Torino, Italy. Italy: Italian Tribology Association.
3.3.
2013
Kübarsepp, J.; Kulu, P.; Laansoo, A.; Karjust, K.; Saarna, M. (2013). Materjalitehnika seletav sõnaraamat. Eesti - inglise - vene. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.6.
2013
Kübarsepp, J.; Kulu, P. (2013). Terminoloogiaarendus tehnikavaldkonnas. Sirp (2−3).. Sihtasutus Kultuurileht.
1.2.
2012
Laansoo, A.; Kübarsepp, J.; Vainola, V.; Viljus, M. (2012). Induction brazing of cermets to steel. Estonian Journal of Engineering, 18 (3), 232−242. DOI: 10.3176/eng.2012.3.08.
1.2.
2012
Tšinjan, A.; Klaasen, HeH.nrich; Kübarsepp, J.; Adoberg, E.; Sergejev, F.;Talkop, A. (2012). Wear performance of PVD coated steels. Estonian Journal of Engineering, 18 (3), 202−210. DOI: 10.3176/eng.2012.3.05.
3.1.
2012
Sergejev, F.; Petrov, M.; Kübarsepp, J. (2012). Determination of the mechanical properties of carbide composites by spherical indentation. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 2: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Ed. T. Otto. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 723−728.
1.1.
2011
Klaasen, H.; Kübarsepp, J.; Tšinjan, A.; Sergejev, F. (2011). Performance of carbide composites in cyclic loading wear conditions. Wear, 271, 837−841. DOI: 10.1016/j.wear.2011.03.005.
1.1.
2011
Antonov, M.; Hussainova, I.; Kübarsepp, J.; Traksmaa, R. (2011). Oxidation-abrasion of TiC-based cermets in SiC medium. Wear, 273 (1), 23−31. DOI: 10.1016/j.wear.2011.05.005.
1.1.
2011
Sergejev, F.; Klaasen, H.; Kübarsepp, J.; Preis, I.. (2011). Fatigue mechanics of carbide composites. International Journal of Materials and Product Technology, 40, 140−163. DOI: 10.1504/IJMPT.2011.037210.
1.2.
2011
Kübarsepp, J.; Klaasen, H.; Viljus, M.; Traksmaa, R.; Sergejev, F. (2011). Behaviour of carbide composites in different operation conditions. Powder metallurgy progress, 11, 258−264.
3.1.
2011
Kübarsepp, J.; Klaasen, H.; Tsinjan, A.; Roosaar, T.; Annuka, H. (2011). Wear performance of WC- and TiC- based ceramic-metallic composites. In: Proceedings of VI International Scientific Conference BALTTRIB 2011 (150−155).. Kaunas, Lithuania: Lithuanian University of agriculture.
3.1.
2011
Sergejev, F.; Klaasen, H.; Kubarsepp, J. (2011). Effect of Residual Stresses on the Surface Fatigue of TiC-based Carbide Composites. In: Mario Guagliano, Laura Vergani (Ed.). 11th International Conference on the Mechanical Behavior of Materials (ICM11) (3152−3161). . Elsevier. DOI: 10.1016/j.proeng.2011.04.522.
3.1.
2011
Tsinjan, A.; Klaasen, H.; Kübarsepp, J.; Adoberg, E.; Talkop, A.; Viljus, M. (2011). Performance of tool steels strengthened by PVD coatings in adhesion and cyclic loading wear conditions. In: Proceedings of EURO PM 2011 Congress & Exhibition, October 9-12, 2011, Barcelona, Spain (455−461). Shrewsbury, UK: European Powder Metallurgy Association.
3.2.
2011
Kübarsepp, J. (2011). Reformid Eesti kõrghariduses läbi kahe aastakümne = Reforms in Estonian Higher Education system during two decades. Leili Utno (Toim.). Kakskümmend aastat taasiseseisvust Eestis, 1991-2011 : ettekannete kokkuvõtted teaduskonverentsil "20 aastat taasiseseisvust Eestis, 1991-2011", 20.augustil 2011 Tallinnas = Twenty Years of Restored Statehood in Estonia, 1991-2011 : The Proceedings of Scientific Conference "20 Years of Restored Statehood in Estonia, 1991-2011" 20th August 2011 Tallinn (131−165).. Tallinn: Kirjastus "VÄLIS-EESTI".
3.2.
2011
Antonov, M.; Hussainova, I.; Kers, J.; Kulu, P.; Kübarsepp, J.; Veinthal, R. (2011). Advanced multifunctional materials and their applications. In: Research in Estonia. Present and Future. (146−167). . Estonian Academy of Sciences.
3.2.
2011
Kübarsepp, J. (2011). Suundumused doktoriõppes Euroopa teadus- ja kõrgharidusruumis. Eesti Teaduste Akadeemia Aastaraamat (234−236).. Tallinn: Eesti Teaduste Akadeemia Kirjastus.
3.3.
2011
Kübarsepp, J. (2011). eesti-inglise-vene terminisõnastik: Survetöötlus. 1−55.
3.3.
2011
Kübarsepp, J. (2011). Eesti-inglise-vene terminisõnastik:Valutehnoloogia. 1−60.
3.5.
2011
Kübarsepp, J.; Mägi, V. (2011). Eesti teaduskeele arendamine ja kasutamine tehnika, tehnoloogia ja majanduse valdkonnas. Peeter Päll (Toim.). Eestikeelne ülikool.3.detsembril 2009 peetud terminoloogiakonverentsi ettekanded (36−45).. Tartu: Tartu Ülikooli Kirjastus.
5.1.
2011
Sergejev, F.; Preis, I.; Kübarsepp, J. (2011). Fatigue strength prediction of carbide composites by considering pores to be equivalent to small defects: Effect of hot isostatic pressing. Book of abstracts: International Symposium on Fatigue Design and Material Defects, Trondheim, Norway. 23-25 May 2011. Ed. Gunnar Härkegård. NTNU, 41−42.
5.1.
2011
Sergejev, F.; Preis, I.; Kübarsepp, J. (2011). Correlation between surface fatigue and microstructural defects of cemented carbides: Experimental validation. Book of abstracts: International Symposium on Fatigue Design and Material Defects, Trondheim, Norway. 23-25 May 2011. Ed. Gunnar Härkegård. NTNU, 32−33.
1.1.
2010
Klaasen, H.; Kübarsepp, J.; Laansoo, A.; Viljus, M. (2010). Reliability of dual compounds "carbide composite + steel" produced by diffusion welding. International Journal of Refractory Metals and Hard Materials, 28 (5), 580−586.10.1016/j.ijrmhm.2010.03.005.
1.1.
2010
Klaasen, H.; Kübarsepp, J.; Roosaar, T.;Viljus, M.; Traksmaa, R. (2010). Adhesive wear performance of hardmetals and cermets. Wear, 268, 1122−1128.10.1016/j.wear.2010.01.006.
3.1.
2010
Laansoo, A.; Kübarsepp, J.; Vainola, V. (2010). Brazing of TiC cermet to steel. Proceedings of the International Conference of DAAAM Baltic "Industrial Engineering", 1: 7th International Conference of DAAAM Baltic "Industrioal Engineering", Tallinn, Estonia,22-24 April 2010. Ed. R.Küttner. Tallinn: Tallinn Technical University Press, 480−485.
3.1.
2010
Klaasen, H.; Kübarsepp, J.; Tšinjan, A.; Adoberg, E.; Vainola, V. (2010). Performance of tool steels strengthened by PVD coatings. Proceedings of International Powder Metallurgy Congress and Exhibition, Florence, Italy, 10-14 October 2010, 3: EURO PM2010, Florence, Italy, 10th-14th October 2010. European Powder Metallurgy Association, -.
5.2.
2010
Sergejev, F.; Klaasen, H.; Kübarsepp, J.; Traksmaa, R. (2010). Effect of microstructure and residual stresses on the wear resistance and durability of steel bonded TiC cermets. In: Abstracts of International Conference on Fatigue Damage of Structural Materials - ICFDSM VIII, 18-24 September 2010 (1). . Hyannis, MA, USA: Oxford Abstracts Ltd.
6.3.
2010
Kübarsepp, J.;Mägi, V. (2010). Eesti teaduskeele arendamine ja kasutamine tehnika, tehnoloogia ja majanduse valdkonnas. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2009 (251−256).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2009
Klaasen, H.; Kübarsepp, J.; Sergejev, F. (2009). Strength and failure of TiC based cermets. Powder Metallurgy, 52 (2), 111−115. DOI: 10.1179/174329008X315575.
1.2.
2009
Tšinjan, A.; Klaasen, H.; Kübarsepp, J.; Annuka, H. (2009). Influence of sintering techniques on the performance characteristics od steel-bonded TiC-based cermets. Estonian Journal of Engineering, 15 (4), 283−292.
3.2.
2009
Klaasen, H.; Roosaar, T.; Kübarsepp, J.; Tšinjan, A. (2009). Performance and Failure of Carbide Composites in Different Wear Conditions. EURO PM2009 Proceedings Vol 1, 1: EURO PM2009, Copenhagen, Denmark, 12th-14th October 2009. European Powder Metallurgy Association, 317−322.
3.3.
2009
Kübarsepp, J. (2009). Eesti-inglise- vene terminisõnastik:Metallurgia, pulbermetallurgia. 1−72.
6.3.
2009
Kübarsepp, J.; Mägi, V. (2009). Eesti keel õppe- ja teaduskeelena tehnikahariduses. Mägi, V.. Tallinna Tehnikaülikooli aastaraamat 2008 (355−360).. Tallinn: TTÜ kirjastus.
1.1.
2008
Roosaar, T.; Kübarsepp, J.; Klaasen, H.; Viljus, M. (2008). Wear Performance of TiC-base Cermets. Materials Science (Medžiagotyra), 14 (3), 238−241.
1.1.
2008
Sergejev, F.; Preis, I.; Hussainova, I.; Kübarsepp, J. (2008). Fatigue mechanics of TiC-based cemented carbides. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, 222: 34th Leeds-Lyon Symposium on Tribology; Lyon, September 4–7, 2007. London, UK: Professional Engineering Publishing, 201−209.
3.1.
2008
Sergejev, F.; Antonov, M.; Gregor, A.; Hussainova, I.; Kulu, P.; Kübarsepp, J. (2008). Investigation of the Surface Fatigue of Carbide Composites and PVD Hard Coatings. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (543−548). . Tallinn: Tallinn University of Technology.
3.1.
2008
Teichmann, M.; Kübarsepp, J.; Ilvest, J. Jr. (2008). Students' Self-management: E-Course, E-Tutoring and Online Support System. In: Iskander, M. (Ed.). Innovative Techniques in Instruction Technology, E-learning, E-assessment and Education (304−308).. USA: Springer.
3.1.
2008
Teichmann, M.; Kübarsepp, J. (2008). Students' Preparation for, and Coping with, Tertiary Level Science and Engineering Education. In: Holbrook, J., Rannikmäe, M., Reiska, P., Ilsley, P. (Ed.). The Need for a Paradigm Shift in Science Education for Post-Soviet Societies : Research and Practice (Estonian Example) (184−198).. Frankfurt am Main, Berlin, Bern, Bruxelles, New York, Oxford, Wien: Lang.
3.1.
2008
Roosaar, T.; J.Kübarsepp, J.; Klaasen, H.; Viljus, M. (2008). Adhesion wear performance of carbide-base composites. Proceedings of the 13th Nordic Symposium in Tribology, Nordtrib 2008, Tampere, Finland: 13th Nordic Symposium in Tribology, Nordtrib 2008, June 10-13, 2008, Tampere, Finland. Ed. Kleemola, J.; Lehtovaara, A. Tampere University of Technology, 10 pp.
3.2.
2008
Kollo, L.; Kübarsepp, J. (2008). Grain Size-Dependent Mechanical and Wear Properties of TiC-FeNi Steel Cermets. Advances in Powder Metallurgy & Particulate Materials—2008, Proceedings of the 2008 World Congress on Powder Metallurgy & Particulate Materials, 10: 2008 World Congress on Powder Metallurgy & Particulate Materials; June 8–12, Washington, D.C.. Princeton, New Jersey : Metal Powder Industry Publications, 90−95.
3.2.
2008
Klaasen, H.; Kübarsepp, J.; Roosaar, T.; Sergejev, F.; Talkop, A. (2008). Performance of carbide composites in cyclic loading conditions. Proceedings of Euro PM2008, 1: European Powder Metallurgy Conference & Exhibition Euro PM2008, Mannheim, Germany, 28.09-1.10.2008. European Powder Metallurgy Association, 237−242.
3.4.
2008
Teichmann, M.;Kübarsepp, J. (2008). Web-based freshmen support system at Tallinn University of Technology. Proceedings of Research Symposium on Problem Based Learning, CD-ROM: Research Symposium on Problem Based Learning (Pre-Conference to Annual SEFI Conference), Aalborg University, Denmark, June30-July1, 2008. Aalborg University,Denmark: Aalborg University Press, 10 pp.
5.2.
2008
Teichmann, M., Kübarsepp, J., Ilvest, J.Jr. (2008). Web-based Freshmen Support System at Tallinn University of Technology. Proceedings of SEFI Annual Conference 2008, Research Symposium of PBL in Engineering Education, CD-ROM: UNESCO Chair, Proceedings of SEFI Annual Conference 2008, Research Symposium of PBL in Engineering Education. Danmark: UNESCO, 5 pp.
5.2.
2008
Teichmann, M., Kübarsepp, J., Ilvest, J.Jr. (2008). Students’ Self-management: E-course, E-tutoring and Online Support System. Abstracts of CISSE 2008: CISSE 2008, International Joint Conferences
on Computer, Information, and Systems Sciences, and Engineering. USA: University of Bridgeport, 10 pp.
1.1.
2007
Klaasen, H.; Kollo, L.; Kübarsepp, J. (2007). Mechanical properties and wear performance of compression sintered TiC-base cermets. Powder Metallurgy, 50 (2), 132−136.
1.1.
2007
Klaasen, H.; Kübarsepp, J. (2007). Performance of carbide composites for cyclic loading applications. International Journal of Materials & Product Technology, 28, 399−424. DOI: 10.1504/IJMPT.2007.013087.
1.1.
2007
Sergejev, F.; Preis, I.; Kübarsepp, J.; Antonov, M. (2007). Correlation between surface fatigue and microstructural defects of cemented carbides. Wear, 264 (9), 770−774. DOI: 10.1016/j.wear.2007.02.024.
3.1.
2007
Kübarsepp, J.; Klaasen, H.; Sergejev, F. (2007). Performance of cemented carbides in cyclic loading wear conditions. In: Progress in Powder Metallurgy (1221−1224). . Trans Tech Publications Ltd. (Materials Science Forum ; 534-536).
3.2.
2007
Klaasen, H.; Kübarsepp, J.; Preis, I.; Sergejev, F.; Traksmaa, R. (2007). Blanking performance and fatigue endurance of carbide composites. Proceedings of 10th International Conference and Exhibition of the European Ceramic Society: 10th International Conference and Exhibition of the European Ceramic Society, June 17 - 21, 2007, Berlin. Ed. Heinrich, J.G.; Aneziris, C.G. Berlin: Deutsche Keramische Gesellschaft e.V, 1241−1244.
3.2.
2007
Kübarsepp, J.; Klaasen, H.; Roosaar, T.; Viljus, M.; Traksmaa, R. (2007). Abrasive wear performance of carbide based composites. Proceedings of European Powder Metallurgy Congress EURO PM2007, 1: International Powder Metallurgy Congress & Exhibition EURO PM2007, Toulouse (France), 15-17 October 2007. European Powder Metallurgy Association, 221−226.
3.2.
2007
Klaasen, H.; Kollo, L; Kübarsepp, J.; Viljus, M. (2007). Pressurized sintering of TiC-base cermets. Proceedings of European Powder Metallurgy Congress EURO PM2007, 1: International Powder Metallurgy Congress & Exhibition EURO PM2007, Toulouse (France), 15-17 October 2007. European Powder Metallurgy Association, 215−220.
3.4.
2007
Kübarsepp, J. (2007). Opinions on teaching and learning in secondary school expressed from a university perspective. In: Holbrook, J.; Rannikmäe, M. (Ed.). Proceedings of IOSTE Eastern and Central European Symposeum "Europe needs more scientists-the role of Eastern and Central European Educators (142−150).. Tartu: Tartu University Press.
5.2.
2007
Teichmann, M.; Kübarsepp, J.; Ilvest, J. Jr. (2007). Students’ Self-management: E-course, E-tutoring and Online Support System. Abstracts of International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering; CISSE 2007: CISSE 2007; International Conference on Engineering Education, Instructional Technology, Assessment, and E-learning (EIAE 07). Ed. Fukuda, T.; Sobh, T.; Elleithy, K. USA: University of Bridgeport, 1−5.
6.3.
2007
Kübarsepp, J. (2007). Õpetamisest ja õppimisest üldhariduskoolis tehnikaülikooli pilgu läbi. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2006 (187−200).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2006
Klaasen, H.;Kübarsepp, J. (2006). Abrasive wear performance of carbide composites. Wear, 261, 520−526.
1.1.
2006
Klaasen, H.; Kubarsepp, J.; Eigi, R (2006). Peculiarities of hardmetals wear in blanking of sheet metals. Tribology International, 39 (4), 303−309.
1.2.
2006
Klaasen, H.; Kübarsepp, J.; Sergejev, F.; Traksmaa, R. (2006). Performance of cemeneted carbides in cyclic loading conditions. Materials Science, 12 (2), 144−146.
1.2.
2006
Laansoo, A.; Kübarsepp, J.; Saarna, M.; Klaasen, H. (2006). Internal Stresses in Diffusion Bonded Joints. Proceedings of the Lithuanian Academy of Sciences. Materials Science, 12 (2), 110−113.
1.3.
2006
Kübarsepp, J. (2006). Üldhariduskool kõrgkooli pilgu läbi. Haridus, 9−10.
3.1.
2006
Klaasen, H.; Kübarsepp, J.; Kollo, L. (2006). Performance of sinterhipped TiC-base cermets. Proceedings of EURO PM 2006 Congress & Exhibition, Ghent, Belgium, 23-26 Oct. 2006, 1 : EURO PM 2006 Congress & Exhibition, Ghent, Belgium, 23-26 Oct. 2006, EPMA. Shrewsbury, UK : European Powder Metallurgy Association, 213−216. (Hard Materials).
3.1.
2006
Sergejev, F.; Preis, I.; Kübarsepp, J.; Antonov, M. (2006). Correlation between surface fatigue and microstructural defects of cemented carbides. NORDTRIB 2006: NORDTRIB 2006, 12th Nordic Symposium in Tribology, HelsingØr, Denmark, June 7-9 2006. Technical University of Denmark, 68−68.
3.1.
2006
Sergejev, F.; Preis, I.; Kübarsepp, J.; Klaasen, H. (2006). Cemented carbides surface fatigue prediction using Murakami approach. Proc. of EURO-PM 2006 Congress & Exhibition, Ghent, Belgium, 23-26 Oct. 2006, Hard Materials 1: EURO-PM 2006 Congress & Exhibition, 23-26 Oct. 2006, Ghent (Belgium). Shrewsbury: European Powder Metallurgy Association, 61−66.
3.4.
2006
Kübarsepp, J.; Kaps, T. (2006). Innovative teaching methods at Tallinn University of Technology. Innovative Teaching and Learning in Engineering Education : Proceedings of the International Seminar: International Seminar on Innovative Teaching and Learning in Engineering Education, May 26-28, 2006, Valladolid (Spain). Ed. Dominguez, U. Valladolid: Escuela Universitaria Politécnica, Universidad de Valladolid, 129−143.
5.1.
2006
Kübarsepp, J.; Klaasen, H.; Sergejev, F. (2006). Performance of cemented carbides in cyclic loading wear conditions. Extended Abstracts of 2006 Powder Metallurgy World Congress, 2: 2006 Powder Metallurgy World Congress, Sept. 24-28, 2006, Busan (Korea). Korean Powder Metallurgy Institute, 887−888.
5.1.
2006
Sergejev, F.; Kübarsepp, J.; Preis, I. (2006). Application of the Murakami Approach for Prediction of Surface Fatigue of Cemented Carbides. Extended Abstracts of 2006 Powder Metallurgy World Congress, 1: Powder Metallurgy World Congress, Sept 24-28, 2006, Busan (Korea). Korean Powder Metallurgy Institute, 633−634.
5.2.
2006
Kübarsepp, J.; Klaasen, H.; Roosaar, T.; Annuka, H. (2006). Abrasive Wear and Mechanical Properties of Carbide Composites. 15th international Baltic conference "Engineering materials & tribology. Baltmattrib-2006" : October 5-6, 2006, Tallinn, Estonia : abstracts: 15th International Baltic Conference Engineering Materials Tribology. Baltmattrib- 2006 October 5- 6, 2006, Tallinn, Estonia. Tallinn: Tallinna Tehnikaülikool, 56−57.
6.3.
2006
Kübarsepp, J. (2006). Eesõna : 70 aastat mehaanikateaduskonda. 70 aastat mehaanikateaduskonda (5−7).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2006
Kübarsepp, J.,Lõhmus, A.;Hussainova, I.;Lõhmus, R. (2006). Mikro- ja nanotehnoloogiliste uurimismeetodite arendamine tööstuslike materjalide väljatöötamiseks. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2005 (269−284).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2006
Kübarsepp, J. (2006). Tallinna Tehnikaülikool avatud Euroopa kontekstis. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2005 (17−19).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2005
Klaasen, Heinrich; Kollo, Lauri; Kübarsepp, Jakob (2005). Performance of tic base cermets sintered by different techniques. Materials Science and Technology, 21 (9), 1049−1053.
3.4.
2005
