See veebileht kasutab küpsiseid kasutaja sessiooni andmete hoidmiseks. Veebilehe kasutamisega nõustute ETISe kasutustingimustega. Loe rohkem
Olen nõus

Renno Veinthal

https://etis.ee/CV/Renno_Veinthal/est
24.07.1976
3726203351
37253011414
renno.veinthal@taltech.ee

Teenistuskäik

Töökohad ja ametid
01.09.2021–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Materjali- ja keskkonnatehnoloogia instituut, direktor (1,00)
01.09.2020–...   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , Professor (1,00)
01.01.2017–31.08.2020   
Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut , (leping ajutiselt peatatud) (1,00)
01.09.2015–31.08.2020   
Tallinna Tehnikaülikool, teadusprorektor (1,00)
01.09.2007–31.12.2016   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Professor (1,00)
01.01.2006–31.08.2007   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Vanemteadur (0,50)
01.06.2004–31.08.2007   
Tallinna Tehnikaülikool, Katsekoda, juhataja (0,50)
1999–2005   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, Teadur (0,50)
1996–1999   
Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool, insener (0,50)
 
 
Haridustee
2001–2005   
TTÜ tootmistehnika õppesuund; tehnikateaduste doktor
1999–2001   
TTÜ tootmistehnika õppesuund, tehnikamagister;
1994–1999   
TTÜ tootmis- ja transporditehnika õppesuund, insener (viieaastane kraadieelõpe);
1986–1994   
Tallinna Kadrioru Keskkool
 
 
Teadusorganisatsiooniline ja -administratiivne tegevus
2016−...   
Keemilise ja bioloogilise füüsika instituudi nõukogu liige
2016−...   
Nutika spetsialiseerumise juhtkomitee liige
2016−...   
Toidu ja Fermentatsioonitehnoloogia Tehnoloogiaarenduskeskuse (TFTAK AS) nõukogu liige
2015−...   
Haridus ja teadusministrit nõustava teaduspoliitika komisjoni liige
2014−...   
H2020 ekspertrühma liige Nanotehnoloogia, materjalitehnoloogia,biotehnoloogia, arenenud tootmis-ja töötlemistehnoloogia grupis
Eesti Keevitusühing, liige
Eesti Materjalitehnika ühing, liige
2016−2016   
Eesti Teaduste Akadeemia uurija-professori valimiskomisjoni liige
2015−2016   
TTÜ kuratooriumi liige
2015−2015   
konverentsi Baltmattrib 2015 korralduskomitee liige
2015−2020   
Tallinna Tehnikaülikooli senati liige
2013−2013   
konverentsi Applied Magnetic Materials AMM 2012 juhtkomitee liige, 23-24.10.2013 Pori, Soome
2013−2013   
konverentsi NT13: The Fourteenth International Conferenceon the Science and Application of Nanotubes satelliitkonverentsi korraldaja
2012−2012   
konverentsi Baltmattrib 2012 korralduskomitee liige
2012−2012   
konverentsi 8 th International DAAAM Baltic Conference juhtkomitee liige
2009−2009   
konverentsi Baltmattrib 2009 korralduskomitee liige
2007−2015   
TTÜ materjalitehnika instituudi direktor
2001−2004   
TTÜ nõukogu teaduskomisjon, liige
2001−2004   
TTÜ nõukogu, liige (doktorantide esindaja)
 
 
Lisainfo
Top Management Programme läbimine 40. kohordi koosseisus (TMP40) 2017 a. TMP on akadeemiliste tippjuhtide ettevalmistamiseks ja arendamiseks välja töötatud Briti koolitusprogramm, mida korraldas Leadership Foundation (liitumiste tulemustena aastast 2018 Advance HE, www.advance-he.ac.uk)

Kvalifikatsioon

Teaduskraadid
Renno Veinthal, doktorikraad, 2005, (juh) Priit Kulu, Characterization and Modelling of Erosion Wear of Powder Composite Materials and Coatings (Pulberkomposiitmaterjalide ja –pinnete omadused ja erosioonkulumise modelleerimine), Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool.
 
 
Teaduspreemiad ja tunnustused
2020, Renno Veinthal, TTÜ teenetemedal "Mente et Manu"
2015, Renno Veinthal, Parim eestikeelne kõrgkooliõpik 2015 - „Materjalitehnika“ I-II osa, mille autorid on Priit Kulu, Jakob Kübarsepp, Andres Laansoo, Renno Veinthal https://digikogu.taltech.ee/et/Item/4ab40e78-b578-4dcc-aa3e-6516e8fa33c9 ISBN: ISBN 9789949237425
2012, Renno Veinthal, Parim noorteadlane TTÜ mehaanikateaduskonnas
1999, Renno Veinthal, Eesti teaduste Akadeemia 1999 a. lõputööde konkursi preemia diplomitöö "Materjalide ja toodete mittepurustav kontroll" eest
 
 
Teadustöö põhisuunad
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS KLASSIFIKAATOR: T155 Pinded ja pinnatehnoloogia
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS KLASSIFIKAATOR: T152 Komposiitmaterjalid
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; CERCS KLASSIFIKAATOR: T480 Muude toodete tehnoloogia; TÄPSUSTUS: magnetmaterjalid
ETIS KLASSIFIKAATOR: 4. Loodusteadused ja tehnika; 4.12. Protsessitehnoloogia ja materjaliteadus; TÄPSUSTUS: kulumiskindlad materjalid ja pinded, materjalide katsetamine

