See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Priidu Peetsalu

https://etis.ee/CV/Priidu_Peetsalu/est
31.03.1976
+372 6203470
priidu.peetsalu@taltech.ee

Teenistuskäik

Töökohad ja ametid
01.01.2017–30.04.2022   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Vanemteadur (1,00)
01.01.2017–30.04.2022   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Labori juhataja (0,50)
2015–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanika ja metroloogia katselaboratoorium, Labori juhataja (0,50)
01.01.2011–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Vanemteadur (0,50)
01.09.2009–31.08.2012   
Tallinna Tehnikaülikool, TTÜ Tartu Kolledž, Dotsent (0,50)
01.01.2008–31.08.2009   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Vanemteadur (1,00)
01.09.2003–31.12.2007   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Assistent (0,75)
2000–31.08.2003   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Insener (0,50)
 
 
Haridustee
2003–2007   
TTÜ Masina- ja aparaadiehitus, PhD
2001–2003   
TTÜ tootmistehnika õppesuund, tehnikateaduste magister
1997–2000   
TTÜ Mehaanikateaduskond, tootmistehnika õppesuund, bakalaureus
1994–1997   
Tartu Ülikooli füüsikateaduskond, (üleminek TTÜ mehaanikateaduskonda)
1991–1994   
Ülenurme keskkool
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
Eesti materjalitehnika ühing, liige
 
 
Lisainfo
2000 aastast alates akrdediteeritud TTÜ Mehaanika ja Metroloogia Katselabori metallide katseala ekspert

Kvalifikatsioon

Teaduskraadid
Priidu Peetsalu, doktorikraad, 2007, (juh) Priit Kulu, Mikrostuctural Aspects of Thermal Sprayed WC-Co Coatings and Ni-Cr Coated Steels (WC-Co Termopinnete ja Ni-Cr pinnatud teraste metallograafilised aspektid), Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut.
Priidu Peetsalu, magistrikraad (teaduskraad), 2003, (juh) Priit Kulu, Mikromeetriliste metallipulbrite omaduste uurimine, Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool.
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus
 