Sergejev, F.; Preis, I.; Klaasen, H.; Kübarsepp, J. (2005). Murakami approach : fatigue strength prediction of cemented carbides by considering pores to be equivalent to small defects. EURO PM 2005 Proceedings of European Congress and Exhibition on Powder Metallurgy, 1: European Congress and Exhibition on Powder Metallurgy, 2-5 Oct. 2005, Prague (Czech Republic). Shrewsbury, UK: European Powder Metallurgy Association, 335−340.
3.4.
2005
Klaasen, H.; Kübarsepp, J.; Preis, I.; Sergejev, F. (2005). Fatigue performance of carbide composites. EURO PM 2005 Proceedings of European Congress and Exhibition on Powder Metallurgy, 1: European Congress and Exhibition on Powder Metallurgy, 2-5 Oct. 2005, Prague (Czech Republic). Shrewsbury, UK: European Powder Metallurgy Association, 323−328.
3.4.
2005
Klaasen, H.; Kollo, L.; Kübarsepp, J. (2005). Mechanical and wear behaviour of TiC-base cermets sintered by different techniques. EURO PM 2005 Proceedings of European Congress and Exhibition on Powder Metallurgy, 1: European Congress and Exhibition on Powder Metallurgy, 2-5 Oct. 2005, Prague (Czech Republic). Shrewsbury, UK: European Powder Metallurgy Association, 217−222.
5.2.
2005
Kommel, L.; Kübarsepp, J.; Hussainova, I.; Kimmari, E. (2005). Structure and properties of boron nitride based composite - produced by SHS method. Proc. of Fifth International Conference on Composite Science and Technology (ICCST/5): Fifth International Conference on Composite Science and Technology (ICCST/5), 1-3 February 2005 Sharjah, United Arab Emirates,School of Engineering, American University of Sharjah. Unaited Arab Emirates, 461−466.
5.2.
2005
Klaasen, H.; Kübarsepp, J.; Vainola, V. (2005). Abrasive wear of carbide composites and their mechanical properties. In: .14th International Baltic Conference "Materials Engineering 2005", Kaunas, 6-7 October.
5.2.
2005
Hussainova, I.; Kommel, L.; Kübarsepp, J.; Kimmari, E. (2005). Tribological properties of boron nitride based composites. Proceedings of the WTC2005 World Tribology Congress III - 2005: World Tribology Congress III - 2005, September 12-16, 2005, Washington, D.C. (USA). ASME Publications, 53−54.
6.3.
2005
Kübarsepp, J. (2005). Kõrghariduse riikliku reguleerimise võimalikkusest. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2004 (127−129).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2005
Kübarsepp, J. (2005). Konservatiivse kõrghariduspoliitika toetuseks. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2004 (21−24).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2005
Kübarsepp, J.; Lõhmus, A.; Hussainova, I.; Lõhmus, R. (2005). Teaduspreemia tehnikateaduste alal tööde tsükli "Mikro- ja nanotehnoloogiliste uurimismeetodite arendamine tööstuslike materjalide väljatöötamiseks" eest. Eesti Vabariigi teaduspreemiad (54−73).. Tallinn: Teaduste Akadeemia Kirjastus.
6.3.
2005
Lõhmus, A.; Kübarsepp, J. (2005). Mida millestki teha saaks : ka TTÜ materjalitehnika instituudi uurimistöödest. Horisont, 6, 10−15.
1.1.
2004
Klaasen, H.; Kubarsepp, J (2004). Wear of advanced cemented carbides for metalforming tool materials. Wear, 256, 846−853.
1.1.
2004
Klaasen, H.; Kubarsepp, J.; Preis, I. (2004). Wear behaviour, durability, and cyclic strength of TiC -base cermets. Materials Science and Technology, 20 (8), 1006−1010.
1.1.
2004
Klaasen, H.; Kubarsepp, J (2004). Wear behaviour and mechanical properties of sinterhipped hardmetals. Powder Metallurgy, 47 (2), 161−167.
1.2.
2004
Kübarsepp, J.; Klaasen, H.; Vainola, V. (2004). Performance of hard alloys in abrasive-erosive and sliding wear conditions. Proceedings of the Estonian Academy of Sciences. Engineering, 10 (4), 308−314.
3.1.
2004
"Annuka, Harri;Klaasen, Heinrich;Kübarsepp, Jakob;Suvi, Vahur" (2004). Adhesive wear behaviour of carbide composites and tool steels. Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME : 29-30 April 2004, Tallinn, Estonia. Tallinn: DAAAM National Estonia, Tallinn University of Technology, 175−176.
3.1.
2004
Kübarsepp, J.; Vainola, V.; Klaasen, H.; Loel, R. (2004). Behaviour of hard alloys in sliding and erosion wear conditions. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" (DAAAM) : 29-30th April 2004, Tallinn, Estonia: 4th International Conference "Industrial engineering - new challenges to SME", Tallinn, 29-30th April 2004. Tallinn: Tallinn University of Technology, 203−206.
3.1.
2004
Kommel, L.; Kübarsepp, J.; Veinthal, R.; Traksmaa, R. (2004). Fabrication, Control and Properties of Nanocrystalline Copper. In: Champion, Y.; Fecht, H-J. (Ed.). Nano-Archidectured and Nanostructured Materials : Fabrication, Control and Properties (27−37). . Weinheim: Wiley-V C H Verlag Gmbh.
3.1.
2004
Laansoo, A.; Kübarsepp, J.; Klaasen, H. (2004). Diffusion welding and brazing of tungsten free hardmetals. Proc. of International Conference on Brazing, High Temperature Brazing and Diffusion Welding, June 15-17, 2004, Aachen, Germany: International Conference on Brazing, High Temperature Brazing and Diffusion Welding, Aachen, 2004. ASM International, German Welding Society, 27−30.
3.1.
2004
Hussainova, Irina; Kübarsepp, Jakob (2004). Assessment of the wear resistance of multiphase materials. Proceedings of PM03 Int. Conference on Powder Metallurgy and Particulate Materials: Chicago, IL, USA, June 13 – 17. Ed. W.Brian James; R.A.Cherpenkoff. USA: Metal Powder Industry Publications, 16−27.
3.1.
2004
Klaasen, H.; Kübarsepp, J.; Annuka, H. (2004). Adhesive Wear Behaviour of Hard Alloys. In: Materials of the XIII International Baltic Conference Engineering Materials & Tribology, September 23- 24, Riga, Latvia (114−115). . Riga Technical University.
3.2.
2004
Laansoo, A.; Klaasen, H.; Kübarsepp, J.; Surenkov, G. (2004). Difusion bonding of hardmetals. Materials of the13th Baltic Intternational Conference on Engineering Materials and Tribology: BALTMATTRIB2004: Engineerings Materials & Tribology BALTMATTRIB2004, September 23-24, Riga, Latvia. Riga: Riga Technical University, 56−57.
3.2.
2004
Klaasen, H.; Kübarsepp, J.; Kollo, L. (2004). Sintering technology and properties of TiC-base cermets. Proceedings of the 13th International Baltic Conference "Engineering Materials and Tribology": 13th International Baltic Conference Engineering Materials and Tribology BALTMATTRIB2004, Riga, 2004,September 22-24. Riga, Latvia: Riga Technical University, 56−58.
3.2.
2004
Kübarsepp, J.; Klaasen, H.; Vainola, V. (2004). Sliding and erosion wear of cemented carbides. Proceedings of the 13th International Baltic Conference "Engineering Materials and Tribology": 13th International Baltic Conference Engineering Materials and Tribology BALTMATTRIB2004, Riga, 2004,September 22-24. Riga Technical University, 120−123.
3.4.
2004
Klaasen, H.; Kübarsepp, J.; Preis, I. (2004). Durability in application of TiC-base cermets. Proceedings of World Congress and Exhibition of Powder Metallurgy, PM 2004, 3: World Congress and Exhibition on Powder Metallurgy, PM2004. Shrewsbury, UK: European Powder Metallurgy Association, 617−622.
3.4.
2004
Klaasen, H.; Kübarsepp, J.; Kahar, A. (2004). Mechanical and wear behaviour of compression sintered hardmetals. Proceedings of World Congress and Exhibition of Powder Metallurgy, PM 2004, 3: World Congress and Exhibition on Powder Metallurgy, PM2004,Vienna,Austria,October 17-22. Shrewsbury, UK: European Powder Metallurgy Association, 557−562.
6.3.
2004
Kübarsepp, J. (2004). Kaugõpe võimaldab ühildada töötamise ja õppimise. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aasaraamat 2003 (148−151).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.2.
2003
Klaasen, H.; Kübarsepp, J.; Preis, I. (2003). Duability of advanced TiC-base cermets. Proceedings of the Estonian Academy of Sciences. Engineering, 9 (4), 272−280.
1.2.
2003
Klaasen, H.; Kübarsepp, J.; Preis, I. (2003). Durability of advanced TiC -base cermets. Proceedings of the Estonian Academy of Sciences. Engineering, 9 (4), 272−280.
3.1.
2003
Klaasen, H.; Kübarsepp, J.; Laansoo, A.; Preis, I. (2003). Dual compounds "cemented carbide+steel" produced by diffusion bonding. Proceedings of European Powder Metallurgy Conference - Challenges of a Changing Market, 1: European Powder Metallurgy Conference - Challenges of a Changing Market, October 20-22, 2003, Valencia (Spain). Shrewsbury, UK: European Powder Metallurgy Association, 155−159.
3.1.
2003
Kommel, L.; Kübarsepp, J.; Klaasen, H. (2003). Boron carbide based composites microstructure and properties relationships to processing features. Proceedings of European Powder Metallurgy Conference - Challenges of a Changing Market, 2: European Powder Metallurgy Conference - Challenges of a Changing Market, October 20-22, 2003, Valencia (Spain). Shrewsbury, UK: European Powder Metallurgy Association, 87−92.
5.2.
2003
Hussainova, I.; Kübarsepp, J.; Pirso, J. (2003). Assessment of the erosion resistance of carbides based cermets. 12th international Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : abstracts: "Engineering Materials & Tribology" BALTMATTRIB - 2003 12th International Baltic Conference, October 2-3, 2003, Tallinn (Estonia). Tallinn: TTU Press, 74.
5.2.
2003
Laansoo, A.; Kübarsepp, J.;; Surženkov, G. (2003). Induction brazing of tungsten free hardmetals to steel. 12th international Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : abstracts: "Engineering Materials & Tribology" BALTMATTRIB - 2003 12th International Baltic Conference, October 2-3, 2003, Tallinn (Estonia). Tallinn: TTU Press, 49.
6.2.
2003
Hendre, E.; Kulu, P.; Kübarsepp, J.; Metusala, T.; Tapupere, O. (2003). Materjalitehnika : õpperaamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2003
Kübarsepp, J. (2003). Haridussüsteem tehnikakesksemaks. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2002 (102−103).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.2.
2002
Laansoo, A.; Kübarsepp, J.; Surženkov, G. (2002). Brazing of cermets with steel using amorphous filler metals. Materials Science, 451−454.
1.2.
2002
Kübarsepp, J.; Klaasen, H.; Mikli, M.; Viljus, M. (2002). Erosive wear of TiC-base cermets. Materials Science, 8 (4), 486−488.
3.1.
2002
Klaasen, H.; Kübarsepp, J.; Preis, I. (2002). Toughness and durability of cemented carbides. Proceedings of the International Conference on Deformation and Fracture in Structural PM Materials: DF PM 2002, September 15-18, 2002, Stara Lesna, Slovak Republik, 1: International Conference on Deformation and Fracture in Structural PM Materials, Stara Lesna, 2002. Košice: IMR SAS, 77−83.
3.1.
2002
Klaasen, H.; Kübarsepp, J. (2002). Strength and wear resistance of sinterhipped hardmetals. Proceedings of European Conference on Hard Materials and Diamond Tooling: EURO PM 2002, October 7-9, 2002, Lausanne, Switzerland: European Conference on Hard Materials and Diamond Tooling, Lausanne, 2002. European Powder Metallurgy Association, 234−239.
3.1.
2002
Klaasen, H.; Kübarsepp, J.; Preis, I. (2002). Toughness characteristics of carbide composites. Proceedings of the 3rd International Conference "Industrial Engineering-New Challenges to SME": 3rd International Conference of the DAAAM "Industrial Engineering-New Challenges to SME", April 25-27 2002, Tallinn (Estonia). Tallinn: Tallinn University of Technology Press, 154−156.
3.1.
2002
"Laansoo, Andres;Kübarsepp, Jakob;Klaasen, Heinrich;Sur˛enkov, Gennadi" (2002). Joining hardmetals to steel using brazing processes. Proceedings of the 3rd International Conference Industrial Engineering-New Challenges to SME: 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia. Tallinn: DAAAM National Estonia, Tallinn TU, 177−180.
3.1.
2002
"Kübarsepp, Jakob;Klaasen, Heinrich;Laansoo, Andres" (2002). TiC-base cermet steel dual compounds produced by diffusion bonding. Proceedings of the 3rd International Conference Industrial Engineering-New Challenges to SME: 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia. Tallinn: DAAAM National Estonia, Tallinn TU, 173−176.
3.1.
2002
Klaasen, H.; Kübarsepp, J.; Preis, I. (2002). Toughness of carbide composites and their durability in application. Proceedings of European Conference on Hard Materials and Diamond Tooling : EURO PM 2002: European Conference on Hard Materials and Diamond Tooling, October 7-9, 2002, Lausanne (Switzerland). Shrewsbury, UK: European Powder Metallurgy Association, 240−245.
3.2.
2002
"Sur˛enkov, Gennadi;Laansoo, Andres;Kübarsepp, Jakob" (2002). Brazing and diffusion welding of tungsten free hardmetals. Abstracts of International Conference on Welding-Quality-Competitiveness: International Conference on Welding - Quality - Competitiveness,Moscow, Russia,October 22-24,2002. Moscow, 61−63.
3.4.
2002
Kübarsepp, J.; Udam, M. (2002). Higher education reforms on the state level:case of Estonia. Proceedings of SEFI Curriculum Development Working Group International Seminar: International seminar of SEFI curriculum development working group, Vilnius, Lithuania, May 17-19. Vilnius: Vilnius Gediminas Technical University, 50−55.
6.3.
2002
Kübarsepp, J. (2002). Kui palju peaks riik insenerikoolitusse investeerima? Tallinna Tehnikaülikooli aastaraamat (14−19).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2002
Kübarsepp, J. (2002). Inseneriõppest ja insenerikutsest. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2001 (136−137).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2001
Kubarsepp, J.; Klaasen, H.; Pirso, J (2001). Behaviour of tic-base cermets in different wear conditions. Wear, 249 (3-4), 229−234. DOI: 10.1016/S0043-1648(01)00569-5.
1.1.
2001
Hussainova, I.; Kübarsepp, J.; Pirso, J (2001). Mechanical properties and features of erosion of cermets. Wear, 250 (1-12), 818−825. DOI: 10.1016/S0043-1648(01)00737-2.
1.2.
2001
Klaasen, Heinrich; Kübarsepp, Jakob (2001). Properties of hardmetals influencing their adhesive wear in sheet metal blanking. Tribologia, 20 (1), 23−30.
3.1.
2001
Klaasen, H.; Kübarsepp, J. (2001). Reliability characteristics of sinterhipped hardmetals. Materials Engineering and BALTTRIB - 2001 : materials of the X-th International Baltic Conference, September 27 - 28, Jurmala, Latvia: 10th International Baltic Conference on Materials Engineering, Jurmala, September 27-28,2001. Riga Technical University, 55−57.
3.1.
2001
Laansoo, A.; Klaasen, H.; Kübarsepp, J.; Surženkov, G. (2001). Diffusion bonding hardmetals with steels. Materials engineering and BALTTRIB 2001 : materials of the X-th International Baltic Conference, September 27 - 28, Jurmala, Latvia: 10th International Baltic Conference on Materials Engineering, Jurmala, 2001. Riga Technical University, 58−61.
3.1.
2001
Kübarsepp, J.; Klaasen, H.; Laansoo, A. (2001). Compound carbide composites produced by diffusion bonding. Proceedings of European Congress and Exhibition on Powder Metallurgy PM 2001: European Congress and Exhibition on Powder Metallurgy PM2001, Nice,France,October 22-24, 2001. European Powder Metallurgy Association, 158−163.
3.1.
2001
Hussainova, I.; Kübarsepp, J. (2001). The effect of impact angle on the erosion of cermet. In: B. Bhushan (Ed.). Fundamentals of Tribology and Bridging the Gap Between the Macro- and Micro/Nanoscales (537−542). Kluwer Academic Publishers. (NATO Science Series; 10). DOI: 10.1007/978-94-010-0736-8_39.
3.1.
2001
Kübarsepp, J.; Teeri, N. (2001). New design and material combination for anti-skid studs of tyres. Proceedings of 2000 Powder Metallurgy World Congress : November 12-16, 2000, Kyoto, Japan, 2: Powder Metallurgy World Congress, November 12-16 2000, Kyoto (Japan). Japan Socety of Powder and Powder Metallurgy, 1637−1640.
3.1.
2001
Klaasen, H.; Kübarsepp, J. (2001). Durability characteristics of compression-sintered hardmetals. Proceedings of European Congress and Exhibition on Powder Metallurgy PM 2001: European Congress and Exhibition on Powder Metallurgy, October 22-24 2001, Nice (France). Shrewsbury, UK: European Powder Metallurgy Association, 153−157.
3.1.
2001
Kübarsepp, J.; Pirso, J.; Klaasen, H. (2001). Tribological characterization of TiC-base cermets. In: Proceedings of 2000 Powder Metallurgy World Congress : November 12-16, 2000, Kyoto, Japan (1633−1636). The Japan Society of Powder and Powder Metallurgy.
3.2.
2001
Hussainova, I.; Pirso, J.; Kübarsepp, J. (2001). The effect of impact variables and abrasive particle properties on the erosion of cermets. Proc. of 2nd World Tribology Congress, September 3-7, 2001, Vienna, Austria, (CD-ROM publication): 2nd World Tribology Congress,Vienna,Austria,September 3-7,2001. , 73−83.
3.3.
2001
Kübarsepp, J.; Külm, E.; Üksti, L.; Põdra, P. jt (2001). Eesti-inglise tehnikasõnaraamat. Tallinn: Euroülikool.
3.4.
2001
Pirso, J.; Viljus, M.; Kübarsepp, J.; Hussainova, I. (2001). Abrasive wear of Cr3C2 base cermets [Electronic resource]. In: Proceedings of 2nd World Tribology Congress (4 pp.).. Vienna, Austria: University of Vienna.
3.4.
2001
Kübarsepp, J.; Klaasen, H.; Pirso, J. (2001). Wear characteristics of TiC-base cermets. Materials of 10th International Baltic Conference "Materials Engineering & Balttrib 2001": 10th International Baltic Conference "Materials Engineering & Balttrib 2001", Jurmala, Latvia, September 27-28. Riga Technical University, 207−211.
6.2.
2001
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Pirso, J.; Valdma, L. (2001). Metalliõpetus ja metallide tehnoloogia. II, Metallide tehnoloogia. 1. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2001
Kübarsepp, J. (2001). Tehnikaerialade langus. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2000 (284−286).. Tallinna Tehnikaülikooli Kirjastus.
3.1.
2000
Pirso, J.; Viljus, M.; Kübarsepp, J. (2000). Abrasive erosion of chromium carbide based cermets. Proceedings of the 9th Nordic Symposium on Tribology, NORDTRIB 2000, 3: 9th Nordic Symposium on Tribology, NORDTRIB 2000, Porvoo, 11-14 June 2000. Ed. Anderson, P.; Ronkainen, H.; Holmberg, K. Espoo: Technical Research Centre of Finland, 959−967. (VTT SYMPOSIA).
3.1.
2000
Kübarsepp, J.; Klaasen, H.; Pirso, J.. (2000). TIC-base cermets as wear resistant materials. Proceedings of the 9th Nordic Symposium on Tribology, NORDTRIB 2000, 1: 9th Nordic Symposium on Tribology, NORDTRIB 2000, Porvoo, 11-14 June 2000. Ed. Anderson, P.; Ronkainen, H.; Holmberg, K. Espoo : Technical Research Centre of Finland, 206−215. (VTT Symposia; 200).
3.1.
2000
Preis, I.; Kübarsepp, J; Strišak, V. (2000). Preliminary assessment of durability of hardmetals and cermets. Proceedings of 2nd DAAAM International Conference: 2nd International Conference, 27-29th April 2000, Tallinn, (Estonia). Tallinn: Tallinn University of Technology Press, 175−178.
3.1.
2000
