See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Liina Lind

https://etis.ee/CV/Liina_Lind/est
12.03.1985
+3725298371
+3726203353
liina.lind@taltech.ee
AAC-7616-2020

Teenistuskäik

Töökohad ja ametid
08.09.2020–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , vanemlektor (1,00)
01.03.2019–07.09.2020   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Assistent (0,50)
01.01.2017–28.02.2019   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Assistent (1,00)
01.09.2015–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Assistent (1,00)
01.09.2012–31.08.2015   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, nooremteadur (1,00)
01.04.2011–31.08.2012   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Assistent (0,50)
01.04.2010–31.03.2011   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Assistent (0,10)
01.09.2009–31.03.2010   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Assistent (0,50)
01.01.2008–31.12.2009   
Tehas Metallist AS, konstruktor (1.00)
01.01.2005–30.06.2008   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, insener (0,50)
 
 
Haridustee
2010–2011   
Aalto University School of Science and Technology, külalisüliõpilane
2009–2014   
Tallinna Tehnikaülikool, doktoriõpe, Tootearendus ja tootmistehnika (materjalitehnika)
2006–2009   
Tallinna Tehnikaülikool, magistriõpe, Tootearendus ja tootmistehnika
2003–2006   
Tallinna Tehnikaülikool, bakalaureuseõpe, Tootearendus ja tootmistehnika
2000–2003   
Tallinna Pirita Majandusgümnaasium
 
 
Lisainfo
Õppetegevuse aruanne:
Õppejõud järgnevates ainetes (TalTech, Mehaanika ja tööstustehnika instituut):
Materjalitehnika (MTX0010, eesti keeles);
Materials engineering (MTM0070, inglise keeles);
Metallide vormimistehnoloogiad (EMX0010, eesti keeles)

Olen seotud E-õppe keskkondade loomise ning haldamisega mitmes erinevas õppeaines.
MVEB kaitsmiskomisjoni liige.

Kvalifikatsioon

Teaduskraadid
Liina Lind, doktorikraad, 2014, (juh) Renno Veinthal; Priidu Peetsalu, Wear of PVD Coatings on Fineblanking Punches (PVD pinnete kulumine silelõikestantsi templitel), Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool.
Liina Lind, magistrikraad, 2009, (juh) Priidu Peetsalu, Lehtmaterjali läbikarastuvuse analüüs, Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut.
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS KLASSIFIKAATOR: T155 Pinded ja pinnatehnoloogia

Jooksvad projektid

Lõppenud projektid

Publikatsioonid

Klass
Aasta
Publikatsioon
 
1.1.
2020
Lille, H.; Ryabchikov, A.; Peetsalu, P.; Lind, L.; Sergejev, F.; Mikli, V.; Kübarsepp, J. (2020). Residual Stresses on Various PVD Hard Coatings on Tube and Plate Substrates. Coatings, 10 (11), 1054. DOI: 10.3390/coatings10111054.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Adoberg, Eron; Kurissoo, Liisa; Peetsalu, Priidu; Lind, Liina (2017). Evaluation of residual stresses in PVD coatings by means of the curvature method of plate. In: Dagnija Loca (Ed.). Engineering Materials and Tribology XXV (404−408). Trans Tech Publications Ltd. (Key Engineering Materials; 721).10.4028/www.scientific.net/KEM.721.404.
3.1.
2017
Saarna, M.; Lind, L.; Peetsalu, P.; Sergejev, F. (2017). Cyclic Loading of TiCN Coating by Vickers Indentation. In: D. Loca (Ed.). Engineering Materials and Tribology XXV (425−429). Baltmattrib 2016, Riia, 3-4 November. Trans Tech Publications Ltd : Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.425.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Adoberg, Eron; Lind, Liina; Kurissoo, Liisa; Peetsalu, Priidu (2017). Evaluation of residual stresses in PVD coatings by means of strip substrate length variation and curvature method of plate substrate. In: Regita Bendikienė, Kazimieras Juzėnas (Ed.). Materials Engineering 2017 (212−218). Trans Tech Publications Ltd. ( Solid State Phenomena).10.4028/www.scientific.net/SSP.267.212.
1.1.
2015
Lind, L.; Peetsalu, P.; Sergejev, F. (2015). Wear of Different PVD Coatings at Industrial Fine-blanking Field Tests. Materials Science, 21 (3), 343−348. DOI: 10.5755/j01.ms.21.3.7249.
2.3.
2014
Lind, L. (2014). Wear of PVD Coatings on Fineblanking Punches. (Tallinna Tehnikaülikool). TUT Press.
3.1.
2014
Lille, H.; Ryabchikov, A.; Lind, L.; Sergejev, F.; Adoberg, E.; Peetsalu, P. (2014). On determination of residual stresses in some PVD coatings by the curvature method. Proceedings of the 9th International Conference of DAAAM Baltic INDUSTRIAL ENGINEERING: 9th International DAAAM Baltic Conference, Tallinn, Estonia, 24-26 April 2014. Ed. T. Otto. Tallinn: Tallinn University of Technology, 378−382.
1.1.
2012
Costelle, L.; Lind, L.; Jalkanen, P.; Räisänen, M. T.; Nowak, R.; Räisänen, J. (2012). Conventional Nanoindentation in Self-Assembled Monolayers Deposited on Gold and Silver Substrates. Journal of Nanomaterials, 2012 (585123), 1−5.10.1155/2012/585123.
1.2.
2012
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Mikli, V.; Lind, L.; Beilmann, J. (2012). Influence of Steel Austenitization to Part Quality in Continuous Austempering. Estonian Journal of Engineering, 18 (3), 221−231.
1.2.
2012
Adoberg, E.; Podgurski, V.; Peetsalu, P.; Lind, L.; Mikli, V.; Hvizdos, P.; Kulu, P. (2012). The Effect of Surface Pre-Treatment and Coating Post-Treatment to the Properties of TiN Coating. Estonian Journal of Engineering, 18 (3), 185−192.
1.2.
2012
Lind, L.; Adoberg, E.; Aarik, L.; Kulu, P.; Veinthal, R.; Aal, A. A. (2012). Tribological properties of PVD coatings with lubricating films. Estonian Journal of Engineering, 18 (3), 193−201.
1.1.
2011
Costelle, L.; Jalkanen, P.; Räisänen, M.T.; Lind, L.; Nowak, R.; Räisänen, J. (2011). Mechanical response of nanometer thick self-assembled monolayers on metallic substrates using classical nanoindentation. Journal of Applied Physics, 110 (11), 114301-1−114301-4.10.1063/1.3663363.
5.2.
2011
Lind, L.; Costelle, L.; Jalkanen, P.; Räisänen, M.; Nowak, R.; Räisänen, J. (2011). Characterization of self-assembled monolayers by means of nanoindentation. Indentational Indentation Workshop 4: Abstract Book: International Indentation Workshop 4, Seoul National University, Seoul, Korea. 3-8 juuli 2011. Seoul National University, 106.
3.1.
2010
Lind, L.; Peetsalu, P.; Põdra, P.; Adoberg, E.; Veinthal, R.; Kulu, P. (2010). Description of Punch Wear Mechanism During Fine Blanking Process. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, 2: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn: Tallinn University of Technology Press, 504−509.
3.2.
2010
Peetsalu, P.; Saarna, M.; Adoberg, E.; Kulper, E.; Lind, L.; Kulu, P. (2010). Evaluation of punch wear resistance during industrial test. Acta Metallurgica Slovaca Conference, 1: 14th International Symposium on Metallography, 28-30 April 2010, Starà Lesnà, Slovak Republic. , 105−110.
13.11.2020