Lõppenud projektid

Juhendamisel väitekirjad

Juhendatud väitekirjad

Publikatsioonid

Klass
Aasta
Publikatsioon
 
6.6.
2020
Veinthal, R. (2020). Renno Veinthal: tehnikaülikooli teadustöö viljakus on suurenenud. err.ee.
6.6.
2020
Veinthal, R. (2020). Renno Veinthal: Eesti teevad nutikaks insenerid. Postimees.
1.1.
2019
Holovenko, Y; Kollo, L; Jõeleht, M; Ivanov, R; Soloviova, T; Veinthal, R; (2019). Production of metal–ceramic lattice structures by selective laser melting and carburizing or nitriding. Proceedings of the Estonian Academy of Sciences, 68 (2), 131−139. DOI: 10.3176/proc.2019.2.02.
1.1.
2019
Holovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, Renno (2019). Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites. International Journal of Refractory Metals and Hard Materials, 105087. DOI: 10.1016/j.ijrmhm.2019.105087.
6.6.
2019
Veinthal, R. (2019). Renno Veinthal: rohkem suurepärast teadust, arvestades Eesti vajadusi. err.ee.
3.1.
2018
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Soloviova, T.; Veinthal, R. (2018). Evaluation of titanium matrix composites with additions of 5 vol. % B4C and TiC processed via Selective Laser Melting. EuroPM 2018 proceedings: Euro PM2018 Congress & Exhibition, Bilbao, Spain, 14 - 18 October 2018. European Powder Metallurgy Association (EPMA).
6.6.
2018
Veinthal, R. (2018). Kuidas suurendada teaduse ja majanduse kokkupuudet? Personaliuudised. 21.08.2018.
1.1.
2017
Mural, Z.; Kollo, L.; Xia, M.; Bahl, C. R. H.; Bech Abrahamsen, A.; Neves Bez, H.; Link, J.; Veinthal, R. (2017). The effect of nano-TiC addition on sintered Nd-Fe-B permanent magnets. Journal of Magnetism and Magnetic Materials, 429, 23−28. DOI: 10.1016/j.jmmm.2016.12.115.
6.6.
2017
Veinthal, R. (2017). Renno Veinthal: digipööre ja 10 «eluaegset» ametikohta TTÜs. Postimees. 20.04.2017.
1.1.
2016
Yung, D.-L.; Antonov, M.; Veinthal, R.; Hussainova, I. (2016). Wear behaviour of doped WC-Ni based hardmetals tested by four methods. Wear, 352-353, 171−179. DOI: 10.1016/j.wear.2016.02.015.
1.1.
2016
Mural, Z.; Kolnes, M.; Afshari, H.; Kollo, L.; Link, J.; Veinthal, R. (2016). Fabrication and microstructural analysis of Didymium-Fe-B magnet alloys with Ce additions. Proceedings of the Estonian Academy of Sciences, 65 (2), 166−171.
3.1.
2016
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Pohlak, M.; Veinthal, R. (2016). Effect of Hot Isostatic Pressing on Cellular Lattice Structures Obtained by Selective Laser Melting. World PM2016 proceedings: World PM2016 Congress & Exhibition, Hamburg, Germany, 9-13 October 2016. European Powder Metallurgy Association, USB.
3.2.
2016
Mural, Z., Kollo, L., Veinthal, R. (2016). Spark Plasma Sintered Nd-Fe-B Magnets from High-Energy Ball Milled Powders. The 24th International Workshop on Rare-Earth and Future Permanent Magnets and Their Applications (REPM 16), Darmstadt, Germany, 28.08-01.09.2016. Darmstadt, Germany: Technical University of Darmstadt and Fraunhofer IWKS, 619−623.
6.6.
2016
Soomere, Tarmo; Veinthal, Renno (2016). Akadeemiline sullerlus kui akadeemilise vabaduse kuritarvitamine. Sirp, nr 6, 12. veebruar, 36−37.
6.6.
2016
Aaviksoo, J.; Veinthal, R. (2016). Tenuur kui akadeemilise vabaduse tagatis. Sirp. 23.09.2019.
1.1.
2015
Antonov, M.; Veinthal, R.; Yung, D-L.; Katušin, D.; Hussainova, I. (2015). Mapping of impact-abrasive wear performance of WC–Co cemented carbides. Wear, 332-333, 971−978. DOI: 10.1016/j.wear.2015.02.031.
1.1.
2015
Rummo, H.; Veinthal, R.; Aruniit, A. (2015). Pultruding of Metal Powder Filled Glass Fiber Reinforced Polymer Composites. In: I. Hussainova, R. Veinthal (Ed.). Engineering Materials and Tribology (48−53). Trans Tech Publications Ltd. (Key Engineering Materials; 674). DOI: 10.4028/www.scientific.net/KEM.674.48.
2.4.
2015
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Veinthal, R. (2015). Materjalitehnika : õpik kõrgkoolidele. II, Konstruktsioonimaterjalide tehnologia. Tallinn: TTÜ kirjastus.
2.4.
2015
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Veinthal, R. (2015). Materjalitehnika : õpik kõrgkoolidele. I, Tehnomaterjalid. Tallinn: TTÜ kirjastus.
3.1.
2015
Pramono, A.; Kollo, L.; Kallip, K.; Veinthal, R.; Gomon, J.-K. (2015). Heat Treatment of Ultrafine Grained AA6061 Consolidation by Equal Channel Angular Pressing. In: Khairurrijal, K. T., Hidayat, S. N. (Ed.). Instrumentation and Measurement Systems (252−256). . Trans Tech Publications Ltd. (Applied Mechanics and Materials; 771). DOI: 10.4028/www.scientific.net/AMM.771.252.
3.1.
2015
Kommel, L.; Tarraste, M.; Kolnes, M.; Veinthal, R.; Kübarsepp, J. (2015).
 . Euro PM2015 Proceedings: Euro PM2015 Congress & Exibition - Heads to Reims, Champagne, France. Ed. EPMA. Reims, France: European Powder Metallurgy Association, x−x.
3.1.
2015
Veinthal, R.; Peetsalu, P.; Saarna, M.; Sergejev, F. (2015). Punch lifetime in fine-blanking with optimum combination of mechanical properties. In: Proceedings - European Conference on Heat Treatment and 22st IFHTSE Congress (1−7). . Venice, Italy: Associazione Italiana di Metallurgia (AIM).
3.1.
2015
Pramono, A.; Kollo, L.; Veinthal, R. (2015). Aluminum based composite by Novelty Process: Repetitive Press Roll Bonding (RPRB). In: S. Tursiloadi, M. Hanafi, Y. Sudiyani (Ed.). Procedia Chemistry: International Symposium on Applied Chemistry 2015 (473−479). Elsevier. (16). DOI: 10.1016/j.proche.2015.12.081.
3.4.
2015
Yung, D.; Antonov, M.; Hussainova, I.; Veinthal, R.; Hogmark, S. (2015). COMPOSITION AND STRUCTURE OF BIMODAL WC-Co MATERIALS RELATED TO MECHANICAL PROPERTIES AND ABRASIVE WEAR. 6th International Conference Mechanics and Materials in Design. Ed. J.F. Silva Gomes, Shaker A. Meguid., 253−255.
6.3.
2015
Pohlak, M.; Veinthal, R. (2015). Metallobjektide 3D printimine – uued võimalused ja väljakutsed. (2−3). .
6.3.
2015
Jõeleht, M.; Kollo, L.; Pohlak, M.; Veinthal, R. (2015). Uued võimalused 3D-printimise valdkonnas- metallide printimine peagi võimalik ka Eestis. (32−35). .
1.1.
2014
Kulu, P.; Käerdi, H.; Surzenkov, A.; Tarbe, R.; Veinthal, R.; Goljandin, D.; Zikin, A. (2014). Recycled hardmetal-based powder composite coatings: optimisation of composition, structure and properties. International Journal of Materials and Product Technology, 49, 180−202. DOI: 10.1504/IJMPT.2014.064038.
3.1.
2014
Taaber, Triinu; Põhako-Esko, Kaija; Joost, Urmas; Külasalu, Kadi; Antsov, Mikk; Antonov, Maksim; Veinthal, Renno; Saal, Kristjan; Lõhmus, Rünno; Mäeorg, Uno. (2014). Covalent coupling of ionic liquid to carbon nanotubes: preparation and tribological properties. MRS Proceedings "Semiconductor Nanowires—Synthesis, Properties and Applications", 1707: MRS Spring Meeting, San Francisco, California, April, 2014. Ed. Yong Zhu. Materials Research Society, UU06−30. DOI: 10.1557/opl.2014.539.
3.1.
2014
Pramono, A.; Kollo, L.; Veinthal, R.; Kallip, K.; Gomon, J.-K. (2014). Heat Treatment of Ultrafine Grained High-Strength Aluminum Alloy. D. Loca (Toim.). Engineering Materials & Tribology XXII (273−276). . Trans Tech Publications Ltd. (Key Engineering Materials; 604). DOI: 10.4028/www.scientific.net/KEM.604.273.
3.1.
2014
Mural, Z.; Kollo, L.; Traksmaa, R.; Kallip, K.; Link, J.; Veinthal, R. (2014). Structure and Magnetic Properties of NdFeB Powder Prepared by Hydrogen Decrepitation and High-energy Ball Milling. In: D. Loca (Ed.). Engineering Materials & Tribology XXII (262−268). . Trans Tech Publications Ltd. (Key Engineering Materials; 604).
3.1.
2014
Lille, H.; Kõo, J.; Valgur, J.; Ryabchikov, A.; Reitsnik, R.; Veinthal, R. (2014). Measurement of residual stresses in the cold-rolled Fe-Ni-Mn/Invar thermo-bimetallic plate. In: Materials Science Forum (101−106). Trans Tech Publications Ltd.
3.4.
2014
Fridrici, V.; Antonov, M.; Dubujet, P.; Taboulet, A.; Marou-Alzouma, O.; Katushin, D.; Yung, D.-L.; Méité, M.; Chaze, M., Kapsa, P.; Veinthal, R.; Hussainova, I.; Camus, T. (2014). NeTTUN project: how to increase the lifetime of TBM drag bits? 2nd Eastern European Tunnelling Conference (EETC2014), Athens, September 28 – October 1, 2014. Ed. I. Bakogiannis.
3.4.
2014
Pramono, A.; Kollo, L.; Kallip, K.; Veinthal, R.; Gomon, JK. (2014). Processing Nano Powder Aluminum by Equal Channel Angular Pressing. PROCEEDING Indonesian Student Scientific Conference “Toward Sustainability and Quality of Life, 66−76.
3.4.
2014
Veinthal, R.; Peetsalu, P.; Saarna, M.; Talkop, A. (2014). Durability of Complex Shape Punch in Thick Sheet Metal Fine-blanking. Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress, May 12th-15th, Munich, Germany. Ed. H-W. Zoch, R. Schneider, T. Lübben. Munich, Germany: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V (AWT); www.awt-online.org, 399−406.
3.4.
2014
Mural, Z.; Kollo, L.; Veinthal, R. (2014). Jet Milling of the Powders for the Nd-Fe-B Sintered Magnets. 2014 International Conference on NdFeB Magnets: Supply Chain, Critical Properties & Applications: 2014 International Conference on NdFeB Magnets: Supply Chain, Critical Properties & Applications, Ningbo, China, 02-05.03.2014. Ed. S. Gu; C. H. Chen. Ningbo, China, 181−183.
1.1.
2013
Veinthal, R.; Sergejev, F.; Zikin, A.; Tarbe, R.; Hornung, J. (2013). Abrasive impact wear and surface fatigue wear behaviour of Fe-Cr-C PTA overlays. Wear, 301, 102−108. DOI: 10.1016/j.wear.2013.01.077.
1.1.
2013
Antonov, M.; Veinthal, R.; Huttunen-Saarivirta, E.; Hussainova, I.; Vallikivi, A.; Lelis, M.; Priss, J. (2013). Effect of oxidation on erosive wear behaviour of boiler steels. Tribology International, 68, 35−44. DOI: 10.1016/j.triboint.2012.09.011.
3.1.
2013
Lille, H.; Kõo, J.; Ryabchikov, A.; Reitsnik, R.; Veinthal, R.; Mikli, V.; Sergejev, F. (2013). Investigation of residual stresses and some elastic properties of brush-plated gold and silver coatings. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (125−130). Trans Tech Publications Ltd. (Key Engineering Materials; 527). DOI: 10.4028/www.scientific.net/KEM.527.125.
3.4.
2013
Mural, Z.; Kollo, L.; Kallip, K.; Traksmaa, R.; Veinthal, R. (2013). High-energy ball milling of Nd-Fe-B powders. Applied Magnetic Materials 2013, Pori, Finland, 24.-25.10.2013. Tampere University of Technology.
1.1.
2012
Lille, H.; Kõo, J.; Ryabchikov, A.; Veinthal, R.; Mikli, V.; Sergejev, F. (2012). Determination of modulus of elasticity, nanohardness and residual stresses in brush-plated gold and silver coatings on copper substrate. Materials Science, 18 (1), 51−56.
1.1.
2012
Šin, P.; Veinthal, R.; Sergejev, F.; Antonov, M.; Stubna, I. (2012). Fracture Toughness of Ceramics Fired at Different Temperatures. Materials Science, 18 (1), 90−93. DOI: 10.5755/j01.ms.18.1.1349.
1.1.
2012
Antonov, M.; Hussainova, I.; Veinthal, R.; Pirso, J. (2012). Effect of temperature and load on three-body abrasion of cermets and steel. Tribology International, 46 (1), 261−268. DOI: 10.1016/j.triboint.2011.06.029.
1.2.
2012
Huttunen-Saarivirta, E.; Kuokkala, V.-T.; Antonov, M.; Veinthal, R.; Tuiremo, J.; Mäkela, K. (2012). Erosion-Oxidation of Pressure Vessel Steel P265GH. Finnish Journal of Tribology, 31, 11−19.
1.2.
2012
Talalaev, R.; Veinthal, R.; Laansoo, A.; Sarkans, M. (2012). Cold Metal Transfer (CMT) Welding of thin Sheet Metal Products. Estonian Journal of Engineering, 18 (3), 243−250.
1.2.
2012
Veinthal, R.; Kulu, P.; Žikin, A.; Sarjas, H.; Antonov, M.; Podgurski, V.; Adoberg, E. (2012). Coatings and surface engineering. Industry oriented research. Estonian Journal of Engineering, 18 (3), 176−184. DOI: 10.3176/eng.2012.3.02.
1.2.
2012
Lind, L.; Adoberg, E.; Aarik, L.; Kulu, P.; Veinthal, R.; Aal, A. A. (2012). Tribological properties of PVD coatings with lubricating films. Estonian Journal of Engineering, 18 (3), 193−201.
3.1.
2012
Talalaev, R.; Sarkans, M.; Laansoo, A.; Veinthal, R. (2012). Methodology for Configuration of Robot Welding Cell for SMEs Under Conditions of Small and Medium Sized Production Using MIG/MAG Process. Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 2: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 April 2012. Ed. T. Otto. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 591−596.
3.1.
2012
Lille, H.; Ryabchikov, A.; Kõo, J.; Reitsnik, R.; Veinthal, R.; Mikli, V.; Sergejev, F. (2012). Comparison of values of residual stresses determined by various methods in hard nickel coatings prepared by brush-plating in sulfate solution. Proceedings of the 8th International Conference of DAAAM Baltic, Industrial Engineering: 8th International DAAAM Baltic Conference, Tallinn, Estonia, 19-21 April 2012. Ed. T. Otto. Tallinn: Tallinn University of Technology, 680−687.
6.2.
2012
Herranen, H.; Karjust, K.; Kers, J.; Krustok, J.; Kulu, P.; Käerdi, H.; Laansoo, A.; Lend, H.; Otto, T.; Põdra, P.; Riives, J.; Saarna, M.; Sergejev, F.; Tiidemann, T.; Veinthal, R. (tõlkijad) (2012). Mehhanotehnika ja metallide käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.7.
2012
Herranen, H.; Karjust, K.; Kers, J.; Krustok, J.; Kulu, P.; Käerdi, H.; Laansoo, A.; Lend, H.; Otto, T.; Põdra, P.; Riives, J.; Saarna, M.; Sergejev, F.; Tiidemann, T.; Veinthal, R. [tõlkijad] (2012). Mehaanikainseneri käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2011
Kollo, L.; Bradbury, C.; Veinthal, R.; Jäggi, C.; Carreño-Morelli, E.; Leparoux, M. (2011). Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidation. Materials Science and Engineering A, 528 (21), 6606−6615. DOI: 10.1016/j.msea.2011.05.037.