Kübarsepp, J.; Laansoo, A.; Klaasen, H. (2000). Diffusion bonding of steels with ceramic and metal composites. Proceedings of the 2nd International DAAAM Conference: 2nd International Conference, 27-29th April 2000, Tallinn, Estonia / DAAAM International Vienna, DAAAM National Estonia. Tallinn: Tallinn University of Technology Press, 171−174.
3.1.
2000
Kübarsepp, J.; Teeri, N. (2000). High-specific strength cermet for production of anti-skid studs. Proceedings of the 2nd International DAAAM Conference: 2nd International Conference, 27-29th April 2000, Tallinn, Estonia / DAAAM International Vienna, DAAAM National Estonia. Tallinn: Tallinn University of Technology Press, 167−170.
3.1.
2000
Baranovskaja, I.; Kübarsepp, J.; Idla, K.; Viljus, M. (2000). Characterisation of corrosion resistance of stainless TiC-base cermets. Proceedings of the 2nd International Conference "Industrial Engineering": 2nd International DAAAM Conference, 27-29th April 2000, Tallinn, Estonia / DAAAM International Vienna, DAAAM National Estonia. Tallinn: Tallinn University of Technology Press, 163−166.
3.1.
2000
Klaasen, H.; Kübarsepp, J. (2000). Properties of hardmetals influencing their adhesive wear. Proceedings of the 9th Nordic Symposium on Tribology, NORDTRIB 2000, 3: 9th Nordic Symposium on Tribology, NORDTRIB 2000, Porvoo, 11-14 June 2000. Ed. Anderson, P.; Ronkainen, H.; Holmberg, K. Espoo: Technical Research Centre of Finland, 877−885. (VTT SYMPOSIA ).
3.3.
2000
Kull, R; Kübarsepp, J.; Üksti, L.; Põdra, P. (2000). Inglise-eesti tehnikasõnaraamat. Tallinn: Euroülikool.
5.2.
2000
Kübarsepp, J.; Teeri, N. (2000). TiC-base new design anti-skid studs of tyres. Proceedings of Joint Nordic Conference in Powder Technology. Stockholm: KTH - the Royal Institute of Technology, 13.
5.2.
2000
Kübarsepp, J.; Klaasen, H. (2000). Evaluation of hardmetals and cermets durability in plastic forming of metals. Proceedings of Joint Nordic Conference in Powder Technology. Stockholm: KTH - the Royal Institute of Technology, 4.
5.2.
2000
Hussainova, I.; Kübarsepp, J. (2000). Mechanical properties and features of erosion of cermets. Book of abstracts of 4th EUROMECH Solid Mechanics Conference: 4th EUROMECH Solid Mechanics Conference, June 26-30, Metz (France). Metz, 509−509.
6.3.
2000
Kübarsepp, J. (2000). Koostöö tööstusega - mehaanikateaduskonna olulisemaid arengustrateegiaid 21.sajandi künnisel. Vahur Mägi (Toim.). Aastaraamat 1999 (13−23).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.6.
2000
Kübarsepp, J.; Nirk, T. (2000). Tasanaast - kas talverehvide tulevik? Tehnikamaailm, 11, 63−63.
1.2.
1999
Reshetnyak, H.; Kübarsepp, J. (1999). Wear resistance and toughness of hardmetals. Med˛iagotyra = Materials science, 2, 69−71.
1.2.
1999
Kübarsepp, J.; Baranovskaja, I.; Idla, K.; Kallast, V. (1999). Corrosion resistance of iron-alloys bonded cermets under acid conditions. Med˛iagotyra = Materials science, 2, 15−18.
3.1.
1999
Reshetnjak, H.; Kübarsepp, J. (1999). Properties of hardmetals influencing their durability. EURO PM'99 : European Conference on Advances in Hard Materials Production : Turin, Italy, November 8-10, 1999 : proceedings: EURO PM'99 : European Conference on Advances in Hard Materials Production : Turin, Italy, November 8-10, 1999. European Powder Metallurgy Association, 349−355.
3.1.
1999
Kübarsepp, J.; Reshetnyak, H. (1999). Wear resistance of hardmetals and cermets in conditions with prevailation of adhesion. Advances in Powder Metallurgy & Particulate Materials 1999: International conference "Powder Metallurgy & Particulate Materials 1999", Vancuover, Canada, June, 1999. Princeton, USA: Metal Powder Industry Publications, 179−188. (Part 10: Cemented Carbides).
3.4.
1999
Kübarsepp, J.; Reshetnjak, H.; Laansoo, A. (1999). Diffusion welding as an alternative for joining cermets (hardmetals) and steels. Proceedings of the 3rd International Conference MET-99 on Welding:Technologies, Equipment, Materials, Related Technologies: 3rd International Conference MET-99 on Welding: Technologies, Equipment, Materials, Related Technologies : June 3-4, 1999, Riga, Latvija. Riga Technical University, 126−129.
3.4.
1999
Pirso, J.; Kübarsepp, J. (1999). Abrasive wear resistance of TiC-NiMo cermets. Proceedings of International Conference BALTTRIB´99: International Conference Balttrib'99 : 21-22 September 1999, Kaunas, Lithuania. Kaunas: Lithuanian University of agriculture, 200−205.
3.4.
1999
Kübarsepp, J.; Reshetnyak, H.; Annuka, H. (1999). Wear resistance assessment of cermets and hardmetals. International Conference Balttrib'99 : 21-22 September 1999, Kaunas, Lithuania : proceedings. Kaunas: Lithuanian University of agriculture, 76−84.
3.4.
1999
Kübarsepp, Jakob; Kiili, J. (1999). Experience of continuing professional development of mechanical engineers in Estonia. Development of the Engineer in the Knowledge Society: The State of the Art.: 4th European Forum for Continuing Engineering Education. Trondheim, Norway, 9 - 11 June 1999. Trondheim: Norwegian University of Science and Technology (NTNU), 221−227.
3.4.
1999
Pirso, J.; Kübarsepp, J. (1999). Slurry Erosion-Corrosion of TiC-NiMo Cermets. Advances in Powder Metallurgy & Particulate Materials - 1999. Part 11, Cermets & Refractory Metals, 11: Conference on Powder Metallurgy & Particulate Materials PM2TEC 99,June 20-24, 1999, Vancouver (Canada). Princeton,: Metal Powder Industry Publications, 29−36.
3.4.
1999
Pirso, J.,Kübarsepp, J. (1999). Erosion of cermets based on titanium and chromium carbides. Proceedings of International Conference BALTTRIB1999: International Conference BALTTRIB99, Kaunas,Lithuania, September 21-22. Kaunas: Lithuanian University of agriculture, 206−212.
3.4.
1999
Hussainova, I.; Kübarsepp, J.; Shcheglov, I.; Tisler, S. (1999). Influence of particles properties on the collision of solid particles with hardmetal and cermet. International Conference Balttrib'99 : 21-22 September 1999, Kaunas, Lithuania : proceedings: Balttrib’99, Kaunas, Lithuania, September 21–22, 1999. Kaunas University of Technology Press, 281−287.
3.4.
1999
Pirso, J.; Kübarsepp, J. (1999). Abrasive Wear and Erosion of Titanium Carbide Based Cermets. EURO PM'99 : European Conference on Advances in Hard Materials Production : Turin, Italy, November 8-10, 1999 : proceedings: European Conference on Advances in Hard Materials Production EURO PM`99, Turin, Italy, November 8-9. European Powder Metallurgy Association, 423−428.
5.2.
1999
Kübarsepp, J.; Pirso, J.; Reshetnyak, H. (1999). Characteristics and Application of Tungsten-Free Cermets. Proc. of Joint Nordic Conf. in Powder Technology: Joint Nordic Conference on Powder Technology,May 5-6, 1999, Oslo Norway. Norwegian University of Science and Technology, 19.
5.2.
1999
Kübarsepp, J.; Baranovskaja, I.; Idla, K.; Kallast, V. (1999). Corrosion resistance of iron-alloys bonded cermets under acid conditions. Proceedings of the 8th International Baltic Conference : Materials Engineering-99 : September 23-24, Kaunas, Lithuania. Kaunas: Kaunas Technologija, 151.
5.2.
1999
Reshetnjak, H.; Kübarsepp, J. (1999). Toughness of hardmetals and their durability in metalforming operations. Proceedings of Joint Nordic Conference in Powder Technology: Joint Nordic Conference in Powder Technology : May 5-6, 1999, Oslo, Norway. Oslo: Norwegian University of Science and Technology, 37.
6.2.
1999
Arensburger, D.; Kulu, P.; Kübarsepp, J.; Pirso, J. (1999). Metalliõpetus ja metallide tehnoloogia. 3, Materjali ja tehnoloogia valik. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.7.
1999
Reshetnyak, H.;Kübarsepp, J. (1999). Reliability characteristics of hard metals. In: (40)..
1.1.
1998
Reshetnyak, H.; Kubarsepp, J. (1998). Resistance of hardmetals to fracture. Powder Metallurgy, 41 (3), 211−216.
3.2.
1998
Kübarsepp, J.; Annuka, H.; Reshetnjak, H. (1998). Significance of structural characteristics on wear resistance of hardmetals. Proceedings of the Third National DAAAM Conference in Estonia "Science '98": Tthe Third National DAAAM Conference in Estonia : SCIENCE '98, Tallinn, 1998. Tallinn: Tallinn University of Technology Press, 90−93.
3.4.
1998
Kübarsepp, J.; Reshetnjak, H. (1998). Characterization of hardmetals wear. Materials of the 7th International Baltic Conference Materials Engineering-98: Materials Engineering - 98 , September 24-25, 1998, Jurmala (Latvia). Riga: Riga Technical University, 123−127.
3.4.
1998
Kübarsepp, J.; Pirso, J.; Annuka, H. (1998). The features of wear and application of hardmetals. In: Mekaaniset kulumisilmiöt ja kulutusta kestävät materiaalit (14.1−14.5).. Tampere: Tampere University of Technology.
3.4.
1998
Kübarsepp, J.; Reshetnjak, H.; Pirso, J.; Annuka, H. (1998). Features of wear of TiC-base hardmetals. Proceedings of the World Congress and Exhibition on Powder Metallurgy: World Congress and Exhibition on Powder Metallurgy, October 18-22, Granada (Spain). London: European Powder Metallurgy Association, 75−79.
3.4.
1998
Reshetnyak, H., Kübarsepp, J. (1998). Reliability characteristics of hardmetals. Proceedings of the World Congress and Exhibition on Powder Metallurgy, 1998: World Congress and Exhibition on Powder Metallurgy, Granada, Spain, October 18-22, 1998. Shrewsbury, UK: European Powder Metallurgy Association, 15−20.
3.4.
1998
Reshetnyak, H.; Kübarsepp, J. (1998). Features of hardmetals wear resistance. NORDTRIB '98 : proceedings of the 8th International Conference on Tribology, Ebeltoft, Denmark, 7-10 June 1998, 1: 8th International Symposium on Tribology NORDTRIB 1998, Ebeltoft, Denmark, June 7-10 ,1998. Arhus: DTI Tribology Centre, 239−246.
6.2.
1998
Kulu, P.; Kübarsepp, J.; Valdma, L. (1998). Metalliõpetus ja metallide tehnoloogia. 1, Metalliõpetus ja metallurgia. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
1997
Reshetnyak, H.; Kubarsepp, J. (1997). Structure sensitivity of wear resistance of hardmetals. International Journal of Refractory Metals & Hard Materials, 15, 89−98.
3.2.
1997
Laansoo, A.; Kübarsepp, J. (1997). Application of magnetic methods for structure investigation of steel-bonded hardmetals. Proceedings of the 1st International Conference : 25-27th september 1997, Tallinn, Estonia: International DAAAM Conference, 25-27th September 1997, Tallinn, Estonia. Tallinn: Tallinn Technical University, 145−148.
3.2.
1997
Kübarsepp, J.; Reshetnjak, H. (1997). Structure sensitivity of hard metals and their durability in metal forming operations. Proceedings of the 1st International Conference : 25-27th september 1997, Tallinn, Estonia: International DAAAM Conference, 25-27th September 1997, Tallinn, Estonia. Tallinn: Tallinn Technical University, 133−136.
3.2.
1997
Baranovskaja, I.; Kübarsepp, J.; Kallast, V. (1997). Enhancement of corrosion resistance in stainless TiC-base hardmetals. Proceedings of the 1st International Conference : 25-27th september 1997, Tallinn, Estonia: International DAAAM Conference in Estonia, 25-27th september 1997, Tallinn, Estonia. Tallinn: Tallinn University of Technology Press, 6−12.
3.3.
1997
Kull, Rein; Nirk, Tavi; Raesaar, Peeter; Hödrejärv, Helvi; Mikkal, Valdek; Randlepp, Arne; Jõgi, Aksel; Uibopuu, Lembit; Lippmaa, Helle; Viikna, Anti; Kübarsepp, Jakob; Kulu, Priit; Märtson, Ivar; Üksti, Lembit; Vällo, Arnold; Kulbach, Valdek; Nõmm, Vaike; Kann, Jüri; Vaimel, Ants; Tiigimägi, Eeli ... Parmasto, Erast (1997). Teaduse ja tehnika seletav sõnaraamat = Dictionary of science and technology : inglise-eesti. Tallinn: TEA Kirjastus.
5.2.
1997
Kübarsepp, J.; Reshetnjak, H.; Annuka, H. (1997). Serviceability characteristics of steel-bonded hardmetals and their structure sensitivity. Abstracts of International Conference on Novel Processes and Materials in Powder Metallurgy: "International Conference ""Novel Processes and Materials in Powder Metallurgy"" : PM-97 : November 24-28, 1997, Kiev, Ukraine. Kiev: Ukrainian Academy of Sciences, 330.
5.2.
1997
Kübarsepp, J.; Pirso, J.; Annuka, H. (1997). Non-tungsten and non-cobalt cermets with designed serviceability characteristics. Abstracts of 7th international Exhibition and Symposium on powder Metallurgy: 7th International Exhibition and Symposium on Powder Metallurgy, March 18-21 Minsk, Belorussia. Minsk: Belorussian Academy of Sciences, 91.
5.2.
1997
Pirso, J.; Kübarsepp, J.; Liiskmann, G. (1997). Cermets with designed characteristics fo wear and wear-corrosion working conditions. Proceedings of Joint Nordic Conference on Powder Technology: Joint Nordic Conference in Powder Technology, November 26-27, Helsinki (Finland). Helsinki: Helsinki University of Technology, 38.
6.2.
1997
Kulu, P.; Kübarsepp, J. (1997). Metalliõpetus ja metallide tehnoloogia : eesti-inglise-saksa-vene terminid ja määratlused. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.2.
1996
Pirso, J.; Kübarsepp, J. (1996). Oxidation resistance of titanium and chromium carbide-base cermets. Proceedings of the Estonian Academy of Sciences. Engineering, 1, 4−13.
1.1.
1994
Reshetnjak, H.; Kübarsepp, J. (1994). Mechanical properties of hard metals and their erosive wear resistance. Wear, 177 (2), 185−193. DOI: 10.1016/0043-1648(94)90244-5.
1.1.
1994
Kübarsepp, J.; Kallast, V. (1994). Stainless hardmetals and their electrochemical corrosion resistance. Werkstoffe und Korrosion, 452−458.
1.1.
1994
Kubarsepp, J.; Reshetnyak, H.; Annuka, H. (1994). Characterization of the serviceability of steel-bonded hardmetals. International Journal of Refractory Metals & Hard Materials, 12 (6), 341−348.
1.2.
1993
Kübarsepp, J.; Annuka, H.; Valdma, L. (1993). Application Areas of Steel- bonded Cermets as Tool and Structural Material. Вестник машиностроения = Vestnik Mashinostroenija, 3, 31−35.
1.1.
1992
Levinskii, Y.V.; Kübarsepp, J.P.; Petrov, A.P. (1992). Titanium carbide-based carbide steels made of chips of titanium alloys. Soviet Powder Metallurgy and Metal Ceramics, 31 (10), 886−889.
2.2.
1991
Kübarsepp, J. (1991). Твердые сплавы со стальной связкой. Tallinn: Valgus.
1.1.
1990
Kübarsepp, J.P.; Annuka, H.I.; Reshetnyak, H.D.; Maistrenko, A.L.; Chepovetskii, G.I. (1990). Cracking resistance and strength of carbide steels. Soviet Powder Metallurgy and Metal Ceramics, 29 (1), 83−87. DOI: 10.1007/BF00796103.
1.1.
1990
Kübarsepp, J.P.; Reshetnyak, H.D. (1990). Indices of the serviceability of carbide steels. Soviet Powder Metallurgy and Metal Ceramics, 29 (2), 131−135. DOI: 10.1007/BF00794538.
1.1.
1989
Reshetnyak, H.D.; Kübarsepp, J.P.; Sepp, A.H.; Annuka, H.J. (1989). Some regularities of carbide steels wear in the conditions of abrasive-erosion. Trenie i Iznos, 10 (3), 525−529.
1.1.
1989
Kallast, V.; Kübarsepp, J.; Schächter, K.; Lohonyai, N. (1989). Corrosion and wear resistance of TiC-based chromium steel bonded PM hardmetals. Periodica Polytechnica Chemical Engineering, 33 (2), 141−148.
1.1.
1989
Kallast, V.A.; Kübarsepp, J.P. (1989). Corrosion resistance of TiC-Fe-Cr alloys and its effect on corrosion-abrasive wear. Protection of Metals, 25 (1), 88−91.
1.1.
1989
Kübarsepp, J.P.; Annuka, H.I. (1989). Bend and impact strength of steel-bonded carbides. Soviet Powder Metallurgy and Metal Ceramics, 28 (10), 805−809.
1.1.
1988
Kübarsepp, J.P. (1988). Oxidation of components of the TiC-Fe-Cr system in presintering a powder carbide steel. Soviet Powder Metallurgy and Metal Ceramics, 27 (3), 215−218. DOI: 10.1007/BF00802595.
1.1.
1987
Kallast, V.A.; Kübarsepp, J.P. (1987). Corrosion resistance of titanium carbide hard metals produced from powders. Protection of Metals, 23 (4), 466−469.
1.1.
1987
Valdma, L.E.; Annuka, H.J.; Kübarsepp, J.P. (1987). Wear resistance - strength complex of powder carbide steels. Trenie i Iznos, 8 (2), 368−373.
1.1.
1987
Kallast, V.; Kübarsepp, J.; Schächter, K.; Lohonyai, N. (1987). Corrosion resistance of corrosion-proof PM hardmetals TiC- steel. Periodica Polytechnica Chemical Engineering, 31 (4), 213−219.
1.1.
1987
Kübarsepp, J.P.; Valdma, L.E.; Annuka, H.I. (1987). Some problems of the production and application of titanium carbide alloys with steel bonds. Metal Science and Heat Treatment, 29 (3), 213−216. DOI: 10.1007/BF00772871.
1.1.
1987
Pirso, J.J.; Kübarsepp, J.P (1987). Effect of heat and chemicothermal treatment on the properties of powder hard alloys. Metal Science and Heat Treatment, 29 (3), 211−213. DOI: 10.1007/BF00772870.
1.1.
1986
Kübarsepp, J.P. (1986). Production of high chromium alloys TiC-Fe-Cr alloyed with silicon. Soviet Powder Metallurgy and Metal Ceramics, 25 (5), 410−414. DOI: 10.1007/BF00813957.
1.1.
1985
Kübarsepp, J.P.; Annuka, H.J.; Valdma, L.E. (1985). Study of TiC-steel hardmetals application in some conditions of abrasive-erosion and hydroabrasive wear. Trenie i Iznos, 6 (5), 851−858.
1.1.
1985
Kübarsepp, J.P.; Valdma, L.E.; Annuka, H.J. (1985). Some ways of increasing abrasion-erosion resistance of TiC- steel hardmetals. Trenie i Iznos, 6 (4), 698−703.
1.1.
1985
Kübarsepp, J.P. (1985). Effect of carbon concentration in binder on the mechanical properties of heat-treatable titanium carbide-steel alloys. Soviet Powder Metallurgy and Metal Ceramics, 24 (3), 214−216. DOI: 10.1007/BF00795831.
1.1.
1984
Kübarsepp, J.P.; Arensburger, D.S. (1984). Characteristics of the milling of titanium carbide-iron powder mixtures with steel balls. Soviet Powder Metallurgy and Metal Ceramics, 23 (7), 496−499. DOI: 10.1007/BF00792113.
1.2.
1984
Kübarsepp, J.P.; Dzykovich, I.Ya. (1984). Contact interaction of titanium carbide with some iron alloys. Adgeezia rasplavov i paika materialov, 13, 66−70.
1.1.
1983
Valdma, L.E.; Kübarsepp, J.P. (1983). Hydroabrasive wear resistance of sintered heat-treatable hardmetals. Trenie i Iznos, 4 (6), 1046−1050.
1.1.
1982
Lavrenko, V.A.; Procenko, T.G.; Kübarsepp, J.P.; Valdma, L.E. (1982). Oxidation of TiC-based hard alloys containing iron, chromium and silicon. Sverkhtverdye Materialy, 2, 47−50.
1.2.
1981
Panasyuk, A.D.; Kubarsepp, J.P.; Dzykovich, I.Ya.; Valdma, L.E. (1981). Contact reactions of titanium carbide with iron-base alloys. Soviet Powder Metallurgy and Metal Ceramics, 20 (4), 291−296.
1.1.
1980
Kübarsepp, J.P.; Arensburger, D.S.; Valdma, L.E. (1980). Wear resistance of sintered TiC-steel alloys in liquid corrosive and abrasive media. Soviet Powder Metallurgy and Metal Ceramics, 19 (9), 659−662. DOI: 10.1007/BF00790562.
1.2.
1980
Kübarsepp, J.; Valdma, L.; Kallast, V. (1980). Corrosion resistance of sintered TiC-steel alloys. Soviet Powder Metallurgy and Metal Ceramics, 19 (4), 293−294.
1.1.
1978
Arensburger, D.S.; Kübarsepp, J.P. (1978). Conditions of milling of TiC-Fe-Cr powder mixtures. Soviet Powder Metallurgy and Metal Ceramics, 17 (10), 740−743. DOI: 10.1007/BF00796356.