 
Lisainfo
Volitatud mehaanikainsener tootmistehnika alal, tase 8

Jooksvad projektid

Lõppenud projektid

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2020
Lille, H.; Ryabchikov, A.; Peetsalu, P.; Lind, L.; Sergejev, F.; Mikli, V.; Kübarsepp, J. (2020). Residual Stresses on Various PVD Hard Coatings on Tube and Plate Substrates. Coatings, 10 (11), 1054. DOI: 10.3390/coatings10111054.
3.1.
2019
Lille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Mikli, Valdek; Adoberg, Eron; Vägiström, Heinar; Kübarsepp, Jakob; Peetsalu, Priidu (2019). Average residual stresses in hard physical vapor deposited (PVD) coatings. In: Kubarsepp, Jakob; Hussainova, Irina; Otto, Tauno; Karjust, Kristo (Ed.). Key Engineering Materials (20−25). Conference Modern Materials and Manufacturing, MMM 2019; Tallinn; Estonia; 24 April 2019 through 26 April 2019. Trans Tech Publications Ltd. DOI: 10.4028/www.scientific.net/KEM.799.20.
3.1.
2018
Lille, H.; Ryabchikov, A.; Kõo, J.; Adoberg, E.; Mikli, V.; Kübarsepp, J.; Peetsalu, P. (2018). Evaluation of residual stresses in PVD coatings by means of tubular substrate length variation. In: M. Seefeldt (Ed.). Materials Research Proceedings / MRP (131−136). Materials Research Forum LLC. (Residual Stresses 2018 – ECRS-10). DOI: 10.21741/9781945291890-21.
1.2.
2017
Saage, Ragnar; Peets, Jüri; Kulu, Priit; Peetsalu, Priidu; Viljus, Mart (2017). Metallographic investigation of iron blooms and bars from the smithy site of Käku, Estonia. Fennoscandia Archaeologica, XXXIV, 46−58.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Adoberg, Eron; Kurissoo, Liisa; Peetsalu, Priidu; Lind, Liina (2017). Evaluation of residual stresses in PVD coatings by means of the curvature method of plate. In: Dagnija Loca (Ed.). Engineering Materials and Tribology XXV (404−408). Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.404.
3.1.
2017
Saarna, M.; Lind, L.; Peetsalu, P.; Sergejev, F. (2017). Cyclic Loading of TiCN Coating by Vickers Indentation. In: D. Loca (Ed.). Engineering Materials and Tribology XXV (425−429). Baltmattrib 2016, Riia, 3-4 November. Trans Tech Publications Ltd : Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.425.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Adoberg, Eron; Lind, Liina; Kurissoo, Liisa; Peetsalu, Priidu (2017). Evaluation of residual stresses in PVD coatings by means of strip substrate length variation and curvature method of plate substrate. In: Regita Bendikienė, Kazimieras Juzėnas (Ed.). Materials Engineering 2017 (212−218). Trans Tech Publications Ltd. ( Solid State Phenomena). DOI: 10.4028/www.scientific.net/SSP.267.212.
1.1.
2016
Jaason, K; Peetsalu, P.; Kulu, P.; Saarna, M.; Beilmann, J. (2016). Predictive tools for the isothermal hardening of strip steel parts in molten salt. Proceedings of the Estonian Academy of Sciences, 65 (2), 152−158. DOI: 10.3176/proc.2016.2.04.
1.1.
2016
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Beilmann, J. (2016). Decarburisation Effect on Hardened Strip Steel Fastening Components. Materials Science, 22 (1), 148−152. DOI: 10.5755/j01.ms.22.1.7467.
1.1.
2016
Sepper, S.; Peetsalu, P.; Kulu, P.; Saarna, M.; Mikli, V. (2016). The role of silicon in the hot dip galvanizing process. Proceedings of the Estonian Academy of Sciences, 65 (2), 159−165. DOI: 10.3176/proc.2016.2.11.
6.7.
2016
Taklaja, P.; Kiitam, I.; Peetsalu, P.; Antonov, M. (2016). Kaetud keskpinge õhuliinijuhtmete uuring. Tallinn: TTÜ elektroenergeetika instituut.
1.1.
2015
Lind, L.; Peetsalu, P.; Sergejev, F. (2015). Wear of Different PVD Coatings at Industrial Fine-blanking Field Tests. Materials Science, 21 (3), 343−348. DOI: 10.5755/j01.ms.21.3.7249.
1.1.
2015
Lend, H.; Ratas, K.; Peetsalu, P. (2015). Measurement of Geometry of Small Axisymmetric Sheet Metal Component after Forming. International Journal of Material Forming, 21 (3), 473−478. DOI: 10.5755/j01.ms.21.3.7384.
1.1.
2015
Kulu, P.; Tarbe, R.; Saarna, M.; Surzenkov, A.; Peetsalu, P.; Talviste, K. (2015). Wear resistance and selection of steels, hardmetals and hardfacings for abrasive wear conditions. International Journal of Microstructure and Materials Properties, 10 (2), 101−113. DOI: 10.1504/IJMMP.2015.068718.
3.1.
2015
Veinthal, R.; Peetsalu, P.; Saarna, M.; Sergejev, F. (2015). Punch lifetime in fine-blanking with optimum combination of mechanical properties. In: Proceedings - European Conference on Heat Treatment and 22st IFHTSE Congress (1−7). . Venice, Italy: Associazione Italiana di Metallurgia (AIM).
6.7.
2015
Taklaja, P.; Kiitam, I.; Peetsalu, P.; Saarna, M.; Kurissoo, L. (2015). Vananevate juhtmete füüsikalised omadused. Tallinn: TTÜ elektroenergeetika instituut.
3.1.
2014
Aruniit, A.; Kers, J.; Krumme, A.; Peetsalu, P. (2014). Particle size and proportion influence to impact properties of particulate polymer composite. Proceedings of the 9th International Conference of DAAAM Baltic Industrial Engineering : 24-26st April 2014, Tallinn, Estonia: 9th international conference of DAAAM Baltic industrial engineering; April 24 -26, 2014; Tallinn, Estonia. TUT, 325−330.
3.1.
2014
Sergejev, F.; Lind, L.; Antonov, M.; Peetsalu, P.; Adoberg, E. (2014). Contact behavior of the hard thin ceramic coatings under cyclic loading. 5th World Tribology Congress, WTC 2013, 3. Politecnico di Torino (DIMEAS), 2193−2196.
3.2.
2014
Kulu, P.; Tarbe, R.; Saarna, M.; Surzenkov, A.; Peetsalu, P.; Viljus, M. (2014). Steels, hardmetals and hardfacings for abrasive wear applications. European Conference on Heat Treatment and 21st IFHTSE Congress, Munich, Germany, 12-15 May 2014. IFHTSE , 449−456.
3.4.
2014
Veinthal, R.; Peetsalu, P.; Saarna, M.; Talkop, A. (2014). Durability of Complex Shape Punch in Thick Sheet Metal Fine-blanking. Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress, May 12th-15th, Munich, Germany. Ed. H-W. Zoch, R. Schneider, T. Lübben. Munich, Germany: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V (AWT); www.awt-online.org, 399−406.