1.1.
2011
Veinthal, R.; Kulu, P.; Käerdi, H. (2011). Microstructural aspects of abrasive wear of composite powder materials and coatings. International Journal of Materials and Product Technology, 40, 92−119. DOI: 10.1504/IJMPT.2011.037208.
1.2.
2011
Veinthal, R.; Sergejev, F.; Yaldiz, C. E.; Mikli, V. (2011). Impact Wear Performance of Thin Hard Coatings on TiC Cermets. Journal of ASTM International, 8 (7), 10 pp. DOI: 10.1520/JAI103272.
3.1.
2011
Ryabchikov, Alexander; Lille, Harri; Toropov, Stanislav; Kõo, Jakub; Pihl, Toomas; Veinthal, Renno (2011). Determination of residual stresses in thermal and cold sprayed coatings by the hole-drilling method. Materials Science Forum, 681, 171−176.
3.2.
2011
Antonov, M.; Hussainova, I.; Kers, J.; Kulu, P.; Kübarsepp, J.; Veinthal, R. (2011). Advanced multifunctional materials and their applications. In: Research in Estonia. Present and Future. (146−167). . Estonian Academy of Sciences.
3.2.
2011
Šin, P.; Veinthal, R.; Sergejev, F.; Antonov, M.; Stubna, I. (2011). Vickers hardness of ceramics fired at different temperatures. PhD Students, Young Scientists and Pedagogues Conference Proceedings, 473: 12th International scientific conference of PhD. students, young scientists and pedagogues; Nitra, Slovakia; 21-22 September 2011. Ed. Mgr. David Turčáni. Edícia Prírodovedec, 565−570.
3.2.
2011
Veinthal, R.; Antonov, M. (2011). Effect of Temperature on Erosive and Abrasive Wear of Carbide Reinforced Powder Steels. Tribology 2011: Tenth International Tribology Conference of the South American Institute of Tribology, Pretoria, South Africa, April 5-7. Ed. PL de Vaal, G. Fuller. American Institute of Tribology, 104−111.
6.2.
2011
Kers, J.; Veinthal, R. (2011). Komposiitmaterjalide töötlemine. Uuenduslik tootmine (257−283). . Tallinna Tehnikaülikooli Kirjastus.
6.2.
2011
Karjust, K.; Kers, J.; Kiolein, I.; Kokla, M.; Küttner, R.; Lavin, J.; Lavrentjev, J.; Lumiste, R.; Lõun, K.; Mõtus, L.; Naams, I.; Otto, T.; Pohlak, M.; Raba, K.; Riives, J.; Reedik, V.; Roosimölder, L.; Saks, A.; Talkop, A.; Tähemaa, T. ... Veinthal, R. (2011). Uuenduslik tootmine : käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
3.1.
2010
Lind, L.; Peetsalu, P.; Põdra, P.; Adoberg, E.; Veinthal, R.; Kulu, P. (2010). Description of Punch Wear Mechanism During Fine Blanking Process. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, 2: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn: Tallinn University of Technology Press, 504−509.
3.1.
2010
Lille, H.; Kõo, J.; Ryabchikov, A.; Toropov, S.; Veinthal, R.; Surzhenkov, A. (2010). Comparative analysis of residual stresses in flame-sprayed and electrodeposited coatings using substrate deformation and hole-drilling methods. Proceedings of the 7th International Conference of DAAAM Baltic, Industrial Engineering: 7th International Conference of DAAAM Baltic, Industrial Engineering, Tallinn, Estonia, April 22-24, 2010. Ed. R. Kyttner. Tallinn: Tallinn University of Technology, 474−479.
3.4.
2010
Veinthal, R.; Sergejev, F.; Yaldiz, C. E.; Mikli, V. (2010). Impact Wear Performance of Thin Hard Coatings on TiC Cermets. 18th Congress IFHTSE International Federation for Heat Treatment and Surface Engineering 18th Congress, July 26th - 30th, 2010 – Rio de Janeiro. Ed. Karlheinz Pohlmann, Nelson Guedes de Alcantara. Rio de Janeiro.
5.2.
2010
Surzhenkov, A.; Podgurski, V.; Viljus, M.; Adoberg, E.; Nanits, M.; Kulu, P.; Veinthal, R. (2010). Influence of drag finishing to dry sliding wear behaviour of PVD nanocomposite NaCo(R) coating during running-in. Proceedings of the XIX-th International Baltic Conference "Materials Engineering & Balttrib-2010": 19th International Baltic Conference "Materials Engineering & Balttrib-2010". Ed. J. Grabis, J. Krastins. Riga Technical University, 26.
6.2.
2010
Kulu, P.; Saarna, M.; Tarbe, R.; Kers, J.; Veinthal, R (2010). Materjaliõpetuse praktikumide ja kodutööde juhendid. TTU Press.
1.1.
2009
Veinthal, R.; Tarbe, R.; Kulu, P.; Käerdi, H. (2009). Abrasive erosive wear of powder steels and cermets. Wear, 267 (11), 1838−1844. DOI: 10.1016/j.wear.2009.02.021.
1.1.
2009
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H. (2009). Characterization And Prediction Of Abrasive Wear Of Powder Composite Materials. Wear, 267 (12), 2216−2222. DOI: 10.1016/j.wear.2009.08.034.
1.2.
2009
Dahms, S.; Kulu, P.; Veinthal, R.; Basler, U.; Sändig, S. (2009). Substance-to-substance joining of quartz glass. Estonian Journal of Engineering, 15 (2), 131−142. DOI: 10.3176/eng.2009.2.06.
1.2.
2009
Yaldiz, C. E.; Veinthal, R.; Gregor, A.; Georgiadis, K. (2009). Mechanical properties of thin hard coatings on TiC-NiMo substrates. Estonian Journal of Engineering, 15 (4), 329−339. DOI: 10.3176/eng.2009.4.10.
5.2.
2009
Veinthal, R.; Yaldiz, C. E.; Georgiadis, K. (2009). Mechanical properties of PVD coatings on TiC based cermets. Heat Treatment and Engineering: 1st Mediterranean Conference on Heat Treatment & Surface Engineering, Sharm El-Sheikh, Egypt 1-3.12.2009.
5.2.
2009
Surzhenkov, A.; Adoberg, E.; Podgurski, V.; Veinthal, R.; Kulu, P.; Gregor, A.; Viljus, M. (2009). Influence of surface roughness on the tribological behaviour of the PVD coatings. BALTMATTRIB-2009, Tallinn, Eesti, 22.-23. oktoober 2009. Tallinn, Eesti, 38.
1.1.
2008
Kulu, P.; Veinthal, R.; Käerdi, H.; Tarbe, R. (2008). Abrasive Wear Resistance of Powder Composites at Abrasive Erosion and Abrasive Impact Wear. Materials Science, 14 (4), 328−332.
3.1.
2008
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H. (2008). Characterization and prediction of abrasive wear of powder composite materials. Proceedings of the 13th Nordic Symposium in Tribology, Nordtrib 2008, Tampere, Finland: 13th Nordic Symposium in Tribology, Nordtrib 2008, June 10-13, 2008, Tampere, Finland. Ed. Kleemola, J.; Lehtovaara, A. Tampere University of Technology.
3.1.
2008
Antonov, M.; Kulu, P.; Sergejev, F.; Hussainova, I.; Veinthal, R. (2008). New high frequency surface fatigue wear tester: design and first results. Proceedings of the 13th Nordic Symposium in Tribology, Nordtrib 2008, Tampere, Finland: 13th Nordic Symposium in Tribology, Nordtrib 2008, June 10-13 2008, Tampere, Finland. Ed. Kleemola, J.; Lehtovaara, A. Finland: Tampere University of Technology, NT2008-87-24.
3.4.
2008
Kulu, P.; Veinthal, R.; Käerdi, H.; Tarbe, R. (2008). Abrasivity study of materials used at abrasive tests. Tribology 2008 : Proceedings of the 9th Inernational Tribology Conference: 9th Inernational Tribology Conference, University of Pretoria, South Africa, 2–4 April 2008. Ed. Vaal, PL de.; Fuller, G. South Africa: South African institute of Tribology, 3.4(1)−3.4(10).
3.4.
2008
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H.; Tarbe, R. (2008). Abrasive Wear Resistance of Powder Composite Materials: Characterization and Prediction. Tribology 2008 : Proceedings of the 9th International Tribology Conference: 9th International Tribology Conference, University of Pretoria, South Africa, 2–4 April 2008. Toim. Vaal, PL de.; Fuller, G. South Africa: South African institute of Tribology, 1.3 (1)−1.3(10).
1.1.
2007
Kulu, P.; Veinthal, R.; Käerdi, H. (2007). Characterisation and modelling of erosion wear of powder composite materials and coatings. International Journal of Materials and Product Technology, 28, 425−447.
1.1.
2007
Kulu, P.; Veinthal, R.; Saarna, M.; Tarbe, R. (2007). Surface fatigue processes at impact wear of powder materials. Wear, 263, 463−471.
3.2.
2007
Kulu, P.; Tarbe, R.; Veinthal, R (2007). Erosion and impact wear resistance of thermal sprayed coatings. Proceedings of the 20th International Conference on Surface Modification Technologies: Surface Modification Technologies, September 2006, Vienna. Ed. Sudarshan, T.S; Stiglich, J. J. Asm International, 94−99.
3.4.
2007
Veinthal, R.; Kulu, P.; Käerdi, H. (2007). Modeling of erosion wear of powder composite materials and coatings. Proceedings of the 20th International Conference of Surface Modification Technologies: Surface Modification Technologies, September 2006, Vienna. Ed. Sudarshan, T.S.; Stiglich, J. Asm International, 129−132.
1.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder metallurgical materials. Proceedings of the Estonian Academy of Sciences. Engineering, 12 (4), 377−387.
5.1.
2006
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H. (2006). Characterization of powder metal matrix composites for erosion wear applications. Extended Abstracts of Powder Metallurgy World Congress. Sept. 24-28, 2006, Busan: Powder Metallurgy World Congress. Sept. 24-28, 2006, Busan, Korea. , 1056. (Part 2).
5.2.
2006
Kommel, L.; Hussainova, I.; Veinthal, R.; Saarna, M. (2006). Stability and damage of nanocrystalline copper at cyclic elastic-plastic deformation. Ultrafine Grained Materials - from Basics to Applications: UFG - 2006, September 25 - 27, 2006, Kloster Irsee, Germany. Germany, 3-17−3-19.
5.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder materials. Proceedings of 15th International Baltic Conference Engineering Materials & Tribology : BALTMATTRIB 2006: The 15th International Baltic Conference Engineering Materials & Tribology, BALTMATTRIB 2006, Tallinn, Estonia, 5-6 Oct. 2006. , 66−68.
1.1.
2005
Kommel, L.; Veinthal, R (2005). HCV deformation - Method to study the viscoplastic behavior of nanocrystalline metallic materials. REVIEWS ON ADVANCED MATERIALS SCIENCE, 10 (5), 442−446.
1.1.
2005
Kulu, P.; Hussainova, I.; Veinthal, R (2005). Solid particle erosion of thermal sprayed coatings. Wear, 258, 488−496.
1.2.
2005
Veinthal, R.; Kulu, P.; Käerdi, H. (2005). Characterization of the structure and properties of composite powder materials and coatings. Materials Science, 11 (4), 376−380.
1.2.
2005
Podgursky, V.; Torp, B.; Traksmaa, R.; Veinthal, R.; Viljus, M.; Coddet, O.; Morstein, M.; Gregor, A.; Kulu, P. (2005). Investigation of (Ti, Al)N Based Coatings Grown by Physical Vapor Deposition. Materials Science, 11 (4), 352−355.
1.2.
2005
Tarbe, R.; Zimakov, S.; Mikli, V.; Kulu, P.; Veinthal, R. (2005). Wear resistant powder coatings on the base of recycled hardmetal. Powder Metallurgy Progress, 3, 148−157.
5.1.
2005
Kulu, P.; Veinthal, R. (2005). Characterization of the structure and modelling of wear composite with multimodal reinforcement powder materials and coatings. Proc. of 12th Intern. Conf. on Composite/Nano Engineering, ICCE-12: 12th International Conference on Composite/Nano Engineering, ICCE-12 Tenerife, Spain, 2005.
3.1.
2004
Kommel, L.; Kübarsepp, J.; Veinthal, R.; Traksmaa, R. (2004). Fabrication, Control and Properties of Nanocrystalline Copper. In: Champion, Y.; Fecht, H-J. (Ed.). Nano-Archidectured and Nanostructured Materials : Fabrication, Control and Properties (27−37). . Weinheim: Wiley-V C H Verlag Gmbh.
1.2.
2003
Kommel, L.; Veinthal, R.; Kimmari, E. (2003). The Formation of Structure and Change of Properties during Heat Treatment of Boron Carbide Cermets. Materials Science, 9 (1), 99−101.
5.2.
2003
Veinthal, R. (2003). Indentation hardness as a tool for powder coating characterization. Engineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts. Tallinn: Tallinn Technical University Press, 40−40.
1.2.
2002
Kulu, P.; Veinthal, R. (2002). Selection criteria for abrasive erosion wear resistant powder coatings. Materials Science, 8 (4), 425−429.
1.2.
2002
Kommel, L.; Kenk, K.; Veinthal, R. (2002). The copper structure and properties evolution in zone of severe plastic deformation. Materials Science, 4, 396−398.
3.1.
2002
Zimakov, S., Tarbe, R., Veinthal, R., Kulu, P. (2002). Optimization of Structure of Sprayed WC-Co Hardmetal based Coatings. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME": 3rd international DAAAM conference industrial engineering - new challenges to SME, Tallinn (Estonia), 25-27 april 2002. Ed. Papstel, J.; Katalinic, B. Tallinn: Tallinn Technical University, 224−227.
5.2.
2002
Kommel, L.; Kenk, K.; Veinthal, R. (2002). Viscoplastic Behaviour of SPD Copper. Book of Abstracts: 2nd International Conference on Nanomaterials by Severe Plastic Deformation, Fundamentals-Processing-Applications, Dec. 9-13, 2002: 2nd International Conference on Nanomaterials by Severe Plastic Deformation, Fundamentals-Processing-Applications, Dec. 9-13, 2002. University of Vienna, Materials Physics Institute.
3.4.
2001
Kommel, L.; Peetsalu, P.; Veinthal, R. (2001). Evolution of Microstructure and Properties in Ti-alloys During Rapid Electrocontact Heating with SPD. Proceedings of the X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, 2001, September 27-28. Riga Technical University, 62−66.
3.4.
2001
Kommel, L.; Veinthal, R. (2001). The Investigation of Advanced Constructional Materials and Manufacturing Technologies. X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, Latvia, 2001, September 27-28. Riga Technical University, 41−45.
3.1.
2000
Kulu, P.; Veinthal, R.; Kõo, J.; Lille, H. (2000). Mechanism of abrasion-erosion wear of sprayed coatings. In: Miannay, D.; Costa, P.; François, D.; Pineau, A. (Ed.). In: Proceedings of EUROMAT 2000 „Advances in mechanical behaviour, plasticity and damage“: 7-9 November 2000, Tours, France (651−656). . Elsevier.