Tööstusomand

30.12.2020

Jakob Kübarsepp

https://etis.ee/CV/Jakob_Kübarsepp/eng
9.02.1947
5121901
6203354
jakob.kubarsepp@taltech.ee
http://
AAF-1281-2020

Career

Institutions and positions
01.09.2021–...   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Professor emeritus (1,00)
01.07.2017–...   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Professor (1,00)
01.01.2014–30.06.2017   
Tallinn University of Technology , Vice-Rector for academic affairs (1,00)
01.02.2011–31.12.2013   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Metals Processing, Professor (1,00)
2000–31.01.2011   
Tallinn University of Technology , Vice-Rector for Academic Affairs (TUT) (1,00)
1997–2000   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Metals Processing, Professor (1,00)
01.01.1992–31.12.1997   
Associate Professor (TUT, Department of Materials Engineering)
01.01.1986–31.12.1992   
Assistant Professor (TUT, Department of Materials Engineering)
01.01.1985–31.12.1986   
Teaching Assistant (TUT, Department of Materials Engineering)
01.01.1978–31.12.1985   
Senior Reseacher (TUT, Laboratory of Powder Metallurgy)
01.01.1975–31.12.1978   
Reseacher (TUT, Laboratory of Powder Metallurgy)
01.01.1970–31.12.1975   
Leading Designer (Estonian Academy of Science, Special Design Bureau)
 
 
Education
1965–1970   
Tallinn Technical University, Mechanical Engineering (cum laude)
 
 
R&D related managerial and administrative work
2019−...   
Estonian Research Council (ERC), member of the Board
2017−...   
The national scholarship programme "Kristjan Jaak", chairman of the Board
2017−...   
Member of the Board of the Department of Mechanical and Industrial Engineering
2016−...   
President of the Estonian monitoring committee of the International Society for Engineering Education IGIP
2015−...   
Estonian Academy of Science, the head of the Division of Informatics and Engineering
2015−...   
member of the international Advisory Board of journal "Powder Metallurgy Progress "
2014−...   
Editor of the journal "Proceedings of Estonian Academy of Sciences"
2012−...   
Science Centre Energy Foundation, member of the council
2011−...   
Member of the Estonian Academy of Sciences, the Division of Informatics and Engineering
2018−2019   
Estonian Research Council (ERC), member of the Evaluation Committee
2016−2017   
Member of the IT Academy Programme steering committee
2014−2016   
Member of the Board of the Department of Materials Science
2014−2014   
Chairman of organising committee of CESAER nerwork annual 2014 conference "Widening participation " and general assembly
2012−2013   
Estonian Higher Education Quality Agency, chaiman of Evaluation Council
2011−2017   
The national scholarship programme "Kristjan Jaak", member of the experts commission
2011−2012   
BALTECH coordinator of Nordic-Baltic networks NORDTEK-BALTECH joint conference and annual meetings
2010−2012   
The International Physics Olympiad in Estonia IPho2012, member of the steering committee
2008−2013   
"Estonian Journal of Engineering", editor
2005−2011   
Chairman of organising committes of BALTECH annual conferences ( 9 )
2005−2012   
Archimedes Foundation: the Council of European Higher Education Programmes (member of the council)
2005−2013   
Governing Board of the National program on publication of Estonian university textbooks, member
2004−2015   
Chairman of the BALTECH Consortium Board
2003−2006   
Chairman of the Foundation for Materials Technologies Transfer
2000−2011   
Vice-Rector for Academic Affairs
2000−2016   
Member of the Board of the Centre for Materials Research of TUT
1997−2000   
Member of expert commission of Estonian Science Foundation
1994−2000   
Dean of the Faculty of Mechanical Engineering
1994−2017   
Member of the Council of TUT
 
 
Creative work
-
 
 
Additional information
Täienduskoolitus/enesetäiendamine :
Välismaal:
- Moskva Teraste ja Sulamite Instituut ( 4 kuud, 1987 )
- Darmstadti Tehnikaülikool ja Kieli Tehnikakõrgkool ( 1 kuu, 1994 )
- Tampere Tehnikaülikool ( 1 kuu, 1996 )

Eestis :
- Juhtide arendusprogramm ( Aprill, 2002 )
- Ülikooli valmisolek välisüliõpilaste vastuvõtuks Suurbritannia Ülikoolide näitel ( jaanuar, 2004)
- Protokoll ja etikett ( november, 2006 )
- Kõrgemad riigikaitsekursused ( oktoober, 2008 )
- EFQM European Assessor training ( august, 2009 )
- Kõrgkooli sisemise kvaliteedikindlustamise protsess ( veebruar - mai, 2010 )
- Kvaliteedijuhtimine kõrgkoolis (september 2010 , Eesti Kvaliteediühing )
- Õppekavagruppide kordushindamise ekspertide koolitus ( jaanuar 2013 ja jaanuar 2014 , EKKA)
- juhtide arendusprogramm : " Projektijuhtimine ( veebruar 2017 ).

Kutsetunnistused :
- Volitatud mehaanikainsener V ( 1998, 2005, 2015 )
- Euroinsener ( 2001)
- insener-pedagoogi kvalifikatsioon ING-PAED IGIP ( 2001)

Liikmelisus :
- European Powder Metallurgy Association ( 2001... )
- Eesti Mehhanikainseneride Liit
Juhtide arendusprogramm: "Projektijuhtimine " ( veebruar 2017)

Qualifications

Academic degrees
Jakob Kübarsepp, Doctor's Degree, 1980, (sup) Leo Valdma, Terassideainega titaankarbiidkermiste tehnoloogia ja omadused (Technology and characteristics of titanium carbide based steel bonded cermets), Moscow Institute of Fine Chemical Technology.
 
 
Honours & awards
2019, Jakob Kübarsepp, Outstanding development work 2018 of Tallinn University of Technology ( II-nd price)
2011, Jakob Kübarsepp, Fellow, Estonian Academy of Sciences
2007, Jakob Kübarsepp, Distinguished Service Medal by Estonian Ministry of Education and Research
2006, Jakob Kübarsepp, National Distinguished Service Medal "Valgetähe IV klassi teenetemärk "
2005, Jakob Kübarsepp, Estonian National Science Prize" Developement of micro- and nanotechnological methode for elaboration of industrial materials
2005, Jakob Kübarsepp, Distinguished Service Medal "Mente et Manu " of Tallinn University of Technology
2001, Jakob Kübarsepp, European Engineer EUR ING ( FEANI)
2001, Jakob Kübarsepp, European Engineering Educator "ING-PAED IGIP"
1985, Jakob Kübarsepp, National Science Price
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; SPECIFICATION: Powder metallurgy and composite materials, particularly ceramic and metal composites.Wear and corrosion of powder materials.
 
 
Additional information
DSc.(Eng) Tallinn University of Technology, 1992; PhD., Moscow University of Fine Chemical Technology, 1979