1.2.
2012
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Mikli, V.; Lind, L.; Beilmann, J. (2012). Influence of Steel Austenitization to Part Quality in Continuous Austempering. Estonian Journal of Engineering, 18 (3), 221−231.
1.2.
2012
Adoberg, E.; Podgurski, V.; Peetsalu, P.; Lind, L.; Mikli, V.; Hvizdos, P.; Kulu, P. (2012). The Effect of Surface Pre-Treatment and Coating Post-Treatment to the Properties of TiN Coating. Estonian Journal of Engineering, 18 (3), 185−192.
3.1.
2012
Sepper, S.; Peetsalu, P.; Mikli, V.; Saarna, M. (2012). The effect of substrate microstructure on morphology of zinc coatings. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 2: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Ed. Otto, T. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 717−722.
3.4.
2012
Sepper, S.; Peetsalu, P.; Saarna, M.; Kirs, V.; Mikli, V. (2012). High strength steel behaviour during hot dip galvanizing. Proceedings 20th IFHTSE: International Federation for Heat Treatment and Surface Engineering Congress, Beijing, China, October 23-25, 2012. Chinese Heat Treatment Society, 525−529.
1.1.
2011
Sergejev, F.; Peetsalu, P.; Sivitski, A.; Saarna, M.; Adoberg, E.. (2011). Surface fatigue and wear of PVD coated punches during fine blanking operation. Engineering Failure Analysis, 18 (7), 1689−1697. DOI: 10.1016/j.engfailanal.2011.02.011.
1.2.
2011
Križan, P.; Matúš, M.; Šooš, L.; Kers, J.; Peetsalu, P.; Kask, Ü.; Menind, A. (2011). Briquetting of municipal wastes by different technologies for quality and properties evaluation. Agronomy Research, 19, 115−123.
1.2.
2011
Sepper, S.; Peetsalu, P.; Saarna, M. (2011). Methods to evaluate the appearance of hot dip galvanized coatings. Agronomy Research, 9, 229−236.
3.1.
2011
Laurmaa, V.; Kers, J.; Tall, K.; Mikli, V.; Goljandin, D.; Vilsaar, K.; Peetsalu, P.; Saarna, M.; Tarbe, R.; Zhang, L. (2011). Mechanical recycling of electronic wastes for materials recovery. In: Zhang, L.; Krumdick, G.K. (Ed.). Recycling of Electronic Waste II: Proceedings of the Second Symposium (3−10). . Hoboken, New Jersey, USA: John Wiley & Sons Ltd.
5.2.
2011
Kers, J.; Saarna, M.; Peetsalu, P.; Aruniit, A.; Majak, J.; Pohlak, M.; Herranen, H. (2011). Selection of parameters in adhesive bonding of composite structures. 20th International Baltic Conference, Materials Engineering 2011, Book of Abstracts: 20th International Baltic Conference, Materials Engineering, Kaunas, Lihtuania, October 27-28. Kaunas, Lithuania: Kaunas University of Technology Press, 53−53.
1.2.
2010
Peetsalu, P.; Resev, J.; Ruus, A.; Menind, A.; Kers, J.; Sepper, S.; Olt, J. (2010). Preliminary investigation into mechanical properties of clay reinforced with natural fibres. Agronomy Research, 8, 201−207.
1.2.
2010
Kers, J.; Peetsalu, P.; Saarna, M.; Viikna, A.; Krumme, A.; Menind, A. (2010). Preliminary investigation into tensile characteristics of long flax fibre reinforced composite material. Agronomy Research, 8, 107−114.
3.1.
2010
Lind, L.; Peetsalu, P.; Põdra, P.; Adoberg, E.; Veinthal, R.; Kulu, P. (2010). Description of Punch Wear Mechanism During Fine Blanking Process. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, 2: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn: Tallinn University of Technology Press, 504−509.
3.2.
2010
Peetsalu, P.; Saarna, M.; Adoberg, E.; Kulper, E.; Lind, L.; Kulu, P. (2010). Evaluation of punch wear resistance during industrial test. Acta Metallurgica Slovaca Conference, 1: 14th International Symposium on Metallography, 28-30 April 2010, Starà Lesnà, Slovak Republic. , 105−110.
5.2.
2010
Adoberg, E.; Surženkov, A.; Podgurski, V.; Peetsalu, P.; Kulu, P. (2010). Pre- and posttreatment effect to the surface properties of thin hard coatings. Proceedings of the XIX-th International Baltic Conference "Materials Engineering & Balttrib-2010": 19th International Conference "Materials Engineering & Balttrib-2010", Riga, Latvia, 28-29 October 2010. Ed. J. Grabis, J. Krastins. Riga, Latvia: Riga Technical University, 44.
3.1.
2009
Peetsalu, P.; Mikli, V.; Ratas, K.; Kulper, E.; Jaason, K. (2009). Bainitic Structure Effect on Hydrogen Embrittlement. Proceedings of the 17th IFHTSE Congress: 17th IFHTSE Congress, Kobe, Japan; October 27-30, 2008. The Japan Society for Heat Treatment, 592−595. (Netsu Shori (Journal of the Japan Society for Heat Treatment); 49).
1.2.
2008
Mäll, Jaak; Peetsalu, Priidu (2008). Kodasoo raudkübar. Metallograafiliste uuringute tulemusi. Leimus, Ivar (Toim.). Räägime asjast (7−15).. Tallinn: Eesti Ajaloomuuseum. (Varia Historica; III).
3.1.
2008
Zhang, L.; Zuo, Xi.n; Kers, J.; Peetsalu, P.; Xu, S. (2008). Recycling of electronic wastes: Degradation and combustion. EPD Congress 2008 held at the 2008 Annual TMS Meeting and Exhibition. Ed. Howard, S.M . Minerals, Metals & Materials Society, 491−496.
3.1.
2008
Zhang, L.; Zuo, X.; Kers, J.; Goljandin, D.; Peetsalu, P. (2008). Mechanical and Pyrometallurgical Recycling of Electronic Wastes. REWAS 2008 (Global Symposium on Recycling, Waste Treatment and Clean Technology), Cancun, Mehhiko, 12-15.10.2008. Ed. B. Mishra, C. Ludwig, S. Das. Mehhiko: TMS (The Minerals, Metals & Materials Society), 699−708.
3.1.
2008
Saarna, M., Peetsalu, P. (2008). Effect of mean stress on fatigue strength of duplex steels in synthetic white water environment. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (531−536). . Tallinn: Tallinn University of Technology.
1.1.
2007
Zimakov, S.; Goljandin, D.; Peetsalu, P.; Kulu, P. (2007). Metallic powders produced by the disintegrator technology. International Journal of Materials and Product Technology, 28, 226−251.
1.2.
2007
Peetsalu, P.; Saarna, M.; .Mikli, V.; Juurma, M. (2007). Computer Based Steel Microstructure Analysis Describing the Size and Distribution of Structure Phases. Acta Metallurgica Slovaca, 13, 91−95.