Tööstusomand

9.07.2021

Renno Veinthal

https://etis.ee/CV/Renno_Veinthal/eng
24.07.1976
3726203351
37253011414
renno.veinthal@taltech.ee

Career

Institutions and positions
01.09.2021–...   
Tallinn University of Technology , School of Engineering, Department of Materials and Environmental Technology, Director (1,00)
01.09.2020–...   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , Professor (1,00)
01.01.2017–31.08.2020   
Tallinn University of Technology , School of Engineering, Department of Mechanical and Industrial Engineering , (contract temporarily suspended) (1,00)
01.09.2015–31.08.2020   
Tallinn University of Technology , Vice-Rector for Research (1,00)
01.09.2007–31.12.2016   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Professor (1,00)
01.01.2006–31.08.2007   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Senior Researcher (0,50)
01.06.2004–31.08.2007   
Tallinn University of Technology , Testing and Calibration Centre of TUT , manager (0,50)
1999–2005   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Researcher (0,50)
1996–1999   
Tallinn University of Technology , Faculty of Mechanical Engineering, Department of Materials Engineering , Chair of Materials Science, Engineer (0,50)
 
 
Education
2001–2005   
Tallinn University of Technology, production engineering, PhD
1999–2001   
Tallinn University of Technology, production engineering, MEng;
1994–1999   
Tallinn University of Technology, production engineering and transportation (five years undergraduate study)
1986–1994   
1986-1994 Tallinn Kadrioru secondary school
 
 
R&D related managerial and administrative work
2016−...   
Member of the Council of National Institute of Chemical Physics and Biophysics
2016−...   
Member of the steering committee for smart specialization
2016−...   
Center of Food and Fermentation Technologies, Council Member (representataive of TalTech)
2015−...   
Memeber of the Research Policy Committee advising Minister of Education and Research
2014−...   
Member of the Advisory Group for Horizon 2020 in Nanotechnologies, Advanced Materials, Biotechnology and Advanced Manufacturing and Processing
Estonian Welding Society, member
Estonian Materials Engineering Society, member
2016−2016   
Member of the election board for Research Professors at Estonian Academy of Sciences
2015−2016   
TUT Board of Governors, board member
2015−2015   
member of the organizing committee of the conference Baltmattrib 2015 www.ttu.ee/baltmattrib2015
2015−2020   
Member of the Senate of Tallinn University of Technology
2013−2013   
member of an Advisory Committee of a new conference Applied Magnetic Materials AMM, 23.-24.10.2013 in Pori, Finland
2013−2013   
member of the organizing commitee of sattelite conference of NT13: The Fourteenth International Conference on the Science and Application of Nanotubes
2012−2012   
member of the organizing committee of the conference Baltmattrib 2012 www.ttu.ee/baltmattrib2012
2012−2012   
steering committee of 8 th International DAAAM Baltic Conference, member
2009−2009   
organizing commitee of Baltmattrib 2009 conference, member
2007−2015   
head of the Department of TUT Materials Engineering
2001−2004   
science commitee of TUT Council, member
2001−2004   
TUT Council, member (representitavie of PhD students)
 
 
Additional information
Completed Top Management Programme training at Leadership Foundation for Higher Education (TMP40) in 2017. In 2018, the HEA merged with the Leadership Foundation and the Equality Challenge Unit to form Advance HE, www.advance-he.ac.uk.