Projects in progress

Completed projects

Dissertations under supervision

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2020
Laansoo, A.; Kübarsepp, J.; Surženkov, A.; Land, R.; Märtens, O.; Viljus, M. (2020). Induction brazing of cermets to steel and eddy current testing of joint quality. Welding in the World, 64 (3), 563−571. DOI: 10.1007/s40194-020-00854-x.
1.1.
2020
Kübarsepp, J.; Juhani, K. (2020). Cermets with Fe-alloy binder: A review. International Journal of Refractory Metals and Hard Materials, 92, #105290. DOI: 10.1016/j.ijrmhm.2020.105290.
1.1.
2020
Kolnes, M.; Kübarsepp, J.; Sergejev, F.; Kolnes, M.; Tarraste, M.; Viljus, M. (2020). Performance of Ceramic-Metal Composites as Potential Tool Materials for Friction Stir Welding of Aluminium, Copper and Stainless Steel. Materials, 13 (8), #1994. DOI: 10.3390/ma13081994.
1.1.
2020
Lille, H.; Ryabchikov, A.; Peetsalu, P.; Lind, L.; Sergejev, F.; Mikli, V.; Kübarsepp, J. (2020). Residual Stresses on Various PVD Hard Coatings on Tube and Plate Substrates. Coatings, 10 (11), 1054. DOI: 10.3390/coatings10111054.
3.1.
2020
Tarraste, M.; Kolnes, M.; Kübarsepp, J.; Juhani, K.; Viljus, M.; Külaviir, J. (2020). Green WC-FeMn cemented carbides for industrial wear parts. In: Euro PM2020 Congress Proceedings. European Powder Metallurgy Association (EPMA).
3.1.
2020
Tarraste, M.; Kübarsepp, J.; Juhani, K.; Kolnes, M.; Viljus, M.; Mere, A. (2020). Sintering of High Mn Cemented Carbides in Mn-Rich Environment. In: P. Horňak, M. Longauerová and M. Matvija (Ed.). Defect and Diffusion Forum (402−407). Trans Tech Publications. DOI: 10.4028/www.scientific.net/DDF.405.402.
3.2.
2020
Kübarsepp, J.; Kulu, P. (2020). Eesti teaduskeel inseneerias. P. Nemvalts (Toim.). Eesti teaduskeel keelterikkas maailmas (188−211). Tallinna Ülikooli Kirjastus.
1.1.
2019
Tarraste, M.; Kubarsepp, J.; Juhani, K.; Mere, A.; Viljus, M. (2019). Effect of Carbon Stabilizing Elements on WC Cemented Carbides with Chromium Steel Binder. Materials Science, 25 (2), 202−206. DOI: 10.5755/j01.ms.25.2.19619.
1.1.
2019
Kolnes, M.; Kübarsepp, J.; Sergejev, F.; Kolnes, M. (2019). Wear of potential tool materials for aluminium alloys friction stir welding at weld temperatures. Proceedings of the Estonian Academy of Sciences, 68 (2), 198−206. DOI: 10.3176/proc.2019.2.12.
3.1.
2019
Tarraste, M.; Kübarsepp, J.; Juhani, K.; Kolnes, M.; Viljus, M. (2019). High Energy Milling of WC-FeCr Cemented Carbides. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (136−141). 15.04.2019 Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.136.
3.1.
2019
Juhani, K.; Kübarsepp, J.; Tarraste, M.; Pirso, J.; Viljus, M. (2019). Microstructure Formation and Performance of Reactive Sintered titanium Oxycarbide Base Ceramic-Ceramic Composites. In: K. Karjust, J. Kübarsepp, T. Otto, I. Hussainova (Ed.). Modern Materials and Manufacturing 2019 (131−135). Trans Tech Publications. (Key Engineering Materials; 799). DOI: 10.4028/www.scientific.net/KEM.799.131.
3.1.
2019
Lille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Mikli, Valdek; Adoberg, Eron; Vägiström, Heinar; Kübarsepp, Jakob; Peetsalu, Priidu (2019). Average residual stresses in hard physical vapor deposited (PVD) coatings. In: Kubarsepp, Jakob; Hussainova, Irina; Otto, Tauno; Karjust, Kristo (Ed.). Key Engineering Materials (20−25). Conference Modern Materials and Manufacturing, MMM 2019; Tallinn; Estonia; 24 April 2019 through 26 April 2019. Trans Tech Publications Ltd. DOI: 10.4028/www.scientific.net/KEM.799.20.
3.1.
2019
Kolnes, M.; Kübarsepp, J.; Sergejev, F.; Kolnes, M.; Tarraste, M.; Mikli, V. (2019). WEAR BEHAVIOR OF CERAMIC METAL COMPOSITES AS TOOL MATERIALS FOR FSW OF STAINLESS STEEL. In: J. Padgurskas (Ed.). Proceedings of BALTTRIB’2019 (107−112). Vytautas Magnus University. DOI: 10.15544/balttrib.2019.06.
3.2.
2019
Kübarsepp, J. (2019). Teras kulumiskindlate komposiitide tehnoloogias. T. Soomere (Toim.). Teadusmõte Eestis (X).Tehnikateadused III (108−121). Tallinn: Eesti Teaduste Akadeemia kirjastus.
6.7.
2019
Kübarsepp, Jakob (koost.); Soomere, Tarmo (toim.) (2019). Teadusmõte Eestis (X). Tehnikateadused III. Tallinn: Eesti Teaduste Akadeemia.
1.1.
2018
Tarraste, Marek; Kübarsepp, Jakob; Juhani, Kristjan; Mere, Arvo; Kolnes, Märt; Viljus, Mart; Maaten, Birgit (2018). Ferritic chromium steel as binder metal for WC cemented carbides. International Journal of Refractory Metals & Hard Materials, 73, 183−191. DOI: 10.1016/j.ijrmhm.2018.02.010.
1.1.
2018
Kolnes, M.; Mere, A.; Kübarsepp, J.; Viljus, M.; Maaten, B.; Tarraste, M. (2018). Microstructure evolution of TiC cermets with ferritic AISI 430L steel binder. Powder Metallurgy. DOI: 10.1080/00325899.2018.1447268.
3.1.
2018
Kolnes, M.; Kübarsepp, J.; Sergejev,F.; Kolnes, M. (2018). Adhesive wear of WC- and TiC-based friction stir welding tool materials for aluminium alloy welding. In: Proceedings of EuroPM2018 Congress & Exhibition, October 14 - 18, 2018, Bilbao, Spain. European Powder Metallurgy Association (EPMA).
3.1.
2018
Lille, H.; Ryabchikov, A.; Kõo, J.; Adoberg, E.; Mikli, V.; Kübarsepp, J.; Peetsalu, P. (2018). Evaluation of residual stresses in PVD coatings by means of tubular substrate length variation. In: M. Seefeldt (Ed.). Materials Research Proceedings / MRP (131−136). Materials Research Forum LLC. (Residual Stresses 2018 – ECRS-10). DOI: 10.21741/9781945291890-21.
5.2.
2018
Kulu, P.; Kübarsepp, J.; Laaneots, R. (2018). Eesti tehnikateaduskeele ja terminite arendusest Tallinna Tehnikaülikoolis. VI eesti teaduskeele konverents: VI eesti teaduskeele konverents. 7. detsember 2018. Toim. K. Allkivi-Metsoja, P. Nemvalts, H. Põlda. Tallinn: Tallinna Ülikool, 19−20.
6.6.
2018
Kübarsepp, J. (2018). Teadus vajab muutusi juba doktorantuuri tasemel. Postimees (9).31.03.2018 Tallinn.
3.1.
2017
Kolnes, M.; Kübarsepp, J.; Viljus, M.; Traksmaa, R. (2017). Technological Peculiarities of Chromium Carbide-Based Iron Alloy Bonded Cermet. In: R. Bendikienė and K. Juzėnas (Ed.). Materials Engineering 2017 (82−86). 10.10.2017 Trans Tech Publications Ltd. (Solid State Phenomena ; 267). DOI: 10.4028/www.scientific.net/SSP.267.82.
3.1.
2017
Petrov, M.; Kübarsepp, J.; Sergejev, F.; Viljus, M.; Tarraste, M. (2017). Effect of sintering method on surface fatigue of carbide composites. In: Loca. D. (Ed.). Engineering Materials and Tribology XXV (368−372). Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.368.
3.1.
2017
Kolnes, M.; Kübarsepp, J.; Sregejev, F.; Kolnes, M. (2017). Comparative Study of Adhesive Wear for CoCr, TiC-NiMo, WC-Co as Potential FSW Tool Materials. In: R. Bendikienė, K. Juzėnas (Ed.). Materials Engineering 2017 (224−228). 10.10.2017 Trans Tech Publications Ltd. (Solid State Phenomena; 267). DOI: 10.4028/www.scientific.net/SSP.267.224.
6.6.
2017
Kübarsepp, J. (2017). Õppekavade reform kõrghariduse esimesel astmel. Õpetajate leht.13.01.2017 SA Kultuurileht.
1.1.
2016
Kolnes, M.; Pirso, J.; Kübarsepp, J.; Viljus, M.; Traksmaa, R. (2016). Structure formation and characteristics of chromium carbide-iron-titanium cermets. Proceedings of the Estonian Academy of Sciences, 65 (2), 138−143.
3.1.
2016
Ivanov, R.; Mikli, V.; Kübarsepp, J.; Hussainova, I. (2016). Direct CVD growth of foliated graphene closed shells on alumina nanofibers. In: Hussainova, I.; Veinthal, R. (Ed.). Engineering Materials and Tribology (77−80). Trans Tech Publications Ltd. (Key Engineering Materials ; 674).
3.1.
2016
Tarraste, M.; Kübarsepp, J.; Juhani, K.; Suurkivi, T.; Pirso, J. (2016). Spark plasma sintering of WC hardmetals with Fe-based binder. In: World PM2016 proceedings (USB). European Powder Metallurgy Association.
3.1.
2016
Kommel, L.; Kübarsepp, J.; Tarraste, M.; Kolnes, M. (2016). Boron containing solid and superhard composites production techniques and properties. In: World PM2016 proceedings. (1−6). Shrewsbury: European Powder Metallurgy Association.
3.1.
2016
Kolnes, M.; Kübarsepp, J.; Viljus, M.; Traksmaa, R.; Illopmägi, S. (2016). Effect of sintering conditions on microstructure and performance of TiC-FeCrMn cermets. In: World PM2016 proceedings (USB). European Powder Metallurgy Association.
3.2.
2016
Kübarsepp, J. (2016). Inseneriharidus ja - teadused kõrgharidus- ja teadusmaastikul. J. Järv, A. Pöitel (Toim.). Eesti Teaduste Akadeemia aastaraamat (84−89). Tallinn: Eesti Teaduste Akadeemia.
3.3.
2016
Kübarsepp, J.; Kulu, P.; Laansoo, A.; Karjust, K.; Saarna, M. (2016). Materjalitehnika seletav sõnaraamat:eesti-inglise-vene. Tallinna Tehnikaülikooli Kirjastus.
6.6.
2016
Rüütmann, T.; Kübarsepp, J. (2016). Inseneripedagoogika - mõjusam õpetus STEM-valdkonnas. Karl Kello (Toim.). Õpetajate Leht (13). Tallinn.
1.1.
2015
Kolnes, M.; Kübarsepp, J.; Kollo, L.; Viljus, M.. (2015). Characterization of TiC-FeCrMn cermets produced by powder metallurgy method. Materials Science, 21 (3), 353−357.10.5755/j01.ms.21.3.7364.
1.1.
2015
Aghayan, M.; Gasik, M.; Hussainova, I.; Rubio-Marcos, F.; Kollo, L.; Kubarsepp, J. (2015). Thermal and microstructural analysis of doped alumina nanofibers. Thermochimica Acta, 602, 43−48.10.1016/j.tca.2015.01.009.
2.4.
2015
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Veinthal, R. (2015). Materjalitehnika : õpik kõrgkoolidele. II, Konstruktsioonimaterjalide tehnologia. Tallinn: TTÜ kirjastus.
2.4.
2015
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Veinthal, R. (2015). Materjalitehnika : õpik kõrgkoolidele. I, Tehnomaterjalid. Tallinn: TTÜ kirjastus.
3.1.
2015
Tarraste, M.; Juhani, K.; Kübarsepp, J.; Pirso, J.; Mikli, V. (2015). The Effect of Cr and C on the Characteristics of WC-FeCr Hardmetals. Euro PM2015 Congress & Exibition : proceedings : 4–7 October 2015, Reims Congress Centre, Reims, France: Euro PM2015 Congress & Exhibition, Reims, Reims, 4–7 October 2015. European Powder Metallurgy Association, 1−6.
3.1.
2015
Kommel, L.; Tarraste, M.; Kolnes, M.; Veinthal, R.; Kübarsepp, J. (2015).
 . Euro PM2015 Proceedings: Euro PM2015 Congress & Exibition - Heads to Reims, Champagne, France. Ed. EPMA. Reims, France: European Powder Metallurgy Association, x−x.
3.1.
2015
Petrov, M.; Kübarsepp, J.; Sergejev, F.; Viljus, M. (2015). Effect of carbide phase and binder chemical composition on surface fatigue of carbide composites. In: Euro PM2015 Congress & Exhibition Proceedings (xx−xx). European Powder Metallurgy Association.
6.6.
2015
Kübarsepp, J. (2015). Maailima ja Eesti kõrghariduse trendid. Elektriala, 5, 8−10.
1.1.
2014
Kübarsepp, J.; Pirso, J.; Juhani, K. (2014). Developments in cermet design, technology and performance. International Journal of Materials & Product Technology, 49, 160−179.
1.1.
2014
Hussainova, I.; Antonov, M.; Voltsihhin, N.; Kübarsepp, J. (2014). Wear behaviour of Co-free hardmetals doped by zirconia and produced by conventional PM and SPS routines. Wear, 312, 83−90. DOI: 10.1016/j.wear.2014.01.014.
3.1.
2014
Voltsihhin, N.; Hussainova, I.; Kübarsepp, J.; Traksmaa, R. (2014). Processing and mechanical properties of ZrC-ZrO2 composites. In: Dagnija Loca (Ed.). Engineering Materials & Tribology XXII (258 −261).. Trans Tech Publications Ltd. (Key Engineering Materials; 604).
5.2.
2014
HUssainova, I.; Anoshkin, I.; Ivanov, R.; Kübarsepp, J. (2014). Novel alumina–nanocarbon hybrids. Book of abstracts of 38th International Conference & Exposition on Advanced Ceramics & Composites: 38th International Conference & Exposition on Advanced Ceramics & Composites, Daytona beach, FL, USA; 25.01 - 31.01.2014. USA: American Ceramic Society, 117.
6.6.
2014
Kübarsepp, J., Urbla, A. (2014). Vastuvõtust TTÜ-sse 2014. Inseneeria, 11, 40−42.
3.1.
2013
Kübarsepp, J.; Klaasen, H.; Tšinjan, A.; Juhani, K.; Kollo, L.; Viljus, M. (2013). Influence of pressurized sintering on performance of TiC-based cermets. Hussainova, I.. Engineering Materials and Tribology (56−61).. Trans Tech Publications Ltd. (Key Engineering Materials; 527).
3.2.
2013
Kübarsepp, J. (2013). Ülikoolid ja teadlased ühiskonda teenimas. Mõtus, L. (Toim.). Eesti Teaduste Akadeemia Aastaraamat (233−236).. Tallinn: Eesti Teaduste Akadeemia Kirjastus.
3.2.
2013
Kübarsepp, J.; Pirso, J.; Juhani, K. (2013). Influence of sintering technology on cermet performance. BALTTRIB´2013, Kaunas, Lithuania 14-15 nov 2013. Aleksandras Stulginskis University; Akademija, Kaunas, Lithuania, 56−61.
3.2.
2013
Hussainova, I.; Antonov, M.; Kübarsepp, J. (2013). Advanced cermets as tribomaterials. Proceedings of the 5th World Tribology Congress: 5th World Tribology Congress; WTC13, September 8 – 13, 2013; Torino, Italy. Italy: Italian Tribology Association.
3.3.
2013
Kübarsepp, J.; Kulu, P.; Laansoo, A.; Karjust, K.; Saarna, M. (2013). Materjalitehnika seletav sõnaraamat. Eesti - inglise - vene. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.6.
2013
Kübarsepp, J.; Kulu, P. (2013). Terminoloogiaarendus tehnikavaldkonnas. Sirp (2−3).. Sihtasutus Kultuurileht.
1.2.
2012
Laansoo, A.; Kübarsepp, J.; Vainola, V.; Viljus, M. (2012). Induction brazing of cermets to steel. Estonian Journal of Engineering, 18 (3), 232−242. DOI: 10.3176/eng.2012.3.08.
1.2.
2012
Tšinjan, A.; Klaasen, HeH.nrich; Kübarsepp, J.; Adoberg, E.; Sergejev, F.;Talkop, A. (2012). Wear performance of PVD coated steels. Estonian Journal of Engineering, 18 (3), 202−210. DOI: 10.3176/eng.2012.3.05.
3.1.
2012
Sergejev, F.; Petrov, M.; Kübarsepp, J. (2012). Determination of the mechanical properties of carbide composites by spherical indentation. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 2: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Ed. T. Otto. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 723−728.
1.1.
2011
Klaasen, H.; Kübarsepp, J.; Tšinjan, A.; Sergejev, F. (2011). Performance of carbide composites in cyclic loading wear conditions. Wear, 271, 837−841. DOI: 10.1016/j.wear.2011.03.005.
1.1.
2011
Antonov, M.; Hussainova, I.; Kübarsepp, J.; Traksmaa, R. (2011). Oxidation-abrasion of TiC-based cermets in SiC medium. Wear, 273 (1), 23−31. DOI: 10.1016/j.wear.2011.05.005.
1.1.
2011
Sergejev, F.; Klaasen, H.; Kübarsepp, J.; Preis, I.. (2011). Fatigue mechanics of carbide composites. International Journal of Materials and Product Technology, 40, 140−163. DOI: 10.1504/IJMPT.2011.037210.
1.2.
2011
Kübarsepp, J.; Klaasen, H.; Viljus, M.; Traksmaa, R.; Sergejev, F. (2011). Behaviour of carbide composites in different operation conditions. Powder metallurgy progress, 11, 258−264.
3.1.
2011
Kübarsepp, J.; Klaasen, H.; Tsinjan, A.; Roosaar, T.; Annuka, H. (2011). Wear performance of WC- and TiC- based ceramic-metallic composites. In: Proceedings of VI International Scientific Conference BALTTRIB 2011 (150−155).. Kaunas, Lithuania: Lithuanian University of agriculture.
3.1.
2011
Sergejev, F.; Klaasen, H.; Kubarsepp, J. (2011). Effect of Residual Stresses on the Surface Fatigue of TiC-based Carbide Composites. In: Mario Guagliano, Laura Vergani (Ed.). 11th International Conference on the Mechanical Behavior of Materials (ICM11) (3152−3161). . Elsevier. DOI: 10.1016/j.proeng.2011.04.522.
3.1.
2011
Tsinjan, A.; Klaasen, H.; Kübarsepp, J.; Adoberg, E.; Talkop, A.; Viljus, M. (2011). Performance of tool steels strengthened by PVD coatings in adhesion and cyclic loading wear conditions. In: Proceedings of EURO PM 2011 Congress & Exhibition, October 9-12, 2011, Barcelona, Spain (455−461). Shrewsbury, UK: European Powder Metallurgy Association.
3.2.
2011
Kübarsepp, J. (2011). Reformid Eesti kõrghariduses läbi kahe aastakümne = Reforms in Estonian Higher Education system during two decades. Leili Utno (Toim.). Kakskümmend aastat taasiseseisvust Eestis, 1991-2011 : ettekannete kokkuvõtted teaduskonverentsil "20 aastat taasiseseisvust Eestis, 1991-2011", 20.augustil 2011 Tallinnas = Twenty Years of Restored Statehood in Estonia, 1991-2011 : The Proceedings of Scientific Conference "20 Years of Restored Statehood in Estonia, 1991-2011" 20th August 2011 Tallinn (131−165).. Tallinn: Kirjastus "VÄLIS-EESTI".
3.2.
2011
Antonov, M.; Hussainova, I.; Kers, J.; Kulu, P.; Kübarsepp, J.; Veinthal, R. (2011). Advanced multifunctional materials and their applications. In: Research in Estonia. Present and Future. (146−167). . Estonian Academy of Sciences.
3.2.
2011
Kübarsepp, J. (2011). Suundumused doktoriõppes Euroopa teadus- ja kõrgharidusruumis. Eesti Teaduste Akadeemia Aastaraamat (234−236).. Tallinn: Eesti Teaduste Akadeemia Kirjastus.
3.3.
2011
Kübarsepp, J. (2011). eesti-inglise-vene terminisõnastik: Survetöötlus. 1−55.
3.3.
2011
Kübarsepp, J. (2011). Eesti-inglise-vene terminisõnastik:Valutehnoloogia. 1−60.
3.5.
2011
Kübarsepp, J.; Mägi, V. (2011). Eesti teaduskeele arendamine ja kasutamine tehnika, tehnoloogia ja majanduse valdkonnas. Peeter Päll (Toim.). Eestikeelne ülikool.3.detsembril 2009 peetud terminoloogiakonverentsi ettekanded (36−45).. Tartu: Tartu Ülikooli Kirjastus.
5.1.
2011
Sergejev, F.; Preis, I.; Kübarsepp, J. (2011). Fatigue strength prediction of carbide composites by considering pores to be equivalent to small defects: Effect of hot isostatic pressing. Book of abstracts: International Symposium on Fatigue Design and Material Defects, Trondheim, Norway. 23-25 May 2011. Ed. Gunnar Härkegård. NTNU, 41−42.