2.3.
2007
Peetsalu, P. (2007). Mikrostructural aspects of thermal sprayed WC-Co coatings and NiI-Cr coated steels. (Doktoritöö, Tallinna Tehnikaülikool). Tallinn: Tallinn University of Technology Press.
3.4.
2007
Peetsalu, P.; Saarna, M.; Mikli, V. (2007). Assesment of Non-metallic Inclusions in Sheet Metals by Computer Analysis. Proceedings of the Seventh Inernational Conference on Clean Steel: sevent international conference Clean Steel, Hungary 2007. Balatonfüred, Hungary: Hungarian Mining and Metallurgical society (OMBKE), 332−341.
1.2.
2006
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterizationa of WC-CO thermal spray coatings based on the composite powders. Powder Metallurgy Progress, 6 (1), 34−41.
1.2.
2006
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterization of WC-Co composite thermal spray powder and coating. Proceedings of the Estonian Academy of Sciences. Engineering, 12 (4), 435−444.
3.1.
2006
Tarbe, R.; Zimakov, S.; Peetsalu, P.; Kulu, P.; Mikli, V. (2006). Experimental Spray Powders and Coatings Produced from Recycled Hardmetal by Various Mechanical Methods. Euro PM2006 Congress & Exhibition Proceedings, Hard Materials, 1: Euro PM2006, Ghent, Belgium, 23-25 October 2006. Ed. European Powder Metallurgy Association. European Powder Metallurgy Association, 259−264.
3.4.
2006
Zimakov, S.; Peetsalu, P.; Pirso, J.; Kulu, P.; Mikli, V. (2006). Thermal spray coatings from WC-Co powders produced by mechanically activated synthesis. Thermal Spray 2006: Building on 100 Years of Success + Proceedings of International Thermal Spray Conference (ITSC) & Exposition, 15-18 May 2006, Seattle, USA [CD-ROM]: International Thermal Spray Conference (ITSC) & Exposition, 15-18 May 2006, Seattle, USA. Ed. Marple, B.R.; Hyland, M.M.; Lau, Y.-C.; Lima, R.S.; Voyer, J. Asm International.
5.2.
2006
Peetsalu, P.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterization of WC-Co composite thermal spray powder and coating. Proceedings of 15th International Baltic Conference Engineering Materials & Tribology : BALTMATTRIB 2006: The 15th International Baltic Conference Engineering Materials & Tribology, BALTMATTRIB 2006, Tallinn, Estonia, 5-6 Oct. 2006. , 52−53.
1.2.
2005
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.;Kulu, P. (2005). Technology and characterization of composite thermal spray powders. Materials Science, 11 (4), 385−389.
3.1.
2005
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2005). Characterization of Composite Thermal Spray Powders. Euro PM2005 Powder Metallurgy Congress & Exhibition : Proceedings: Euro PM2005 Powder Metallurgy Congress & Exhibition, Prague Congress Centre, Czech Republic 2 - 5 Oct. 2005. EPMA, 87−92.
3.4.
2005
"Zimakov, Sergei;Kulu, Priit;Goljandin, Dmitri;Peetsalu, Priidu" (2005). Microstructured cermet powders for HVOF spraying. Proceedings of Jurmala International Conference Welding and Powder Metallurgy : April 28-29, Jurmala, Latvia. Jurmala: TTY puuduv kirjastus, ? p. [CD-ROM]−? p. [CD-ROM].
5.2.
2005
Kulu, P.; Zimakov, S.; Podgurski, V.; Peetsalu, P.; Tarbe, R. (2005). Nanopowders and nanostructured coatings. In: Nanopowders, Nanostructured Materials and Coatings : Network for Nanostructured Materials of ACC : March 17, 2005, Tallinn, Estonia : book of abstracts (8). . Tallinn: Tallinna Tehnikaülikooli Kirjastus.
5.2.
2005
Tarbe, R.; Peetsalu, P.; Zimakov, S.; Kulu, P. (2005). Spray powders and coatings produced from used hardmetal by various mechanical methods. Abstracts of Papers of 14th International Baltic conference: Materials Engineering - 2005. Kaunas (Lithuania), October 6 - 7. Kaunas: Kauno technologijos universitetas, 39.
1.2.
2004
Mikli, V.; Kulu, P.; Tarbe, R.; Peetsalu, P.; Zimakov, S. (2004). Recycled hardmetal based powders for thermal spray. Proceedings of the Estonian Academy of Sciences. Engineering, 10 (4), 315−325.
3.4.
2004
Kulu, P.; Goljandin, D.; Peetsalu, P. (2004). Metal powders produced by mechanical methods. Proceedings of PM2004 Powder Metallurgy World Congress, Vienna, Austria, 1: PM2004 Powder Metallurgy World Congress, Wien, October 17-21 2004. EPMA, 157−162.
3.4.
2004
"Kulu, Priit;Goljandin, Dmitri;Peetsalu, Priidu" (2004). Metal powders produced by mechanical methods. (58−58). . TTY puuduv kirjastus.
3.4.
2004
Mikli, Valdek; Kulu, Priit; Tarbe, Riho; Peetsalu, Priidu (2004). Double-cemented recycled hardmetal based powders for thermal spray. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn, Estonia, 211−214.
1.2.
2003
Peetsalu, P.; Goljandin, D.; Kulu, P.; Mikli, V.; Käerdi, H. (2003). Micropowders produced by disintegrator milling. Powder Metallurgy Progress, 3 (2), 99−110.
1.2.
2002
Kulu, P.; Zimakov, S.; Goljandin, D.; Peetsalu, P. (2002). Novel Thermal Spray Powders for Corrosion and Wear Resistant Coatings. Materials Science, 8 (4), 413−416.
3.4.
2002
Goljandin, D.; Kulu, P.; Peetsalu, P. (2002). Ultrafine metal powders produced by grinding from the industrial wastes. Proceedings of TMS2002 Extraction and Proceeding Division Meeting on Recycling and Waste Treatment in Mineral and Metal Processing: Technical and Economical Aspects, 1. , 277−284.
3.5.
2002
Kulu, P.; Zimakov, S.; Goljandin, D.; Peetsalu, P. (2002). Novell Thermally Sprayed Corrosion and Wear Resistant Coatings. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME" : 25-27 April 2002, Tallinn, Estonia: 3rd International Conference "Industrial Engineering - New Challenges to SME", Tallinn, Estonia, 25-27 April 2002. Tallinn: Tallinn Technical University, 169−172.
3.4.
2001
Kommel, L.; Peetsalu, P.; Veinthal, R. (2001). Evolution of Microstructure and Properties in Ti-alloys During Rapid Electrocontact Heating with SPD. Proceedings of the X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, 2001, September 27-28. Riga Technical University, 62−66.
20.12.2021