Qualifications

Academic degrees
Renno Veinthal, Doctor's Degree, 2005, (sup) Priit Kulu, Characterization and Modelling of Erosion Wear of Powder Composite Materials and Coatings, Tallinn University of Technology Faculty of Mechanical Engineering, Department of Materials Engineering Chair of Materials Science.
 
 
Honours & awards
2020, Renno Veinthal, TUT service award "Mente et Manu"
2015, Renno Veinthal, Best estonian high-school textbook 2015 award - "Materials engineering" Parts I and II by Priit Kulu, Jakob Kübarsepp, Andres Laansoo, Renno Veinthal https://digikogu.taltech.ee/et/Item/4ab40e78-b578-4dcc-aa3e-6516e8fa33c9 ISBN: ISBN 9789949237425
2012, Renno Veinthal, Best Young Researcher Award in the Faculty of Mechanical Engineering of TUT
1999, Renno Veinthal, Estonian Science Academy prize for diploma work "Nondestructive testing of materials and products"
 
 
Fields of research
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS CLASSIFICATION: T155 Coatings and surface treatment
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS CLASSIFICATION: T152 Composite materials
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; CERCS CLASSIFICATION: T480 Technology of other products ; SPECIFICATION: magnetic materials
ETIS CLASSIFICATION: 4. Natural Sciences and Engineering; 4.12. Process Technology and Materials Science; SPECIFICATION: wear resistant materials and coatings, testing
 
 