5.1.
2011
Sergejev, F.; Preis, I.; Kübarsepp, J. (2011). Correlation between surface fatigue and microstructural defects of cemented carbides: Experimental validation. Book of abstracts: International Symposium on Fatigue Design and Material Defects, Trondheim, Norway. 23-25 May 2011. Ed. Gunnar Härkegård. NTNU, 32−33.
1.1.
2010
Klaasen, H.; Kübarsepp, J.; Laansoo, A.; Viljus, M. (2010). Reliability of dual compounds "carbide composite + steel" produced by diffusion welding. International Journal of Refractory Metals and Hard Materials, 28 (5), 580−586.10.1016/j.ijrmhm.2010.03.005.
1.1.
2010
Klaasen, H.; Kübarsepp, J.; Roosaar, T.;Viljus, M.; Traksmaa, R. (2010). Adhesive wear performance of hardmetals and cermets. Wear, 268, 1122−1128.10.1016/j.wear.2010.01.006.
3.1.
2010
Laansoo, A.; Kübarsepp, J.; Vainola, V. (2010). Brazing of TiC cermet to steel. Proceedings of the International Conference of DAAAM Baltic "Industrial Engineering", 1: 7th International Conference of DAAAM Baltic "Industrioal Engineering", Tallinn, Estonia,22-24 April 2010. Ed. R.Küttner. Tallinn: Tallinn Technical University Press, 480−485.
3.1.
2010
Klaasen, H.; Kübarsepp, J.; Tšinjan, A.; Adoberg, E.; Vainola, V. (2010). Performance of tool steels strengthened by PVD coatings. Proceedings of International Powder Metallurgy Congress and Exhibition, Florence, Italy, 10-14 October 2010, 3: EURO PM2010, Florence, Italy, 10th-14th October 2010. European Powder Metallurgy Association, -.
5.2.
2010
Sergejev, F.; Klaasen, H.; Kübarsepp, J.; Traksmaa, R. (2010). Effect of microstructure and residual stresses on the wear resistance and durability of steel bonded TiC cermets. In: Abstracts of International Conference on Fatigue Damage of Structural Materials - ICFDSM VIII, 18-24 September 2010 (1). . Hyannis, MA, USA: Oxford Abstracts Ltd.
6.3.
2010
Kübarsepp, J.;Mägi, V. (2010). Eesti teaduskeele arendamine ja kasutamine tehnika, tehnoloogia ja majanduse valdkonnas. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2009 (251−256).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2009
Klaasen, H.; Kübarsepp, J.; Sergejev, F. (2009). Strength and failure of TiC based cermets. Powder Metallurgy, 52 (2), 111−115. DOI: 10.1179/174329008X315575.
1.2.
2009
Tšinjan, A.; Klaasen, H.; Kübarsepp, J.; Annuka, H. (2009). Influence of sintering techniques on the performance characteristics od steel-bonded TiC-based cermets. Estonian Journal of Engineering, 15 (4), 283−292.
3.2.
2009
Klaasen, H.; Roosaar, T.; Kübarsepp, J.; Tšinjan, A. (2009). Performance and Failure of Carbide Composites in Different Wear Conditions. EURO PM2009 Proceedings Vol 1, 1: EURO PM2009, Copenhagen, Denmark, 12th-14th October 2009. European Powder Metallurgy Association, 317−322.
3.3.
2009
Kübarsepp, J. (2009). Eesti-inglise- vene terminisõnastik:Metallurgia, pulbermetallurgia. 1−72.
6.3.
2009
Kübarsepp, J.; Mägi, V. (2009). Eesti keel õppe- ja teaduskeelena tehnikahariduses. Mägi, V.. Tallinna Tehnikaülikooli aastaraamat 2008 (355−360).. Tallinn: TTÜ kirjastus.
1.1.
2008
Roosaar, T.; Kübarsepp, J.; Klaasen, H.; Viljus, M. (2008). Wear Performance of TiC-base Cermets. Materials Science (Medžiagotyra), 14 (3), 238−241.
1.1.
2008
Sergejev, F.; Preis, I.; Hussainova, I.; Kübarsepp, J. (2008). Fatigue mechanics of TiC-based cemented carbides. Proceedings of the Institution of Mechanical Engineers, Part J, Journal of Engineering Tribology, 222: 34th Leeds-Lyon Symposium on Tribology; Lyon, September 4–7, 2007. London, UK: Professional Engineering Publishing, 201−209.
3.1.
2008
Sergejev, F.; Antonov, M.; Gregor, A.; Hussainova, I.; Kulu, P.; Kübarsepp, J. (2008). Investigation of the Surface Fatigue of Carbide Composites and PVD Hard Coatings. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (543−548). . Tallinn: Tallinn University of Technology.
3.1.
2008
Teichmann, M.; Kübarsepp, J.; Ilvest, J. Jr. (2008). Students' Self-management: E-Course, E-Tutoring and Online Support System. In: Iskander, M. (Ed.). Innovative Techniques in Instruction Technology, E-learning, E-assessment and Education (304−308).. USA: Springer.
3.1.
2008
Teichmann, M.; Kübarsepp, J. (2008). Students' Preparation for, and Coping with, Tertiary Level Science and Engineering Education. In: Holbrook, J., Rannikmäe, M., Reiska, P., Ilsley, P. (Ed.). The Need for a Paradigm Shift in Science Education for Post-Soviet Societies : Research and Practice (Estonian Example) (184−198).. Frankfurt am Main, Berlin, Bern, Bruxelles, New York, Oxford, Wien: Lang.
3.1.
2008
Roosaar, T.; J.Kübarsepp, J.; Klaasen, H.; Viljus, M. (2008). Adhesion wear performance of carbide-base composites. Proceedings of the 13th Nordic Symposium in Tribology, Nordtrib 2008, Tampere, Finland: 13th Nordic Symposium in Tribology, Nordtrib 2008, June 10-13, 2008, Tampere, Finland. Ed. Kleemola, J.; Lehtovaara, A. Tampere University of Technology, 10 pp.
3.2.
2008
Kollo, L.; Kübarsepp, J. (2008). Grain Size-Dependent Mechanical and Wear Properties of TiC-FeNi Steel Cermets. Advances in Powder Metallurgy & Particulate Materials—2008, Proceedings of the 2008 World Congress on Powder Metallurgy & Particulate Materials, 10: 2008 World Congress on Powder Metallurgy & Particulate Materials; June 8–12, Washington, D.C.. Princeton, New Jersey : Metal Powder Industry Publications, 90−95.
3.2.
2008
Klaasen, H.; Kübarsepp, J.; Roosaar, T.; Sergejev, F.; Talkop, A. (2008). Performance of carbide composites in cyclic loading conditions. Proceedings of Euro PM2008, 1: European Powder Metallurgy Conference & Exhibition Euro PM2008, Mannheim, Germany, 28.09-1.10.2008. European Powder Metallurgy Association, 237−242.
3.4.
2008
Teichmann, M.;Kübarsepp, J. (2008). Web-based freshmen support system at Tallinn University of Technology. Proceedings of Research Symposium on Problem Based Learning, CD-ROM: Research Symposium on Problem Based Learning (Pre-Conference to Annual SEFI Conference), Aalborg University, Denmark, June30-July1, 2008. Aalborg University,Denmark: Aalborg University Press, 10 pp.
5.2.
2008
Teichmann, M., Kübarsepp, J., Ilvest, J.Jr. (2008). Web-based Freshmen Support System at Tallinn University of Technology. Proceedings of SEFI Annual Conference 2008, Research Symposium of PBL in Engineering Education, CD-ROM: UNESCO Chair, Proceedings of SEFI Annual Conference 2008, Research Symposium of PBL in Engineering Education. Danmark: UNESCO, 5 pp.
5.2.
2008
Teichmann, M., Kübarsepp, J., Ilvest, J.Jr. (2008). Students’ Self-management: E-course, E-tutoring and Online Support System. Abstracts of CISSE 2008: CISSE 2008, International Joint Conferences
on Computer, Information, and Systems Sciences, and Engineering. USA: University of Bridgeport, 10 pp.
1.1.
2007
Klaasen, H.; Kollo, L.; Kübarsepp, J. (2007). Mechanical properties and wear performance of compression sintered TiC-base cermets. Powder Metallurgy, 50 (2), 132−136.
1.1.
2007
Klaasen, H.; Kübarsepp, J. (2007). Performance of carbide composites for cyclic loading applications. International Journal of Materials & Product Technology, 28, 399−424. DOI: 10.1504/IJMPT.2007.013087.
1.1.
2007
Sergejev, F.; Preis, I.; Kübarsepp, J.; Antonov, M. (2007). Correlation between surface fatigue and microstructural defects of cemented carbides. Wear, 264 (9), 770−774. DOI: 10.1016/j.wear.2007.02.024.
3.1.
2007
Kübarsepp, J.; Klaasen, H.; Sergejev, F. (2007). Performance of cemented carbides in cyclic loading wear conditions. In: Progress in Powder Metallurgy (1221−1224). . Trans Tech Publications Ltd. (Materials Science Forum ; 534-536).
3.2.
2007
Klaasen, H.; Kübarsepp, J.; Preis, I.; Sergejev, F.; Traksmaa, R. (2007). Blanking performance and fatigue endurance of carbide composites. Proceedings of 10th International Conference and Exhibition of the European Ceramic Society: 10th International Conference and Exhibition of the European Ceramic Society, June 17 - 21, 2007, Berlin. Ed. Heinrich, J.G.; Aneziris, C.G. Berlin: Deutsche Keramische Gesellschaft e.V, 1241−1244.
3.2.
2007
Kübarsepp, J.; Klaasen, H.; Roosaar, T.; Viljus, M.; Traksmaa, R. (2007). Abrasive wear performance of carbide based composites. Proceedings of European Powder Metallurgy Congress EURO PM2007, 1: International Powder Metallurgy Congress & Exhibition EURO PM2007, Toulouse (France), 15-17 October 2007. European Powder Metallurgy Association, 221−226.
3.2.
2007
Klaasen, H.; Kollo, L; Kübarsepp, J.; Viljus, M. (2007). Pressurized sintering of TiC-base cermets. Proceedings of European Powder Metallurgy Congress EURO PM2007, 1: International Powder Metallurgy Congress & Exhibition EURO PM2007, Toulouse (France), 15-17 October 2007. European Powder Metallurgy Association, 215−220.
3.4.
2007
Kübarsepp, J. (2007). Opinions on teaching and learning in secondary school expressed from a university perspective. In: Holbrook, J.; Rannikmäe, M. (Ed.). Proceedings of IOSTE Eastern and Central European Symposeum "Europe needs more scientists-the role of Eastern and Central European Educators (142−150).. Tartu: Tartu University Press.
5.2.
2007
Teichmann, M.; Kübarsepp, J.; Ilvest, J. Jr. (2007). Students’ Self-management: E-course, E-tutoring and Online Support System. Abstracts of International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering; CISSE 2007: CISSE 2007; International Conference on Engineering Education, Instructional Technology, Assessment, and E-learning (EIAE 07). Ed. Fukuda, T.; Sobh, T.; Elleithy, K. USA: University of Bridgeport, 1−5.
6.3.
2007
Kübarsepp, J. (2007). Õpetamisest ja õppimisest üldhariduskoolis tehnikaülikooli pilgu läbi. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2006 (187−200).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2006
Klaasen, H.;Kübarsepp, J. (2006). Abrasive wear performance of carbide composites. Wear, 261, 520−526.
1.1.
2006
Klaasen, H.; Kubarsepp, J.; Eigi, R (2006). Peculiarities of hardmetals wear in blanking of sheet metals. Tribology International, 39 (4), 303−309.
1.2.
2006
Klaasen, H.; Kübarsepp, J.; Sergejev, F.; Traksmaa, R. (2006). Performance of cemeneted carbides in cyclic loading conditions. Materials Science, 12 (2), 144−146.
1.2.
2006
Laansoo, A.; Kübarsepp, J.; Saarna, M.; Klaasen, H. (2006). Internal Stresses in Diffusion Bonded Joints. Proceedings of the Lithuanian Academy of Sciences. Materials Science, 12 (2), 110−113.
1.3.
2006
Kübarsepp, J. (2006). Üldhariduskool kõrgkooli pilgu läbi. Haridus, 9−10.
3.1.
2006
Klaasen, H.; Kübarsepp, J.; Kollo, L. (2006). Performance of sinterhipped TiC-base cermets. Proceedings of EURO PM 2006 Congress & Exhibition, Ghent, Belgium, 23-26 Oct. 2006, 1 : EURO PM 2006 Congress & Exhibition, Ghent, Belgium, 23-26 Oct. 2006, EPMA. Shrewsbury, UK : European Powder Metallurgy Association, 213−216. (Hard Materials).
3.1.
2006
Sergejev, F.; Preis, I.; Kübarsepp, J.; Antonov, M. (2006). Correlation between surface fatigue and microstructural defects of cemented carbides. NORDTRIB 2006: NORDTRIB 2006, 12th Nordic Symposium in Tribology, HelsingØr, Denmark, June 7-9 2006. Technical University of Denmark, 68−68.
3.1.
2006
Sergejev, F.; Preis, I.; Kübarsepp, J.; Klaasen, H. (2006). Cemented carbides surface fatigue prediction using Murakami approach. Proc. of EURO-PM 2006 Congress & Exhibition, Ghent, Belgium, 23-26 Oct. 2006, Hard Materials 1: EURO-PM 2006 Congress & Exhibition, 23-26 Oct. 2006, Ghent (Belgium). Shrewsbury: European Powder Metallurgy Association, 61−66.
3.4.
2006
Kübarsepp, J.; Kaps, T. (2006). Innovative teaching methods at Tallinn University of Technology. Innovative Teaching and Learning in Engineering Education : Proceedings of the International Seminar: International Seminar on Innovative Teaching and Learning in Engineering Education, May 26-28, 2006, Valladolid (Spain). Ed. Dominguez, U. Valladolid: Escuela Universitaria Politécnica, Universidad de Valladolid, 129−143.
5.1.
2006
Kübarsepp, J.; Klaasen, H.; Sergejev, F. (2006). Performance of cemented carbides in cyclic loading wear conditions. Extended Abstracts of 2006 Powder Metallurgy World Congress, 2: 2006 Powder Metallurgy World Congress, Sept. 24-28, 2006, Busan (Korea). Korean Powder Metallurgy Institute, 887−888.
5.1.
2006
Sergejev, F.; Kübarsepp, J.; Preis, I. (2006). Application of the Murakami Approach for Prediction of Surface Fatigue of Cemented Carbides. Extended Abstracts of 2006 Powder Metallurgy World Congress, 1: Powder Metallurgy World Congress, Sept 24-28, 2006, Busan (Korea). Korean Powder Metallurgy Institute, 633−634.
5.2.
2006
Kübarsepp, J.; Klaasen, H.; Roosaar, T.; Annuka, H. (2006). Abrasive Wear and Mechanical Properties of Carbide Composites. 15th international Baltic conference "Engineering materials & tribology. Baltmattrib-2006" : October 5-6, 2006, Tallinn, Estonia : abstracts: 15th International Baltic Conference Engineering Materials Tribology. Baltmattrib- 2006 October 5- 6, 2006, Tallinn, Estonia. Tallinn: Tallinna Tehnikaülikool, 56−57.
6.3.
2006
Kübarsepp, J. (2006). Eesõna : 70 aastat mehaanikateaduskonda. 70 aastat mehaanikateaduskonda (5−7).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2006
Kübarsepp, J.,Lõhmus, A.;Hussainova, I.;Lõhmus, R. (2006). Mikro- ja nanotehnoloogiliste uurimismeetodite arendamine tööstuslike materjalide väljatöötamiseks. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2005 (269−284).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2006
Kübarsepp, J. (2006). Tallinna Tehnikaülikool avatud Euroopa kontekstis. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2005 (17−19).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2005
Klaasen, Heinrich; Kollo, Lauri; Kübarsepp, Jakob (2005). Performance of tic base cermets sintered by different techniques. Materials Science and Technology, 21 (9), 1049−1053.
3.4.
2005
Sergejev, F.; Preis, I.; Klaasen, H.; Kübarsepp, J. (2005). Murakami approach : fatigue strength prediction of cemented carbides by considering pores to be equivalent to small defects. EURO PM 2005 Proceedings of European Congress and Exhibition on Powder Metallurgy, 1: European Congress and Exhibition on Powder Metallurgy, 2-5 Oct. 2005, Prague (Czech Republic). Shrewsbury, UK: European Powder Metallurgy Association, 335−340.
3.4.
2005
Klaasen, H.; Kübarsepp, J.; Preis, I.; Sergejev, F. (2005). Fatigue performance of carbide composites. EURO PM 2005 Proceedings of European Congress and Exhibition on Powder Metallurgy, 1: European Congress and Exhibition on Powder Metallurgy, 2-5 Oct. 2005, Prague (Czech Republic). Shrewsbury, UK: European Powder Metallurgy Association, 323−328.
3.4.
2005
Klaasen, H.; Kollo, L.; Kübarsepp, J. (2005). Mechanical and wear behaviour of TiC-base cermets sintered by different techniques. EURO PM 2005 Proceedings of European Congress and Exhibition on Powder Metallurgy, 1: European Congress and Exhibition on Powder Metallurgy, 2-5 Oct. 2005, Prague (Czech Republic). Shrewsbury, UK: European Powder Metallurgy Association, 217−222.
5.2.
2005
Kommel, L.; Kübarsepp, J.; Hussainova, I.; Kimmari, E. (2005). Structure and properties of boron nitride based composite - produced by SHS method. Proc. of Fifth International Conference on Composite Science and Technology (ICCST/5): Fifth International Conference on Composite Science and Technology (ICCST/5), 1-3 February 2005 Sharjah, United Arab Emirates,School of Engineering, American University of Sharjah. Unaited Arab Emirates, 461−466.
5.2.
2005
Klaasen, H.; Kübarsepp, J.; Vainola, V. (2005). Abrasive wear of carbide composites and their mechanical properties. In: .14th International Baltic Conference "Materials Engineering 2005", Kaunas, 6-7 October.
5.2.
2005
Hussainova, I.; Kommel, L.; Kübarsepp, J.; Kimmari, E. (2005). Tribological properties of boron nitride based composites. Proceedings of the WTC2005 World Tribology Congress III - 2005: World Tribology Congress III - 2005, September 12-16, 2005, Washington, D.C. (USA). ASME Publications, 53−54.
6.3.
2005
Kübarsepp, J. (2005). Kõrghariduse riikliku reguleerimise võimalikkusest. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2004 (127−129).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2005
Kübarsepp, J. (2005). Konservatiivse kõrghariduspoliitika toetuseks. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2004 (21−24).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2005
Kübarsepp, J.; Lõhmus, A.; Hussainova, I.; Lõhmus, R. (2005). Teaduspreemia tehnikateaduste alal tööde tsükli "Mikro- ja nanotehnoloogiliste uurimismeetodite arendamine tööstuslike materjalide väljatöötamiseks" eest. Eesti Vabariigi teaduspreemiad (54−73).. Tallinn: Teaduste Akadeemia Kirjastus.
6.3.
2005
Lõhmus, A.; Kübarsepp, J. (2005). Mida millestki teha saaks : ka TTÜ materjalitehnika instituudi uurimistöödest. Horisont, 6, 10−15.
1.1.
2004
Klaasen, H.; Kubarsepp, J (2004). Wear of advanced cemented carbides for metalforming tool materials. Wear, 256, 846−853.
1.1.
2004