Priidu Peetsalu

https://etis.ee/CV/Priidu_Peetsalu/eng
31.03.1976
+372 6203470
priidu.peetsalu@taltech.ee

Career

Institutions and positions
01.01.2017–30.04.2022   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , (1,00)
01.01.2017–30.04.2022   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Head of laboratory (0,50)
2015–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Laboratory of Mechanical Testing and Metrology, Head of laboratory (0,50)
01.01.2011–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Senior Researcher (0,50)
01.09.2009–31.08.2012   
Tallinn University of Technology , Tartu College of TUT, Associate Professor (0,50)
01.01.2008–31.08.2009   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Senior Researcher (1,00)
01.09.2003–31.12.2007   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Assistant (0,75)
2000–31.08.2003   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Engineer (0,50)
 
 
Education
2003–2007   
TUT Mechanical Engineering, PhD
2001–2003   
TUT Faculty of Mechanical Engineering, Production Engineering, Master of Engineering scientist
1997–2000   
TUT Faculty of Mechanical Engineering, Production Engineering
1994–1997   
University of Tartu, Faculty of Physics (transfer to TUT Faculty of Mechanical Engineering)
1991–1994   
Ülenurme Highschool
 
 
R&D related managerial and administrative work
Estonian Materials Engineering Society, member
 
 
Additional information
Since 2000 Tallinn University of Tecnology Mechanical Testing and Metrology accredited laboratory, expert of metallic materials

Qualifications

Academic degrees
Priidu Peetsalu, Doctor's Degree, 2007, (sup) Priit Kulu, Mikrostuctural Aspects of Thermal Sprayed WC-Co Coatings and Ni-Cr Coated Steels, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering.
Priidu Peetsalu, Research Master's Degree, 2003, (sup) Priit Kulu, Mikromeetriliste metallipulbrite omaduste uurimine (Characterization of micrometric metal powder), Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering Chair of Materials Science.
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science
 