Liina Lind

https://etis.ee/CV/Liina_Lind/eng
12.03.1985
+3725298371
+3726203353
liina.lind@taltech.ee
AAC-7616-2020

Career

Institutions and positions
08.09.2020–...   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Senior Lecturer (1,00)
01.03.2019–07.09.2020   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Assistant (0,50)
01.01.2017–28.02.2019   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , teaching assistant (1,00)
01.09.2015–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , teaching assistant (1,00)
01.09.2012–31.08.2015   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, early-stage researcher (1,00)
01.04.2011–31.08.2012   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Assistant (0,50)
01.04.2010–31.03.2011   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Assistant (0,10)
01.09.2009–31.03.2010   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Assistant (0,50)
01.01.2008–31.12.2009   
Tehas Metallist AS, constructor (1.00)
01.01.2005–30.06.2008   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Other staff (0,50)
 
 
Education
2010–2011   
Aalto University School of Science and Technology, guest student
2009–2014   
Tallinn University of Technology, PhD studies, Product Development and Production Engineering
2006–2009   
Tallinn University of Technology, Master studies, Product Development and Production Engineering
2003–2006   
Tallinn University of Technology, Bachelor studies, Product Development and Production Engineering
2000–2003   
Pirita High School of Economics
 
 
Additional information
Study activity report:
Lecturer in the following subjects (TalTech, Institute of Mechanics and Industrial Engineering):
Materials Engineering (MTX0010, in Estonian);
Materials engineering (MTM0070, in English);
Metal forming technologies (EMX0010, in Estonian)

I am involved in creating and managing e-learning environments in several different subjects.
Member of the MVEB Defense Committee.

Qualifications

Academic degrees
Liina Lind, Doctor's Degree, 2014, (sup) Renno Veinthal; Priidu Peetsalu, Wear of PVD Coatings on Fineblanking Punches, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering Chair of Materials Science.
Liina Lind, Master's Degree, 2009, (sup) Priidu Peetsalu, Lehtmaterjali läbikarastuvuse analüüs (Through hardenability analysis of sheet metal), Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering.
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS CLASSIFICATION: T155 Coatings and surface treatment
 
 