Completed projects

Dissertations under supervision

Supervised dissertations

Publications

Category
Year
Publication
 
6.6.
2020
Veinthal, R. (2020). Renno Veinthal: tehnikaülikooli teadustöö viljakus on suurenenud. err.ee.
6.6.
2020
Veinthal, R. (2020). Renno Veinthal: Eesti teevad nutikaks insenerid. Postimees.
1.1.
2019
Holovenko, Y; Kollo, L; Jõeleht, M; Ivanov, R; Soloviova, T; Veinthal, R; (2019). Production of metal–ceramic lattice structures by selective laser melting and carburizing or nitriding. Proceedings of the Estonian Academy of Sciences, 68 (2), 131−139. DOI: 10.3176/proc.2019.2.02.
1.1.
2019
Holovenko, Yaroslav; Kollo, Lauri; Saarna, Mart; Rahmani, Ramin; Soloviova, Tetiana; Antonov, Maksim; Prashanth, Konda Gokuldoss; Cygan, Slawomir; Veinthal, Renno (2019). Effect of lattice surface treatment on performance of hardmetal - titanium interpenetrating phase composites. International Journal of Refractory Metals and Hard Materials, 105087. DOI: 10.1016/j.ijrmhm.2019.105087.
6.6.
2019
Veinthal, R. (2019). Renno Veinthal: rohkem suurepärast teadust, arvestades Eesti vajadusi. err.ee.
3.1.
2018
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Soloviova, T.; Veinthal, R. (2018). Evaluation of titanium matrix composites with additions of 5 vol. % B4C and TiC processed via Selective Laser Melting. EuroPM 2018 proceedings: Euro PM2018 Congress & Exhibition, Bilbao, Spain, 14 - 18 October 2018. European Powder Metallurgy Association (EPMA).
6.6.
2018
Veinthal, R. (2018). Kuidas suurendada teaduse ja majanduse kokkupuudet? Personaliuudised. 21.08.2018.
1.1.
2017
Mural, Z.; Kollo, L.; Xia, M.; Bahl, C. R. H.; Bech Abrahamsen, A.; Neves Bez, H.; Link, J.; Veinthal, R. (2017). The effect of nano-TiC addition on sintered Nd-Fe-B permanent magnets. Journal of Magnetism and Magnetic Materials, 429, 23−28. DOI: 10.1016/j.jmmm.2016.12.115.
6.6.
2017
Veinthal, R. (2017). Renno Veinthal: digipööre ja 10 «eluaegset» ametikohta TTÜs. Postimees. 20.04.2017.
1.1.
2016
Yung, D.-L.; Antonov, M.; Veinthal, R.; Hussainova, I. (2016). Wear behaviour of doped WC-Ni based hardmetals tested by four methods. Wear, 352-353, 171−179. DOI: 10.1016/j.wear.2016.02.015.
1.1.
2016
Mural, Z.; Kolnes, M.; Afshari, H.; Kollo, L.; Link, J.; Veinthal, R. (2016). Fabrication and microstructural analysis of Didymium-Fe-B magnet alloys with Ce additions. Proceedings of the Estonian Academy of Sciences, 65 (2), 166−171.
3.1.
2016
Holovenko, Y.; Kollo, L.; Jõeleht, M.; Pohlak, M.; Veinthal, R. (2016). Effect of Hot Isostatic Pressing on Cellular Lattice Structures Obtained by Selective Laser Melting. World PM2016 proceedings: World PM2016 Congress & Exhibition, Hamburg, Germany, 9-13 October 2016. European Powder Metallurgy Association, USB.
3.2.
2016
Mural, Z., Kollo, L., Veinthal, R. (2016). Spark Plasma Sintered Nd-Fe-B Magnets from High-Energy Ball Milled Powders. The 24th International Workshop on Rare-Earth and Future Permanent Magnets and Their Applications (REPM 16), Darmstadt, Germany, 28.08-01.09.2016. Darmstadt, Germany: Technical University of Darmstadt and Fraunhofer IWKS, 619−623.
6.6.
2016
Soomere, Tarmo; Veinthal, Renno (2016). Akadeemiline sullerlus kui akadeemilise vabaduse kuritarvitamine. Sirp, nr 6, 12. veebruar, 36−37.
6.6.
2016
Aaviksoo, J.; Veinthal, R. (2016). Tenuur kui akadeemilise vabaduse tagatis. Sirp. 23.09.2019.
1.1.
2015
Antonov, M.; Veinthal, R.; Yung, D-L.; Katušin, D.; Hussainova, I. (2015). Mapping of impact-abrasive wear performance of WC–Co cemented carbides. Wear, 332-333, 971−978. DOI: 10.1016/j.wear.2015.02.031.
1.1.
2015
Rummo, H.; Veinthal, R.; Aruniit, A. (2015). Pultruding of Metal Powder Filled Glass Fiber Reinforced Polymer Composites. In: I. Hussainova, R. Veinthal (Ed.). Engineering Materials and Tribology (48−53). Trans Tech Publications Ltd. (Key Engineering Materials; 674). DOI: 10.4028/www.scientific.net/KEM.674.48.
2.4.
2015
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Veinthal, R. (2015). Materjalitehnika : õpik kõrgkoolidele. II, Konstruktsioonimaterjalide tehnologia. Tallinn: TTÜ kirjastus.
2.4.
2015
Kulu, P.; Kübarsepp, J.; Laansoo, A.; Veinthal, R. (2015). Materjalitehnika : õpik kõrgkoolidele. I, Tehnomaterjalid. Tallinn: TTÜ kirjastus.
3.1.
2015
Pramono, A.; Kollo, L.; Kallip, K.; Veinthal, R.; Gomon, J.-K. (2015). Heat Treatment of Ultrafine Grained AA6061 Consolidation by Equal Channel Angular Pressing. In: Khairurrijal, K. T., Hidayat, S. N. (Ed.). Instrumentation and Measurement Systems (252−256). . Trans Tech Publications Ltd. (Applied Mechanics and Materials; 771). DOI: 10.4028/www.scientific.net/AMM.771.252.
3.1.
2015
Kommel, L.; Tarraste, M.; Kolnes, M.; Veinthal, R.; Kübarsepp, J. (2015).
 . Euro PM2015 Proceedings: Euro PM2015 Congress & Exibition - Heads to Reims, Champagne, France. Ed. EPMA. Reims, France: European Powder Metallurgy Association, x−x.
3.1.
2015
Veinthal, R.; Peetsalu, P.; Saarna, M.; Sergejev, F. (2015). Punch lifetime in fine-blanking with optimum combination of mechanical properties. In: Proceedings - European Conference on Heat Treatment and 22st IFHTSE Congress (1−7). . Venice, Italy: Associazione Italiana di Metallurgia (AIM).
3.1.
2015
Pramono, A.; Kollo, L.; Veinthal, R. (2015). Aluminum based composite by Novelty Process: Repetitive Press Roll Bonding (RPRB). In: S. Tursiloadi, M. Hanafi, Y. Sudiyani (Ed.). Procedia Chemistry: International Symposium on Applied Chemistry 2015 (473−479). Elsevier. (16). DOI: 10.1016/j.proche.2015.12.081.
3.4.
2015
Yung, D.; Antonov, M.; Hussainova, I.; Veinthal, R.; Hogmark, S. (2015). COMPOSITION AND STRUCTURE OF BIMODAL WC-Co MATERIALS RELATED TO MECHANICAL PROPERTIES AND ABRASIVE WEAR. 6th International Conference Mechanics and Materials in Design. Ed. J.F. Silva Gomes, Shaker A. Meguid., 253−255.
6.3.
2015
Pohlak, M.; Veinthal, R. (2015). Metallobjektide 3D printimine – uued võimalused ja väljakutsed. (2−3). .
6.3.
2015
Jõeleht, M.; Kollo, L.; Pohlak, M.; Veinthal, R. (2015). Uued võimalused 3D-printimise valdkonnas- metallide printimine peagi võimalik ka Eestis. (32−35). .
1.1.
2014
Kulu, P.; Käerdi, H.; Surzenkov, A.; Tarbe, R.; Veinthal, R.; Goljandin, D.; Zikin, A. (2014). Recycled hardmetal-based powder composite coatings: optimisation of composition, structure and properties. International Journal of Materials and Product Technology, 49, 180−202. DOI: 10.1504/IJMPT.2014.064038.
3.1.
2014
Taaber, Triinu; Põhako-Esko, Kaija; Joost, Urmas; Külasalu, Kadi; Antsov, Mikk; Antonov, Maksim; Veinthal, Renno; Saal, Kristjan; Lõhmus, Rünno; Mäeorg, Uno. (2014). Covalent coupling of ionic liquid to carbon nanotubes: preparation and tribological properties. MRS Proceedings "Semiconductor Nanowires—Synthesis, Properties and Applications", 1707: MRS Spring Meeting, San Francisco, California, April, 2014. Ed. Yong Zhu. Materials Research Society, UU06−30. DOI: 10.1557/opl.2014.539.
3.1.
2014
Pramono, A.; Kollo, L.; Veinthal, R.; Kallip, K.; Gomon, J.-K. (2014). Heat Treatment of Ultrafine Grained High-Strength Aluminum Alloy. D. Loca (Toim.). Engineering Materials & Tribology XXII (273−276). . Trans Tech Publications Ltd. (Key Engineering Materials; 604). DOI: 10.4028/www.scientific.net/KEM.604.273.
3.1.
2014
Mural, Z.; Kollo, L.; Traksmaa, R.; Kallip, K.; Link, J.; Veinthal, R. (2014). Structure and Magnetic Properties of NdFeB Powder Prepared by Hydrogen Decrepitation and High-energy Ball Milling. In: D. Loca (Ed.). Engineering Materials & Tribology XXII (262−268). . Trans Tech Publications Ltd. (Key Engineering Materials; 604).
3.1.
2014
Lille, H.; Kõo, J.; Valgur, J.; Ryabchikov, A.; Reitsnik, R.; Veinthal, R. (2014). Measurement of residual stresses in the cold-rolled Fe-Ni-Mn/Invar thermo-bimetallic plate. In: Materials Science Forum (101−106). Trans Tech Publications Ltd.
3.4.
2014
Fridrici, V.; Antonov, M.; Dubujet, P.; Taboulet, A.; Marou-Alzouma, O.; Katushin, D.; Yung, D.-L.; Méité, M.; Chaze, M., Kapsa, P.; Veinthal, R.; Hussainova, I.; Camus, T. (2014). NeTTUN project: how to increase the lifetime of TBM drag bits? 2nd Eastern European Tunnelling Conference (EETC2014), Athens, September 28 – October 1, 2014. Ed. I. Bakogiannis.
3.4.
2014
Pramono, A.; Kollo, L.; Kallip, K.; Veinthal, R.; Gomon, JK. (2014). Processing Nano Powder Aluminum by Equal Channel Angular Pressing. PROCEEDING Indonesian Student Scientific Conference “Toward Sustainability and Quality of Life, 66−76.
3.4.
2014
Veinthal, R.; Peetsalu, P.; Saarna, M.; Talkop, A. (2014). Durability of Complex Shape Punch in Thick Sheet Metal Fine-blanking. Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress, May 12th-15th, Munich, Germany. Ed. H-W. Zoch, R. Schneider, T. Lübben. Munich, Germany: Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.V (AWT); www.awt-online.org, 399−406.
3.4.
2014
Mural, Z.; Kollo, L.; Veinthal, R. (2014). Jet Milling of the Powders for the Nd-Fe-B Sintered Magnets. 2014 International Conference on NdFeB Magnets: Supply Chain, Critical Properties & Applications: 2014 International Conference on NdFeB Magnets: Supply Chain, Critical Properties & Applications, Ningbo, China, 02-05.03.2014. Ed. S. Gu; C. H. Chen. Ningbo, China, 181−183.
1.1.
2013
Veinthal, R.; Sergejev, F.; Zikin, A.; Tarbe, R.; Hornung, J. (2013). Abrasive impact wear and surface fatigue wear behaviour of Fe-Cr-C PTA overlays. Wear, 301, 102−108. DOI: 10.1016/j.wear.2013.01.077.
1.1.
2013
Antonov, M.; Veinthal, R.; Huttunen-Saarivirta, E.; Hussainova, I.; Vallikivi, A.; Lelis, M.; Priss, J. (2013). Effect of oxidation on erosive wear behaviour of boiler steels. Tribology International, 68, 35−44. DOI: 10.1016/j.triboint.2012.09.011.
3.1.
2013
Lille, H.; Kõo, J.; Ryabchikov, A.; Reitsnik, R.; Veinthal, R.; Mikli, V.; Sergejev, F. (2013). Investigation of residual stresses and some elastic properties of brush-plated gold and silver coatings. In: Hussainova, I. (Ed.). Engineering Materials and Tribology (125−130). Trans Tech Publications Ltd. (Key Engineering Materials; 527). DOI: 10.4028/www.scientific.net/KEM.527.125.
3.4.
2013
Mural, Z.; Kollo, L.; Kallip, K.; Traksmaa, R.; Veinthal, R. (2013). High-energy ball milling of Nd-Fe-B powders. Applied Magnetic Materials 2013, Pori, Finland, 24.-25.10.2013. Tampere University of Technology.
1.1.
2012
Lille, H.; Kõo, J.; Ryabchikov, A.; Veinthal, R.; Mikli, V.; Sergejev, F. (2012). Determination of modulus of elasticity, nanohardness and residual stresses in brush-plated gold and silver coatings on copper substrate. Materials Science, 18 (1), 51−56.
1.1.
2012
Šin, P.; Veinthal, R.; Sergejev, F.; Antonov, M.; Stubna, I. (2012). Fracture Toughness of Ceramics Fired at Different Temperatures. Materials Science, 18 (1), 90−93. DOI: 10.5755/j01.ms.18.1.1349.
1.1.
2012
Antonov, M.; Hussainova, I.; Veinthal, R.; Pirso, J. (2012). Effect of temperature and load on three-body abrasion of cermets and steel. Tribology International, 46 (1), 261−268. DOI: 10.1016/j.triboint.2011.06.029.
1.2.
2012
Huttunen-Saarivirta, E.; Kuokkala, V.-T.; Antonov, M.; Veinthal, R.; Tuiremo, J.; Mäkela, K. (2012). Erosion-Oxidation of Pressure Vessel Steel P265GH. Finnish Journal of Tribology, 31, 11−19.
1.2.
2012
Talalaev, R.; Veinthal, R.; Laansoo, A.; Sarkans, M. (2012). Cold Metal Transfer (CMT) Welding of thin Sheet Metal Products. Estonian Journal of Engineering, 18 (3), 243−250.
1.2.
2012
Veinthal, R.; Kulu, P.; Žikin, A.; Sarjas, H.; Antonov, M.; Podgurski, V.; Adoberg, E. (2012). Coatings and surface engineering. Industry oriented research. Estonian Journal of Engineering, 18 (3), 176−184. DOI: 10.3176/eng.2012.3.02.
1.2.
2012
Lind, L.; Adoberg, E.; Aarik, L.; Kulu, P.; Veinthal, R.; Aal, A. A. (2012). Tribological properties of PVD coatings with lubricating films. Estonian Journal of Engineering, 18 (3), 193−201.
3.1.
2012
Talalaev, R.; Sarkans, M.; Laansoo, A.; Veinthal, R. (2012). Methodology for Configuration of Robot Welding Cell for SMEs Under Conditions of Small and Medium Sized Production Using MIG/MAG Process. Proceedings of the 8th International Conference of DAAAM Baltic Industrial Engineering 19-21st April 2012, Tallinn, Estonia, 2: 8th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 19-21 April 2012. Ed. T. Otto. Tallinn: Tallinna Tehnikaülikooli Kirjastus, 591−596.
3.1.
2012
Lille, H.; Ryabchikov, A.; Kõo, J.; Reitsnik, R.; Veinthal, R.; Mikli, V.; Sergejev, F. (2012). Comparison of values of residual stresses determined by various methods in hard nickel coatings prepared by brush-plating in sulfate solution. Proceedings of the 8th International Conference of DAAAM Baltic, Industrial Engineering: 8th International DAAAM Baltic Conference, Tallinn, Estonia, 19-21 April 2012. Ed. T. Otto. Tallinn: Tallinn University of Technology, 680−687.
6.2.
2012
Herranen, H.; Karjust, K.; Kers, J.; Krustok, J.; Kulu, P.; Käerdi, H.; Laansoo, A.; Lend, H.; Otto, T.; Põdra, P.; Riives, J.; Saarna, M.; Sergejev, F.; Tiidemann, T.; Veinthal, R. (tõlkijad) (2012). Mehhanotehnika ja metallide käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
6.7.
2012
Herranen, H.; Karjust, K.; Kers, J.; Krustok, J.; Kulu, P.; Käerdi, H.; Laansoo, A.; Lend, H.; Otto, T.; Põdra, P.; Riives, J.; Saarna, M.; Sergejev, F.; Tiidemann, T.; Veinthal, R. [tõlkijad] (2012). Mehaanikainseneri käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
1.1.
2011
Kollo, L.; Bradbury, C.; Veinthal, R.; Jäggi, C.; Carreño-Morelli, E.; Leparoux, M. (2011). Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidation. Materials Science and Engineering A, 528 (21), 6606−6615. DOI: 10.1016/j.msea.2011.05.037.