 
Additional information
Chartered Mechanical Engineer, level 8

Projects in progress

Completed projects

Supervised dissertations

Publications

Category
Year
Publication
 
1.1.
2020
Lille, H.; Ryabchikov, A.; Peetsalu, P.; Lind, L.; Sergejev, F.; Mikli, V.; Kübarsepp, J. (2020). Residual Stresses on Various PVD Hard Coatings on Tube and Plate Substrates. Coatings, 10 (11), 1054. DOI: 10.3390/coatings10111054.
3.1.
2019
Lille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Mikli, Valdek; Adoberg, Eron; Vägiström, Heinar; Kübarsepp, Jakob; Peetsalu, Priidu (2019). Average residual stresses in hard physical vapor deposited (PVD) coatings. In: Kubarsepp, Jakob; Hussainova, Irina; Otto, Tauno; Karjust, Kristo (Ed.). Key Engineering Materials (20−25). Conference Modern Materials and Manufacturing, MMM 2019; Tallinn; Estonia; 24 April 2019 through 26 April 2019. Trans Tech Publications Ltd. DOI: 10.4028/www.scientific.net/KEM.799.20.
3.1.
2018
Lille, H.; Ryabchikov, A.; Kõo, J.; Adoberg, E.; Mikli, V.; Kübarsepp, J.; Peetsalu, P. (2018). Evaluation of residual stresses in PVD coatings by means of tubular substrate length variation. In: M. Seefeldt (Ed.). Materials Research Proceedings / MRP (131−136). Materials Research Forum LLC. (Residual Stresses 2018 – ECRS-10). DOI: 10.21741/9781945291890-21.
1.2.
2017
Saage, Ragnar; Peets, Jüri; Kulu, Priit; Peetsalu, Priidu; Viljus, Mart (2017). Metallographic investigation of iron blooms and bars from the smithy site of Käku, Estonia. Fennoscandia Archaeologica, XXXIV, 46−58.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Adoberg, Eron; Kurissoo, Liisa; Peetsalu, Priidu; Lind, Liina (2017). Evaluation of residual stresses in PVD coatings by means of the curvature method of plate. In: Dagnija Loca (Ed.). Engineering Materials and Tribology XXV (404−408). Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.404.
3.1.
2017
Saarna, M.; Lind, L.; Peetsalu, P.; Sergejev, F. (2017). Cyclic Loading of TiCN Coating by Vickers Indentation. In: D. Loca (Ed.). Engineering Materials and Tribology XXV (425−429). Baltmattrib 2016, Riia, 3-4 November. Trans Tech Publications Ltd : Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.425.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Adoberg, Eron; Lind, Liina; Kurissoo, Liisa; Peetsalu, Priidu (2017). Evaluation of residual stresses in PVD coatings by means of strip substrate length variation and curvature method of plate substrate. In: Regita Bendikienė, Kazimieras Juzėnas (Ed.). Materials Engineering 2017 (212−218). Trans Tech Publications Ltd. ( Solid State Phenomena). DOI: 10.4028/www.scientific.net/SSP.267.212.
1.1.
2016
Jaason, K; Peetsalu, P.; Kulu, P.; Saarna, M.; Beilmann, J. (2016). Predictive tools for the isothermal hardening of strip steel parts in molten salt. Proceedings of the Estonian Academy of Sciences, 65 (2), 152−158. DOI: 10.3176/proc.2016.2.04.
1.1.
2016
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Beilmann, J. (2016). Decarburisation Effect on Hardened Strip Steel Fastening Components. Materials Science, 22 (1), 148−152. DOI: 10.5755/j01.ms.22.1.7467.
1.1.
2016
Sepper, S.; Peetsalu, P.; Kulu, P.; Saarna, M.; Mikli, V. (2016). The role of silicon in the hot dip galvanizing process. Proceedings of the Estonian Academy of Sciences, 65 (2), 159−165. DOI: 10.3176/proc.2016.2.11.
6.7.
2016
Taklaja, P.; Kiitam, I.; Peetsalu, P.; Antonov, M. (2016). Kaetud keskpinge õhuliinijuhtmete uuring [Analysis of Covered Conductors of Medium Voltage Overhead Lines]. Tallinn: TTÜ elektroenergeetika instituut.
1.1.
2015
Lind, L.; Peetsalu, P.; Sergejev, F. (2015). Wear of Different PVD Coatings at Industrial Fine-blanking Field Tests. Materials Science, 21 (3), 343−348. DOI: 10.5755/j01.ms.21.3.7249.
1.1.
2015
Lend, H.; Ratas, K.; Peetsalu, P. (2015). Measurement of Geometry of Small Axisymmetric Sheet Metal Component after Forming. International Journal of Material Forming, 21 (3), 473−478. DOI: 10.5755/j01.ms.21.3.7384.
1.1.
2015
Kulu, P.; Tarbe, R.; Saarna, M.; Surzenkov, A.; Peetsalu, P.; Talviste, K. (2015). Wear resistance and selection of steels, hardmetals and hardfacings for abrasive wear conditions. International Journal of Microstructure and Materials Properties, 10 (2), 101−113. DOI: 10.1504/IJMMP.2015.068718.
3.1.
2015
Veinthal, R.; Peetsalu, P.; Saarna, M.; Sergejev, F. (2015). Punch lifetime in fine-blanking with optimum combination of mechanical properties. In: Proceedings - European Conference on Heat Treatment and 22st IFHTSE Congress (1−7). . Venice, Italy: Associazione Italiana di Metallurgia (AIM).
6.7.
2015
Taklaja, P.; Kiitam, I.; Peetsalu, P.; Saarna, M.; Kurissoo, L. (2015). Vananevate juhtmete füüsikalised omadused [The physical characteristics of aging overhead line conductors]. Tallinn: TTÜ elektroenergeetika instituut.
3.1.
2014
Aruniit, A.; Kers, J.; Krumme, A.; Peetsalu, P. (2014). Particle size and proportion influence to impact properties of particulate polymer composite. Proceedings of the 9th International Conference of DAAAM Baltic Industrial Engineering : 24-26st April 2014, Tallinn, Estonia: 9th international conference of DAAAM Baltic industrial engineering; April 24 -26, 2014; Tallinn, Estonia. TUT, 325−330.
3.1.
2014
Sergejev, F.; Lind, L.; Antonov, M.; Peetsalu, P.; Adoberg, E. (2014). Contact behavior of the hard thin ceramic coatings under cyclic loading. 5th World Tribology Congress, WTC 2013, 3. Politecnico di Torino (DIMEAS), 2193−2196.
3.2.
2014
Kulu, P.; Tarbe, R.; Saarna, M.; Surzenkov, A.; Peetsalu, P.; Viljus, M. (2014). Steels, hardmetals and hardfacings for abrasive wear applications. European Conference on Heat Treatment and 21st IFHTSE Congress, Munich, Germany, 12-15 May 2014. IFHTSE , 449−456.
3.4.
2014
Veinthal, R.; Peetsalu, P.; Saarna, M.; Talkop, A. (2014). Durability of Complex Shape Punch in Thick Sheet Metal Fine-blanking. Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress, May 12th-15th, Munich, Germany. Ed. H-W. Zoch, R. Schneider, T. Lübben. Munich, Germany: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V (AWT); www.awt-online.org, 399−406.