Projects in progress

Completed projects

Publications

Category
Year
Publication
 
1.1.
2020
Lille, H.; Ryabchikov, A.; Peetsalu, P.; Lind, L.; Sergejev, F.; Mikli, V.; Kübarsepp, J. (2020). Residual Stresses on Various PVD Hard Coatings on Tube and Plate Substrates. Coatings, 10 (11), 1054. DOI: 10.3390/coatings10111054.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Adoberg, Eron; Kurissoo, Liisa; Peetsalu, Priidu; Lind, Liina (2017). Evaluation of residual stresses in PVD coatings by means of the curvature method of plate. In: Dagnija Loca (Ed.). Engineering Materials and Tribology XXV (404−408). Trans Tech Publications Ltd. (Key Engineering Materials; 721).10.4028/www.scientific.net/KEM.721.404.
3.1.
2017
Saarna, M.; Lind, L.; Peetsalu, P.; Sergejev, F. (2017). Cyclic Loading of TiCN Coating by Vickers Indentation. In: D. Loca (Ed.). Engineering Materials and Tribology XXV (425−429). Baltmattrib 2016, Riia, 3-4 November. Trans Tech Publications Ltd : Trans Tech Publications Ltd. (Key Engineering Materials; 721). DOI: 10.4028/www.scientific.net/KEM.721.425.
3.1.
2017
Lille, Harri; Ryabchikov, Alexander; Kõo, Jakub; Adoberg, Eron; Lind, Liina; Kurissoo, Liisa; Peetsalu, Priidu (2017). Evaluation of residual stresses in PVD coatings by means of strip substrate length variation and curvature method of plate substrate. In: Regita Bendikienė, Kazimieras Juzėnas (Ed.). Materials Engineering 2017 (212−218). Trans Tech Publications Ltd. ( Solid State Phenomena).10.4028/www.scientific.net/SSP.267.212.
1.1.
2015
Lind, L.; Peetsalu, P.; Sergejev, F. (2015). Wear of Different PVD Coatings at Industrial Fine-blanking Field Tests. Materials Science, 21 (3), 343−348. DOI: 10.5755/j01.ms.21.3.7249.
2.3.
2014
Lind, L. (2014). Wear of PVD Coatings on Fineblanking Punches [PVD pinnete kulumine silelõikestantsi templitel]. (Tallinna Tehnikaülikool). TUT Press.
3.1.
2014
Lille, H.; Ryabchikov, A.; Lind, L.; Sergejev, F.; Adoberg, E.; Peetsalu, P. (2014). On determination of residual stresses in some PVD coatings by the curvature method. Proceedings of the 9th International Conference of DAAAM Baltic INDUSTRIAL ENGINEERING: 9th International DAAAM Baltic Conference, Tallinn, Estonia, 24-26 April 2014. Ed. T. Otto. Tallinn: Tallinn University of Technology, 378−382.
1.1.
2012
Costelle, L.; Lind, L.; Jalkanen, P.; Räisänen, M. T.; Nowak, R.; Räisänen, J. (2012). Conventional Nanoindentation in Self-Assembled Monolayers Deposited on Gold and Silver Substrates. Journal of Nanomaterials, 2012 (585123), 1−5.10.1155/2012/585123.
1.2.
2012
Jaason, K.; Peetsalu, P.; Saarna, M.; Kulu, P.; Mikli, V.; Lind, L.; Beilmann, J. (2012). Influence of Steel Austenitization to Part Quality in Continuous Austempering. Estonian Journal of Engineering, 18 (3), 221−231.
1.2.
2012
Adoberg, E.; Podgurski, V.; Peetsalu, P.; Lind, L.; Mikli, V.; Hvizdos, P.; Kulu, P. (2012). The Effect of Surface Pre-Treatment and Coating Post-Treatment to the Properties of TiN Coating. Estonian Journal of Engineering, 18 (3), 185−192.
1.2.
2012
Lind, L.; Adoberg, E.; Aarik, L.; Kulu, P.; Veinthal, R.; Aal, A. A. (2012). Tribological properties of PVD coatings with lubricating films. Estonian Journal of Engineering, 18 (3), 193−201.
1.1.
2011
Costelle, L.; Jalkanen, P.; Räisänen, M.T.; Lind, L.; Nowak, R.; Räisänen, J. (2011). Mechanical response of nanometer thick self-assembled monolayers on metallic substrates using classical nanoindentation. Journal of Applied Physics, 110 (11), 114301-1−114301-4.10.1063/1.3663363.
5.2.
2011
Lind, L.; Costelle, L.; Jalkanen, P.; Räisänen, M.; Nowak, R.; Räisänen, J. (2011). Characterization of self-assembled monolayers by means of nanoindentation. Indentational Indentation Workshop 4: Abstract Book: International Indentation Workshop 4, Seoul National University, Seoul, Korea. 3-8 juuli 2011. Seoul National University, 106.
3.1.
2010
Lind, L.; Peetsalu, P.; Põdra, P.; Adoberg, E.; Veinthal, R.; Kulu, P. (2010). Description of Punch Wear Mechanism During Fine Blanking Process. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, 2: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn: Tallinn University of Technology Press, 504−509.
3.2.
2010
Peetsalu, P.; Saarna, M.; Adoberg, E.; Kulper, E.; Lind, L.; Kulu, P. (2010). Evaluation of punch wear resistance during industrial test. Acta Metallurgica Slovaca Conference, 1: 14th International Symposium on Metallography, 28-30 April 2010, Starà Lesnà, Slovak Republic. , 105−110.
13.11.2020