1.1.
2011
Veinthal, R.; Kulu, P.; Käerdi, H. (2011). Microstructural aspects of abrasive wear of composite powder materials and coatings. International Journal of Materials and Product Technology, 40, 92−119. DOI: 10.1504/IJMPT.2011.037208.
1.2.
2011
Veinthal, R.; Sergejev, F.; Yaldiz, C. E.; Mikli, V. (2011). Impact Wear Performance of Thin Hard Coatings on TiC Cermets. Journal of ASTM International, 8 (7), 10 pp. DOI: 10.1520/JAI103272.
3.1.
2011
Ryabchikov, Alexander; Lille, Harri; Toropov, Stanislav; Kõo, Jakub; Pihl, Toomas; Veinthal, Renno (2011). Determination of residual stresses in thermal and cold sprayed coatings by the hole-drilling method. Materials Science Forum, 681, 171−176.
3.2.
2011
Antonov, M.; Hussainova, I.; Kers, J.; Kulu, P.; Kübarsepp, J.; Veinthal, R. (2011). Advanced multifunctional materials and their applications. In: Research in Estonia. Present and Future. (146−167). . Estonian Academy of Sciences.
3.2.
2011
Šin, P.; Veinthal, R.; Sergejev, F.; Antonov, M.; Stubna, I. (2011). Vickers hardness of ceramics fired at different temperatures. PhD Students, Young Scientists and Pedagogues Conference Proceedings, 473: 12th International scientific conference of PhD. students, young scientists and pedagogues; Nitra, Slovakia; 21-22 September 2011. Ed. Mgr. David Turčáni. Edícia Prírodovedec, 565−570.
3.2.
2011
Veinthal, R.; Antonov, M. (2011). Effect of Temperature on Erosive and Abrasive Wear of Carbide Reinforced Powder Steels. Tribology 2011: Tenth International Tribology Conference of the South American Institute of Tribology, Pretoria, South Africa, April 5-7. Ed. PL de Vaal, G. Fuller. American Institute of Tribology, 104−111.
6.2.
2011
Kers, J.; Veinthal, R. (2011). Komposiitmaterjalide töötlemine. Uuenduslik tootmine (257−283). . Tallinna Tehnikaülikooli Kirjastus.
6.2.
2011
Karjust, K.; Kers, J.; Kiolein, I.; Kokla, M.; Küttner, R.; Lavin, J.; Lavrentjev, J.; Lumiste, R.; Lõun, K.; Mõtus, L.; Naams, I.; Otto, T.; Pohlak, M.; Raba, K.; Riives, J.; Reedik, V.; Roosimölder, L.; Saks, A.; Talkop, A.; Tähemaa, T. ... Veinthal, R. (2011). Uuenduslik tootmine : käsiraamat. Tallinn: Tallinna Tehnikaülikooli Kirjastus.
3.1.
2010
Lind, L.; Peetsalu, P.; Põdra, P.; Adoberg, E.; Veinthal, R.; Kulu, P. (2010). Description of Punch Wear Mechanism During Fine Blanking Process. Proceedings of 7th International Conference of DAAAM Baltic Industrial Engineering, 2: 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, 22-24 April 2010. Ed. Küttner, R. Tallinn: Tallinn University of Technology Press, 504−509.
3.1.
2010
Lille, H.; Kõo, J.; Ryabchikov, A.; Toropov, S.; Veinthal, R.; Surzhenkov, A. (2010). Comparative analysis of residual stresses in flame-sprayed and electrodeposited coatings using substrate deformation and hole-drilling methods. Proceedings of the 7th International Conference of DAAAM Baltic, Industrial Engineering: 7th International Conference of DAAAM Baltic, Industrial Engineering, Tallinn, Estonia, April 22-24, 2010. Ed. R. Kyttner. Tallinn: Tallinn University of Technology, 474−479.
3.4.
2010
Veinthal, R.; Sergejev, F.; Yaldiz, C. E.; Mikli, V. (2010). Impact Wear Performance of Thin Hard Coatings on TiC Cermets. 18th Congress IFHTSE International Federation for Heat Treatment and Surface Engineering 18th Congress, July 26th - 30th, 2010 – Rio de Janeiro. Ed. Karlheinz Pohlmann, Nelson Guedes de Alcantara. Rio de Janeiro.
5.2.
2010
Surzhenkov, A.; Podgurski, V.; Viljus, M.; Adoberg, E.; Nanits, M.; Kulu, P.; Veinthal, R. (2010). Influence of drag finishing to dry sliding wear behaviour of PVD nanocomposite NaCo(R) coating during running-in. Proceedings of the XIX-th International Baltic Conference "Materials Engineering & Balttrib-2010": 19th International Baltic Conference "Materials Engineering & Balttrib-2010". Ed. J. Grabis, J. Krastins. Riga Technical University, 26.
6.2.
2010
Kulu, P.; Saarna, M.; Tarbe, R.; Kers, J.; Veinthal, R (2010). Materjaliõpetuse praktikumide ja kodutööde juhendid. TTU Press.
1.1.
2009
Veinthal, R.; Tarbe, R.; Kulu, P.; Käerdi, H. (2009). Abrasive erosive wear of powder steels and cermets. Wear, 267 (11), 1838−1844. DOI: 10.1016/j.wear.2009.02.021.
1.1.
2009
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H. (2009). Characterization And Prediction Of Abrasive Wear Of Powder Composite Materials. Wear, 267 (12), 2216−2222. DOI: 10.1016/j.wear.2009.08.034.
1.2.
2009
Dahms, S.; Kulu, P.; Veinthal, R.; Basler, U.; Sändig, S. (2009). Substance-to-substance joining of quartz glass. Estonian Journal of Engineering, 15 (2), 131−142. DOI: 10.3176/eng.2009.2.06.
1.2.
2009
Yaldiz, C. E.; Veinthal, R.; Gregor, A.; Georgiadis, K. (2009). Mechanical properties of thin hard coatings on TiC-NiMo substrates. Estonian Journal of Engineering, 15 (4), 329−339. DOI: 10.3176/eng.2009.4.10.
5.2.
2009
Veinthal, R.; Yaldiz, C. E.; Georgiadis, K. (2009). Mechanical properties of PVD coatings on TiC based cermets. Heat Treatment and Engineering: 1st Mediterranean Conference on Heat Treatment & Surface Engineering, Sharm El-Sheikh, Egypt 1-3.12.2009.
5.2.
2009
Surzhenkov, A.; Adoberg, E.; Podgurski, V.; Veinthal, R.; Kulu, P.; Gregor, A.; Viljus, M. (2009). Influence of surface roughness on the tribological behaviour of the PVD coatings. BALTMATTRIB-2009, Tallinn, Eesti, 22.-23. oktoober 2009. Tallinn, Eesti, 38.
1.1.
2008
Kulu, P.; Veinthal, R.; Käerdi, H.; Tarbe, R. (2008). Abrasive Wear Resistance of Powder Composites at Abrasive Erosion and Abrasive Impact Wear. Materials Science, 14 (4), 328−332.
3.1.
2008
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H. (2008). Characterization and prediction of abrasive wear of powder composite materials. Proceedings of the 13th Nordic Symposium in Tribology, Nordtrib 2008, Tampere, Finland: 13th Nordic Symposium in Tribology, Nordtrib 2008, June 10-13, 2008, Tampere, Finland. Ed. Kleemola, J.; Lehtovaara, A. Tampere University of Technology.
3.1.
2008
Antonov, M.; Kulu, P.; Sergejev, F.; Hussainova, I.; Veinthal, R. (2008). New high frequency surface fatigue wear tester: design and first results. Proceedings of the 13th Nordic Symposium in Tribology, Nordtrib 2008, Tampere, Finland: 13th Nordic Symposium in Tribology, Nordtrib 2008, June 10-13 2008, Tampere, Finland. Ed. Kleemola, J.; Lehtovaara, A. Finland: Tampere University of Technology, NT2008-87-24.
3.4.
2008
Kulu, P.; Veinthal, R.; Käerdi, H.; Tarbe, R. (2008). Abrasivity study of materials used at abrasive tests. Tribology 2008 : Proceedings of the 9th Inernational Tribology Conference: 9th Inernational Tribology Conference, University of Pretoria, South Africa, 2–4 April 2008. Ed. Vaal, PL de.; Fuller, G. South Africa: South African institute of Tribology, 3.4(1)−3.4(10).
3.4.
2008
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H.; Tarbe, R. (2008). Abrasive Wear Resistance of Powder Composite Materials: Characterization and Prediction. Tribology 2008 : Proceedings of the 9th International Tribology Conference: 9th International Tribology Conference, University of Pretoria, South Africa, 2–4 April 2008. Toim. Vaal, PL de.; Fuller, G. South Africa: South African institute of Tribology, 1.3 (1)−1.3(10).
1.1.
2007
Kulu, P.; Veinthal, R.; Käerdi, H. (2007). Characterisation and modelling of erosion wear of powder composite materials and coatings. International Journal of Materials and Product Technology, 28, 425−447.
1.1.
2007
Kulu, P.; Veinthal, R.; Saarna, M.; Tarbe, R. (2007). Surface fatigue processes at impact wear of powder materials. Wear, 263, 463−471.
3.2.
2007
Kulu, P.; Tarbe, R.; Veinthal, R (2007). Erosion and impact wear resistance of thermal sprayed coatings. Proceedings of the 20th International Conference on Surface Modification Technologies: Surface Modification Technologies, September 2006, Vienna. Ed. Sudarshan, T.S; Stiglich, J. J. Asm International, 94−99.
3.4.
2007
Veinthal, R.; Kulu, P.; Käerdi, H. (2007). Modeling of erosion wear of powder composite materials and coatings. Proceedings of the 20th International Conference of Surface Modification Technologies: Surface Modification Technologies, September 2006, Vienna. Ed. Sudarshan, T.S.; Stiglich, J. Asm International, 129−132.
1.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder metallurgical materials. Proceedings of the Estonian Academy of Sciences. Engineering, 12 (4), 377−387.
5.1.
2006
Veinthal, R.; Kulu, P.; Pirso, J.; Käerdi, H. (2006). Characterization of powder metal matrix composites for erosion wear applications. Extended Abstracts of Powder Metallurgy World Congress. Sept. 24-28, 2006, Busan: Powder Metallurgy World Congress. Sept. 24-28, 2006, Busan, Korea. , 1056. (Part 2).
5.2.
2006
Kommel, L.; Hussainova, I.; Veinthal, R.; Saarna, M. (2006). Stability and damage of nanocrystalline copper at cyclic elastic-plastic deformation. Ultrafine Grained Materials - from Basics to Applications: UFG - 2006, September 25 - 27, 2006, Kloster Irsee, Germany. Germany, 3-17−3-19.
5.2.
2006
Saarna, M.; Kulu, P.; Veinthal, R.; Tarbe, R. (2006). Study of surface fatigue of wear resistant powder materials. Proceedings of 15th International Baltic Conference Engineering Materials & Tribology : BALTMATTRIB 2006: The 15th International Baltic Conference Engineering Materials & Tribology, BALTMATTRIB 2006, Tallinn, Estonia, 5-6 Oct. 2006. , 66−68.
1.1.
2005
Kommel, L.; Veinthal, R (2005). HCV deformation - Method to study the viscoplastic behavior of nanocrystalline metallic materials. REVIEWS ON ADVANCED MATERIALS SCIENCE, 10 (5), 442−446.
1.1.
2005
Kulu, P.; Hussainova, I.; Veinthal, R (2005). Solid particle erosion of thermal sprayed coatings. Wear, 258, 488−496.
1.2.
2005
Veinthal, R.; Kulu, P.; Käerdi, H. (2005). Characterization of the structure and properties of composite powder materials and coatings. Materials Science, 11 (4), 376−380.
1.2.
2005
Podgursky, V.; Torp, B.; Traksmaa, R.; Veinthal, R.; Viljus, M.; Coddet, O.; Morstein, M.; Gregor, A.; Kulu, P. (2005). Investigation of (Ti, Al)N Based Coatings Grown by Physical Vapor Deposition. Materials Science, 11 (4), 352−355.
1.2.
2005
Tarbe, R.; Zimakov, S.; Mikli, V.; Kulu, P.; Veinthal, R. (2005). Wear resistant powder coatings on the base of recycled hardmetal. Powder Metallurgy Progress, 3, 148−157.
5.1.
2005
Kulu, P.; Veinthal, R. (2005). Characterization of the structure and modelling of wear composite with multimodal reinforcement powder materials and coatings. Proc. of 12th Intern. Conf. on Composite/Nano Engineering, ICCE-12: 12th International Conference on Composite/Nano Engineering, ICCE-12 Tenerife, Spain, 2005.
3.1.
2004
Kommel, L.; Kübarsepp, J.; Veinthal, R.; Traksmaa, R. (2004). Fabrication, Control and Properties of Nanocrystalline Copper. In: Champion, Y.; Fecht, H-J. (Ed.). Nano-Archidectured and Nanostructured Materials : Fabrication, Control and Properties (27−37). . Weinheim: Wiley-V C H Verlag Gmbh.
1.2.
2003
Kommel, L.; Veinthal, R.; Kimmari, E. (2003). The Formation of Structure and Change of Properties during Heat Treatment of Boron Carbide Cermets. Materials Science, 9 (1), 99−101.
5.2.
2003
Veinthal, R. (2003). Indentation hardness as a tool for powder coating characterization. Engineering Materials & Tribology : BALTMATTRIB - 2003 : 12th International Baltic Conference : October 2-3, 2003, Tallinn, Estonia : abstracts. Tallinn: Tallinn Technical University Press, 40−40.
1.2.
2002
Kulu, P.; Veinthal, R. (2002). Selection criteria for abrasive erosion wear resistant powder coatings. Materials Science, 8 (4), 425−429.
1.2.
2002
Kommel, L.; Kenk, K.; Veinthal, R. (2002). The copper structure and properties evolution in zone of severe plastic deformation. Materials Science, 4, 396−398.
3.1.
2002
Zimakov, S., Tarbe, R., Veinthal, R., Kulu, P. (2002). Optimization of Structure of Sprayed WC-Co Hardmetal based Coatings. Proceedings of the 3rd International Conference "Industrial Engineering - New Challenges to SME": 3rd international DAAAM conference industrial engineering - new challenges to SME, Tallinn (Estonia), 25-27 april 2002. Ed. Papstel, J.; Katalinic, B. Tallinn: Tallinn Technical University, 224−227.
5.2.
2002
Kommel, L.; Kenk, K.; Veinthal, R. (2002). Viscoplastic Behaviour of SPD Copper. Book of Abstracts: 2nd International Conference on Nanomaterials by Severe Plastic Deformation, Fundamentals-Processing-Applications, Dec. 9-13, 2002: 2nd International Conference on Nanomaterials by Severe Plastic Deformation, Fundamentals-Processing-Applications, Dec. 9-13, 2002. University of Vienna, Materials Physics Institute.
3.4.
2001
Kommel, L.; Peetsalu, P.; Veinthal, R. (2001). Evolution of Microstructure and Properties in Ti-alloys During Rapid Electrocontact Heating with SPD. Proceedings of the X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, 2001, September 27-28. Riga Technical University, 62−66.
3.4.
2001
Kommel, L.; Veinthal, R. (2001). The Investigation of Advanced Constructional Materials and Manufacturing Technologies. X-th International Baltic Conference, Materials Engineering & Balttrib 2001: X-th International Baltic Conference, Materials Engineering & Balttrib, Jurmala, Latvia, 2001, September 27-28. Riga Technical University, 41−45.
3.1.
2000
Kulu, P.; Veinthal, R.; Kõo, J.; Lille, H. (2000). Mechanism of abrasion-erosion wear of sprayed coatings. In: Miannay, D.; Costa, P.; François, D.; Pineau, A. (Ed.). In: Proceedings of EUROMAT 2000 „Advances in mechanical behaviour, plasticity and damage“: 7-9 November 2000, Tours, France (651−656). . Elsevier.