1.2.
2012
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Mikli, V.; Lind, L.; Beilmann, J. (2012). Influence of Steel Austenitization to Part Quality in Continuous Austempering. Estonian Journal of Engineering, 18 (3), 221−231.
1.2.
2012
Adoberg, E.; Podgurski, V.; Peetsalu, P.; Lind, L.; Mikli, V.; Hvizdos, P.; Kulu, P. (2012). The Effect of Surface Pre-Treatment and Coating Post-Treatment to the Properties of TiN Coating. Estonian Journal of Engineering, 18 (3), 185−192.
3.1.
2012
Sepper, S.; Peetsalu, P.; Mikli, V.; Saarna, M. (2012). The effect of substrate microstructure on morphology of zinc coatings. Proceedings of the 8th International Conference od DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 2: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 april 2012. Ed. Otto, T. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 717−722.
3.4.
2012
Sepper, S.; Peetsalu, P.; Saarna, M.; Kirs, V.; Mikli, V. (2012). High strength steel behaviour during hot dip galvanizing. Proceedings 20th IFHTSE: International Federation for Heat Treatment and Surface Engineering Congress, Beijing, China, October 23-25, 2012. Chinese Heat Treatment Society, 525−529.
1.1.
2011
Sergejev, F.; Peetsalu, P.; Sivitski, A.; Saarna, M.; Adoberg, E.. (2011). Surface fatigue and wear of PVD coated punches during fine blanking operation. Engineering Failure Analysis, 18 (7), 1689−1697. DOI: 10.1016/j.engfailanal.2011.02.011.
1.2.
2011
Križan, P.; Matúš, M.; Šooš, L.; Kers, J.; Peetsalu, P.; Kask, Ü.; Menind, A. (2011). Briquetting of municipal wastes by different technologies for quality and properties evaluation. Agronomy Research, 19, 115−123.
1.2.
2011
Sepper, S.; Peetsalu, P.; Saarna, M. (2011). Methods to evaluate the appearance of hot dip galvanized coatings. Agronomy Research, 9, 229−236.
3.1.
2011
Laurmaa, V.; Kers, J.; Tall, K.; Mikli, V.; Goljandin, D.; Vilsaar, K.; Peetsalu, P.; Saarna, M.; Tarbe, R.; Zhang, L. (2011). Mechanical recycling of electronic wastes for materials recovery. In: Zhang, L.; Krumdick, G.K. (Ed.). Recycling of Electronic Waste II: Proceedings of the Second Symposium (3−10). . Hoboken, New Jersey, USA: John Wiley & Sons Ltd.
5.2.
2011
Kers, J.; Saarna, M.; Peetsalu, P.; Aruniit, A.; Majak, J.; Pohlak, M.; Herranen, H. (2011). Selection of parameters in adhesive bonding of composite structures. 20th International Baltic Conference, Materials Engineering 2011, Book of Abstracts: 20th International Baltic Conference, Materials Engineering, Kaunas, Lihtuania, October 27-28. Kaunas, Lithuania: Kaunas University of Technology Press, 53−53.
1.2.
2010
Peetsalu, P.; Resev, J.; Ruus, A.; Menind, A.; Kers, J.; Sepper, S.; Olt, J. (2010). Preliminary investigation into mechanical properties of clay reinforced with natural fibres. Agronomy Research, 8, 201−207.
1.2.
2010
Kers, J.; Peetsalu, P.; Saarna, M.; Viikna, A.; Krumme, A.; Menind, A. (2010). Preliminary investigation into tensile characteristics of long flax fibre reinforced composite material. Agronomy Research, 8, 107−114.
3.1.
2010
Lind, L.; Peetsalu, P.; Põdra, P.; Adoberg, E.; Veinthal, R.; Kulu, P. (2010). Description of Punch Wear Mechanism During Fine Blanking Process. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, 2: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn: Tallinn University of Technology Press, 504−509.
3.2.
2010
Peetsalu, P.; Saarna, M.; Adoberg, E.; Kulper, E.; Lind, L.; Kulu, P. (2010). Evaluation of punch wear resistance during industrial test. Acta Metallurgica Slovaca Conference, 1: 14th International Symposium on Metallography, 28-30 April 2010, Starà Lesnà, Slovak Republic. , 105−110.
5.2.
2010
Adoberg, E.; Surženkov, A.; Podgurski, V.; Peetsalu, P.; Kulu, P. (2010). Pre- and posttreatment effect to the surface properties of thin hard coatings. Proceedings of the XIX-th International Baltic Conference "Materials Engineering & Balttrib-2010": 19th International Conference "Materials Engineering & Balttrib-2010", Riga, Latvia, 28-29 October 2010. Ed. J. Grabis, J. Krastins. Riga, Latvia: Riga Technical University, 44.
3.1.
2009
Peetsalu, P.; Mikli, V.; Ratas, K.; Kulper, E.; Jaason, K. (2009). Bainitic Structure Effect on Hydrogen Embrittlement. Proceedings of the 17th IFHTSE Congress: 17th IFHTSE Congress, Kobe, Japan; October 27-30, 2008. The Japan Society for Heat Treatment, 592−595. (Netsu Shori (Journal of the Japan Society for Heat Treatment); 49).
1.2.
2008
Mäll, Jaak; Peetsalu, Priidu (2008). Kodasoo raudkübar. Metallograafiliste uuringute tulemusi [Medieval Kettlehat from Kodasoo. A Metallographic Study]. Leimus, Ivar (Toim.). Räägime asjast (7−15).. Tallinn: Eesti Ajaloomuuseum. (Varia Historica; III).
3.1.
2008
Zhang, L.; Zuo, Xi.n; Kers, J.; Peetsalu, P.; Xu, S. (2008). Recycling of electronic wastes: Degradation and combustion. EPD Congress 2008 held at the 2008 Annual TMS Meeting and Exhibition. Ed. Howard, S.M . Minerals, Metals & Materials Society, 491−496.
3.1.
2008
Zhang, L.; Zuo, X.; Kers, J.; Goljandin, D.; Peetsalu, P. (2008). Mechanical and Pyrometallurgical Recycling of Electronic Wastes. REWAS 2008 (Global Symposium on Recycling, Waste Treatment and Clean Technology), Cancun, Mehhiko, 12-15.10.2008. Ed. B. Mishra, C. Ludwig, S. Das. Mehhiko: TMS (The Minerals, Metals & Materials Society), 699−708.
3.1.
2008
Saarna, M., Peetsalu, P. (2008). Effect of mean stress on fatigue strength of duplex steels in synthetic white water environment. In: Küttner, R. (Ed.). Proceedings of the 6th international conference of DAAAM Baltic industrial engineering, 24-26th april 2008, Tallinn, Estonia (531−536). . Tallinn: Tallinn University of Technology.
1.1.
2007
Zimakov, S.; Goljandin, D.; Peetsalu, P.; Kulu, P. (2007). Metallic powders produced by the disintegrator technology. International Journal of Materials and Product Technology, 28, 226−251.
1.2.
2007