Klaasen, H.; Kubarsepp, J.; Preis, I. (2004). Wear behaviour, durability, and cyclic strength of TiC -base cermets. Materials Science and Technology, 20 (8), 1006−1010.
1.1.
2004
Klaasen, H.; Kubarsepp, J (2004). Wear behaviour and mechanical properties of sinterhipped hardmetals. Powder Metallurgy, 47 (2), 161−167.
1.2.
2004
Kübarsepp, J.; Klaasen, H.; Vainola, V. (2004). Performance of hard alloys in abrasive-erosive and sliding wear conditions. Proceedings of the Estonian Academy of Sciences. Engineering, 10 (4), 308−314.
3.1.
2004
"Annuka, Harri;Klaasen, Heinrich;Kübarsepp, Jakob;Suvi, Vahur" (2004). Adhesive wear behaviour of carbide composites and tool steels. Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME : 29-30 April 2004, Tallinn, Estonia. Tallinn: DAAAM National Estonia, Tallinn University of Technology, 175−176.
3.1.
2004
Kübarsepp, J.; Vainola, V.; Klaasen, H.; Loel, R. (2004). Behaviour of hard alloys in sliding and erosion wear conditions. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" (DAAAM) : 29-30th April 2004, Tallinn, Estonia: 4th International Conference "Industrial engineering - new challenges to SME", Tallinn, 29-30th April 2004. Tallinn: Tallinn University of Technology, 203−206.
3.1.
2004
Kommel, L.; Kübarsepp, J.; Veinthal, R.; Traksmaa, R. (2004). Fabrication, Control and Properties of Nanocrystalline Copper. In: Champion, Y.; Fecht, H-J. (Ed.). Nano-Archidectured and Nanostructured Materials : Fabrication, Control and Properties (27−37). . Weinheim: Wiley-V C H Verlag Gmbh.
3.1.
2004
Laansoo, A.; Kübarsepp, J.; Klaasen, H. (2004). Diffusion welding and brazing of tungsten free hardmetals. Proc. of International Conference on Brazing, High Temperature Brazing and Diffusion Welding, June 15-17, 2004, Aachen, Germany: International Conference on Brazing, High Temperature Brazing and Diffusion Welding, Aachen, 2004. ASM International, German Welding Society, 27−30.
3.1.
2004
Hussainova, Irina; Kübarsepp, Jakob (2004). Assessment of the wear resistance of multiphase materials. Proceedings of PM03 Int. Conference on Powder Metallurgy and Particulate Materials: Chicago, IL, USA, June 13 – 17. Ed. W.Brian James; R.A.Cherpenkoff. USA: Metal Powder Industry Publications, 16−27.
3.1.
2004
Klaasen, H.; Kübarsepp, J.; Annuka, H. (2004). Adhesive Wear Behaviour of Hard Alloys. In: Materials of the XIII International Baltic Conference Engineering Materials & Tribology, September 23- 24, Riga, Latvia (114−115). . Riga Technical University.
3.2.
2004
Laansoo, A.; Klaasen, H.; Kübarsepp, J.; Surenkov, G. (2004). Difusion bonding of hardmetals. Materials of the13th Baltic Intternational Conference on Engineering Materials and Tribology: BALTMATTRIB2004: Engineerings Materials & Tribology BALTMATTRIB2004, September 23-24, Riga, Latvia. Riga: Riga Technical University, 56−57.
3.2.
2004
Klaasen, H.; Kübarsepp, J.; Kollo, L. (2004). Sintering technology and properties of TiC-base cermets. Proceedings of the 13th International Baltic Conference "Engineering Materials and Tribology": 13th International Baltic Conference Engineering Materials and Tribology BALTMATTRIB2004, Riga, 2004,September 22-24. Riga, Latvia: Riga Technical University, 56−58.
3.2.
2004
Kübarsepp, J.; Klaasen, H.; Vainola, V. (2004). Sliding and erosion wear of cemented carbides. Proceedings of the 13th International Baltic Conference "Engineering Materials and Tribology": 13th International Baltic Conference Engineering Materials and Tribology BALTMATTRIB2004, Riga, 2004,September 22-24. Riga Technical University, 120−123.
3.4.
2004
Klaasen, H.; Kübarsepp, J.; Preis, I. (2004). Durability in application of TiC-base cermets. Proceedings of World Congress and Exhibition of Powder Metallurgy, PM 2004, 3: World Congress and Exhibition on Powder Metallurgy, PM2004. Shrewsbury, UK: European Powder Metallurgy Association, 617−622.
3.4.
2004
Klaasen, H.; Kübarsepp, J.; Kahar, A. (2004). Mechanical and wear behaviour of compression sintered hardmetals. Proceedings of World Congress and Exhibition of Powder Metallurgy, PM 2004, 3: World Congress and Exhibition on Powder Metallurgy, PM2004,Vienna,Austria,October 17-22. Shrewsbury, UK: European Powder Metallurgy Association, 557−562.
6.3.
2004
Kübarsepp, J. (2004). Kaugõpe võimaldab ühildada töötamise ja õppimise. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aasaraamat 2003 (148−151).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.2.
2003
Klaasen, H.; Kübarsepp, J.; Preis, I. (2003). Duability of advanced TiC-base cermets. Proceedings of the Estonian Academy of Sciences. Engineering, 9 (4), 272−280.
1.2.
2003
Klaasen, H.; Kübarsepp, J.; Preis, I. (2003). Durability of advanced TiC -base cermets. Proceedings of the Estonian Academy of Sciences. Engineering, 9 (4), 272−280.
3.1.
2003
Klaasen, H.; Kübarsepp, J.; Laansoo, A.; Preis, I. (2003). Dual compounds "cemented carbide+steel" produced by diffusion bonding. Proceedings of European Powder Metallurgy Conference - Challenges of a Changing Market, 1: European Powder Metallurgy Conference - Challenges of a Changing Market, October 20-22, 2003, Valencia (Spain). Shrewsbury, UK: European Powder Metallurgy Association, 155−159.
3.1.
2003
Kommel, L.; Kübarsepp, J.; Klaasen, H. (2003). Boron carbide based composites microstructure and properties relationships to processing features. Proceedings of European Powder Metallurgy Conference - Challenges of a Changing Market, 2: European Powder Metallurgy Conference - Challenges of a Changing Market, October 20-22, 2003, Valencia (Spain). Shrewsbury, UK: European Powder Metallurgy Association, 87−92.
5.2.
2003
Hussainova, I.; Kübarsepp, J.; Pirso, J. (2003). Assessment of the erosion resistance of carbides based cermets. 12th international Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : abstracts: "Engineering Materials & Tribology" BALTMATTRIB - 2003 12th International Baltic Conference, October 2-3, 2003, Tallinn (Estonia). Tallinn: TTU Press, 74.
5.2.
2003
Laansoo, A.; Kübarsepp, J.;; Surženkov, G. (2003). Induction brazing of tungsten free hardmetals to steel. 12th international Baltic conference "Engineering materials & tribology. Baltmattrib-2003" : abstracts: "Engineering Materials & Tribology" BALTMATTRIB - 2003 12th International Baltic Conference, October 2-3, 2003, Tallinn (Estonia). Tallinn: TTU Press, 49.
6.2.
2003
Hendre, E.; Kulu, P.; Kübarsepp, J.; Metusala, T.; Tapupere, O. (2003). Materjalitehnika : õpperaamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2003
Kübarsepp, J. (2003). Haridussüsteem tehnikakesksemaks. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2002 (102−103).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.2.
2002
Laansoo, A.; Kübarsepp, J.; Surženkov, G. (2002). Brazing of cermets with steel using amorphous filler metals. Materials Science, 451−454.
1.2.
2002
Kübarsepp, J.; Klaasen, H.; Mikli, M.; Viljus, M. (2002). Erosive wear of TiC-base cermets. Materials Science, 8 (4), 486−488.
3.1.
2002
Klaasen, H.; Kübarsepp, J.; Preis, I. (2002). Toughness and durability of cemented carbides. Proceedings of the International Conference on Deformation and Fracture in Structural PM Materials: DF PM 2002, September 15-18, 2002, Stara Lesna, Slovak Republik, 1: International Conference on Deformation and Fracture in Structural PM Materials, Stara Lesna, 2002. Košice: IMR SAS, 77−83.
3.1.
2002
Klaasen, H.; Kübarsepp, J. (2002). Strength and wear resistance of sinterhipped hardmetals. Proceedings of European Conference on Hard Materials and Diamond Tooling: EURO PM 2002, October 7-9, 2002, Lausanne, Switzerland: European Conference on Hard Materials and Diamond Tooling, Lausanne, 2002. European Powder Metallurgy Association, 234−239.
3.1.
2002
Klaasen, H.; Kübarsepp, J.; Preis, I. (2002). Toughness characteristics of carbide composites. Proceedings of the 3rd International Conference "Industrial Engineering-New Challenges to SME": 3rd International Conference of the DAAAM "Industrial Engineering-New Challenges to SME", April 25-27 2002, Tallinn (Estonia). Tallinn: Tallinn University of Technology Press, 154−156.
3.1.
2002
"Laansoo, Andres;Kübarsepp, Jakob;Klaasen, Heinrich;Sur˛enkov, Gennadi" (2002). Joining hardmetals to steel using brazing processes. Proceedings of the 3rd International Conference Industrial Engineering-New Challenges to SME: 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia. Tallinn: DAAAM National Estonia, Tallinn TU, 177−180.
3.1.
2002
"Kübarsepp, Jakob;Klaasen, Heinrich;Laansoo, Andres" (2002). TiC-base cermet steel dual compounds produced by diffusion bonding. Proceedings of the 3rd International Conference Industrial Engineering-New Challenges to SME: 3rd International Conference Industrial Engineering - New Challenges to SME : 25-27 April 2002, Tallinn, Estonia. Tallinn: DAAAM National Estonia, Tallinn TU, 173−176.
3.1.
2002
Klaasen, H.; Kübarsepp, J.; Preis, I. (2002). Toughness of carbide composites and their durability in application. Proceedings of European Conference on Hard Materials and Diamond Tooling : EURO PM 2002: European Conference on Hard Materials and Diamond Tooling, October 7-9, 2002, Lausanne (Switzerland). Shrewsbury, UK: European Powder Metallurgy Association, 240−245.
3.2.
2002
"Sur˛enkov, Gennadi;Laansoo, Andres;Kübarsepp, Jakob" (2002). Brazing and diffusion welding of tungsten free hardmetals. Abstracts of International Conference on Welding-Quality-Competitiveness: International Conference on Welding - Quality - Competitiveness,Moscow, Russia,October 22-24,2002. Moscow, 61−63.
3.4.
2002
Kübarsepp, J.; Udam, M. (2002). Higher education reforms on the state level:case of Estonia. Proceedings of SEFI Curriculum Development Working Group International Seminar: International seminar of SEFI curriculum development working group, Vilnius, Lithuania, May 17-19. Vilnius: Vilnius Gediminas Technical University, 50−55.
6.3.
2002
Kübarsepp, J. (2002). Kui palju peaks riik insenerikoolitusse investeerima? Tallinna Tehnikaülikooli aastaraamat (14−19).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2002
Kübarsepp, J. (2002). Inseneriõppest ja insenerikutsest. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2001 (136−137).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2001
Kubarsepp, J.; Klaasen, H.; Pirso, J (2001). Behaviour of tic-base cermets in different wear conditions. Wear, 249 (3-4), 229−234. DOI: 10.1016/S0043-1648(01)00569-5.
1.1.
2001
Hussainova, I.; Kübarsepp, J.; Pirso, J (2001). Mechanical properties and features of erosion of cermets. Wear, 250 (1-12), 818−825. DOI: 10.1016/S0043-1648(01)00737-2.
1.2.
2001
Klaasen, Heinrich; Kübarsepp, Jakob (2001). Properties of hardmetals influencing their adhesive wear in sheet metal blanking. Tribologia, 20 (1), 23−30.
3.1.
2001
Klaasen, H.; Kübarsepp, J. (2001). Reliability characteristics of sinterhipped hardmetals. Materials Engineering and BALTTRIB - 2001 : materials of the X-th International Baltic Conference, September 27 - 28, Jurmala, Latvia: 10th International Baltic Conference on Materials Engineering, Jurmala, September 27-28,2001. Riga Technical University, 55−57.
3.1.
2001
Laansoo, A.; Klaasen, H.; Kübarsepp, J.; Surženkov, G. (2001). Diffusion bonding hardmetals with steels. Materials engineering and BALTTRIB 2001 : materials of the X-th International Baltic Conference, September 27 - 28, Jurmala, Latvia: 10th International Baltic Conference on Materials Engineering, Jurmala, 2001. Riga Technical University, 58−61.
3.1.
2001
Kübarsepp, J.; Klaasen, H.; Laansoo, A. (2001). Compound carbide composites produced by diffusion bonding. Proceedings of European Congress and Exhibition on Powder Metallurgy PM 2001: European Congress and Exhibition on Powder Metallurgy PM2001, Nice,France,October 22-24, 2001. European Powder Metallurgy Association, 158−163.
3.1.
2001
Hussainova, I.; Kübarsepp, J. (2001). The effect of impact angle on the erosion of cermet. In: B. Bhushan (Ed.). Fundamentals of Tribology and Bridging the Gap Between the Macro- and Micro/Nanoscales (537−542). Kluwer Academic Publishers. (NATO Science Series; 10). DOI: 10.1007/978-94-010-0736-8_39.
3.1.
2001
Kübarsepp, J.; Teeri, N. (2001). New design and material combination for anti-skid studs of tyres. Proceedings of 2000 Powder Metallurgy World Congress : November 12-16, 2000, Kyoto, Japan, 2: Powder Metallurgy World Congress, November 12-16 2000, Kyoto (Japan). Japan Socety of Powder and Powder Metallurgy, 1637−1640.
3.1.
2001
Klaasen, H.; Kübarsepp, J. (2001). Durability characteristics of compression-sintered hardmetals. Proceedings of European Congress and Exhibition on Powder Metallurgy PM 2001: European Congress and Exhibition on Powder Metallurgy, October 22-24 2001, Nice (France). Shrewsbury, UK: European Powder Metallurgy Association, 153−157.
3.1.
2001
Kübarsepp, J.; Pirso, J.; Klaasen, H. (2001). Tribological characterization of TiC-base cermets. In: Proceedings of 2000 Powder Metallurgy World Congress : November 12-16, 2000, Kyoto, Japan (1633−1636). The Japan Society of Powder and Powder Metallurgy.
3.2.
2001
Hussainova, I.; Pirso, J.; Kübarsepp, J. (2001). The effect of impact variables and abrasive particle properties on the erosion of cermets. Proc. of 2nd World Tribology Congress, September 3-7, 2001, Vienna, Austria, (CD-ROM publication): 2nd World Tribology Congress,Vienna,Austria,September 3-7,2001. , 73−83.
3.3.
2001
Kübarsepp, J.; Külm, E.; Üksti, L.; Põdra, P. jt (2001). Eesti-inglise tehnikasõnaraamat. Tallinn: Euroülikool.
3.4.
2001
Pirso, J.; Viljus, M.; Kübarsepp, J.; Hussainova, I. (2001). Abrasive wear of Cr3C2 base cermets [Electronic resource]. In: Proceedings of 2nd World Tribology Congress (4 pp.).. Vienna, Austria: University of Vienna.
3.4.
2001
Kübarsepp, J.; Klaasen, H.; Pirso, J. (2001). Wear characteristics of TiC-base cermets. Materials of 10th International Baltic Conference "Materials Engineering & Balttrib 2001": 10th International Baltic Conference "Materials Engineering & Balttrib 2001", Jurmala, Latvia, September 27-28. Riga Technical University, 207−211.
6.2.
2001
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Pirso, J.; Valdma, L. (2001). Metalliõpetus ja metallide tehnoloogia. II, Metallide tehnoloogia. 1. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.3.
2001
Kübarsepp, J. (2001). Tehnikaerialade langus. Mägi, V. (Toim.). Tallinna Tehnikaülikooli aastaraamat 2000 (284−286).. Tallinna Tehnikaülikooli Kirjastus.
3.1.
2000
Pirso, J.; Viljus, M.; Kübarsepp, J. (2000). Abrasive erosion of chromium carbide based cermets. Proceedings of the 9th Nordic Symposium on Tribology, NORDTRIB 2000, 3: 9th Nordic Symposium on Tribology, NORDTRIB 2000, Porvoo, 11-14 June 2000. Ed. Anderson, P.; Ronkainen, H.; Holmberg, K. Espoo: Technical Research Centre of Finland, 959−967. (VTT SYMPOSIA).
3.1.
2000
Kübarsepp, J.; Klaasen, H.; Pirso, J.. (2000). TIC-base cermets as wear resistant materials. Proceedings of the 9th Nordic Symposium on Tribology, NORDTRIB 2000, 1: 9th Nordic Symposium on Tribology, NORDTRIB 2000, Porvoo, 11-14 June 2000. Ed. Anderson, P.; Ronkainen, H.; Holmberg, K. Espoo : Technical Research Centre of Finland, 206−215. (VTT Symposia; 200).
3.1.
2000
Preis, I.; Kübarsepp, J; Strišak, V. (2000). Preliminary assessment of durability of hardmetals and cermets. Proceedings of 2nd DAAAM International Conference: 2nd International Conference, 27-29th April 2000, Tallinn, (Estonia). Tallinn: Tallinn University of Technology Press, 175−178.
3.1.
2000
Kübarsepp, J.; Laansoo, A.; Klaasen, H. (2000). Diffusion bonding of steels with ceramic and metal composites. Proceedings of the 2nd International DAAAM Conference: 2nd International Conference, 27-29th April 2000, Tallinn, Estonia / DAAAM International Vienna, DAAAM National Estonia. Tallinn: Tallinn University of Technology Press, 171−174.
3.1.
2000
Kübarsepp, J.; Teeri, N. (2000). High-specific strength cermet for production of anti-skid studs. Proceedings of the 2nd International DAAAM Conference: 2nd International Conference, 27-29th April 2000, Tallinn, Estonia / DAAAM International Vienna, DAAAM National Estonia. Tallinn: Tallinn University of Technology Press, 167−170.
3.1.
2000
Baranovskaja, I.; Kübarsepp, J.; Idla, K.; Viljus, M. (2000). Characterisation of corrosion resistance of stainless TiC-base cermets. Proceedings of the 2nd International Conference "Industrial Engineering": 2nd International DAAAM Conference, 27-29th April 2000, Tallinn, Estonia / DAAAM International Vienna, DAAAM National Estonia. Tallinn: Tallinn University of Technology Press, 163−166.
3.1.
2000
Klaasen, H.; Kübarsepp, J. (2000). Properties of hardmetals influencing their adhesive wear. Proceedings of the 9th Nordic Symposium on Tribology, NORDTRIB 2000, 3: 9th Nordic Symposium on Tribology, NORDTRIB 2000, Porvoo, 11-14 June 2000. Ed. Anderson, P.; Ronkainen, H.; Holmberg, K. Espoo: Technical Research Centre of Finland, 877−885. (VTT SYMPOSIA ).
3.3.
2000
Kull, R; Kübarsepp, J.; Üksti, L.; Põdra, P. (2000). Inglise-eesti tehnikasõnaraamat. Tallinn: Euroülikool.
5.2.
2000