Industrial property

9.07.2021

Otsi projekti

  • {{item.Name}}
Asutus on projekti finantseerija   Asutus on projekti teostaja  
  • {{searchListItem.Name}}
Kõik   Tavaprojektid   Ülemprojektid   Alamprojektid  
Uus Frascati (2015)
Uus ja vana Frascati (otsing uue järgi väljastab ka seotud vanad)
Kõik
Käimasolevad
Lõppenud
Algus
Hajus
Täpne
Uus otsing (Beetaversioon) Lihtotsing Tühjenda
  • Leitud 32 kirjet
ProgrammLiikNumberNimiProjekti algusProjekti lõppVastutav täitjaAsutusFinantseerijapoolne rahastamine
IUTIUT19-29 Mitmeastmeliselt struktureeritud keraamika-baasil komposiitmaterjalid kasutamiseks ekstreemtingimustes 01.01.201431.12.2019Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond; Tallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 1 770 000,00 EUR
MUUV689Balti infrastruktuuri teadusuuringute, tehnoloogia ja innovatsiooni platvorm (BIRTI platvorm)14.10.201413.12.2015Tauno OttoTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehaanikateaduskonna dekanaat7 726,60 EUR
MUUAR12135Elektroketruse teel valmistatud ja süsinik-nanotorudega armeeritud nanokiud ning lõngad16.03.201230.06.2015Andres KrummeTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Keemia ja materjalitehnoloogia teaduskond, Polümeermaterjalide instituut, Polümeeride tehnoloogia õppetool740 847,90 EUR
1.2.2.1.VFP21025Innovatsiooni edendamine kiirenditeaduses ja -tehnoloogias01.05.202130.04.2025Tauno OttoTallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 25 000,00 EUR
MUUVE472Kaasaegsed mitmefaasilised tribomaterjalid01.04.201031.03.2014Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool140 000,00 EUR
MUUBF69Katseseade erosiooni uurimiseks kõrgetel temperatuuridel01.11.200730.04.2008Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool8 052,87 EUR
MUULep9111Keevitustehnoloogia arendamine ja keevitusprotsesside automatiseerimine21.09.200930.06.2012Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool12 782,33 EUR
MUUV361Kermised kiirestikuluvate masinaosade valmistamiseks01.01.200731.12.2008Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool84 199,95 EUR
MUUV235Keskkonna mõju pulbermaterjalide ja pinnete kulumiskindlusele01.02.200430.09.2006Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool12 782,33 EUR
ETFETF7227Komposiitmaterjalide ja -pinnete kulumiskindluse modelleerimine01.01.200731.12.2009Renno VeinthalTallinna Tehnikaülikool, Mehaanikateaduskond23 382,46 EUR
MUUBF120Konverentsi Baltmattrib 2009 korraldamine01.01.200931.12.2009Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool4 473,82 EUR
SFSF0142505s03Kulumiskindlad materjalid ja kulumine01.01.200331.12.2007Jakob KübarseppTallinna Tehnikaülikool, Mehaanikateaduskond668 100,42 EUR
MUUVE383Kõrgetemperatuursed laagrimaterjalid18.06.200814.11.2008Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool4 154,26 EUR
MUUAR12129Kõrgtehnoloogilised ioonvedeliku/nanoosakeste komposiidil baseeruva kulumiskindlad kattekihid tööstuslikeks rakendusteks01.08.201230.06.2015Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut80 196,00 EUR
SFSF0140091s08Kõvapinded ja pinnatehnika01.01.200831.12.2013Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond705 840,56 EUR
MUUV301Materjalide löökkulumise uurimine01.11.200530.04.2006Priit KuluTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool3 080,54 EUR
MUUG4843 (ETF4843)Materjalide viskoplastsete parameetrite määramine ja optimeerimine tsüklilisel deformeerimisel01.01.200131.12.2002Kalju KenkTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Mehhatroonikainstituut, Masinamehaanika õppetool6 582,90 EUR
MUULep8123Metalliõpetuse ja metallide tehnoloogia terminoloogia02.09.200831.12.2008Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool1 917,35 EUR
MUUBF130Moodulkonstruktsiooniga multifunktsionaalne seade hõõrdumis-, adhesioon- ja kulumisprotsesside (s.h. ka määrdeainete mõju) demonstreerimiseks ja uurimistöö läbiviimiseks01.11.200901.05.2010Maksim AntonovTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Metallide tehnoloogia õppetool3 195,58 EUR
ETFETF8472Nanoosakeste valmistustehnoloogia möju metallmaatriks nanokomposiitide omadustele01.01.201031.12.2012Lauri KolloTallinna Tehnikaülikool, Mehaanikateaduskond36 813,44 EUR
SFSF0142082s02Pihustus- ja sadestuspinded (materjalid, tehnoloogia, omadused)01.01.200231.12.2005Priit KuluTallinna Tehnikaülikool, Mehaanikateaduskond290 861,92 EUR
MUUAR12131Püsimagnetid jätkusuutliku energeetika rakendustes (MagMat).17.03.201230.06.2015Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut; Tallinna Tehnikaülikool, Energeetikateaduskond, Elektrotehnika instituut425 929,00 EUR
MUUF8104Rööbaste ekspluatatsioonikriteeriumid ja liitetehnoloogia01.10.200831.03.2009Jaan KersTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool11 116,92 EUR
1.2.3.4.VFP17063Strateegilised investeeringud Euroopa tootmises globaalsete väljakutsete võitmiseks01.09.201631.03.2018Tauno OttoTallinna Tehnikaülikool, Inseneriteaduskond, Mehaanika ja tööstustehnika instituut 600 000,00 EUR
MUULep10047Survetöötluse valdkonna ja komposiitmaterjalide tehnoloogia määratlused ja terminid29.04.201010.01.2011Renno VeinthalTallinna Tehnikaülikool; Tallinna Tehnikaülikool, Mehaanikateaduskond, Materjalitehnika instituut, Materjaliõpetuse õppetool1 278,23 EUR