Peetsalu, P.; Saarna, M.; .Mikli, V.; Juurma, M. (2007). Computer Based Steel Microstructure Analysis Describing the Size and Distribution of Structure Phases. Acta Metallurgica Slovaca, 13, 91−95.
2.3.
2007
Peetsalu, P. (2007). Mikrostructural aspects of thermal sprayed WC-Co coatings and NiI-Cr coated steels. (Doktoritöö, Tallinna Tehnikaülikool). Tallinn: Tallinn University of Technology Press.
3.4.
2007
Peetsalu, P.; Saarna, M.; Mikli, V. (2007). Assesment of Non-metallic Inclusions in Sheet Metals by Computer Analysis. Proceedings of the Seventh Inernational Conference on Clean Steel: sevent international conference Clean Steel, Hungary 2007. Balatonfüred, Hungary: Hungarian Mining and Metallurgical society (OMBKE), 332−341.
1.2.
2006
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterizationa of WC-CO thermal spray coatings based on the composite powders. Powder Metallurgy Progress, 6 (1), 34−41.
1.2.
2006
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterization of WC-Co composite thermal spray powder and coating. Proceedings of the Estonian Academy of Sciences. Engineering, 12 (4), 435−444.
3.1.
2006
Tarbe, R.; Zimakov, S.; Peetsalu, P.; Kulu, P.; Mikli, V. (2006). Experimental Spray Powders and Coatings Produced from Recycled Hardmetal by Various Mechanical Methods. Euro PM2006 Congress & Exhibition Proceedings, Hard Materials, 1: Euro PM2006, Ghent, Belgium, 23-25 October 2006. Ed. European Powder Metallurgy Association. European Powder Metallurgy Association, 259−264.
3.4.
2006
Zimakov, S.; Peetsalu, P.; Pirso, J.; Kulu, P.; Mikli, V. (2006). Thermal spray coatings from WC-Co powders produced by mechanically activated synthesis. Thermal Spray 2006: Building on 100 Years of Success + Proceedings of International Thermal Spray Conference (ITSC) & Exposition, 15-18 May 2006, Seattle, USA [CD-ROM]: International Thermal Spray Conference (ITSC) & Exposition, 15-18 May 2006, Seattle, USA. Ed. Marple, B.R.; Hyland, M.M.; Lau, Y.-C.; Lima, R.S.; Voyer, J. Asm International.
5.2.
2006
Peetsalu, P.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2006). Characterization of WC-Co composite thermal spray powder and coating. Proceedings of 15th International Baltic Conference Engineering Materials & Tribology : BALTMATTRIB 2006: The 15th International Baltic Conference Engineering Materials & Tribology, BALTMATTRIB 2006, Tallinn, Estonia, 5-6 Oct. 2006. , 52−53.
1.2.
2005
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.;Kulu, P. (2005). Technology and characterization of composite thermal spray powders. Materials Science, 11 (4), 385−389.
3.1.
2005
Peetsalu, P.; Zimakov, S.; Pirso, J.; Mikli, V.; Tarbe, R.; Kulu, P. (2005). Characterization of Composite Thermal Spray Powders. Euro PM2005 Powder Metallurgy Congress & Exhibition : Proceedings: Euro PM2005 Powder Metallurgy Congress & Exhibition, Prague Congress Centre, Czech Republic 2 - 5 Oct. 2005. EPMA, 87−92.
3.4.
2005
"Zimakov, Sergei;Kulu, Priit;Goljandin, Dmitri;Peetsalu, Priidu" (2005). Microstructured cermet powders for HVOF spraying. Proceedings of Jurmala International Conference Welding and Powder Metallurgy : April 28-29, Jurmala, Latvia. Jurmala: TTY puuduv kirjastus, ? p. [CD-ROM]−? p. [CD-ROM].
5.2.
2005
Kulu, P.; Zimakov, S.; Podgurski, V.; Peetsalu, P.; Tarbe, R. (2005). Nanopowders and nanostructured coatings. In: Nanopowders, Nanostructured Materials and Coatings : Network for Nanostructured Materials of ACC : March 17, 2005, Tallinn, Estonia : book of abstracts (8). . Tallinn: Tallinna Tehnikaülikooli Kirjastus.
5.2.
2005
Tarbe, R.; Peetsalu, P.; Zimakov, S.; Kulu, P. (2005). Spray powders and coatings produced from used hardmetal by various mechanical methods. Abstracts of Papers of 14th International Baltic conference: Materials Engineering - 2005. Kaunas (Lithuania), October 6 - 7. Kaunas: Kauno technologijos universitetas, 39.
1.2.
2004
Mikli, V.; Kulu, P.; Tarbe, R.; Peetsalu, P.; Zimakov, S. (2004). Recycled hardmetal based powders for thermal spray. Proceedings of the Estonian Academy of Sciences. Engineering, 10 (4), 315−325.
3.4.
2004
Kulu, P.; Goljandin, D.; Peetsalu, P. (2004). Metal powders produced by mechanical methods. Proceedings of PM2004 Powder Metallurgy World Congress, Vienna, Austria, 1: PM2004 Powder Metallurgy World Congress, Wien, October 17-21 2004. EPMA, 157−162.
3.4.
2004
"Kulu, Priit;Goljandin, Dmitri;Peetsalu, Priidu" (2004). Metal powders produced by mechanical methods. (58−58). . TTY puuduv kirjastus.
3.4.
2004
Mikli, Valdek; Kulu, Priit; Tarbe, Riho; Peetsalu, Priidu (2004). Double-cemented recycled hardmetal based powders for thermal spray. Proceedings of the 4th International Conference "Industrial engineering - new challenges to SME" : 29-30th April 2004, Tallinn, Estonia, 211−214.
1.2.
2003
Peetsalu, P.; Goljandin, D.; Kulu, P.; Mikli, V.; Käerdi, H. (2003). Micropowders produced by disintegrator milling. Powder Metallurgy Progress, 3 (2), 99−110.
1.2.
2002
Kulu, P.; Zimakov, S.; Goljandin, D.; Peetsalu, P. (2002). Novel Thermal Spray Powders for Corrosion and Wear Resistant Coatings. Materials Science, 8 (4), 413−416.
3.4.
2002
Goljandin, D.; Kulu, P.; Peetsalu, P. (2002). Ultrafine metal powders produced by grinding from the industrial wastes. Proceedings of TMS2002 Extraction and Proceeding Division Meeting on Recycling and Waste Treatment in Mineral and Metal Processing: Technical and Economical Aspects, 1. , 277−284.
3.5.
2002
Kulu, P.; Zimakov, S.; Goljandin, D.; Peetsalu, P. (2002). Novell Thermally Sprayed Corrosion and Wear Resistant Coatings. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME" : 25-27 April 2002, Tallinn, Estonia: 3rd International Conference "Industrial Engineering - New Challenges to SME", Tallinn, Estonia, 25-27 April 2002. Tallinn: Tallinn Technical University, 169−172.
3.4.
2001
Kommel, L.; Peetsalu, P.; Veinthal, R. (2001). Evolution of Microstructure and Properties in Ti-alloys During Rapid Electrocontact Heating with SPD. Proceedings of the X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, 2001, September 27-28. Riga Technical University, 62−66.
20.12.2021