Kübarsepp, J.; Teeri, N. (2000). TiC-base new design anti-skid studs of tyres. Proceedings of Joint Nordic Conference in Powder Technology. Stockholm: KTH - the Royal Institute of Technology, 13.
5.2.
2000
Kübarsepp, J.; Klaasen, H. (2000). Evaluation of hardmetals and cermets durability in plastic forming of metals. Proceedings of Joint Nordic Conference in Powder Technology. Stockholm: KTH - the Royal Institute of Technology, 4.
5.2.
2000
Hussainova, I.; Kübarsepp, J. (2000). Mechanical properties and features of erosion of cermets. Book of abstracts of 4th EUROMECH Solid Mechanics Conference: 4th EUROMECH Solid Mechanics Conference, June 26-30, Metz (France). Metz, 509−509.
6.3.
2000
Kübarsepp, J. (2000). Koostöö tööstusega - mehaanikateaduskonna olulisemaid arengustrateegiaid 21.sajandi künnisel. Vahur Mägi (Toim.). Aastaraamat 1999 (13−23).. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.6.
2000
Kübarsepp, J.; Nirk, T. (2000). Tasanaast - kas talverehvide tulevik? Tehnikamaailm, 11, 63−63.
1.2.
1999
Reshetnyak, H.; Kübarsepp, J. (1999). Wear resistance and toughness of hardmetals. Med˛iagotyra = Materials science, 2, 69−71.
1.2.
1999
Kübarsepp, J.; Baranovskaja, I.; Idla, K.; Kallast, V. (1999). Corrosion resistance of iron-alloys bonded cermets under acid conditions. Med˛iagotyra = Materials science, 2, 15−18.
3.1.
1999
Reshetnjak, H.; Kübarsepp, J. (1999). Properties of hardmetals influencing their durability. EURO PM'99 : European Conference on Advances in Hard Materials Production : Turin, Italy, November 8-10, 1999 : proceedings: EURO PM'99 : European Conference on Advances in Hard Materials Production : Turin, Italy, November 8-10, 1999. European Powder Metallurgy Association, 349−355.
3.1.
1999
Kübarsepp, J.; Reshetnyak, H. (1999). Wear resistance of hardmetals and cermets in conditions with prevailation of adhesion. Advances in Powder Metallurgy & Particulate Materials 1999: International conference "Powder Metallurgy & Particulate Materials 1999", Vancuover, Canada, June, 1999. Princeton, USA: Metal Powder Industry Publications, 179−188. (Part 10: Cemented Carbides).
3.4.
1999
Kübarsepp, J.; Reshetnjak, H.; Laansoo, A. (1999). Diffusion welding as an alternative for joining cermets (hardmetals) and steels. Proceedings of the 3rd International Conference MET-99 on Welding:Technologies, Equipment, Materials, Related Technologies: 3rd International Conference MET-99 on Welding: Technologies, Equipment, Materials, Related Technologies : June 3-4, 1999, Riga, Latvija. Riga Technical University, 126−129.
3.4.
1999
Pirso, J.; Kübarsepp, J. (1999). Abrasive wear resistance of TiC-NiMo cermets. Proceedings of International Conference BALTTRIB´99: International Conference Balttrib'99 : 21-22 September 1999, Kaunas, Lithuania. Kaunas: Lithuanian University of agriculture, 200−205.
3.4.
1999
Kübarsepp, J.; Reshetnyak, H.; Annuka, H. (1999). Wear resistance assessment of cermets and hardmetals. International Conference Balttrib'99 : 21-22 September 1999, Kaunas, Lithuania : proceedings. Kaunas: Lithuanian University of agriculture, 76−84.
3.4.
1999
Kübarsepp, Jakob; Kiili, J. (1999). Experience of continuing professional development of mechanical engineers in Estonia. Development of the Engineer in the Knowledge Society: The State of the Art.: 4th European Forum for Continuing Engineering Education. Trondheim, Norway, 9 - 11 June 1999. Trondheim: Norwegian University of Science and Technology (NTNU), 221−227.
3.4.
1999
Pirso, J.; Kübarsepp, J. (1999). Slurry Erosion-Corrosion of TiC-NiMo Cermets. Advances in Powder Metallurgy & Particulate Materials - 1999. Part 11, Cermets & Refractory Metals, 11: Conference on Powder Metallurgy & Particulate Materials PM2TEC 99,June 20-24, 1999, Vancouver (Canada). Princeton,: Metal Powder Industry Publications, 29−36.
3.4.
1999
Pirso, J.,Kübarsepp, J. (1999). Erosion of cermets based on titanium and chromium carbides. Proceedings of International Conference BALTTRIB1999: International Conference BALTTRIB99, Kaunas,Lithuania, September 21-22. Kaunas: Lithuanian University of agriculture, 206−212.
3.4.
1999
Hussainova, I.; Kübarsepp, J.; Shcheglov, I.; Tisler, S. (1999). Influence of particles properties on the collision of solid particles with hardmetal and cermet. International Conference Balttrib'99 : 21-22 September 1999, Kaunas, Lithuania : proceedings: Balttrib’99, Kaunas, Lithuania, September 21–22, 1999. Kaunas University of Technology Press, 281−287.
3.4.
1999
Pirso, J.; Kübarsepp, J. (1999). Abrasive Wear and Erosion of Titanium Carbide Based Cermets. EURO PM'99 : European Conference on Advances in Hard Materials Production : Turin, Italy, November 8-10, 1999 : proceedings: European Conference on Advances in Hard Materials Production EURO PM`99, Turin, Italy, November 8-9. European Powder Metallurgy Association, 423−428.
5.2.
1999
Kübarsepp, J.; Pirso, J.; Reshetnyak, H. (1999). Characteristics and Application of Tungsten-Free Cermets. Proc. of Joint Nordic Conf. in Powder Technology: Joint Nordic Conference on Powder Technology,May 5-6, 1999, Oslo Norway. Norwegian University of Science and Technology, 19.
5.2.
1999
Kübarsepp, J.; Baranovskaja, I.; Idla, K.; Kallast, V. (1999). Corrosion resistance of iron-alloys bonded cermets under acid conditions. Proceedings of the 8th International Baltic Conference : Materials Engineering-99 : September 23-24, Kaunas, Lithuania. Kaunas: Kaunas Technologija, 151.
5.2.
1999
Reshetnjak, H.; Kübarsepp, J. (1999). Toughness of hardmetals and their durability in metalforming operations. Proceedings of Joint Nordic Conference in Powder Technology: Joint Nordic Conference in Powder Technology : May 5-6, 1999, Oslo, Norway. Oslo: Norwegian University of Science and Technology, 37.
6.2.
1999
Arensburger, D.; Kulu, P.; Kübarsepp, J.; Pirso, J. (1999). Metalliõpetus ja metallide tehnoloogia. 3, Materjali ja tehnoloogia valik. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.7.
1999
Reshetnyak, H.;Kübarsepp, J. (1999). Reliability characteristics of hard metals. In: (40)..
1.1.
1998
Reshetnyak, H.; Kubarsepp, J. (1998). Resistance of hardmetals to fracture. Powder Metallurgy, 41 (3), 211−216.
3.2.
1998
Kübarsepp, J.; Annuka, H.; Reshetnjak, H. (1998). Significance of structural characteristics on wear resistance of hardmetals. Proceedings of the Third National DAAAM Conference in Estonia "Science '98": Tthe Third National DAAAM Conference in Estonia : SCIENCE '98, Tallinn, 1998. Tallinn: Tallinn University of Technology Press, 90−93.
3.4.
1998
Kübarsepp, J.; Reshetnjak, H. (1998). Characterization of hardmetals wear. Materials of the 7th International Baltic Conference Materials Engineering-98: Materials Engineering - 98 , September 24-25, 1998, Jurmala (Latvia). Riga: Riga Technical University, 123−127.
3.4.
1998
Kübarsepp, J.; Pirso, J.; Annuka, H. (1998). The features of wear and application of hardmetals. In: Mekaaniset kulumisilmiöt ja kulutusta kestävät materiaalit (14.1−14.5).. Tampere: Tampere University of Technology.
3.4.
1998
Kübarsepp, J.; Reshetnjak, H.; Pirso, J.; Annuka, H. (1998). Features of wear of TiC-base hardmetals. Proceedings of the World Congress and Exhibition on Powder Metallurgy: World Congress and Exhibition on Powder Metallurgy, October 18-22, Granada (Spain). London: European Powder Metallurgy Association, 75−79.
3.4.
1998
Reshetnyak, H., Kübarsepp, J. (1998). Reliability characteristics of hardmetals. Proceedings of the World Congress and Exhibition on Powder Metallurgy, 1998: World Congress and Exhibition on Powder Metallurgy, Granada, Spain, October 18-22, 1998. Shrewsbury, UK: European Powder Metallurgy Association, 15−20.
3.4.
1998
Reshetnyak, H.; Kübarsepp, J. (1998). Features of hardmetals wear resistance. NORDTRIB '98 : proceedings of the 8th International Conference on Tribology, Ebeltoft, Denmark, 7-10 June 1998, 1: 8th International Symposium on Tribology NORDTRIB 1998, Ebeltoft, Denmark, June 7-10 ,1998. Arhus: DTI Tribology Centre, 239−246.
6.2.
1998
Kulu, P.; Kübarsepp, J.; Valdma, L. (1998). Metalliõpetus ja metallide tehnoloogia. 1, Metalliõpetus ja metallurgia. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
1997
Reshetnyak, H.; Kubarsepp, J. (1997). Structure sensitivity of wear resistance of hardmetals. International Journal of Refractory Metals & Hard Materials, 15, 89−98.
3.2.
1997
Laansoo, A.; Kübarsepp, J. (1997). Application of magnetic methods for structure investigation of steel-bonded hardmetals. Proceedings of the 1st International Conference : 25-27th september 1997, Tallinn, Estonia: International DAAAM Conference, 25-27th September 1997, Tallinn, Estonia. Tallinn: Tallinn Technical University, 145−148.
3.2.
1997
Kübarsepp, J.; Reshetnjak, H. (1997). Structure sensitivity of hard metals and their durability in metal forming operations. Proceedings of the 1st International Conference : 25-27th september 1997, Tallinn, Estonia: International DAAAM Conference, 25-27th September 1997, Tallinn, Estonia. Tallinn: Tallinn Technical University, 133−136.
3.2.
1997
Baranovskaja, I.; Kübarsepp, J.; Kallast, V. (1997). Enhancement of corrosion resistance in stainless TiC-base hardmetals. Proceedings of the 1st International Conference : 25-27th september 1997, Tallinn, Estonia: International DAAAM Conference in Estonia, 25-27th september 1997, Tallinn, Estonia. Tallinn: Tallinn University of Technology Press, 6−12.
3.3.
1997
Kull, Rein; Nirk, Tavi; Raesaar, Peeter; Hödrejärv, Helvi; Mikkal, Valdek; Randlepp, Arne; Jõgi, Aksel; Uibopuu, Lembit; Lippmaa, Helle; Viikna, Anti; Kübarsepp, Jakob; Kulu, Priit; Märtson, Ivar; Üksti, Lembit; Vällo, Arnold; Kulbach, Valdek; Nõmm, Vaike; Kann, Jüri; Vaimel, Ants; Tiigimägi, Eeli ... Parmasto, Erast (1997). Teaduse ja tehnika seletav sõnaraamat = Dictionary of science and technology : inglise-eesti. Tallinn: TEA Kirjastus.
5.2.
1997
Kübarsepp, J.; Reshetnjak, H.; Annuka, H. (1997). Serviceability characteristics of steel-bonded hardmetals and their structure sensitivity. Abstracts of International Conference on Novel Processes and Materials in Powder Metallurgy: "International Conference ""Novel Processes and Materials in Powder Metallurgy"" : PM-97 : November 24-28, 1997, Kiev, Ukraine. Kiev: Ukrainian Academy of Sciences, 330.
5.2.
1997
Kübarsepp, J.; Pirso, J.; Annuka, H. (1997). Non-tungsten and non-cobalt cermets with designed serviceability characteristics. Abstracts of 7th international Exhibition and Symposium on powder Metallurgy: 7th International Exhibition and Symposium on Powder Metallurgy, March 18-21 Minsk, Belorussia. Minsk: Belorussian Academy of Sciences, 91.
5.2.
1997
Pirso, J.; Kübarsepp, J.; Liiskmann, G. (1997). Cermets with designed characteristics fo wear and wear-corrosion working conditions. Proceedings of Joint Nordic Conference on Powder Technology: Joint Nordic Conference in Powder Technology, November 26-27, Helsinki (Finland). Helsinki: Helsinki University of Technology, 38.
6.2.
1997
Kulu, P.; Kübarsepp, J. (1997). Metalliõpetus ja metallide tehnoloogia : eesti-inglise-saksa-vene terminid ja määratlused. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.2.
1996
Pirso, J.; Kübarsepp, J. (1996). Oxidation resistance of titanium and chromium carbide-base cermets. Proceedings of the Estonian Academy of Sciences. Engineering, 1, 4−13.
1.1.
1994
Reshetnjak, H.; Kübarsepp, J. (1994). Mechanical properties of hard metals and their erosive wear resistance. Wear, 177 (2), 185−193. DOI: 10.1016/0043-1648(94)90244-5.
1.1.
1994
Kübarsepp, J.; Kallast, V. (1994). Stainless hardmetals and their electrochemical corrosion resistance. Werkstoffe und Korrosion, 452−458.
1.1.
1994
Kubarsepp, J.; Reshetnyak, H.; Annuka, H. (1994). Characterization of the serviceability of steel-bonded hardmetals. International Journal of Refractory Metals & Hard Materials, 12 (6), 341−348.
1.2.
1993
Kübarsepp, J.; Annuka, H.; Valdma, L. (1993). Application Areas of Steel- bonded Cermets as Tool and Structural Material. Вестник машиностроения = Vestnik Mashinostroenija, 3, 31−35.
1.1.
1992
Levinskii, Y.V.; Kübarsepp, J.P.; Petrov, A.P. (1992). Titanium carbide-based carbide steels made of chips of titanium alloys. Soviet Powder Metallurgy and Metal Ceramics, 31 (10), 886−889.
2.2.
1991
Kübarsepp, J. (1991). Твердые сплавы со стальной связкой. Tallinn: Valgus.
1.1.
1990
Kübarsepp, J.P.; Annuka, H.I.; Reshetnyak, H.D.; Maistrenko, A.L.; Chepovetskii, G.I. (1990). Cracking resistance and strength of carbide steels. Soviet Powder Metallurgy and Metal Ceramics, 29 (1), 83−87. DOI: 10.1007/BF00796103.
1.1.
1990
Kübarsepp, J.P.; Reshetnyak, H.D. (1990). Indices of the serviceability of carbide steels. Soviet Powder Metallurgy and Metal Ceramics, 29 (2), 131−135. DOI: 10.1007/BF00794538.
1.1.
1989
Reshetnyak, H.D.; Kübarsepp, J.P.; Sepp, A.H.; Annuka, H.J. (1989). Some regularities of carbide steels wear in the conditions of abrasive-erosion. Trenie i Iznos, 10 (3), 525−529.
1.1.
1989
Kallast, V.; Kübarsepp, J.; Schächter, K.; Lohonyai, N. (1989). Corrosion and wear resistance of TiC-based chromium steel bonded PM hardmetals. Periodica Polytechnica Chemical Engineering, 33 (2), 141−148.
1.1.
1989
Kallast, V.A.; Kübarsepp, J.P. (1989). Corrosion resistance of TiC-Fe-Cr alloys and its effect on corrosion-abrasive wear. Protection of Metals, 25 (1), 88−91.
1.1.
1989
Kübarsepp, J.P.; Annuka, H.I. (1989). Bend and impact strength of steel-bonded carbides. Soviet Powder Metallurgy and Metal Ceramics, 28 (10), 805−809.
1.1.
1988
Kübarsepp, J.P. (1988). Oxidation of components of the TiC-Fe-Cr system in presintering a powder carbide steel. Soviet Powder Metallurgy and Metal Ceramics, 27 (3), 215−218. DOI: 10.1007/BF00802595.
1.1.
1987
Kallast, V.A.; Kübarsepp, J.P. (1987). Corrosion resistance of titanium carbide hard metals produced from powders. Protection of Metals, 23 (4), 466−469.
1.1.
1987
Valdma, L.E.; Annuka, H.J.; Kübarsepp, J.P. (1987). Wear resistance - strength complex of powder carbide steels. Trenie i Iznos, 8 (2), 368−373.
1.1.
1987
Kallast, V.; Kübarsepp, J.; Schächter, K.; Lohonyai, N. (1987). Corrosion resistance of corrosion-proof PM hardmetals TiC- steel. Periodica Polytechnica Chemical Engineering, 31 (4), 213−219.
1.1.
1987
Kübarsepp, J.P.; Valdma, L.E.; Annuka, H.I. (1987). Some problems of the production and application of titanium carbide alloys with steel bonds. Metal Science and Heat Treatment, 29 (3), 213−216. DOI: 10.1007/BF00772871.
1.1.
1987
Pirso, J.J.; Kübarsepp, J.P (1987). Effect of heat and chemicothermal treatment on the properties of powder hard alloys. Metal Science and Heat Treatment, 29 (3), 211−213. DOI: 10.1007/BF00772870.
1.1.
1986
Kübarsepp, J.P. (1986). Production of high chromium alloys TiC-Fe-Cr alloyed with silicon. Soviet Powder Metallurgy and Metal Ceramics, 25 (5), 410−414. DOI: 10.1007/BF00813957.
1.1.
1985
Kübarsepp, J.P.; Annuka, H.J.; Valdma, L.E. (1985). Study of TiC-steel hardmetals application in some conditions of abrasive-erosion and hydroabrasive wear. Trenie i Iznos, 6 (5), 851−858.
1.1.
1985
Kübarsepp, J.P.; Valdma, L.E.; Annuka, H.J. (1985). Some ways of increasing abrasion-erosion resistance of TiC- steel hardmetals. Trenie i Iznos, 6 (4), 698−703.
1.1.
1985
Kübarsepp, J.P. (1985). Effect of carbon concentration in binder on the mechanical properties of heat-treatable titanium carbide-steel alloys. Soviet Powder Metallurgy and Metal Ceramics, 24 (3), 214−216. DOI: 10.1007/BF00795831.
1.1.
1984
Kübarsepp, J.P.; Arensburger, D.S. (1984). Characteristics of the milling of titanium carbide-iron powder mixtures with steel balls. Soviet Powder Metallurgy and Metal Ceramics, 23 (7), 496−499. DOI: 10.1007/BF00792113.
1.2.
1984
Kübarsepp, J.P.; Dzykovich, I.Ya. (1984). Contact interaction of titanium carbide with some iron alloys. Adgeezia rasplavov i paika materialov, 13, 66−70.
1.1.
1983
Valdma, L.E.; Kübarsepp, J.P. (1983). Hydroabrasive wear resistance of sintered heat-treatable hardmetals. Trenie i Iznos, 4 (6), 1046−1050.
1.1.
1982
Lavrenko, V.A.; Procenko, T.G.; Kübarsepp, J.P.; Valdma, L.E. (1982). Oxidation of TiC-based hard alloys containing iron, chromium and silicon. Sverkhtverdye Materialy, 2, 47−50.
1.2.
1981
Panasyuk, A.D.; Kubarsepp, J.P.; Dzykovich, I.Ya.; Valdma, L.E. (1981). Contact reactions of titanium carbide with iron-base alloys. Soviet Powder Metallurgy and Metal Ceramics, 20 (4), 291−296.
1.1.
1980
Kübarsepp, J.P.; Arensburger, D.S.; Valdma, L.E. (1980). Wear resistance of sintered TiC-steel alloys in liquid corrosive and abrasive media. Soviet Powder Metallurgy and Metal Ceramics, 19 (9), 659−662. DOI: 10.1007/BF00790562.
1.2.
1980
Kübarsepp, J.; Valdma, L.; Kallast, V. (1980). Corrosion resistance of sintered TiC-steel alloys. Soviet Powder Metallurgy and Metal Ceramics, 19 (4), 293−294.
1.1.
1978
Arensburger, D.S.; Kübarsepp, J.P. (1978). Conditions of milling of TiC-Fe-Cr powder mixtures. Soviet Powder Metallurgy and Metal Ceramics, 17 (10), 740−743. DOI: 10.1007/BF00796356.

Industrial property

30.12.2020

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid